Connect Netgear Router N600 Without Using Ethernet Cable?

Dec 6, 2012

I have internet through my cable company and currently use their wireless netgear router. I purchased a Netgear Router N600 but it does not have a port for the cable connection. Can you recommend the correct wireless router

View 1 Replies


ADVERTISEMENT

Dell :: Dimension 3100 / E350 - Connect Ethernet Cable From Netgear Router

Dec 26, 2011

Using a Dell Dimension 3100/E350, where do I connect the Ethernet cable from Netgear router.

View 1 Replies View Related

Connect Netgear N300 Wireless Router (wnr2000v3) To Extend Wifi With Ethernet Cable

Jan 22, 2013

I have an arris broadband modem combo and the wifi signal in the basement is poor I tryed to connect a netgear n 300 wireless router (wnr2000v3) to extend the wifi with an ethernet cable but the neatgear router does not have an internet connection.

View 5 Replies View Related

Netgear N600 Router Won't Connect To Internet?

Jul 22, 2012

Trying to get my Netgear N600 router to connect to the internet...nothing will get it to connect.I am able to follow step-by-steps to resolve this

View 14 Replies View Related

Netgear N600 Wndr3700 Can't Connect To Router?

Jun 4, 2012

I puchased the N600 WNDR3700v3 Dual Band Gigabit Router. I am able to see my wireless account I set up and is out there to connect to, but I cant connect. I can connect with an ethernet cord, but nothing wireless. It doesnt work for my home or work laptops. Prior to this I had another wireless set up and I am tempted to plug that one back in.

View 1 Replies View Related

Netgear N600 - Laptop Won't Connect To New Router

Jun 12, 2011

Just bought a new Netgear N600 router, hooked up 4 wired computers with no problem and got several wireless devices to hook up without issue. My laptop however, will not give me internet access when accessing the network wirelessly.

The access is labeled as Local Only, and the network is considered unidentified. Signal strength is excellent, and it reads the name of the new wireless server I created. It prompted me to enter the passphrase, which I did, and now my laptop is stuck on local only.

I tried updating my adaptor drivers but they are all up to date, and I tried to enter my adaptor into the address reservation on the router configuration page using the laptops MAC address and IP address.

View 12 Replies View Related

Windows 8 Can't Connect To Netgear N600 - DGND3700 Router

Feb 17, 2013

My son just got an Asus Laptop from his school. It is running Windows 8.It connects to other peoples WIFI, just not my home WIFI.When he got it home he found the network, entered the password and nothing happened. Now it can't even find the network.There is nothing wrong with the router as every other device connects fine.The router is a Netgear n600 - DGND3700?

View 3 Replies View Related

Computer Won't Connect To Internet And Can't Dial Into Netgear N600 Router

Apr 3, 2012

I have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.

View 5 Replies View Related

Connecting PC (Windows 7) To Router (Netgear DGN2000) Via Ethernet Cable?

Oct 18, 2012

I am having problems connecting my PC (Win7) to my Router (Netgear DGN2000) via ethernet cable.Wi-fi is working fine but I want to speed up my connection using the PC's Gigabit port. Here are the problems:

- When connecting via wi-fi everything is fine

- When enabling my LAN WITH wi-fi still enabled I lose all internet connectivity

- When enabling my LAN and disabling wi-fi lose all internet connectivity

Here is my IP Config when both are enabled :

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:Windowssystem32>ipconfig

Windows IP Configuration[code].....

View 4 Replies View Related

Netgear DGN2200 - Pc Wont Recognise Ethernet Cable

Apr 29, 2012

I am trying to connect a 2nd PC to my Netgear Router DGN2200. The first PC is working normally with full internet capability. I have tried connecting the second with an Ethernet cable but it wont recognise it .

View 7 Replies View Related

How To Install A Netgear N600 To A U-verse Router

Apr 3, 2012

how to wire a netgear n600 to a U-verse router in order to strengthen the wifi signal

View 1 Replies View Related

Can't See HP Printer On Network Using A Netgear N600 Router

Apr 29, 2011

My HP printer finds my network, signs on just fine, has internet. My 2 wired PCs are connected and have internet. My 2 wireless laptops find the network and have internet. Everything has internet successfully thru the router....not one of them can print anything because not one of them can see the printer that I know is there.

