Netgear N600 Router / Wifi Drops Off Every 20 Seconds

Nov 8, 2011

My net drops off every 20secs like clockwork, only affecting the wireless.I bought a new router yesterday to see if that would work, but it hasn't. At the moment, my router is connected to the modem, and my computer upstairs is running through the wireless connection from the router (not the modem)

My router is a NetGear N600 Wireless Dual Band... and my modem is a NetGear Rangemax wireless My computer is running Windows 7 and has a Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Network Adapter(im connecting to my network via the 2.4ghz... not the 5ghz)I've tried doing the whole, ipconfig/ release

View 7 Replies


ADVERTISEMENT

Netgear N600 Wifi Connects And Reconnects Every Few Seconds?

Feb 27, 2013

I have a Netgear N600 (I'm not sure if this is the model number...) and the wireless adapter that was built into my P8Z77-V Pro is an Atheros AR9485. Everything was working fine up until last night, and now I can't seem to connect to anything for more than a couple seconds before it disconnects me again. I should also note that my phone, my iPad, my laptop, and my other PC connect just fine still.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 8137 Mb
Graphics Card: AMD Radeon HD 7900 Series, -1024 Mb
Hard Drives: C: Total - 114470 MB, Free - 72961 MB; F: Total - 953765 MB, Free - 326470 MB;
Motherboard: ASUSTeK COMPUTER INC., P8Z77-V PRO
Antivirus: Microsoft Security Essentials, Updated and Enabled

View 1 Replies View Related

Netgear N600 Router - Signal Drops Significantly

Nov 7, 2012

I have a netgear n600 router and in the room its in i get around 50 down and 12 up but in other rooms it drops significantly(the highest ive gotten is 11 down in other rooms). is there any setting i can go into.

View 3 Replies View Related

Netgear Fvs318g Fw / N600 Wifi Router Can't Access Webgui?

Apr 26, 2011

I recently put in a Netgear firewall, configured it, its running no problem. Then I setup a new Netgear N600 wireless router, configured it, gave it a static IP, connected to it, works like a charm. Thing is, when I try to access the web gui I receive nothing.. Is the Netgear firewall taking priority or something? I went directly connected to the netgear wifi router and double checked to make sure that there was no settings restricting administration from wifi users, etc..

View 3 Replies View Related

Wifi Drops Off Every 20 Seconds Like Clockwork

Nov 9, 2011

Just three days ago, all of a sudden, my net drops off every 20secs like clockwork, only affecting the wireless.At the moment, my router is connected to the modem, and my computer upstairs is running through the wireless connection from the router (not the modem) - though it makes no difference the problem happens with either.

[code]...

View 5 Replies View Related

Netgear N600 Wnda3100vs Adapter - Connecting Wifi To Desktop?

Jan 15, 2013

I bought a netgear n600 wnda3100vs wifi adapter for my desktop.I installed it and everything. Now when I try to connect, it finds my router, but for some reason it will not connect. My router is a 2wire that runs on 802.11g[CODE]

View 1 Replies View Related

Netgear N600 Router Won't Connect To Internet?

Jul 22, 2012

Trying to get my Netgear N600 router to connect to the internet...nothing will get it to connect.I am able to follow step-by-steps to resolve this

View 14 Replies View Related

How To Install A Netgear N600 To A U-verse Router

Apr 3, 2012

how to wire a netgear n600 to a U-verse router in order to strengthen the wifi signal

View 1 Replies View Related

Can't See HP Printer On Network Using A Netgear N600 Router

Apr 29, 2011

My HP printer finds my network, signs on just fine, has internet. My 2 wired PCs are connected and have internet. My 2 wireless laptops find the network and have internet. Everything has internet successfully thru the router....not one of them can print anything because not one of them can see the printer that I know is there.

View 3 Replies View Related

Netgear N600 Wndr3700 Can't Connect To Router?

Jun 4, 2012

I puchased the N600 WNDR3700v3 Dual Band Gigabit Router. I am able to see my wireless account I set up and is out there to connect to, but I cant connect. I can connect with an ethernet cord, but nothing wireless. It doesnt work for my home or work laptops. Prior to this I had another wireless set up and I am tempted to plug that one back in.

