Linksys Cable / DSL :: WCG200G Wireless Resets The Modem?
Apr 27, 2012WCG200G ver.2 resets everytime i use wireless
Firmware Version: 2.0.3.6.12-0608
ADVERTISEMENT
Cable Modem Constantly Resets - How To Stop It
May 17, 2012 For the past few months my cable modem has been rebooting (Power light stays on the rest turn off). I have replaced the modem and have had two technicians out here to no avail. The resets happen often during heavy use.The only errors that seem to happen frequently while this occurs are..
5/17/2012 20:33120207004Configuration File CVC Validation Failure
5/17/2012 21:54200005003Started Unicast Maintenance Ranging - No Response received - T3 time-out
5/17/2012 21:54200006003Unicast Maintenance Ranging attempted - No response - Retries exhausted
5/17/2012 21:54180002003UCD invalid or channel unusable
5/17/2012 21:54140206003DCC aborted unable to communicate on new upstream channel
[code]...
2701HG-B Modem Resets Randomly When Using Wireless
Apr 28, 2011I have a 2Wire 2701HG-B modem/router provided to me by AT&T for my DSL service. I have one issue and a seperate question sort of related to it.The issue I'm having is that whenever a laptop gets online with wireless internet the modem will randomly reset connection.Some times it will do it every 30 seconds, some times it will be once an hour or even more.It works perfectly fine on any laptop when plugged in with Ethernet cable but only with wireless it will glitch out. It does this whether it is the only computer online on the network, and also when there are a few others online so it's just the simple fact of the wireless resetting it somehow.I've done lots of google searching and some people say changing the line pair settings fixed it for them. Some say changing from b/g mode to just g mode fixed it. I've tried every thing that I've come across and nothing has worked so far. Apparently this is a very common problem for this model I just can not find the right solution that has worked for other people, to work for me as well.
if I were to want to make this modem/router just a modem and hook up my own router for N wireless would this be possible? I know I've read ways about putting combos in DMZ mode or something but I don't really know what I'm looking for because everything is worded different in this modem's settings.Can any one provide any insight as to if this is possible, and if it's even worth it to do so? Mainly worried about the first thing I mentioned though, this is just a side note.
Linksys Cable / DSL :: Atlanta 2100 - When Installing Driver To Use Usb Cable Modem Does Not Recognize It
Dec 13, 2012I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
View 3 Replies View RelatedLinksys Cable / Dsl :: Cable Modem Dpc3825 - Hook Up To Smart Apps Wifi?
Apr 23, 2013With this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies View RelatedLinksys Cable / DSL :: BEFCMU10 Need To Install And Get Cable Modem Working
Mar 24, 2011I inherited a BEFCMU10 v.3 cable modem from my boss who switched to FiOS and I would like to use this with my Comcast connection.All I received from him is the cable modem and power adapter, what do I need to install and get this cable modem working? My router is WRT-54G.
View 2 Replies View RelatedLinksys Cable / DSL :: Can't Get A New IP From ISP When Cable Modem EPC3925 Is Set To Router Mode
Mar 23, 2012I can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG320N And Cable Modem Connection?
Jun 4, 2010some reference material about configuring my WAG320N to use my cable modem via Ethernet port 1. I've seen it mentioned that's its possible, however I've been unable to sort it out myself.
And before you ask, I've brought the DSL router as I'm moving in the next 12 months and my new base will not have access to cable internet and I'll be reverting back to DSL.
How To Connect Ubee Wireless Cable Modem To A Linksys Router
Jan 11, 2013how to i connect mu linksys router to my ubee cable modem
View 2 Replies View RelatedLinksys Wireless Router :: WRT54G2 Disconnecting From Cable Modem
Jun 10, 2011Our router is connected through a cable modem and If I connect my computer directly wired to the cable modem, I have no problem, it does not disconnect at all.In comes the router in between, when I connect the router and connect my computer through the router WRT54G2, it works initially then I get disconnected after about 1-2 hours. This is very regular. I have a temporary solution by resetting the router via two ways:
1. Go to the admin page, and perform a release and renew IP method.
2. Simply power off the router and then on again.
Linksys Wireless Router :: EA2700 Not Recognized By Cable Modem?
Feb 24, 2013I have an EA2700 (fimware "classic" 1.0.14.129982) that used to work perfectly fine with a Comcast cable modem. I just recently switched to Charter with an Arris TM902 modem and that's where the problems started. The cable modem will not recognize my router. I have to plug in a computer into the cable model when it starts up. Then I need to clone the MAC address and restart the router (after disconnecting the computer). Why isn't the cable modem recognizing the router when I restart it? I guess this could work if it would be a one time thing but I had to power-cycle the modem and it stopped recognizing the router even with the cloned MAC address. So I had to do the whole spiel again.
Is there any way to make this work easier? Should I update my router's firmware to the "smart" one?
Linksys Cable / DSL :: WAG54G2 / Error 322 When Reinstalling Wireless Modem?
Feb 8, 2011I have WAG54G2 wireless modem. It has been working perfectly until I formatted my desktop computer and reinstalled Windows XP. Now I want to reinstall my modem but is gives this error:"Error 322 New Router or Gateaway Not Detected"The old wireless configuration still works with my laptop, but I am afraid of losing my wireless connection so I did not reset the modem. Do I have to reset it?
View 1 Replies View RelatedLinksys Wireless Router :: WRT54GS With Mac OS 10.6.8 And RCN Cable Modem Not Working?
Sep 27, 2011I have a Linksys WRT54GS, version 6 with Mac OS X (version 10.6.8) hooked up to a Scientific Atlantic cable modem, with RCN as the ISP.
Recently, RCN had some network issues, and so I had to power down and reset my modem. The modem is working fine now -- no problems at all when the Mac is connected direclty to the modem.
The router's network is OK in that I can connect the Mac wirelessly to the network, but I can't connect to the internet through the router (through neither the wireless or wired connection).
I have downloaded the latest firmware update for the router, following the Linksys site instructions.
I did call Linksys tech support on the advice of RCN, and they said that the router does appear to be working (power, WLAN, and Internet lights are on), but they would be charging me nearly the cost of a new router to fix the problem.
Linksys Wireless Router :: EA3500 - Creating DMZ By Connecting To Cable Modem
Feb 20, 2013I want to create a DMZ by having a less sophisticated router connected to cable modem, which would have the webserver which contains no sensitive information, and then the EA3500 to which my laptops and desktops which contain sensitive information would connect to. Can CCC work through that first router?
View 6 Replies View RelatedLinksys Wireless Router :: E1200 Can't Acquire IP Address From Cable Modem
Apr 9, 2013Reset to factory defaults. DHCP turned on. Status page shows black for router IP, gateway, and DNS addresses. Powered router+cable modem on/off multiple times already. I also have another wifi router (WRT120N) and it works fine.
Pretty simple connection. Just a ethernet cable between the cable modem and E1200 internet port (Cable modem <---> E1200)
Linksys Wireless Adapters :: WMP300N Couldn't Get WAN IP Address From ISP's Cable Modem
Jan 12, 2012 there could be complications, but it appears the WPM300N is 'bad'?my wife's computer (XP SP3) recently started freezing at random times. Once while surfing she got a BSOD. The last few days it had gotten much worse, sometimes the freeze occuring during the boot process, and again at random points.
What I tried was determing all new s/w installs and deleting them still didn't fix the problem. Next I used some Norton Ghost back-ups restoration from the time period she had the freezes... still was freezing. Next an image from long ago and it still froze. Got me thinking it was h/w related. She has a wireless mouse and keyboard. Put in wired units, still froze.
A few days ago my router died. It couldn't get a WAN IP Address from the ISP's cable modem. ISP verified the modem was working by having me attach directly to it one of my wired computers. This router was a new (2 months old) ASUS RT-N56U. I put back my old LinkSys WRT600N. In doing so I had to change the passphrase. This turned out to be a big assist to me determining what went wrong.
On each of the restores of an image, the system never froze, not until I connected to the router by giving the proper passphrase, but usually after that. When it happened (I did multiple image restores) when I was in Safe Mode with Network as it was connecting, the implication was clear it was the WMP300N.
As luck would have it, I had another card taken out of my old computer. Put that card in and so far, he computer has NOT frozen up. I've restored all the deleted items and Windows Updates and all other Updates (Norton ISS, Flash, Adobe) and it is running fine.
Linksys Wireless Router :: WRT610n 2 Networks From 1 Comcast ISP Cable Modem
Jan 12, 2010I have a need to have 2 seperate networks from my comcast cable modem.I was hoping to plug a 5 port hub into the cable modem and then plug both the wrt610n and the wrt54g into the hub. Seem that only one of the routers will get an ip assigned from Comcast.Is there a way to have one ISP cable modem and create two different home networks with the two linksys routers, thus two separate independent networks?
-Network 1: public household use and family (Jane's wireless laptop, household PC's etc).
-Network 2: private household/company use and separate from the public family network (company wireless laptop/company PC, un-secure media server).
Linksys Cable / DSL :: Wag120n Modem Router Wireless Security Setting?
Jan 14, 2012I am using wag120n modem router but is confused abt how to setup it's wireless security.The wireless securit setting recommended in tutorial given here is very different from what is given in my routrs setting up page.
I don't know how to handle the key renewal option.If i leave it as 3600 seconds does that mean i have to enter a new key in my wireless device connected to the router after every 1 hour?
Linksys Wireless Router :: EA4500 - No Configuration Capability In Cable Modem?
Aug 26, 2012 I just switched to Roadrunner Lightening via Brighthouse Networks. There is no configuration capability in the Cable modem/ router / wireless - Ubee provided to make the Modem a bridge. You have to call Brighthouse to do that. They indicated that they only do that for supported routers and the EA 4500 is not one of them. I'm ready to call them to say I have one of the supported modems so "do it" and then find out what happens.
Meanwhile I have connected my EA4500 through their router and have a network in a network. I've noticed another more significant problem. The speeds through the EA 4500 drop to 90%. Is there something wrong with the router configuration that would cause this significant drop in speed? I'm afraid if the problem is the EA 4500.
Linksys Wireless Router :: E3000 Unplug Modem Power And Tv Cable
Nov 25, 2011i have an e3000 linksys cisco router. i havent had any problems before until i tried adding a new computer via cat5e ethernet cable. The first computer always is connected fine whether i unplug the router or modem in any order and replug. i dont know much how to fix this. ive tried some unplugging method once but it only worked until i turned the computer off and back on later. i am also running 2 xboxs with no trouble. i used cisco connect to diagnose problem but it just told me to unplug modem power and tv cable and i did that with no luck.although i have good equipment, the internet is pretty slow.i have the best service of my provider that states it has upto 50 mpbs download speed.i ran the cisco internet speed test and only got a max of 20 download and 5 upload.how could i speed this up?
View 9 Replies View RelatedLinksys Wireless Router :: E3200 No Ethernet Connection Or Cable Modem
Mar 6, 2013We have a E3200 wireless router but our only connection is wireless. There is no Ethernet connection or cable modem. Presently I am unable to bring up the web page ie...10.100.x.x for entering the id/pw to login. Router is setup with default settings. Is there a setting that needs to be changed from the setup menu or this type of setup will not work with this router.
View 9 Replies View RelatedLinksys Wireless Router :: EA6500 Doesn't Ask For IP Address From Cable Modem
Sep 26, 2012Attempting to get EA6500 working with TWC Motorola Surfboard SBV5220 modem, which has been working just fine for the last 2 years with a Linksys E3000 router. DHCP client in the EA6500 either doesn't ask for an IP address from the cable modem or the modem just isn't supplying one. With the E3000, you could see the IP address assigned by the cable modem and the primary and secondary DNS server addresses provided, and if the DHCP request didn't work, these addresses would be all zeroes. But, with the EA6500, I can't find an equivalent screen that shows these assignments, or zeroes when the DHCP request fails.
View 1 Replies View RelatedLinksys Wireless Router :: Arris Cable Modem Not Working With WRT54G
Mar 7, 2007I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them.
View 9 Replies View RelatedLinksys Wireless Router :: Can't Access Cable Modem Status Page With EA6500
Apr 5, 2013I cannot access my Motorola SB6141 cable modem status page at 192.168.100.1 thru the EA6500 router. I can bypass the router and can connect to the status page with no problem. Is there a setting to change or can I possibly do port forwarding to access it?
View 9 Replies View RelatedLinksys Wireless Router :: Disconnect WRT54G And Hard Wire To Cable Modem
Feb 5, 2013I am recieving error 619 (port for connection was closed) when trying to connect over my wireless connection. If I disconnect the WRT54G and hard wire to the cable modem I can VPN in without a problem. I have enabled IPSec / PPTP / L2TP on the VPN security tab and have reset the wireless modem.
