Linksys Wireless Router :: E3200 IP Address To Hook Up To Nintendo DS Lite
Jun 11, 2012I have a Linksys E3200 and I need a IP address to hook up to A Nintendo DS lite. it requires a WFC and I have trouble connecting to it .
View 6 Replies
ADVERTISEMENT
Linksys Wireless Router :: E3200 Client List Only Shows MAC Address
Feb 15, 2012I could get a list of clients on the E3200 wireless (or wired) ports. I have my E3200 setup as a WAP LAN-LAN off a switch and it is not the DHCP server on the network. I can see a list of MACs on the client list, but no client names and no IP addresses. They are definitely named and show up on the WRT54GL (DHCP and NAT) as devices
View 5 Replies View RelatedLinksys Wireless Router :: E4200 / Nintendo DS Compatibility?
Feb 28, 2012If the two are compatable, how exactly do I go about setting them up, without compromising my security settings? Whenever I search for a wireless signal on my DS, I come across the router but it's locked and when I attempt to sign on to wifi in my games, I recieve error code 20100.
View 6 Replies View RelatedLinksys Wireless Router :: Nintendo Ds Won't Connect E1550
Oct 22, 2011i have a linksys e1550 router and ive been trying to look up a way to make it connect with my nintendo ds lite
View 3 Replies View RelatedLinksys Wireless Router :: E3000 - How To Connect Nintendo DS
Feb 21, 2011E3000 uses WPA secutiry...Nintendo DS ONLY works with WEP security.
Can I change my E3000 to WEP? on a Nintendo support site per this issue, it says:
Routers using the Cisco Connect software default to WPA security, which is not compatible with online multiplayer with Nintendo DS Game Cards. To change your wireless security mode to WEP, you will need to use your router's web utility instead of Cisco Connect.
A) is that true
B) if so....HOW?
Bottom line, I NEED to be able to do this. If it's not possible, than I made a very bad purchase decision & will never do so again
Linksys Wireless Router :: E1200 And Nintendo 3DS Internet Connection?
Jul 31, 2012I recently was able to obtain my son's Nintendo 3DS from him and now I can't figure out how to get on the internet browser with it!When I open up the internet on his 3DS and when I try to access anything it says communication error even though I have a full signal. It also says that the "error code is: 012-1018 Connection to proxy server failed. Please check that your proxy server settings are correct." I have went in and tried to change the proxy server settings and if I do I lose the internet connection despite the fact that the correct information is set in place. I even tried to reset the router (as my son did before) but I can't access it, even though he was able to!! I have done research on the Nintendo web site and everything that it says to do I have done and it shows that I have a full signal but after that no luck.
View 2 Replies View RelatedLinksys Wireless Router :: Hook-up IP Camera To WWRT54
Mar 1, 2012I can not connect from a remote location it connects from my home computer wirelessly but not from a remote location?(A) By default, the HTTP port on the camera is port 80. You will need to open TCP port 80 on your router to the IP address of the camera?
View 2 Replies View RelatedLinksys Wireless Router :: Hook Up 3TB External HDD To EA6500 - Shows 746.51 GB
Nov 24, 2012I formatted my new 3TB External hard drive on my computer and it shows close to 3TB space. Now when I hook it up to EA6500 router, it shows on 746.51 GB total. I have latest firmware installed.
View 8 Replies View RelatedLinksys Wireless Router :: E2500 - Screen Says Hook Everything Up After Popping In Installation CD
Jan 7, 2012After popping in the installation CD, the screen says hook everything up, which I do. Then click next, where it says "Searching Networks", then quickly changes to "Connecting to Network", and then it says it "Cannot Find Router.". Err. Check setup, etc.If I hook up directly to new router VIA internet cable. Also, this is strange: When I just open up a web browser and try to log into the router 192.168.1.1, using no user name, administration as the password, it won't let me in to the router. Even after I have reset the router with a pen.