View 1 Replies View Related

Netgear N600 - Laptop Won't Connect To New Router

Jun 12, 2011

Just bought a new Netgear N600 router, hooked up 4 wired computers with no problem and got several wireless devices to hook up without issue. My laptop however, will not give me internet access when accessing the network wirelessly.

The access is labeled as Local Only, and the network is considered unidentified. Signal strength is excellent, and it reads the name of the new wireless server I created. It prompted me to enter the passphrase, which I did, and now my laptop is stuck on local only.

I tried updating my adaptor drivers but they are all up to date, and I tried to enter my adaptor into the address reservation on the router configuration page using the laptops MAC address and IP address.

View 12 Replies View Related

Windows 8 Can't Connect To Netgear N600 - DGND3700 Router

Feb 17, 2013

My son just got an Asus Laptop from his school. It is running Windows 8.It connects to other peoples WIFI, just not my home WIFI.When he got it home he found the network, entered the password and nothing happened. Now it can't even find the network.There is nothing wrong with the router as every other device connects fine.The router is a Netgear n600 - DGND3700?

View 3 Replies View Related

Netgear N600 Wireless Router Stopped Working?

Jan 5, 2012

[CODE]My router stopped working when I tried to connect my new Samsung Smart TV to the wireless network by using the menu on the tv. I had to go and press the WSL button on the router. I pressed what I though was the WSL button and now my router doesn't work. I has three lights lit up, the power on light, a small green blinking light and an amber light by the number 1.I've gone to the Netgear website and they want $69 for assistance to get my router up and running. I can buy a new router for that much money. There has to be an easier way.

View 2 Replies View Related

No Wired Connectivity With Router (Netgear N600 WNDR3800)

Nov 3, 2012

I tried using an ethernet cable (cat 6) to connect my laptop (Sony VPC-1190X) to our gigbit router (Netgear N600 WNDR3800), but I get a message that there is no internet connectivity and the light representing that port on the router does not turn on.So, dead ethernet port on the router? Nope - unplugged the working printer from the router and used that ethernet port - same result.so dead ethernet port on the laptop? Nope - plugged the laptop into a gigbit switch (D-link DGS-2205) and instantly got internet connectivity. Note that this switch is plugged into the aforementioned Netgear router.For good measure, I tried power-cycling the router and laptop.

BTW - I can connect the laptop to the router wirelessly but I am trying to make use of the faster transfer speed of the ethernet connection.

View 5 Replies View Related

Netgear N600 Uninstall Old Router Software Before Installing New?

Apr 23, 2011

I previously had DSL with my own combo modem/wireless router. I cancelled DSL and got Cable broadband instead. I've already unplugged my DSL modem/router and have my cable modem hooked up, all is running well. I bought a new Netgear N600 wireless router that I want to set up. Do I have to uninstall any software or files from my previous DSL modem/router before installing my new cable router?

View 3 Replies View Related

Connect Netgear Router N600 Without Using Ethernet Cable?

Dec 6, 2012

I have internet through my cable company and currently use their wireless netgear router. I purchased a Netgear Router N600 but it does not have a port for the cable connection. Can you recommend the correct wireless router

View 1 Replies View Related

Forgot Netgear N600 Router Login And Password?

Jan 10, 2013

what is the WI-fI Network name (SSID) and Network Key (password) of my Netgear N600 Wireless Dual Band Router WNDR3400v2

View 1 Replies View Related

Netgear N600 - Change UPnP Setting On My Router?

Sep 28, 2011

How do I change the UPnP setting on my router?

View 2 Replies View Related

Netgear N600 Router - Unable To Ping Default Gateway

Oct 24, 2011

about two days ago my main PC lost the ability to connect to the internet. I'm useing a trendnet tew-687ga adapter and a netgear n600 router. I can't ping the default gatway 192.168.1.1

View 2 Replies View Related

NetGear N600 Router Won't Work (Fiber Optic Internet)

Feb 27, 2013

I got new internet last Thursday. It is fiber optic through VTX1. I am running windows 7. I can connect to the internet just fine directly but when I try the netgear it tells me No Internet Connection. When I go through the setup process it tells me No Ethernet Cable is Plugged Into The Router Internet Port. When I hook up my very old Cisco router the internet and Wi-fi work just fine. I have updated the drivers and have windows firewall off. This is it plugged directly in:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersKellan>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kellan-PC
Primary Dns Suffix . . . . . . . :

[code]....

