Linksys Cable / Dsl :: Cable Modem Dpc3825 - Hook Up To Smart Apps Wifi?

Apr 23, 2013

With this modem, can you hook up to the Linksys Smart Apps WiFi?

View 2 Replies


Linksys Cable / DSL :: Cisco Modem DPC3825 Won't Recognize It

Mar 27, 2012

I recently upgraded, through my ISP, my high-speed modem to the DPC3825 model modem/router. But when I try to connect to the DLink switch, the modem freezes, and doesn't recognize it.  My previous setup was modem, to my DLink router (DIR 615), to my switch. With my new setup, I just bypassed the DLink router, because my new modem includes router capability.Is there some compatibility issue between the new modem and the DLink switch?

View 1 Replies View Related

Linksys Cable / DSL :: DPC3825 Modem Remote Management Port Setting?

May 24, 2011

I am looking to permanently reset the default remote management port of the MODEM DPC3825 to something other than 8080. how to PERMANENTLY change the port from 8080? In the web interface under administration I have several times set it to something else other than the defaulted 8080 but when the modem is rebooted or reset, it goes back to the default 8080.

View 4 Replies View Related

Linksys Wireless Router :: DPC3825 Cable Modem Gateway - Can't Access Admin Part

Sep 20, 2012

i have a dpc3825 cable mdem gateway i spent 4 hours on the phone with charter yesterday i cant access the admin part of the router i go to and up comes the setup username and password i have reset it numerous times i have left it blank as per instructions i have tried admin and blank cusadmin and password i cant get in

View 1 Replies View Related

Linksys Cable / DSL :: Atlanta 2100 - When Installing Driver To Use Usb Cable Modem Does Not Recognize It

Dec 13, 2012

I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.

View 3 Replies View Related

Linksys Cable / Dsl :: X1000 Modem Does Not Allow Connection To Wifi?

Mar 13, 2013

I recently bought an x1000 modem/router and found that after 2/3 days of staing active and properly functioning, it does not allow me to login to wifi connection with none of my devices (tried iPhone, iPad and 2 windows pc).Firmware version is v1.0.00 build 018 Sep 04, 2012

View 4 Replies View Related

Linksys Cable / DSL :: BEFCMU10 Need To Install And Get Cable Modem Working

Mar 24, 2011

I inherited a BEFCMU10 v.3 cable modem from my boss who switched to FiOS and I would like to use this with my Comcast connection.All I received from him is the cable modem and power adapter, what do I need to install and get this cable modem working? My router is WRT-54G.

View 2 Replies View Related

Linksys Cable / DSL :: Can't Get A New IP From ISP When Cable Modem EPC3925 Is Set To Router Mode

Mar 23, 2012

I can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?

View 1 Replies View Related

Linksys Cable / Dsl :: Connect Wag160nv2 With Another Modem / Router Wifi?

May 14, 2011

Connect WAG160Nv2 with another modem / router Wi-Fi? 

View 2 Replies View Related

Linksys Cable / DSL :: WAG320N And Cable Modem Connection?

Jun 4, 2010

some reference material about configuring my WAG320N to use my cable modem via Ethernet port 1. I've seen it mentioned that's its possible, however I've been unable to sort it out myself.
And before you ask, I've brought the DSL router as I'm moving in the next 12 months and my new base will not have access to cable internet and I'll be reverting back to DSL.

View 8 Replies View Related

How To Hook Up A Router To A Desktop Modem For Kindle Fire Wifi

Nov 15, 2011

My mom wants to buy my dad a Kindle Fire for Christmas. Currently they have a desktop computer with a modem plugged into it and use Verizon dsl for their internet. The Kindle needs wi-fi and I don't want to disrupt the way their computer is set up now.Do I simply plug the router into the modem to get the wi-fi signal?

View 9 Replies View Related

Linksys Cable / DSL :: WAG320n Use As Modem Only?

Jul 17, 2011

I have a WAG320n and I wish to use it as a modem only so that I can use an Airport Extreme as my wireless router. how to configure the WAG320n so that it can be used in this configuration?

View 1 Replies View Related

Linksys Cable / DSL :: E1550 Cannot Connect Via Dsl Modem

Oct 2, 2011

Have an existing befsr41 / westell b90-210015 connection that has been working for years... replaced the befsr41 with a e1550 and cannot connect to the internet. Tried to connect to the modem directly to see how to put into 'bridge mode' but cannot find the right ip address.

View 1 Replies View Related

Linksys Cable / DSL :: How To Configure WAG120N As A Modem

Apr 18, 2013

I have WAG120N and is working fine, but has very poor wifi range. I recently purchased EA 6500. how to setup my WAG120N as a modem only and shift all routing to the EA6500

View 2 Replies View Related

Linksys Cable / DSL :: Befcmu10 V4 - Can't Login To Modem

Jul 7, 2008

I have Linksys Befcmu10 v4. I need to port forward and I cannot login. I have tried admin/password and all those combinations. I tried factory restore by pressing the thing in the back and still can't access the page

View 6 Replies View Related

Linksys Cable / DSL :: Hookup ATT DSL Modem With E1200?

Apr 22, 2013

I presently have ATT DSL Motorola modem (Model 2210-02-1022) with (1) DSL Green plug, and (2) Ethernet-Yellow in the back of my modem.I have reset the E1200 Router, and tried multiple ways of getting the Wi-Fi to work.  This Linksys E1200 belonged to my neighbor, but he recently passed away, and left me all his computer devices.In the Wall phone jack, I have a DSL noise filter as part as a two female plug,

1) for the Green DSL on Modem, and the other

2) to my phone handset. The way I usually plug this in BEFORE this router was this: The green DSL plug from Modem - into phone jack DSL Filter, and the Yellow ETHERNET cord from Router to the back of Computer. I powered on computer, plugged in all cords, except for E1200 power cord, disabled antivirus/security software,  I then inserted the Cisco Connect CD and waited , and waited, but it said I was not connected to the Internet.  ERROR CODE# 82BD0304. I'm using win7 64 Pro.  before i called ATT, I wanted to know if there is an easier way to conect the right cords to the right plugs.

View 1 Replies View Related

Linksys Cable / DSL :: Can't Seem To Setup WAG120N Modem

Nov 27, 2011

I can't seem to setup my WAG120N modem.I kept on getting the error "your ethernet cable does not appear to be connected properly" even though I have connected all the cables correctly. I can access the modem through the browser via though.I thought the setup is supposed to be simple but I have wasted few hours.

View 1 Replies View Related

Linksys Cable / DSL :: WCG200G Wireless Resets The Modem?

Apr 27, 2012

WCG200G ver.2  resets everytime i use wireless
Firmware Version:

View 8 Replies View Related

Linksys Cable / DSL :: How To Configure WAG120N Modem / Router

Jun 25, 2012

I just ordered the Linksys WAG120N modem/ router and need configuring the same on the BSNL network. Any Document or link about his Installation and configuration.

View 3 Replies View Related

Linksys Cable / DSL :: X1000 Modem Router Crashes?

Apr 15, 2013

I have just bought an X1000 box, it seems to be randomly locking up and the only way around the issue is to reboot.  I have also noticed it can't seem to handle streaming video either.
My ADSL has been checked and all is OK and if I don't stream video generally things seem OK for a couple of days.  If I run a continual ping to the unit you can see that now and again the request times out but then some times comes back and other times I need to reboot again.  The log file seems to show very little either.

View 1 Replies View Related

Linksys Cable / DSL :: X3000 Used As A Router Behind A VDSL Modem

Nov 10, 2012

I desperately try to set up the X3000 as a router behind a vDSL modem. When I choose connection through Ethernet and then PPPoE, it never keep the credentials after reboot in spite of having saved the data before.

View 6 Replies View Related

Linksys Cable / DSL :: Updating X3000 Modem Router

Jul 8, 2012

I recently purchased two x3000 devices.Both shipped with the 1.0.01 firmware installed.Upgraded one device in one location to the release without issue.A day later i'm not trying from a second location to perform the same action.I've downloaded the FW_X3000_1.0.03.001.bin firmware from the Cisco downloads for the device and receive a pop up 'The image file is incorrect'.I've downloaded hte image twice and it appears to be correct in size. I'm following the same process that worked without issue the day previously.

View 3 Replies View Related

Linksys Cable / DSL :: Working With WAG320N Only As Modem ADSL?

May 7, 2012

i have Linksys WAG320N and Draytek Vigor 2850. My main router is Vigor, wchich support 2 WANs. First WAN is my VDSL connection (plug direct into Vigor) and second WAN i want ADSL connection. Can I work with WAG320N only as ADSL modem?

View 1 Replies View Related

Linksys Cable / DSL :: WAG200G - Slow Down A Modem Router?

Mar 23, 2011

Is there a way through settings (I have a Linksys WAG200G modem/router) to slow the internet speed (much like shaping)?

View 2 Replies View Related

Linksys Cable / DSL :: See DSL Path Mode On WAG54G2 Modem

Nov 7, 2011

How can I see "DSL Path Mode" on my WAG54G2 modem, How do i know,the line FAST PATH or INTERLEAVE ?

View 1 Replies View Related

Linksys Cable / DSL :: WAG35G To Act As Modem Passing Through A Static IP?

Feb 27, 2011

I currently have a WAG354G configured with a static IP address acting as a DHCP server. Wireless is off, and instead I have an Apple Airport Extreme basestation in bridge mode to which my client machines connect wirelessly.
Instead I want to pass through the static IP address to the Apple basestation, and use this as my DHCP server.
Ultimately I want the Apple basestation to pass the static IP address through to my home server, and also supply DHCP addresses to other clients.

View 5 Replies View Related

Linksys Cable / DSL :: WCG200 Bridge Mode From Wireless-G Cable Gateway To Wired?

Mar 14, 2013

Our family has about three computers that use a wireless network that we all share. We have an old Gateway, a WCG200, that is bridged to an E2000, which was set-up ever since we required better security when someone used our connection to illegally obtain movies. We got a letter which warned us of any future violations that could cause legal action, so we looked into our wireless connection to better secure it from any other individuals outside of our household. The WCG200 is connected to the outlet in the wall via cable, and then connects from the Ethernet to the E2000. The E2000 has a stronger security setup than the WCG200, which is the advice we received from our ISP and would allow us to keep the Gateway. It provides a strong signal, but from time to time, we suffer latency or slow loading through all of our online devices, even though our connection speed displays a solid 72.0 Mbps. I've tried the Event Viewer to see any problems, and I have noticed some small things:

- WLAN AutoConfig service has successfully stopped.Wirel?

- WLAN Extensibility Module has stopped. Module Path: C:WindowsSystem32cmihvsrv64.dll

- The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.

- Broadcom NetLink (TM) Gigabit Ethernet: The network link is down.  Check to make sure the network cable is properly connected. [This last one is strange, since I use the Wireless Network Connection with a DW1501 Wireless-N WLAN Half-Mini Card, while the Broadcom adapter is under the Local Area Connection and displayed as not connected.]

Other than that, I'm not quite sure what the recurring problem comes from. Our WCG200 has a firewall enabled and our E2000 has an SPI firewall enabled. The security mode of the E2000 is a WPA2 setup. We have disabled the wireless network of our WCG200 in order to make use of the E2000.

View 9 Replies View Related

Linksys Cable / DSL :: WAG160N Blinking With No Ethernet Cable Attached To Router

Feb 24, 2012

I have a  WAG160N  wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset  ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.

What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ? 

View 1 Replies View Related

How To Hook Up Linksys DSL Router To Att Modem

Sep 2, 2011

I have an older model linksys router and a motorola att modem. I can't get an internet connection

View 2 Replies View Related

How To Connect Ubee Wireless Cable Modem To A Linksys Router

Jan 11, 2013

how to i connect mu linksys router to my ubee cable modem

View 2 Replies View Related

Linksys Cable / DSL :: X2000 Router / Modem Only Gives Local Access?

Jun 4, 2012

I've never setup a router before, but when I tried to setup this one it required me to put in the isp ip, subnet, gateway, and dns. I assumed that this was not my ip but the ip of zoomtown which when i looked at the old routers info i figured this was the ip under the configurations summary that said wan ip, perhpaps i was wrong, i'm not sure but this ip info is static it does not change , but I believe the individual computers ip addresses use dhcp and are not static.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G2 Disconnecting From Cable Modem

Jun 10, 2011

Our router is connected through a cable modem and If I connect my computer directly wired to the cable modem, I have no problem, it does not disconnect at all.In comes the router in between, when I connect the router and connect my computer through the router WRT54G2, it works initially then I get disconnected after about 1-2 hours.  This is very regular.  I have a temporary solution by resetting the router via two ways:
1.  Go to the admin page, and perform a release and renew IP method.

2.  Simply power off the router and then on again.

View 3 Replies View Related

Linksys Cable / DSL :: X3000 Modem Router - Cannot Connect To Internet

Mar 26, 2013

I am attempting to install the router but cannot connect to SKY ISP. I can connect my laptop to the router both wirelessly and by cable.

View 5 Replies View Related

Copyrights 2005-15, All rights reserved