View 4 Replies View RelatedLinksys Wireless Router :: E3000 Cannot Connect To Cable Modem After Firmware Upgrade
Aug 28, 2011Upgraded my E3000 from 1.0.02 to 1.0.04 and now I cant get an ip from my arris modem. I did the 30/30/30 reset and everything but no luck. I've had to plug the modem directly into the computer for now. Where can I find the 1.0.02 download or how can I fix this?
View 3 Replies View RelatedLinksys Wireless Router :: E2000 Setup With Motorola Surfboard Cable Modem
Jun 10, 2011I recently switched from dsl to cable. I have a e2000 router that I would still like to use. The modem I have is a Motorola Surfboard SB6121. It has no options that I can modify. The modem has a built in DHCP server. However, I can't modify it and I don't like the ip configuration it uses. For the time being I have the modem connected to a switch which is working fine. What I would like to know is how to configure the e2000 to use the modems connection. I used PPPoE for DSL and had login information.
View 2 Replies View RelatedLinksys Wireless Router :: WRT320N Resets Wi-Fi Settings To Default?
Dec 1, 2011My router automatically sets the wireless network settings to the original default. Sometimes after 1 hour sometimes after a week. It resets to automatic instead of the manulal settings I use for configuration. Changes the SSID to Linksys and disables wireless security.
View 5 Replies View RelatedLinksys Wireless Router :: DPC3825 Cable Modem Gateway - Can't Access Admin Part
Sep 20, 2012i have a dpc3825 cable mdem gateway i spent 4 hours on the phone with charter yesterday i cant access the admin part of the router i go to 192.168.0.1 and up comes the setup username and password i have reset it numerous times i have left it blank as per instructions i have tried admin and blank cusadmin and password i cant get in
View 1 Replies View RelatedLinksys Cable / DSL :: WAG160N Modem Just Dropped Wireless Connection Constantly In Various Time Period
Sep 28, 2012I've bought a "WAG160N v1.0 Annex A" almost 2 years ago. I never used it's wireless feature untill we moved our house. Now it's like 4 month I'm using its wifi feature and I've got to admit I'm really frustrated by its functionality!
For months the modem just dropped wireless connection constantly in various time periods. Somtimes it went like 2 days without any problem but some other times I had to change channel every 15 minutes for it to get back working. And yes it didn't get fix until I changed the channel, otherwise clients had to wait several hours for a 50/50 chance of reconnection. Now It's two days the changing channel trick no longer works. I tried all channels and even put my notebook next to the modem but no luck. The notebook sometimes connnects to the access point but disconnects after a few seconds. Somtimes it doesnt even detect the SSID of my WAG160N modem. Some friends suggested that the wireless hardware of my modem is broken and no longer works but I'm eager to know if it is broken why is it still broadcasting and sending signal.
I've tried everything from upgrading and downgrading firmware to turning on and off the modem several times and changes modem position. And even tried the G-only 20MHz mode.We are at a very crowdy place. Using inSSIDer I could pick about 15 other access points. Only few of them are using Wireless-N, most of them are using Wireless-G.This is the inSSIDer diagram of my WAG160N modem from a client: [code]
Linksys Wireless Router :: E1000 Connected To Modem Via Ethernet Cable Produces 16.0 Speeds
Jan 18, 2012I have DOCSIS 3.0 modem and a Linksys E1000 wireless router with which I get reults from SpeedTest of 8.6 mps down, 1.57 mps up up from 15 mps service from cable provider. Connected to modem via ethernet cable produces 16.0 speeds. Do I need to upgrade the router or are my settings wrong?
View 1 Replies View RelatedLinksys Wireless Router :: EA3500 IPV6 Tunnel Resets To Automatic
Jan 27, 2013I have to go back into settings and deactivate the IPV6 tunnel daily to keep access to youtube. My provider does not support IPV6. Saving changes has no effectIs there a way to ensure that the IPV6 tunnel remains deactivated?I have firmware version 1.0.30 build 126544 2011-12-24. Firmware update function says I got the latest version.
View 5 Replies View RelatedLinksys Wireless Router :: Wrt160n V3 Resets Constantly While Streaming From Netflix
Feb 27, 2010I just got a linksys after years of using a single netgear, this is the second we've gotten in the last month... But each time we have the same problem, the thing resets constantly while doing streaming from netflix, over wifi, and resets the entire router. I've updated to the latest firmware but i'm ready to just throw this out and put our old netgear back up.
View 4 Replies View Related