View 2 Replies View Related

Computer Won't Connect To Internet And Can't Dial Into Netgear N600 Router

Apr 3, 2012

I have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.

View 5 Replies View Related

WNDA3100v2 - Wireless Drops Every 30-60 Seconds

Jan 28, 2011

My wireless network is connected through a Netgear WNDR3700 router. My pc (see sig) connects to the router via a Netgear WNDA3100v2 adaptor.

Every 30-60 seconds I hear the audible alert & dialog box telling me my computer is now connected to the internet. So that means every 30-60 my computer must be losing access to the internet. I've been pulling my hair out trying to figure out what's going on, to no avail.

I've done all the obvious troubleshooting.

- rebooted cable modem
- rebooted router
- uninstalled & reinstalled drivers
- connected via both 2.4g & 5g radios
- reset & reconfig router settings

View 6 Replies View Related

Make A Modem Splitter To Hook Up Netgear N600 Wireless Router?

May 1, 2012

I have a PC modem and recently purchase a netgear N600 wireless router. Do they make a splitter of some sort. So I can use both the PC and IPad? If they make a splitter?

View 5 Replies View Related

Wireless Router Configuration Netgear N600 It Redirects To Support Website

Apr 6, 2012

i've been tring to configure our netgear N600 router, it directs me to the support homepage all the time after we half through the configuration and got disconnected at first try. now i've tried clean dns, reset internet settings, nothing seems to work...

View 1 Replies View Related

Netgear N600 Dual Band Gigabit Router - Channel Changed But It Still Seems To Lag?

Oct 20, 2011

I have a Netgear N600 Dual Band Gigabit Router and my roomate and I both have the wireless xbox and when we connect to xbox live and find a game on call of duty mw2 we lagg our butt off nd we tried changing the channel on the router but it still seems to lag.

View 11 Replies View Related

Can't Setup Netgear N600 Wireless Dual Band Gigabit Router

Dec 1, 2012

I confused ,with which modem to purchase to set up my n600 wireless dual band gigabit router wndr3700, i'm on boardband with no modem

View 1 Replies View Related

Laptop Drops Internet Connection After 10 Seconds

Apr 27, 2011

New laptop, connected to my home network which is very stable and has no history of connection issues. After about 10 seconds the laptop drops the connection. Sometimes it'll come back for a while sometimes not, haven't observed any pattern in this yet, All I've done since starting the computer for the first time is installed all the junk that comes with it (Nero stuff mostly) and installed all windows updates (there were over 60 of them) and AVG Free edition. Before doing all that the connection was still not right but it did hold for a lot longer than 10 seconds. It held for over an hour downloading programs like Itunes, AVG and Firefox, Going to control panel > network sharing centre when the connection is down I see the yellow exclamation mark between my computer and my network. Troubleshooting this resets the network adapter, gives me the error 'The default gateway is not available' and says that it is fixed. The connection then works again for about 10 seconds and drops once more.

View 11 Replies View Related

TL-wdn4800 Wireless Connection Drops Out After 40 Seconds

Oct 18, 2012

I've recently bought a new desktop with a TL-wdn4800 wireless device. when i start up i instantly get full bars for my wireless however after about a minute, it drops down to one bar, and becomes hardly usable. i'm wondering if this is the device turning itself off and reverting back to the default inbuilt wireless device?

View 1 Replies View Related

Network Access Drops For 10 Seconds At Random Times

Nov 7, 2011

We have a bunch of computers(70 aprox) connected to a domain. Since couple weeks ago very strange issues started occuring, internet and network access(path to network share is lost) would come up at random times and on different machines and would last for about 10-20 seconds it would re-connect again.All the computers are using private addresses.Most machines are windows 7, some are xp.Using Windows server 2003 as dc.Since the occurance is so random it's very hard to pin point the cause.