View 1 Replies View RelatedLinksys Wireless Router :: E1000 - Unable To Hook Up Vizio Dvd Player To Wifi?
Jan 28, 2012I am unable to get this to hook up my vizio dvd player to wifi
View 2 Replies View RelatedLinksys Wireless Router :: EA3500 Unable To Hook Up 2 Storage External HDD And 1 USB Printer
Apr 20, 2012I recently bought EA3500 router. I am not able to hook up 2 storage external HDD and 1 USB printer usnig the router.I am connecting all 3 to a USB hub which i am connecting to the router.
View 1 Replies View RelatedHow To Hook Up Linksys DSL Router To Att Modem
Sep 2, 2011I have an older model linksys router and a motorola att modem. I can't get an internet connection
View 2 Replies View RelatedLinksys Wireless Router :: Set Up E3200 As WAP?
Aug 3, 2012Trying to convert a spare router (Linksys E3200) into a wireless access point toextend my wireless coverage. I thought knew how to do this but having a problem.Steps I followed are:1. Disable the E3200 DHCP server2. Change E3200ip address from 192.168.1.1 to something else3. Disable the firewall4.Make wireless settings5. Connect it lan port to lan port with primaryrouter.The problem I am having is that after I finish step 2 the routerreboots with the browser trying to access it at the new ip address. But thebrowser will not connect.I am doing this on a laptop that is disconnected from my network while I am working on the E3200. It is connected byan ethernet cable to an E3200 lan port. I also tried it wireless with the same result. Browser will not connect at any ip address except 192.168.1.1 and then only after I factory reset the beast to regain the 192.168.1.1 ip address
View 3 Replies View RelatedLinksys Wireless Router :: E3200 Only Getting 130.0 Mbps?
Jun 21, 2011after messing with it for a 2 days since I got it I cant seem to get more than 130.0 my last router had 300 same setup same distance
View 9 Replies View RelatedLinksys Wireless Router :: E3200 - Connect USB Hub?
Oct 18, 2011I just ordered the E3200. It's suppose to ship today. I know it comes with 1 USB port for hard drives. Is it possible to connect a USB hub to the router so that I can connect more than 1 hard drive?
View 1 Replies View RelatedLinksys Wireless Router :: E3200 - Add New WAP In Home?
Sep 3, 2012I have been using an E3200 and it has been working great. I know have a need for wireless coverage in a distant part of my house and the current router won't get there. I also need wired in that spot of the house as well. I thought to buy a e1200 to use it as a WAP for that part of the house and also to have a few Ethernet ports come off it. Can I connect to my original E3200 wirelessly from the e1200 and then use the e1200 as a WAP and for Ethernet?
View 7 Replies View RelatedLinksys Wireless Router :: Different E3200 Upgrade To 1.0.04?
Nov 13, 2012I just upgraded my router from 1.0.03 to 1.0.04, I have a few questions:After installing the firmware, I pressed the reset button at the back for almost 1mn, the power lighted as expected, I then unplug the power cord for 30 sec.The strange thing is that this did not lead to a reset of the configuration, all my settings are still here...!But the actual problem is that my internet speed is divided by two, I still have to confirm this observation on the long term.
View 1 Replies View RelatedLinksys Wireless Router :: E3200 Needs Reboot Once A Day
Feb 18, 2012I have to reboort my router every day to get back an internet connection? I have a desktop and a laptop plus iPads, etc. The laptop loses connectivity every day about the same time. My only solution so far is to reboot the router. I realize that the client lease time is set to 1 day by default but isn't it supposed to ask the modem for another day of life when this happens?
View 5 Replies View RelatedLinksys Wireless Router :: E3200 Gets Wrong IP?
Jun 15, 2012I'm using a DSL line that changes IP's. I have the E3200 set to auto, but everytime the IP changes, my internet goes down, and I get an ip of 127.0.0.1 on the status page. I then have to renew the ip and reboot. This happens once a day, usually.
View 3 Replies View RelatedLinksys Wireless Router :: E3200 Or E4200 - Which One Is Better
Jul 6, 2011I have a 6 year old wrt54g that is working fine but old. I want to upgrade and will go with the 3200 or 4200. I really don't need the extra features on the 4200 since everything I have is hardwired (directly to two laptops and to two switches in other parts of the house for tv and printer). I want wireless for times when we move a laptop but it wouldn't be all the time, and we won't (for now) use the media options. The difference in price between the 3200 and 4200 is less than $25 so costs is NOT a factor in deciding.So should I just purchase the 4200 since price is not a factor or go with 3200; I want the most stable of the two and will never need the extra wireless features in the 4200.
View 8 Replies View RelatedLinksys Wireless Router :: No WAN DHCP Log On E3200?
Jan 11, 2012I used to have a Belkin router which was losing connectivity throughout the day for a few short moments. After looking at the logs it appears it was issueing a DHCP release randomy which explained the fault. Since it was old router I decided to replace it with a E3200. This worked fine for a few days but then I started to see similar symptions. So currently I am trying to figure out if it's the same issue as before. I tried looking for a log on the router to see if it was also losing/releasing the WAN IP, but apparently the router doesn't log it. I spoke to a tech rep on chat, but I don't think they understand what I was talking about (how frustrating). I even tried to explain it another way that if I hit the 'Release IP address' button and then hit the "Renew IP Adresss' button does this activity get logged.
Where can I find a log to see DHCP activity (on the WAN interface)? There is a DHCP log which shows all the LAN activity but this is not what I need for this issue. I find it hard to believe a mature vendor like Linksys doesn't log this activity?
Linksys Wireless Router :: 2 E3200 With The Same SSID?
Apr 19, 2012House has 2 floors. I want to install 2 E3200, one on each floor, but both with the same SSID/Password, etc. so internet connection/streaming throughout the floor is seamless.
Both floors have network wall sockets ready and they all lead to the same modem/router so all devices plugged lead to the same network.
PS. both E3200 have been update to Firmware Version: 1.0.03
Linksys Wireless Router :: E3200 No Connection To HD
Aug 28, 2012I have bought Linksys E3200 less than month ago.I have setup it, connected HD (WD My Book 1TB) through USB and it work good, without any problem.Than week ago, I turned off the router, because of my vacation. Yesterday, I came back, turned on the router. WiFi was working good, cable connection too. But there was no connection to HD. I had checked information about HD on admin page, router understood that it is HD, but not provided share access to folder, also, there was no button, to setup it.I disconnected HD, tried to connect it using the Cisco Connect, it provided mistake with USB connection to HD and than with HTTP connection to router. I disconnected HD, tried to connect it manually: connect HD -> go to admin page -> refresh to show HD -> admin page freeze... -> reboot of router manually.
There was a lot of tries to connect HD, but all was failed.I connect HD to computer, it works successfully.I checked connection to router through USB, using my card reader and SD flash card, it works successfully.Information about HW:
1. Linksys E3200, last update of firmware for German (was bought using German Amazon) country. (Cannot check it now, if needed will check)
2. Computer: Windows XP SP3
3. WD My Book 1TB (NTFS)
Linksys Wireless Router :: E3200 Storage With FW 1.0.04
Jul 29, 2012I updated my E3200 to 1.0.04 to try to resolve a wireless dropping issue. Now the connected USB storage no longer responds correctly (very delayed if connecting at all). When I try to provision new storage via the routers admin page, I do not get the permissions page.
View 9 Replies View RelatedLinksys Wireless Router :: USB Print With E3200
Jan 24, 2012I just picked up the E3200 and love it. This morning I hooked up my printer via the USB. Everything went smooth until I tried to print something. I thought nothing was happening, but I let it sit for a while. While I was waiting, I was messing around with my network setting in windows. I realized that my network had been set to 'work' for some reason, so I changed it to 'home'. As soon as I did, my printer spit out my test page. (probably 5 min after sending the doc.) I don't know if it was just coincidence or what, so I sent another page and nothing happened (yet).
Is this common to take that long? Is there a way to speed this up?
Linksys Wireless Router :: E3200 Intermittently Disconnecting
Sep 15, 2012I've just bought a linksys E3200 wireless router and it hasnt performed even alittle up to expectations.. As above stated, the router keeps disconnecting me from the internet and i do not know how to fix it. It gets really annoying especially when i have to use the internet to do work.
View 9 Replies View RelatedLinksys Wireless Router :: E3200 Runs On IE But Not Chrome?
Nov 17, 2011I recently purchased the E3200 Linksys router. Works great as long as I use IE to browse. Won't let me connect to the web with Chrome.
View 2 Replies View RelatedLinksys Wireless Router :: E3200 Less Powerful Than WRT54G?
Oct 29, 2011I just upgraded from a Linksys WRT54G to an E3200.I'm thrilled w/ the bells and whistles (e.g. 5 GHz for video to my Boxee and USB connection to my printer for wireless printing), but it seems that on the 2.4 GHz channel, the strength on the E3200 seems to be lower than it was on the WRT54g.I've placed the E3200 exactly where the WRT54G was, and I notice that on all my mobile devices, I either get no signal or a very week signal in my living room. W/ the WRT54G, the signal wasn't 100%, but it was definately better than what it is w/ the E3200.
I have the latest firmware and have adjusted the MTU down to 1400 (I'd left it at 1500 on the WRT54G and it always worked fine). I've also tried to adjust the 2.4 GHz channel to be Wireless-G only network mode and still no luck. I've tried these individually and in combination.
Is the E3200 just broadcasting a weaker signal at 2.4 the my older WRT54G? Should I return it and get another router or is there something I can do to boost the 2.4 signal? Or is there come other configuration I should try to play with?
Linksys Wireless Router :: Can't Stay Disconnected With E3200
Jul 27, 2012New E3200 router (a few weeks old).
Using the manual settings under Status/Router and clicking the Disconnect button (by Login Status), the page reloads, and say I am disconnected.
Without any input from me, about 30 seconds later the page reloads and say I am connected.
Clicking disconnect, closing the tab and testing my connection proves that I'm not actually being disconnected at all. I cannot force this router to manually disconnect.
Is this a firmware bug or is there another setting else where that prevents me from manually shutting down my connection?
Edit: Firmware 1.0.04 build 1 Apr 10, 2012
Linksys Wireless Router :: E3200 Setup Using USB Modem?
Apr 25, 2012How do I setup a E3200 router using a wireless USB modem to connect to the internet? This is my only choice, I do not have a wired connection and I do not own the telephone wires and there is no permission to do otherwise.
View 3 Replies View RelatedLinksys Wireless Router :: E3200 - Can USB Be Port Forwarded?
Feb 6, 2012I have a western digital USB 2tb drive. It works great on my intranet (my laptops and other devices can access it). I have a sticky Ip address and would like to be able to access my drive from my work, but I don't know how to set up or if it can be set up to work. Can the USB be port forwarded? I have the E3200 router, Windows 7 OS (if needed)
View 4 Replies View RelatedLinksys Wireless Router :: Connecting USB Printer To E3200?
Apr 1, 2012I managed to connect my USB printer (and tested ok) through the E3200 router using the Cisco Connect programme on Windows 7. I note that there was an option for a USB Printer connection in the set-up screen.
When I tried it on the Mac using Mac OSX 10.7.3 and Cisco Connect Ver 1.4, I noted that there was no option for a USB Printer connection.
Linksys Wireless Router :: How To Switch To New Cisco E3200
Apr 1, 2012Comcast installed a Netgear WNR 1000v2 and it is a piece of crap for WIFI. so I bought a Linksys E3200 to switched them. but I really don't know how to do it. How I can get my wifi and Roku working.
View 1 Replies View Related