View 3 Replies View Related

Netgear N600 Router - Signal Drops Significantly

Nov 7, 2012

I have a netgear n600 router and in the room its in i get around 50 down and 12 up but in other rooms it drops significantly(the highest ive gotten is 11 down in other rooms). is there any setting i can go into.

View 3 Replies View Related

Netgear N600 Wireless Router Stopped Working?

Jan 5, 2012

[CODE]My router stopped working when I tried to connect my new Samsung Smart TV to the wireless network by using the menu on the tv. I had to go and press the WSL button on the router. I pressed what I though was the WSL button and now my router doesn't work. I has three lights lit up, the power on light, a small green blinking light and an amber light by the number 1.I've gone to the Netgear website and they want $69 for assistance to get my router up and running. I can buy a new router for that much money. There has to be an easier way.

View 2 Replies View Related

No Wired Connectivity With Router (Netgear N600 WNDR3800)

Nov 3, 2012

I tried using an ethernet cable (cat 6) to connect my laptop (Sony VPC-1190X) to our gigbit router (Netgear N600 WNDR3800), but I get a message that there is no internet connectivity and the light representing that port on the router does not turn on.So, dead ethernet port on the router? Nope - unplugged the working printer from the router and used that ethernet port - same result.so dead ethernet port on the laptop? Nope - plugged the laptop into a gigbit switch (D-link DGS-2205) and instantly got internet connectivity. Note that this switch is plugged into the aforementioned Netgear router.For good measure, I tried power-cycling the router and laptop.

BTW - I can connect the laptop to the router wirelessly but I am trying to make use of the faster transfer speed of the ethernet connection.

View 5 Replies View Related

Netgear N600 Router / Wifi Drops Off Every 20 Seconds

Nov 8, 2011

My net drops off every 20secs like clockwork, only affecting the wireless.I bought a new router yesterday to see if that would work, but it hasn't. At the moment, my router is connected to the modem, and my computer upstairs is running through the wireless connection from the router (not the modem)

My router is a NetGear N600 Wireless Dual Band... and my modem is a NetGear Rangemax wireless My computer is running Windows 7 and has a Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Network Adapter(im connecting to my network via the 2.4ghz... not the 5ghz)I've tried doing the whole, ipconfig/ release

View 7 Replies View Related

Netgear N600 Uninstall Old Router Software Before Installing New?

Apr 23, 2011

I previously had DSL with my own combo modem/wireless router. I cancelled DSL and got Cable broadband instead. I've already unplugged my DSL modem/router and have my cable modem hooked up, all is running well. I bought a new Netgear N600 wireless router that I want to set up. Do I have to uninstall any software or files from my previous DSL modem/router before installing my new cable router?

View 3 Replies View Related

Forgot Netgear N600 Router Login And Password?

Jan 10, 2013

what is the WI-fI Network name (SSID) and Network Key (password) of my Netgear N600 Wireless Dual Band Router WNDR3400v2

View 1 Replies View Related

Netgear N600 - Change UPnP Setting On My Router?

Sep 28, 2011

How do I change the UPnP setting on my router?

View 2 Replies View Related

Huawei 521i Router - Can Connect With Ethernet Cable But Not Wifi

Oct 15, 2012

I have a huawei 521i router that I recently reset back to factory settings. I have been trying to set up my wifi but something is wrong. I can connect with my ethernet cable but not wifi. I have set up my wireless connection and I can see it in the list.

View 1 Replies View Related

Netgear N600 Router - Unable To Ping Default Gateway

Oct 24, 2011

about two days ago my main PC lost the ability to connect to the internet. I'm useing a trendnet tew-687ga adapter and a netgear n600 router. I can't ping the default gatway 192.168.1.1

View 2 Replies View Related

Netgear Fvs318g Fw / N600 Wifi Router Can't Access Webgui?