View 1 Replies View Related

Slow Wired Connection On Netgear N600 WNDR3700v1 Dual Band Gigabit Router?

Aug 6, 2012

I have a Netgear N600 WNDR3700v1 Dual Band Gigabit router and am having a problem with the wired connection with my PC. Everything wireless in the house works fine. In fact, I also have a Direct TV box hooked up for on demand and a sling box hooked up (both wired) and they work find. It's just my PC that is having issues. If I bypass the router and hook straight into the modem, it runs fine also so I have something going on between the router and this PC. I updated the NIC driver and this did not work. Before the update in the device manager, it said it was a NIVIDA nForce Network Controller (if I remember right) and now it says NIVIDA nForce 10/100 Mpbs Ethernet. It was suggested that I change my speed and duplex to match the router after I update but I am unsure what to change it to.

View 11 Replies View Related

Dell :: XPS 8500 Special Edition - Internet Drops Every 5-10 Seconds

May 6, 2013

I've been having an issue with my Dell, when it goes into Power Save Mode (not Sleep or Hibernate), my Graphics Card crashes and I can't see anything when I move the mouse to Wake Up my screen. This is something I have come to live with since I hear the Power Supply for my Graphics Card is too weak (AMD 7870). Sometimes, I have to do a Hard Reboot by holding the Power button and then restarting the computer.

I did that yesterday and realized that my internet connection keeps cutting every 5-10 seconds (literally). I'm running Windows 7 Ultimate. What I did so far was uninstall the driver and get the latest one. That hasn't worked at all.

I have 2 other devices connected to my Wi-Fi, a Dell Laptop that is working perfectly and a smartphone. Both of these haven't been dropping the connection at all. I'm thinking that either something became corrupt by doing my Hard Reboots or it's some kind of compatibility issue. I bought this computer in November 2012 and haven't had an issue like this since but now I can't do anything on web because it takes ages to visit websites.

View 2 Replies View Related

Cisco Routers :: WRP400 - Audio Drops For 5 To 15 Seconds On Each Packet Error?

Oct 29, 2012

On several calls i noticed that the outgoing audio stops for 5..15 seconds randomly. I'd say it happens on an average of every 5 minutes.
 
When this happens, i can see that the value after "Call1 Packet error:" increases by one. Why just a wrong packet may stop the outgoing audio for so long? i've much more packet losts (about 3%) but they give me no problem at all.
 
Since a little and cheaper Handytone HT502 gave me intermittent audio too, but the effect was much better (audio still stops, but in a second it comes back), i wonder if is there something i can do by tweaking the WRP400 settings, I'm still using firmware 1.01.00.

View 7 Replies View Related

Linksys Wireless Router :: Ea4500 Wifi Signal Disappearing For Few Seconds

May 6, 2012

My new EA4500 works fine all day, both wireless and wifi, on both bands, but nearly every evening, the wifi signal disappears, as shown on a wifi app for my smart phone, but not on Issid on my laptop, strangely, and my PC laptop and iPad both disconnect, then reconnect.  Smart phone disconnects too.  It isn't like the signal drops in strength, it just goes away! I have tried various settings on modes, and bandwidths, I am using different SSID's on each band, WPA2 security with a long non-dictionary passphrase and MAC filtering.  The hardwire connection works great at 30+ Mbps even when the wifi is disappearing from the wifi scanner and the wifi connections are dropping.  In other words, the cable connection/modem is working fine, but the wifi radio signal stops or the SSID drops off the signal.  I really can't tell, but I know it is becoming very frustrating.  The old WRT54GS works fine if I put it back on-line in the evening when these things start to happen. 
 
I have turned off everything I can think of in the house that transmits or might transmit, in case it is an interference thing.  I have tried disabling the 5 GHz side, since I can't see what is happening on that band, and the last thing I tried was changing the MTU from 1500 to 1400.  So far, the past evening, it was okay, but I am not confident it will stay that way. 

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved