I am trying to connect a 2nd PC to my Netgear Router DGN2200. The first PC is working normally with full internet capability. I have tried connecting the second with an Ethernet cable but it wont recognise it .
View 7 Replies
I have a netgear DGN2200 router with a USB port built in. I also have a WD External Hard drive, When using the hard drive plugged directly into my laptop I get transfer speeds of roughly 20 mb/s,However when I plug the hard drive into the router and transfer wireless i only get 1.2 mb/s.Also I'm looking to get a USB > Ethernet adapter, would this increase transfer speeds wirelessly?If not how do I go about increase transfer speeds?
View 6 Replies View RelatedI currently have a Netgear dgn2200 n300 wireless router (acts as a modem, you know all in one thing), and I have configured the settings on it so I can have an open nat type/port forwarded for gaming and so on. I have my xbox and the desktop connected to it via ethernet and my ipod and laptop connected wireless.
The problem is that the internet just drops out for a couple of mins every hour or so whether I or whoever is on it or not. I have tried changing the cables and filter for the phone line but nothing has seemed to work. Occasionally when the internet drops out it doesn't come back on so I have to unplug the router and so on to get it to work.
It's just starting to get annoying getting disconnected so often especially when the router cost like $200 and is supposed to be good for gaming and stuff, and I can't seem to find out why or isolate the problem. My internet download speed is fairly quick (I can get 1.5mb/s say when downloading a movie/hd youtube) and I get 70 GB a month.
I want to ban a Mac address on this wireless router. [URL]... I haven't really done much in the gateway besides changing password and SSD.
View 4 Replies View RelatedI have a Netgear DGN2200 router/modem and have been having this problem for a while now. Every so often the internet will cut out for roughly 30-60 seconds. There doesn't seem to be any pattern to the connection losses and they can happen at any time in the day (overall it seems to occur every hour and a half, although it can vary). When the internet connection is lost, the little "!" triangle appears at the bottom right. I still have wireless access to the router itself. It also occurs on both my wired computer and the wireless computer. On the Netgear itself, the internet light will either flash rapidly green, or sometimes turn red for a short while. The Netgear is plugged via a splitter into the telephone socket. the old neatgear we had did the exact same thing before it finally died and no longer worked at all. Hence why we replaced it with this one. I also rang AOL about the problem, who said that there may be a problem with the line and that we should ring BT about it. We had the line checked and apparently the line was fine and was not the cause of the problem. Things I have tried include changing the router channel and I have tried changing the splitter in case that was faulty. Do you think it could be a DSL problem on AOL's end? It's possible that the drops coincided with a free upgrade they gave us for faster internet, although time-wise I'm not entirely sure.
View 6 Replies View RelatedI am having trouble with my modem/router the netgear dgn2200 n300. I bought it to replace my older netgear modem/router (same model v2 to v3).The problem is I just keep getting disconnected say every hour or so when I am using the internet and sometimes it can disconnect me 2-3 times in half an hour. I have removed the filter/splitter and plugged the dsl cord from the netgear straight into the wall bypassing the filter and I still get disconnected.When I am online I receive great connectivity and I consider the bandwidth to be just fine for my needs.My question is what do I have to do in the settings of the router or in my internet properties for it to stop disconnecting me as it gets frustrating. I will take any advice except for "get a new router" or "do an isolation test" blah. Simply because 1. It happened with my old router and with my netcomm modem. 2. I have already done an isolation test and somethings not configured properly I think so, I am no networking wizard.
View 14 Replies View RelatedI have a desktop and a laptop connected to one router, my desktop is connected via ethernet wire and my laptop is connected via wireless.
Here's the problem, on my desktop under "Network" in the Windows Explorer, I can see my laptop's name as well as my desktop's name. But when I want to go into my laptop it says "Windows cannot access \<laptop name>".
But, if I go onto my laptop and do the same thing, it works perfectly, no errors, no problems. Both of them have their IPs automatically assigned as well as the DNS server address. Both have File Sharing enabled and both have Network Discovery enabled.
My desktop has Windows 7 64-bit and my laptop has Windows 8 Pro 64-bit. I have tried disabling both firewalls, no luck. I used to be able to connect to my laptop, but now I can't. But I can connect to my desktop through my laptop. My router is a NETGEAR DGN2200
What can I do?
View 6 Replies View RelatedI cant work out how to get my Netgear DGN2200v3 to port forward.Portforward.com describes how to port forward for a Netgear DGN2200 but NOT for the DGN2200v3.The difference between the DGN2200 and the DGN2200v3 is that when I log into the router and go to port forwarding/port triggering there is no box to fill in the server IP address. It just says service name, service type, starting port, ending port.
View 1 Replies View RelatedModem is a Netgear dgn2200
On the modem page with all the settings Under basic settings For connection it says Always Connected The box underneath says idle timeout 5 (that's in minutes)
I am unable to change that number or even get a cursor to appear in that box (I want to change it to a 0 - my internet connection has been dropping out when going idle). I can't right click or anything. That is using Firefox. When I say dropping out, I mean, the 3 computers on the network become unuseable - nothing works and things don't appear to be connected to the internet even though my green ADSL light stays on like it's connected - it is not.
I tried the same modem page in IE, and that box with the 5 in it is still showing 5, but this time it's just grayed out - again, can't be changed. The firmware updates are all upto date (apparently - according to it's check)
how can i connect a Net gear DGN2200 wireless modem router to a D link DGL4500 wireless router ??
View 1 Replies View RelatedI recently purchased the netgear n300 ADSL2+ modem router. I have tried all day to get it to work, but I have not have any success.
ISP: Verizon (Now frontier I think)
DSL light will be solid green, along with the port, wifi, etc... But the internet one stays solid red.I've tried changing dns settings and things, but to no avail. Though I am able to login to the router, and I can get internet if I directly connect to the modem.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersRobert>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Robert-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
I noticed in the router settings that the internet port had no ip address, as in it was just 0.0.0.0.
My Netgear DGN2200 (Name NetgearCS) won't check for firmware upgrade because it says no connection to internet so unable to connect to the Netgear Servers - Yet this laptop I am currently using (wireless connection is turned off on laptop but not router) is wire connected to this same Netgear router and I have internet connection because I am able to post this enquiry. Note the Netgear DGN2200 router gets its internet connection from my Sky Router and is connected by wire to this Sky Router. FYI my iPhone is connected wirelessly to this Netgear DGN200 router (NetgearCS) and is able to connect to the internet. Do you know why my Netgear DGN2200 cannot check for firmware updates?
View 1 Replies View RelatedI want to public to the internet a web + ftp server, all running in the same machine that now is a performance pc, in the future will be a qnap nas ts-220. I don't need extreme performance so my ISP gives me only 12 Mb down and 0,8 Mb up. I will use the nas as download station, ftp server and a web server when I'll public a personal site.
this is the config:
-modem/router adsl2+ that connects to the internet. ISP gives me dynamic ip! it has 192.168.0.1 ip and I think it cannot be changed.
-a firewall hardware zyxel usg 100 with all active UTM services. it has default ip 192.168.1.1. the netgear in the "attached devices" see the zyxel as 192.168.0.2, the same ip zyxel says to the wan1 port.
-a pc or, in the future, a nas that now has automatically assigned ip 192.168.1.34.
I must use a free or paied service as dyndns or something else. If the solution to retrieve everytime the dynamic ip is to set the ddns only in the router/modem netgear then it can only use dyndns.org or .com or .it with the dns of the associated ddns service. For example: if I set a dyndns.it account in the netgear I must set also the dns provided by dyndns.it because if I set google dns or something else the service cannot work.At the moment I tested only with a filezilla server running on the pc directly connected to the netgear, no zyxel in this test.
The config is:
netgear with ddns service provided by dyndns.it, activated with the username and password, in the wan I setup the dmz as 192.168.0.2, in the adsl settings setup the dyndns.it IPs. in the services of the netgear also provided a custom service with ports from 60000 to 60050 and created two rules one for outbound and one for inbound where I let data pass from the wan to the server in the lan 192.168.0.2.
filezilla running on the pc with windows 7 x64 with lan ip 192.168.0.2 mask 255.255.255.0 as th3 netgear and gateway of course the netgear 192.168.0.1. dns servers same as provided by dyndns.it. filezilla configured with only one anonym user without password for testing, default listening port is 60000, passive mode active with range 60000-60050 and for retrieving IP I set default, no Dyndns.it host cause it will not work.
So configured it works fine!problem is when I connect the zyxel between the netgear and the server.how change the default ip of zyxel? in configuration - ethernet - lan port is correct to set there the default and static ip to 192.168.0.3? there are many options! same as dmz you can set there the static ip and what ip?also when you want to public a server zyxel don't say nothing about port-forwarding. it says only create two address objects one with ip of the netgear and one with the ip of the dmz port then create a rule in the firewall section where you set wan to dmz and destination and origin ip selecting the two address objects previously created then you are ok...no, really no! and the ip of the firewall rules in the netgear? which ip do you must set? 192.168.0.2? or 192.168.0.5 if you set it up in the dmz port of the zyxel? no, it is a conflict so you must set another ip.to set correctly the server to be visible in the internet with the netgear + zyxel usg 100?
I have internet through my cable company and currently use their wireless netgear router. I purchased a Netgear Router N600 but it does not have a port for the cable connection. Can you recommend the correct wireless router
View 1 Replies View RelatedI am having problems connecting my PC (Win7) to my Router (Netgear DGN2000) via ethernet cable.Wi-fi is working fine but I want to speed up my connection using the PC's Gigabit port. Here are the problems:
- When connecting via wi-fi everything is fine
- When enabling my LAN WITH wi-fi still enabled I lose all internet connectivity
- When enabling my LAN and disabling wi-fi lose all internet connectivity
Here is my IP Config when both are enabled :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig
Windows IP Configuration[code].....
Using a Dell Dimension 3100/E350, where do I connect the Ethernet cable from Netgear router.
View 1 Replies View RelatedI have an arris broadband modem combo and the wifi signal in the basement is poor I tryed to connect a netgear n 300 wireless router (wnr2000v3) to extend the wifi with an ethernet cable but the neatgear router does not have an internet connection.
View 5 Replies View RelatedIs there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.
View 1 Replies View RelatedI am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.
View 9 Replies View RelatedI have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.
What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?
I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.
View 14 Replies View Relatedi have purchased a sony 3d tv with wi fi, wi fi works fine. firstly cant get my tv to recognise my computer at r all using hdmi lead tv but does not see comp at all have a sony vaio comp.the tv does recognise it on home network but when i try and keeps saying cannot access server
View 1 Replies View RelatedHow to recognise mail user block
View 1 Replies View RelatedMy RV220W is sitting behind a Dynalink RTA1046VW ADSL Modem.
Can't get the RV220W to detect an internet connection through the WAN port. Have got the PPPoE profile set up etc. Have tried the Dynalink in bridging mode, but to no success. Tried the setup wizard.
Firmware is current: v1.0.2.4. The connection is picked up ok through the ethernet ports.
I get into the router ok, using no username and "admin" for password.I set up the key, hit OK, then when I hit "apply" the prompt comes up for the username and password again. I skip the username, enter "admin" for password (just like I did getting into the setup earlier) except now it says it doesn't recognize, or it's invalid, etc.
View 9 Replies View RelatedSo my old router needed replacement and my dad bought a Netgear gigabit ethernet switch instead of a router. It said that it gets 1Gbps when I look inside the local area connection speed. The problem was we tried to use it like a router but only 2 computers could connect to the internet at one time but it was indeed noticeably faster when it came to video streaming speed. We since returned it and bought a Netgear N600 router that says the speed is 300mbps but like my old router it shows the speed is actually 100mbps and the streaming is good for the most part but every now and then slows down. Would using the ethernet switch with our new router work with streaming speeds and connection stability and of course let more computers connect and also use the routers wireless.
View 13 Replies View RelatedI have a network closet where all the ethernet ports in each room of the house is routed to so wired routing performance must be good.I also need a good wifi network since we have multiple laptops and tablets we use around the home. I do have 2.4GHz and 5GHz devices so I need the dual, simultaneous wifi operation.The gear I can choose from to do this:
Asus RT-N56U
OR
Cisco RVS4000 + Netgear WNDAP360
The home is a 2-story unit and the networking closet is upstairs near the front of the house. If I go with the Asus RT-N56U, the wifi network will be centered in the network closet. If I go with the Cisco RVS4000 + Netgear WNDAP360, the Cisco router will be in the network closet and the Netgear WNDAP360 will be connected to an ethernet jack closer to the center of the house.
I have a problem concerning my Netgear XET1001 85 MBit/s Wall-Plugged Ethernet Adapter. My personal computer in my room is connected directly to our router and I'm getting arround 14-15Mbps download speeds. My parents computer is located in a different room and I bought them the Netgear Adapter thinking this was the most effective and simplest solution. Better than a Wifi-Adapter. I cost me quite a lot too to be honest. The problem is my parents are getting speeds of 0.05Mbps and the browser often doesn't even load the pages completely. To me it seems like the data can only travel through the thing very hardly if at all.
We thought this might have to do with the age and RAM of our computer. (512MB of RAM) So we bought a new one a couple of days ago. Turns out: nothing has changed.
The Wall-Pluggs are connected directly to the outlet by the way. I'm trying to give you the most amount of information I can think of so one more thing might be important. Yesterday I brought my parent's PC into my room, connected it to the Wall-Plugg and got speeds of 5Mbps. Although this is better, it's not what I bought this thing for. Even a WIFI connection would be faster would'nt it?
My dad is using a netgear router DG834G V2 and has no problem until recently. He got a new phone and wanted to connect wirelessly but couldn't remember is network key. After playing around with things he's obviuosley changed something and now has no internet what so ever.
I've tried plugging in the eternet cable and accessing 192.168.0.1 but can't see any problems there. When i am able to get a connection it's local only and Internet explorer can't display web pages. And when i unplug the ethernet cable it doesn't always find the wireless connection, and if it does find it, then i have the same problem as when the lead is plugged in.
His ISP is AOL although he doesn't always access the internet via aol, he'll use IE and i'm trying to get him to give firefox a go.
I have tried disabled both windows firewall and AVG firewall and individually but still keep getting the message internet explorer cannot display webpage.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Dave-PC
Primary Dns Suffix . . . . . . . :
[Code]....
I have an existing Ethernet 100meg LAN and I want to add a wireless capability. I have looked at some products and it is confusing. Range extenders for about 40-50 UK GBP (equiv $65 US). Eg Netgear WN3000RP or WN2000RPT. But they mention extending the range of an existing wireless network?
View 2 Replies View RelatedI use a Netgear FS605 Ethernet Switch to connect a wifi modem to my network and thus to the internet. People in that room can jump online via the wifi modem. You can also print to the wireless printer in that room via that wifi modem being local. However, I can no longer print to the wifi printer from anywhere else in my network (I could before I got a new router and wifi modem in there).Would this be a problem with this Switch or with the modem e.g.
View 1 Replies View RelatedI'm trying to set up a system where a lecturer can sit at home and give his (video and audio) class across the street via an ethernet cable strung across the street. The only problem is he has a mac, and we in the class running it aren't going to leave our PCs for macs!Is there any simple way to connect the mac to PC (without running through a router, as it slows down the system)?If so, what programs will work best for both PC and mac for streaming the video (and are free)[BTW I don't think a 100m cable is too long for the signal.
View 2 Replies View Related