Apr 26, 2011

I recently put in a Netgear firewall, configured it, its running no problem. Then I setup a new Netgear N600 wireless router, configured it, gave it a static IP, connected to it, works like a charm. Thing is, when I try to access the web gui I receive nothing.. Is the Netgear firewall taking priority or something? I went directly connected to the netgear wifi router and double checked to make sure that there was no settings restricting administration from wifi users, etc..

View 3 Replies View Related

NetGear N600 Router Won't Work (Fiber Optic Internet)

Feb 27, 2013

I got new internet last Thursday. It is fiber optic through VTX1. I am running windows 7. I can connect to the internet just fine directly but when I try the netgear it tells me No Internet Connection. When I go through the setup process it tells me No Ethernet Cable is Plugged Into The Router Internet Port. When I hook up my very old Cisco router the internet and Wi-fi work just fine. I have updated the drivers and have windows firewall off. This is it plugged directly in:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersKellan>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kellan-PC
Primary Dns Suffix . . . . . . . :

[code]....

View 2 Replies View Related

Make A Modem Splitter To Hook Up Netgear N600 Wireless Router?

May 1, 2012

I have a PC modem and recently purchase a netgear N600 wireless router. Do they make a splitter of some sort. So I can use both the PC and IPad? If they make a splitter?

View 5 Replies View Related

Wireless Router Configuration Netgear N600 It Redirects To Support Website

Apr 6, 2012

i've been tring to configure our netgear N600 router, it directs me to the support homepage all the time after we half through the configuration and got disconnected at first try. now i've tried clean dns, reset internet settings, nothing seems to work...

View 1 Replies View Related

Netgear N600 Dual Band Gigabit Router - Channel Changed But It Still Seems To Lag?

Oct 20, 2011

I have a Netgear N600 Dual Band Gigabit Router and my roomate and I both have the wireless xbox and when we connect to xbox live and find a game on call of duty mw2 we lagg our butt off nd we tried changing the channel on the router but it still seems to lag.

View 11 Replies View Related

Can't Setup Netgear N600 Wireless Dual Band Gigabit Router

Dec 1, 2012

I confused ,with which modem to purchase to set up my n600 wireless dual band gigabit router wndr3700, i'm on boardband with no modem

View 1 Replies View Related

Connect Canon MX700 Printer Via Ethernet Cable To Linksys Router - WRT54G2

Jan 8, 2013

I want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.

View 5 Replies View Related

Windows XP Home PC Won't Connect Properly Via Ethernet Cable To Router (Belkin N150)

Mar 27, 2011

My WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150). Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLMSYSTEMCurre....'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine. I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.

View 6 Replies View Related

WRT54G2 - Connect Canon MX700 Printer Via Ethernet Cable To Linksys Router

Jan 8, 2013

I want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.

View 1 Replies View Related

Slow Wired Connection On Netgear N600 WNDR3700v1 Dual Band Gigabit Router?

Aug 6, 2012

I have a Netgear N600 WNDR3700v1 Dual Band Gigabit router and am having a problem with the wired connection with my PC. Everything wireless in the house works fine. In fact, I also have a Direct TV box hooked up for on demand and a sling box hooked up (both wired) and they work find. It's just my PC that is having issues. If I bypass the router and hook straight into the modem, it runs fine also so I have something going on between the router and this PC. I updated the NIC driver and this did not work. Before the update in the device manager, it said it was a NIVIDA nForce Network Controller (if I remember right) and now it says NIVIDA nForce 10/100 Mpbs Ethernet. It was suggested that I change my speed and duplex to match the router after I update but I am unsure what to change it to.

View 11 Replies View Related

Routers / Switches :: Difference In Ethernet Cable And Ethernet Networking Cable?

Apr 28, 2013

Is there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.

View 1 Replies View Related

SMCD3G Cable Modem / Belkin Play N600 Router - Small Office Network?

Apr 21, 2011

I'm trying to network a small office and have the following devices:

SMCD3G Cable Modem
Belkin Play N600 Router
Digi Mil-H1130 8 Port Ethernet SOHO Hub
Hubbel Cat5 Patch Panel (goes up to 12)

We're replacing our DSL line with a Cable line. Our DSL was a one piece wireless router/modem. When it was installed, it was inside our office, next to the server, and plugged into Wall Jack 1 for all the other computers to connect to. Our server plugged into this modem/router. We didn't have the Belkin Router at the time. The Patch Panel wires went into the Hub behind our office and everything was fine.

The cable modem is now next to the Hub and Patch Panel. I bought the router since we didn't have the wireless feature that the DSL had and everyone I spoke to said I need a router to set up the office. I ran one of the LAN lines from the modem into the Router where it says Modem (WAN). From the Router, I ran the line 1 (LAN) into the Hub. (Does the number matter if nothing is plugged into it in our office?) No computer is able to connect to the internet except my laptop which connects wireless. It works fine.

Another problem. We have a server computer that's Unix based. In order for anyone to connect to the server to access the office software used, the IP address of the router must be 192.9.2.1 or the computer your using won't connect via Multiview 2000 Terminal Emulator. I can't connect to the server because the IP address of the router is still 192.168.2.1. I don't know where I have to go in the router settings to change it. I've tried a few spots and it tells me the IP address is invalid. The settings I had with the DSL modem/router were:

Modem IP address - 192.9.2.1
Subnet Mask - 255.255.255.0
DHCP Start Address - 192.9.2.100
DHCP End Address - 192.9.2.150

It's not like I need to run wires. Everything is set. If something is plugged into a wrong spot, I can switch it.

Additional info:
There are 4 computers in the office and 8 numbered wall jacks.
Server computer - Wall jack 8 (IP address of this machine - 192.9.2.25)
XP Machine 1 - Wall jack 4 (can't connect to server! No internet.)
XP Machine 2 - Wall jack 1 (Is able to connect to the server! No internet.)
Win CE Machine - Wall jack 9 -

I assume. I have a wire that goes through the wall on this machine and it isn't marked. (Rarely used so not sure about server connection)

Wireless Windows7 laptop - connects to the internet fine since it bypasses all these wires. Can't connect to server.

Under the DHCP client list, only 2 computers are listed. The one that has internet is my computer. The other computer listed is wall jack 4 and that has internet now.

my computer - 192.9.2.2
wall jack 4 - 192.9.2.3

The router IP is 192.168.2.1 and the Cable Modem is 10.1.10.11. If I type either number into my web browser it will take me to the router setup page. I don't know where/how to check if it's only one device acting as DHCP. What I want to do is be able to get online with all the computers as well as have access to the software on the server through the office wall jacks. In order to do that I need the router IP address to be 192.9.2.1 and then I'd be able to connect to it.

Right now, one computer is able to connect to the server via hard wire but can't connect to the internet.Another computer is able to connect to the internet via hard wire but can't connect to the server.My laptop can connect wireless to the internet but not the server. In a perferct world, all the computers should be able to connect to both the internet and the server. Right now, it's one or the other with both hard wired machines and I don't know why. Is there a wire not in the hub right? Is a patch panel wire plugged into the wrong port of the hub? I don't know what's supposed to go where. tell me "wire X from the modem goes to Port Z of the router, and Wire Y from the the router goes to number V on the Hub, and that wire goes to number T on the patch panel for the Port number R in the office to work..." I'll try it.

Then I think all I need to do is change the router's IP address to 192.9.2.1 and everyone should be able to connect to the server through the Multiview 2000 Terminal Emulator.When I tried to change the IP address on the router it's telling me it's not valid. Under LAN settings it says 192.168.2.1 - when I try to change it to 192.9.2.1 it tells me LAN IP address is invalid. I clicked on More Info below that in the router page and a pop up gives me info. It says:

The "IP address" is the Internal IP address of the Router. To access the advanced setupinterface, type this IP address into the address bar of your browser. This address can be changed if needed. To Change the IP address, type in the new IP address and click "ApplyChanges". The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:

192.168.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)

10.y.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)

172.z.y.x (where z is anything from 16 to 31, and y is anything between 0 and 255, and x is anything between 1 and 254.)

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved