Linksys Wireless Router :: WRT320N XBox Runs Fine As Long As Wired Isn't
Dec 1, 2011
There are 2 XBox's in the house and 1 is downstairs wired into the WRT320N Router. The upstairs XBox is running wirelessly through the router. Each of the XBox's work fine playing Modern Warfare 3, when only one is playing, but if both of us are playing, the wired connection works great, while the wireless connection is really slow and laggy. Again, the wireless XBox runs fine as long as the wired XBox isn't also playing MW3.
View 9 Replies
ADVERTISEMENT
Sep 23, 2012
I purchased and set-up the EA4500 on Thursday. Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues. Connected directly to modem I get normal ping times on whichever computer is connected. When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms. They are all over the place 30ms (I can live with that), up to the 900's. I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference. I did end up doing a hard reset on the router last night after I lost tech support. We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
It was so slow on my work computer, a pint to yahoo timed out. The computers connecting to router are
XP SP3 (mine)
Win 7 Home (IPV6 turned off)
Work laptop that uses VPN and VOIP
View 5 Replies
View Related
Jul 22, 2011
So whenever i plug in my computers with an ethernet cord to my router i get an older, different ssid name displayed in local area connections instead of the one being displayed on the wireless network. For one computer it displays the old ssid name 3011, with a 2 right next to it (i think thats because i had another router with the same name), i changed the ssid twice, but when i plug it into the computer it still displays 3011 2. The other computer displays the first newer ssid but not the official one listed on the wireless network. Either way neither of my computers display the name i have as the ssid when plugged into the router with a cord. do i need to do something else so the names match? i reset the router and updated the firmware before writing this, it didnt do anything. i have windows 7 business for both machines.
View 4 Replies
View Related
Sep 11, 2012
I have a WRT120 wireless router that works fine, but the wired connection has failed. I have restarted the modem, router and the computer and still doesn't recognize the wired connection.
View 9 Replies
View Related
Jun 22, 2011
My newly installed E1200 only sends speeds of about 16 mbps wireless, but sends the ful 60 mpbs when wired. What is going on. Firmware is up to date. Changing the channels didn't do anything. Is there a way to figure out if the problem is with my laptops wireless card.
View 9 Replies
View Related
May 20, 2012
I have an HP-MINI with an atom processor 1.6ghz and dual core according to device manager. It has 1 gb ram and no other issues. I can boot into Ubuntu and have everything work fine. It goes on line with no prodding on WAP after I enter the password as usual.
When I attempt to do this in winXP on the same exact computer, it comes up with the no connectivity issue. I have run ipconfig and here is the result: (btw I am sending this info from another computer)
Windows IP Configuration
Host Name . . . . . . . . . . . . : KEN_HP_MINI
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
[code]...
After I ran this see that Netbios over TcpIp was disabled. I am sure it is supposed to run in some kind of automatic mode or something as I recall.
View 8 Replies
View Related
Apr 13, 2013
I have a DSL modem, model AG10W. I can't seem to figure out how to forward ports to xbox. No one seems to have this router/modem. I got it from a company here in town. I don't know much about this type of stuff.
View 1 Replies
View Related
May 8, 2011
I have been having some issues connecting my PC to my XBox360 using the wired approach, it seems to be massively temperamental to a point i decided to not connect the XBox via my router and instead put it straight into my spare network port on my PC. The basic jist of mynetwork confirguration is something like this: Internet cable > Virgin Media 256 Modem > Linksys BEFSR41 Router > PC. I had no issues with this setup, but as soon as i wanted to add my XBox into the mix, things got tricky. I plugged the network cable from my Xbox originally into one of the ports on my router and then went through the settings on both my Xbox and router. Again, i had absolutely no confidence in doing this myself since i don't mess with it, but after reading guides i finally got it sorted. Well, partly sorted. I was able to connect to my Xbox Live, however i was unable to connect to my Xbox to my PC (To stream files onto the Xbox). This was what i wanted to do, i didn't really want to use the Live anyway. So i went off to work again. In the end nothing was working, so i opted to connect my Xbox directly into my PC - So it was no longer connected through my router. I could SEE my PC on my Xbox, but i was unable to connect to it to stream anything. I then opted to disconnect my router (For no other reason than to rule it out) - Sure enough, the very second i disconnected the router, i was able to instantly connect to my PC and was streaming straight away. Once i was streaming, i was able to reconnect my router and that was that. But if i turned off my Xbox i would need to also turn off my router the next time i wanted to stream. How can i fix this so i don't have to continually turn off my router, is there a setting somewhere in the options on my router which can allow me to connect to my Xbox? Windows 7 Xbox 360 Linksys BEFSR41 - 2.00.02 Firmware
View 1 Replies
View Related
Nov 17, 2011
I recently purchased the E3200 Linksys router. Works great as long as I use IE to browse. Won't let me connect to the web with Chrome.
View 2 Replies
View Related
Apr 25, 2010
My brand new E3000 runs very hot compared to other (e.g. Netgear WRT624 Super G) that I have had. It get so hot that the hard surface it is on, and the underside of the unit itself, is almost too hot to hold. Is this typical for the E3000 and also other E-series? Won't this characteristic lead to early electronics failure?
View 6 Replies
View Related
Dec 27, 2012
I have an E4200 router with 3 WET610N access points. I did the firmware update on the router, E4200, about 2 weeks ago so my son could use his xbox when he got home after 4 months of being away. Everything seemed to work OK as far as I could tell....but when he went to sign into xbox live and watch Netflix, it will load to 98% and stop. A friend of his came over with the new Slim xbox 360 with built in wireless and it will connect fine on its own, if we hook up one of the 610N's to it, it will load to 98% on Netflix and stop again with error code R8152. Both of my older xbox's will hook up and play on xbox live, just not work with Netflix.I also noticed, it shows the WET610N as a hard wire on xbox and will not search for any wireless networks, I have 2. The newer Slim xbox360 will search out both networks on its own if you allow it to use its internal wireless. This only happened since the firmware update.
View 3 Replies
View Related
Dec 12, 2012
I'm having trouble connecting my 360 to the wireless router to gain Internet access.I use my phone's Wi-Fi to gain internet access with NO issues. My current setup: NetGear Wireless router is connected to my D-Link wired router, and I can access the internet no problem. (10 MBPS down, 5MBPS up)When I try to connect the 360 to the Netgear Wireless router, it connects to the Network, but Internet test it reads "DNS error - The router or modem may mot be automatically providing DNS settings. Try a manual DNS setting instead."(Next suggestion) "DNS Error - If you have a PC that can successfully browse the web, check it's network properties to find the DNS address it uses..."Now, I have XBMC running on my computer, and the 360 can access the network so it shows up under Video Apps so I can see a file list to stream movies. When I try to run a movie, it says I must download an update - so I can't watch the movies at all.I juso set it up so I can access the Network AND Internet.Again, Netgear wireless router (which 360 connects to) connected to D-Link wired router.
View 10 Replies
View Related
Mar 9, 2011
I'm sure it's on here but because I dont understand the name of what I'm looking for, I'm having trouble searching. My main network is setup for wireless via a netgear wndr3700. I'd like to use my old linksys wrt54g v5 to connect to that network wirelessly and allow me to connect my xbox via wired ethernet. Basically instead of buying a wireless adapter for the xbox, i'd like to know if/ how i can use my linksys router instead.
View 13 Replies
View Related
Jul 19, 2011
Recently, my PC has been losing connection to the internet at 1am.It doesnt tell me its lost connection and when i repair the connection it says that it has been repaired - but nothing will connect to the internet and the Zone Alarm symbol stays static instead of its usual green/red activity bars to let me know data is moving in and out.
My xbox is fine all of the time and the other computers in the house are also fine when i checked them at night.- I also checked the ethernet cable from my pc to my xbox to see if that could be the issue - but the xbox worked fine with it.
[code]....
View 7 Replies
View Related
Jun 11, 2012
My computer not working probably with a wired connection.I can ping to the problem sites with absolutely no issues.
View 3 Replies
View Related
Jun 19, 2012
I have changed the channels, changed the firmware, changed the position of the wireless router, reinserted my wireless card on my rig, changed the security, turned everything setting on or off.
View 2 Replies
View Related
Apr 5, 2012
I built my first computer yesterday and everything went amazing. Unfortunately, I am having trouble simply connecting to the internet via wired, ethernet, cables. I can connect wirelessly but I need to connect wired as well. My IP when I am only using a wire starts as 169..I know this typically means there is a problem with my router, however, due to the fact that my laptop can use the wire router perfectly fine but my computer doesn't I am at a loss. I have downloaded the ethernet drivers but I don't know what to do.
View 2 Replies
View Related
Feb 22, 2012
I am trying to set up WRT on my WRT320N access point so I can connect it to my other access point that also doubles as my DSL router.Where can I find the WDS on the WRT320N?
View 1 Replies
View Related
Apr 25, 2013
I have a WRT320N, firmware version 1.0.05., Windows 7 Home Premium SP1, and a Hewlett Packard laptop.I would like to utilize both bands on my router at the same time for internet access, so that I can have the one my kids use shut down at a certain time but mine stay up.If not, what's the closest I can get, even if I have to purchase additional items to do so? Do I have to manually turn their band off when I want it off? And can I even have both bands in use at the same time?
I looked at my Cisco online info by access the IP address. I see the Access Restrictions tab. Can I even set usage by specific computer? If so how do I do that?
View 3 Replies
View Related
Jul 20, 2009
After playing around I cannot get the router to get into the wide 40 MHz mode any more (2.4 GHz)
View 5 Replies
View Related
Dec 6, 2011
I've purchased this router a few weeks ago, but I can't use it as I can't get on the internet with it plus my laptop which as wifi will not recognize it.
I would really like get it going, I've tried live chat but I guess the techy didn't have the patience, I am a slow typer for lack of a better word.
View 1 Replies
View Related
Feb 19, 2013
Nothing seems to be able to connect to my wireless network. It seems to have occurred after I installed a new copy of windows 7 onto my sister's desktop. A message appeared saying we have the same ip address. I've tried renewing our ip address on both desktop but it won't give us new ip address for some reason.
View 14 Replies
View Related
Jul 27, 2012
Just installed linksys wrt320n. Desktop and one laptop (wireless) connect. Both windows 7. A second laptop (Vista) errors out with message "the selected data rate is not correct". This laptop sees the router (since I see the router name and it validates the passphrase) but I cannot ping the router. I saw two messages on this site suggesting to enable WMM and use security WPA2. I have verified that both of these are so set.
View 9 Replies
View Related
Feb 2, 2011
I'm currently using my WRT320N router as an access point (connected to another linksys router), but I've lost my username and password to access the web-based utility. So I need to press the reset button and set it up again. Currently everything is working fine, but I've forgotten how to configure the router for this purpose, and I can't find instructions in the user's guide online. I seem to remember it being troublesome. I know I have to assign a different IP address (currently I'm using 192.168.1.113.) What other settings (if any) need to be changed?
View 2 Replies
View Related
Aug 16, 2011
I want to setup the following:
Internet through DSL-Thompson TG 789 VN router ---> several yards --> Linksys WRT320N --> wired computer netwerk | |with printer
| |
---> Wireless Netwerk --> laptops / phones <--- (WAN depending on strongest signal)
|
---> several servers
The Thompson does the DHCP and routing. It is the gateway through the internet, IP 192.168.2.254 (mask 255.255.255.0).I can't replace the thompson since it is delivered by my provider. SSID = BertB I want to achieve that all the compuers / laptops / phone and printer are in one network and can communicate with each other So the only possibility, as far as I can see, is to set up the Linksys as a bridge.
I have to do the following at the Linksys but have some questions as mentioned below:
SSID = BertB (the same)
channel = different from the channel used by Thompson
DHCP = off
IP = fixed (192.168.2.253)
gateway = 192.168.2.254
[code]....
how the thompson and the Linksys will build a connection with each other, or will this happen automatically through the above setup?Do I have to put the mac address of the thompson in the Linksys and/or vice versa?
View 1 Replies
View Related
Oct 8, 2009
How do I disable the wireless?
View 9 Replies
View Related
Dec 14, 2009
I just bought a Linksys 320N router to replace another competitors router. I am trying to connect to my VPN server from outside my network. I have the external ip to my network. I setup the new 320N router just like the old router. set dmz ip to internal ip of vpn server, set port forwarding to 1723, both, internal ip of vpn server, I have a way to test the vpn while i am inside my network. So, I can watch the VPN server log and see the request come into the server and it times out with the Linksys 320 N hooked up. If I have the old router hooked up, the vpn establishes a connection.
View 9 Replies
View Related
Jul 24, 2011
I have a WRT320N router with firmware version 1.0.01 build 008. I just got an iPad and while it can find my router, I can't access the WiFi when I enter my password. I can use the router with my laptop so I know the connection and password are ok.I've seen two administrators on here suggest the same thing. And one person responded that it worked. The identical directions were:
Try changing some advanced wireless settings on the router.Connect the computer to the router with the Ethernet cable. Open the setup page of the router.Click on wireless tab and set the configuration view to manual. Change the wireless channel to 11. Save the settings.Go to wireless tab and click on Advanced wireless settings.Change Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.Try to connect to the wireless network again and see if that works.
1 - I think my computer already is connected to the router with the Ethernet cable - I mean there is an Ethernet cable attached to both my computer and my router - in slot 1 on the router
2 - the only thing I know how to access is the Linksys EasyLink Advisor. What and where is the setup page of the router?
View 4 Replies
View Related
Dec 20, 2011
I am running a WRT320N with Firmware 1.0.04Trying to Upgrade the Firmware to 1.0.05 it always fails at about 24% progress with a message saying an invalid value has been entered.I downloaded the firmware from your homepage twice so that the file is not corrupted
View 4 Replies
View Related
Feb 17, 2010
I have some major problem with my WRT320 router. For some reasonit won't let me connect to Age of Empires 2 (other, newer games work fine) via Hamachi. When i want to connect i can see the game but when i want to join it tries to connect but fails telling me i'm unable to join... I know the problem is in the router because when I connect my modem directly to my computer Age of Empires connects fine!
View 8 Replies
View Related
Oct 19, 2011
We have WRT320N (Model No.) and when I moved i notice that my wirelss network does not have internet connection. Even after I hook everything up it doesn't work, my computer does not recognize the network but the laptop does. I have prior knowledge about computers and the internet but I don't know why I am having a problem. Is it because I moved and the data in my previous home does not match the data here?
View 3 Replies
View Related
Aug 22, 2011
I'm using my WRT320N as a home router, I need more ipadresses to be delivered to my computers, yet I can't get my router to give med wider netmask range. In the list I get 255.255.255.0 - 255.255.255.240 or something like that. I need 255.0.0.0 on my network and that would be perfect if i could get that...
View 5 Replies
View Related
Aug 7, 2011
I've got the below setup, have the wrt320 setup as a switch / wifi ap, i'm totally unable to access its management page from pc1 but am able to via pc 3, why is this, how can i get around this? Routing? Also am unable to access pc3's resources from pc1..When i enter the ip of the wrt320 it thinks about it and before it has come up with the user/password screen but it soon dissapears and firefox comes up with a "Unable to connect Firefox can't establish a connection to the server at 192.168.0.2." message.
View 1 Replies
View Related
