Linksys Wireless Router :: E3200 Runs On IE But Not Chrome?

Nov 17, 2011

I recently purchased the E3200 Linksys router.  Works great as long as I use IE to browse.  Won't let me connect to the web with Chrome.

View 2 Replies


Linksys Wireless Router :: E3000 Runs Very Hot Compared To Other?

Apr 25, 2010

My brand new E3000 runs very hot compared to other (e.g. Netgear WRT624 Super G) that I have had.  It get so hot that the hard surface it is on, and the underside of the unit itself, is almost too hot to hold.  Is this typical for the E3000 and also other E-series?  Won't this characteristic lead to early electronics failure? 

View 6 Replies View Related

Linksys Wireless Router :: WRT320N XBox Runs Fine As Long As Wired Isn't

Dec 1, 2011

There are 2 XBox's in the house and 1 is downstairs wired into the WRT320N Router.  The upstairs XBox is running wirelessly through the router.  Each of the XBox's work fine playing Modern Warfare 3, when only one is playing, but if both of us are playing, the wired connection works great, while the wireless connection is really slow and laggy.  Again, the wireless XBox runs fine as long as the wired XBox isn't also playing MW3.

View 9 Replies View Related

Linksys Wireless Router :: Set Up E3200 As WAP?

Aug 3, 2012

Trying to convert a spare router (Linksys E3200) into a wireless access point toextend my wireless coverage. I thought knew how to do this but having a problem.Steps I followed are:1. Disable the E3200 DHCP server2. Change E3200ip address from to something else3. Disable the firewall4.Make wireless settings5. Connect it lan port to lan port with primaryrouter.The problem I am having is that after I finish step 2 the routerreboots with the browser trying to access it at the new ip address. But thebrowser will not connect.I am doing this on a laptop that is disconnected from my network while I am working on the E3200. It is connected byan ethernet cable to an E3200 lan port. I also tried it wireless with the same result. Browser will not connect at any ip address except and then only after I factory reset the beast to regain the ip address

View 3 Replies View Related

Linksys Wireless Router :: E3200 Only Getting 130.0 Mbps?

Jun 21, 2011

after messing with it for a 2 days since I got it I cant seem to get more than 130.0 my last router had 300 same setup same distance  

View 9 Replies View Related

Linksys Wireless Router :: E3200 - Connect USB Hub?

Oct 18, 2011

I just ordered the E3200. It's suppose to ship today. I know it comes with 1 USB port for hard drives. Is it possible to connect a USB hub to the router so that I can connect more than 1 hard drive?

View 1 Replies View Related

Linksys Wireless Router :: E3200 - Add New WAP In Home?

Sep 3, 2012

I have been using an E3200 and it has been working great. I know have a need for wireless coverage in a distant part of my house and the current router won't get there. I also need wired in that spot of the house as well. I thought to buy a e1200 to use it as a WAP for that part of the house and also to have a few Ethernet ports come off it. Can I connect to my original E3200 wirelessly from the e1200 and then use the e1200 as a WAP and for Ethernet?

View 7 Replies View Related

Linksys Wireless Router :: Different E3200 Upgrade To 1.0.04?

Nov 13, 2012

I just upgraded my router from 1.0.03  to 1.0.04, I have a few questions:After installing the firmware, I pressed the reset button at the back for almost 1mn, the power lighted as expected, I then unplug the power cord for 30 sec.The strange thing is that this did not lead to a reset of the configuration, all my settings are still here...!But the actual problem is that my internet speed is divided by two, I still have to confirm this observation on the long term.

View 1 Replies View Related

Linksys Wireless Router :: E3200 Needs Reboot Once A Day

Feb 18, 2012

I have to reboort my router every day to get back an internet connection? I have a desktop and a laptop plus iPads, etc. The laptop loses connectivity every day about the same time. My only solution so far is to reboot the router. I realize that the client lease time is set to 1 day by default but isn't it supposed to ask the modem for another day of life when this happens?

View 5 Replies View Related

Linksys Wireless Router :: E3200 Gets Wrong IP?

Jun 15, 2012

I'm using a DSL line that changes IP's. I have the E3200 set to auto, but everytime the IP changes, my internet goes down, and I get an ip of on the status page. I then have to renew the ip and reboot. This happens once a day, usually.

View 3 Replies View Related

Linksys Wireless Router :: E3200 Or E4200 - Which One Is Better

Jul 6, 2011

I have a 6 year old wrt54g that is working fine but old. I want to upgrade and will go with the 3200 or 4200.  I really don't need the extra features on the 4200 since everything I have is hardwired (directly to two laptops and to two switches in other parts of the house for tv and printer).  I want wireless for times when we move a laptop but it wouldn't be all the time, and we won't (for now) use the media options. The difference in price between the 3200 and 4200 is less than $25 so costs is NOT a factor in deciding.So should I just purchase the 4200 since price is not a factor or go with 3200; I want the most stable of the two and will never need the extra wireless features in the 4200. 

View 8 Replies View Related

Linksys Wireless Router :: No WAN DHCP Log On E3200?

Jan 11, 2012

I used to have a Belkin router which was losing connectivity throughout the day for a few short moments.  After looking at the logs it appears it was issueing a DHCP release randomy which explained the fault.  Since it was old router I decided to replace it with a E3200.  This worked fine for a few days but then I started to see similar symptions. So currently I am trying to figure out if it's the same issue as before.  I tried looking for a log on the router to see if it was also losing/releasing the WAN IP, but apparently the router doesn't log it.  I spoke to a tech rep on chat, but I don't think they understand what I was talking about (how frustrating).  I even tried to explain it another way that if I hit the 'Release IP address' button and then hit the "Renew IP Adresss' button does this activity get logged.
Where can I find a log to see DHCP activity (on the WAN interface)?  There is a DHCP log which shows all the LAN activity but this is not what I need for this issue.   I find it hard to believe a mature vendor like Linksys doesn't log this activity?

View 3 Replies View Related

Linksys Wireless Router :: 2 E3200 With The Same SSID?

Apr 19, 2012

House has 2 floors. I want to install 2 E3200, one on each floor, but both with the same SSID/Password, etc. so internet connection/streaming throughout the floor is seamless.
Both floors have network wall sockets ready and they all lead to the same modem/router so all devices plugged lead to the same network.
PS. both E3200 have been update to Firmware Version: 1.0.03 

View 9 Replies View Related

Linksys Wireless Router :: E3200 No Connection To HD

Aug 28, 2012

I have bought Linksys E3200 less than month ago.I have setup it, connected HD (WD My Book 1TB) through USB and it work good, without any problem.Than week ago, I turned off the router, because of my vacation. Yesterday, I came back, turned on the router. WiFi was working good, cable connection too. But there was no connection to HD. I had checked information about HD on admin page, router understood that it is HD, but not provided share access to folder, also, there was no button, to setup it.I disconnected HD, tried to connect it using the Cisco Connect, it provided mistake with USB connection to HD and than with HTTP connection to router. I disconnected HD, tried to connect it manually: connect HD -> go to admin page -> refresh to show HD -> admin page freeze... -> reboot of router manually.
There was a lot of tries to connect HD, but all was failed.I connect HD to computer, it works successfully.I checked connection to router through USB, using my card reader and SD flash card, it works successfully.Information about HW:

1. Linksys E3200, last update of firmware for German (was bought using German Amazon) country. (Cannot check it now, if needed will check)
2. Computer: Windows XP SP3
3. WD My Book 1TB (NTFS)

View 4 Replies View Related

Linksys Wireless Router :: E3200 Storage With FW 1.0.04

Jul 29, 2012

I updated my E3200 to 1.0.04 to try to resolve a wireless dropping issue.  Now the connected USB storage no longer responds correctly (very delayed if connecting at all).  When I try to provision new storage via the routers admin page, I do not get the permissions page. 

View 9 Replies View Related

Linksys Wireless Router :: USB Print With E3200

Jan 24, 2012

I just picked up the E3200 and love it.  This morning I hooked up my printer via the USB.  Everything went smooth until I tried to print something.  I thought nothing was happening, but I let it sit for a while.  While I was waiting, I was messing around with my network setting in windows.  I realized that my network had been set to 'work' for some reason, so I changed it to 'home'.  As soon as I did, my printer spit out my test page.  (probably 5 min after sending the doc.)  I don't know if it was just coincidence or what, so I sent another page and nothing happened (yet).
Is this common to take that long? Is there a way to speed this up?

View 3 Replies View Related

Linksys Wireless Router :: E3200 Intermittently Disconnecting

Sep 15, 2012

I've just bought a linksys E3200 wireless router and it hasnt performed even alittle up to expectations.. As above stated, the router keeps disconnecting me from the internet and i do not know how to fix it. It gets really annoying especially when i have to use the internet to do work.

View 9 Replies View Related

Linksys Wireless Router :: E3200 Less Powerful Than WRT54G?

Oct 29, 2011

I just upgraded from a Linksys WRT54G to an E3200.I'm thrilled w/ the bells and whistles (e.g. 5 GHz for video to my Boxee and USB connection to my printer for wireless printing), but it seems that on the 2.4 GHz channel, the strength on the E3200 seems to be lower than it was on the WRT54g.I've placed the E3200 exactly where the WRT54G was, and I notice that on all my mobile devices, I either get no signal or a very week signal in my living room.  W/ the WRT54G, the signal wasn't 100%, but it was definately better than what it is w/ the E3200.
I have the latest firmware and have adjusted the MTU down to 1400 (I'd left it at 1500 on the WRT54G and it always worked fine).  I've also tried to adjust the 2.4 GHz channel to be Wireless-G only network mode and still no luck.  I've tried these individually and in combination.
Is the E3200 just broadcasting a weaker signal at 2.4 the my older WRT54G?  Should I return it and get another router or is there something I can do to boost the 2.4 signal?  Or is there come other configuration I should try to play with?

View 3 Replies View Related

Linksys Wireless Router :: Can't Stay Disconnected With E3200

Jul 27, 2012

New E3200 router (a few weeks old).
Using the manual settings under Status/Router and clicking the Disconnect button (by Login Status), the page reloads, and say I am disconnected.
Without any input from me, about 30 seconds later the page reloads and say I am connected.
Clicking disconnect, closing the tab and testing my connection proves that I'm not actually being disconnected at all. I cannot force this router to manually disconnect.
Is this a firmware bug or is there another setting else where that prevents me from manually shutting down my connection?
Edit: Firmware 1.0.04 build 1 Apr 10, 2012

View 9 Replies View Related

Linksys Wireless Router :: E3200 Setup Using USB Modem?

Apr 25, 2012

How do I setup a E3200 router using a wireless USB modem to connect to the internet? This is my only choice, I do not have a wired connection and I do not own the telephone wires and there is no permission to do otherwise.

View 3 Replies View Related

Linksys Wireless Router :: E3200 - Can USB Be Port Forwarded?

Feb 6, 2012

I have a western digital USB 2tb drive. It works great on my intranet (my laptops and other devices can access it). I have a sticky Ip address and would like to be able to access my drive from my work, but I don't know how to set up or if it can be set up to work. Can the USB be port forwarded? I have the E3200 router, Windows 7 OS (if needed)

View 4 Replies View Related

Linksys Wireless Router :: Connecting USB Printer To E3200?

Apr 1, 2012

I managed to connect my USB printer (and tested ok) through the E3200 router using the Cisco Connect programme on Windows 7.  I note that there was an option for a USB Printer connection in the set-up screen.  
When I tried it on the Mac using Mac OSX 10.7.3 and Cisco Connect Ver 1.4, I noted that there was no option for a USB Printer connection.

View 3 Replies View Related

Linksys Wireless Router :: How To Switch To New Cisco E3200

Apr 1, 2012

Comcast installed a Netgear WNR 1000v2 and it is a piece of crap for WIFI. so I bought a Linksys E3200 to switched them. but I really don't know how to do it. How I can get my wifi and Roku working.

View 1 Replies View Related

Linksys Wireless Router :: Guest Access On E3200?

Nov 14, 2011

Purchased E3200 and did simple setup via CD setup (Cisco connect).  Set up main name and password. Cisco Connect assigned "-guest" to end of main name for the guest account.  Gave guest account its own password.  Both main and guest accounts were broadcasting OK -- but guest account was not secure and could be accessed without password.  (All software and firmware upgrades were done during initial setup).Reset the E3200 and restarted things from the CD setup.  Created main account, main account password, and guest password again.  In advanced settings, left basic wireless settings at initial settings, changed wireless secutiy to WPA2 Personal.  Still having the guest account being broadcast in unlocked status. (Have turned off guest access for now until I can get password protection for it).

View 2 Replies View Related

Linksys Wireless Router :: E3200 Cannot Connect To Internet?

Dec 18, 2011

The problem I have was that last night I unplugged my router and replugged it back in. As soon as that happened, there was no connection between my router and the modem. This morning, I tested to see if it was the modem by connecting an ethernet cable from my desktop to it, and was able to get online. Then, II reset the router and a sucessful connection was made between the two. On my desktop my old network was gone, but the Cisco network was there, leading me to create a new network as if it was a new router. After setting up a new network, I am not able to connect to the internet.

View 1 Replies View Related

Linksys Wireless Router :: Second SSID Not Broadcasting On E3200

Apr 18, 2012

SSID is not being broadcast from an e3200.  I split the wireless networks and assigned a new name for the 5Ghz band.  The broadcast SSID button is enabled for both networks. (2.4 & 5). The idea is I want to stream video on the 5Ghz band.  Nothing seems to see it though, TV other PCs, etc.

View 1 Replies View Related

Linksys Wireless Router :: E3200 Can't Connect Wired?

Aug 31, 2012

I have an E3200 router. I had been experiencing connection problems with my desktop that was wired to the router, and in an attempt to resolve the issue reset the router to its factory defaults. Now, as before the reset, I can connect to my router just fine via Wi-Fi (I have several devices connected this way) but none of the computers that I attempt to connect via ethernet are able to establish a connection. I have tested multiple cables with multiple computers using multiple ports on the router, to no avail. When I view the Status --> Ports page on the router, I can see the ports in use that I am connected to, but that is the only sign of connection that I get.

View 1 Replies View Related

Linksys Wireless Router :: E3200 - Cannot Connect To Internet

May 14, 2011

I have purchased a new E3200 to replace my old Linksys router.  It locates my computers and sets up a network, but cannot connect to the internet via my Comcast cable modem.  I have read on this forum about Mac address issues, but it has located the Mac address.  The internet IP address is all zeros, and releasing and renewing the IP does nothing

View 9 Replies View Related

Linksys Wireless Router :: E3200 - How To Know If Connected Through N Network

Sep 29, 2011

I have an N wireless adapter for my xbox 360. I want to make sure I am connected through N network, getting 5gbps.

View 6 Replies View Related

Linksys Wireless Router :: E3200 Will Not Connect To The Internet

Jun 17, 2012

I have a Telus Wireless modem and got a linksys router to try and expand the range & strength of the wifi. However,whenever I plug in the router and try to set it up, I can get connected to the router but no internet connection.I have tried everything I can - restarted the modem and the router several times, connected and reconnected, rebooted the whole of the router system, connected with an ethernet cable straight to the router from my laptop. In the settings, I have tried to mess around with the settings and more, and whenever I screw up I reset the router to defaults again. 

View 3 Replies View Related

Linksys Wireless Router :: Set Up Iphone 4 To Print Using E3200?

Aug 30, 2012

How can I set up iphone 4 to print using a router model E 3200,to the printer model canon MP520 via USB.

View 2 Replies View Related

Linksys Wireless Router :: E3200 Doesn't Always See USB Drive?

Sep 8, 2012

i have a 2tb seagate expansion formatted ntfs.  i am primarily a linux (ubuntu) user, but when the drive drops off, it cannot be seen in any os and it doesn't show up on the router setup page.

View 6 Replies View Related

Linksys Wireless Router :: No Power Button On E3200?

Oct 3, 2012

I just got my new router today but i don't see a power button on the back of this unit.  Am i blind?  Of course the unit comes on when i plug in the adapter but i don't see a on off switch.

View 7 Replies View Related

Copyrights 2005-15, All rights reserved