Banning MAC Addresses On Netgear DGN2200?

Feb 2, 2012

I want to ban a Mac address on this wireless router. [URL]... I haven't really done much in the gateway besides changing password and SSD.

View 4 Replies


ADVERTISEMENT

Netgear Dgn2200 Losing Connection?

Aug 25, 2012

I currently have a Netgear dgn2200 n300 wireless router (acts as a modem, you know all in one thing), and I have configured the settings on it so I can have an open nat type/port forwarded for gaming and so on. I have my xbox and the desktop connected to it via ethernet and my ipod and laptop connected wireless.

The problem is that the internet just drops out for a couple of mins every hour or so whether I or whoever is on it or not. I have tried changing the cables and filter for the phone line but nothing has seemed to work. Occasionally when the internet drops out it doesn't come back on so I have to unplug the router and so on to get it to work.

It's just starting to get annoying getting disconnected so often especially when the router cost like $200 and is supposed to be good for gaming and stuff, and I can't seem to find out why or isolate the problem. My internet download speed is fairly quick (I can get 1.5mb/s say when downloading a movie/hd youtube) and I get 70 GB a month.

View 5 Replies View Related

Losing Internet Connection Netgear DGN2200?

Jul 9, 2012

I have a Netgear DGN2200 router/modem and have been having this problem for a while now. Every so often the internet will cut out for roughly 30-60 seconds. There doesn't seem to be any pattern to the connection losses and they can happen at any time in the day (overall it seems to occur every hour and a half, although it can vary). When the internet connection is lost, the little "!" triangle appears at the bottom right. I still have wireless access to the router itself. It also occurs on both my wired computer and the wireless computer. On the Netgear itself, the internet light will either flash rapidly green, or sometimes turn red for a short while. The Netgear is plugged via a splitter into the telephone socket. the old neatgear we had did the exact same thing before it finally died and no longer worked at all. Hence why we replaced it with this one. I also rang AOL about the problem, who said that there may be a problem with the line and that we should ring BT about it. We had the line checked and apparently the line was fine and was not the cause of the problem. Things I have tried include changing the router channel and I have tried changing the splitter in case that was faulty. Do you think it could be a DSL problem on AOL's end? It's possible that the drops coincided with a free upgrade they gave us for faster internet, although time-wise I'm not entirely sure.

View 6 Replies View Related

Netgear Dgn2200 Router Configuration / Disconnecting

Sep 9, 2012

I am having trouble with my modem/router the netgear dgn2200 n300. I bought it to replace my older netgear modem/router (same model v2 to v3).The problem is I just keep getting disconnected say every hour or so when I am using the internet and sometimes it can disconnect me 2-3 times in half an hour. I have removed the filter/splitter and plugged the dsl cord from the netgear straight into the wall bypassing the filter and I still get disconnected.When I am online I receive great connectivity and I consider the bandwidth to be just fine for my needs.My question is what do I have to do in the settings of the router or in my internet properties for it to stop disconnecting me as it gets frustrating. I will take any advice except for "get a new router" or "do an isolation test" blah. Simply because 1. It happened with my old router and with my netcomm modem. 2. I have already done an isolation test and somethings not configured properly I think so, I am no networking wizard.

View 14 Replies View Related

Netgear DGN2200 - Desktop Won't Connect To Laptop?

Nov 19, 2012

I have a desktop and a laptop connected to one router, my desktop is connected via ethernet wire and my laptop is connected via wireless.

Here's the problem, on my desktop under "Network" in the Windows Explorer, I can see my laptop's name as well as my desktop's name. But when I want to go into my laptop it says "Windows cannot access \<laptop name>".

But, if I go onto my laptop and do the same thing, it works perfectly, no errors, no problems. Both of them have their IPs automatically assigned as well as the DNS server address. Both have File Sharing enabled and both have Network Discovery enabled.

My desktop has Windows 7 64-bit and my laptop has Windows 8 Pro 64-bit. I have tried disabling both firewalls, no luck. I used to be able to connect to my laptop, but now I can't. But I can connect to my desktop through my laptop. My router is a NETGEAR DGN2200

View 3 Replies View Related

Netgear DGN2200 - Pc Wont Recognise Ethernet Cable

Apr 29, 2012

I am trying to connect a 2nd PC to my Netgear Router DGN2200. The first PC is working normally with full internet capability. I have tried connecting the second with an Ethernet cable but it wont recognise it .

View 7 Replies View Related

Routers / Switches :: Port Forward With A Netgear DGN2200 V3?

Oct 9, 2012

I cant work out how to get my Netgear DGN2200v3 to port forward.Portforward.com describes how to port forward for a Netgear DGN2200 but NOT for the DGN2200v3.The difference between the DGN2200 and the DGN2200v3 is that when I log into the router and go to port forwarding/port triggering there is no box to fill in the server IP address. It just says service name, service type, starting port, ending port.

View 1 Replies View Related

Netgear Dgn2200 Unable To Change Idle Timeout?

Oct 30, 2012

Modem is a Netgear dgn2200

On the modem page with all the settings Under basic settings For connection it says Always Connected The box underneath says idle timeout 5 (that's in minutes)

I am unable to change that number or even get a cursor to appear in that box (I want to change it to a 0 - my internet connection has been dropping out when going idle). I can't right click or anything. That is using Firefox. When I say dropping out, I mean, the 3 computers on the network become unuseable - nothing works and things don't appear to be connected to the internet even though my green ADSL light stays on like it's connected - it is not.

I tried the same modem page in IE, and that box with the 5 in it is still showing 5, but this time it's just grayed out - again, can't be changed. The firmware updates are all upto date (apparently - according to it's check)

View 1 Replies View Related

DGN2200 - Connecting Netgear Modem With DLink Router?

Dec 24, 2011

how can i connect a Net gear DGN2200 wireless modem router to a D link DGL4500 wireless router ??

View 1 Replies View Related

Netgear DGN2200 Ethernet External Hard Drive

Apr 2, 2012

I have a netgear DGN2200 router with a USB port built in. I also have a WD External Hard drive, When using the hard drive plugged directly into my laptop I get transfer speeds of roughly 20 mb/s,However when I plug the hard drive into the router and transfer wireless i only get 1.2 mb/s.Also I'm looking to get a USB > Ethernet adapter, would this increase transfer speeds wirelessly?If not how do I go about increase transfer speeds?

View 6 Replies View Related

Netgear N300 (DGN2200) Connection - Internet Port Had No Ip Address?

Dec 16, 2011

I recently purchased the netgear n300 ADSL2+ modem router. I have tried all day to get it to work, but I have not have any success.

ISP: Verizon (Now frontier I think)

DSL light will be solid green, along with the port, wifi, etc... But the internet one stays solid red.I've tried changing dns settings and things, but to no avail. Though I am able to login to the router, and I can get internet if I directly connect to the modem.

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersRobert>ipconfig/all
Windows IP Configuration

Host Name . . . . . . . . . . . . : Robert-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....

I noticed in the router settings that the internet port had no ip address, as in it was just 0.0.0.0.

View 19 Replies View Related

Netgear DGN2200 Won't Check For Firmware Upgrade - No Connection To Internet?

Dec 20, 2012

My Netgear DGN2200 (Name NetgearCS) won't check for firmware upgrade because it says no connection to internet so unable to connect to the Netgear Servers - Yet this laptop I am currently using (wireless connection is turned off on laptop but not router) is wire connected to this same Netgear router and I have internet connection because I am able to post this enquiry. Note the Netgear DGN2200 router gets its internet connection from my Sky Router and is connected by wire to this Sky Router. FYI my iPhone is connected wirelessly to this Netgear DGN200 router (NetgearCS) and is able to connect to the internet. Do you know why my Netgear DGN2200 cannot check for firmware updates?

View 1 Replies View Related

Setting Web / FTP Home Server With Netgear DGN2200 And Zyxel USG100 With Firewall

Jun 15, 2013

I want to public to the internet a web + ftp server, all running in the same machine that now is a performance pc, in the future will be a qnap nas ts-220. I don't need extreme performance so my ISP gives me only 12 Mb down and 0,8 Mb up. I will use the nas as download station, ftp server and a web server when I'll public a personal site.

this is the config:

-modem/router adsl2+ that connects to the internet. ISP gives me dynamic ip! it has 192.168.0.1 ip and I think it cannot be changed.

-a firewall hardware zyxel usg 100 with all active UTM services. it has default ip 192.168.1.1. the netgear in the "attached devices" see the zyxel as 192.168.0.2, the same ip zyxel says to the wan1 port.

-a pc or, in the future, a nas that now has automatically assigned ip 192.168.1.34.

I must use a free or paied service as dyndns or something else. If the solution to retrieve everytime the dynamic ip is to set the ddns only in the router/modem netgear then it can only use dyndns.org or .com or .it with the dns of the associated ddns service. For example: if I set a dyndns.it account in the netgear I must set also the dns provided by dyndns.it because if I set google dns or something else the service cannot work.At the moment I tested only with a filezilla server running on the pc directly connected to the netgear, no zyxel in this test.

The config is:

netgear with ddns service provided by dyndns.it, activated with the username and password, in the wan I setup the dmz as 192.168.0.2, in the adsl settings setup the dyndns.it IPs. in the services of the netgear also provided a custom service with ports from 60000 to 60050 and created two rules one for outbound and one for inbound where I let data pass from the wan to the server in the lan 192.168.0.2.

filezilla running on the pc with windows 7 x64 with lan ip 192.168.0.2 mask 255.255.255.0 as th3 netgear and gateway of course the netgear 192.168.0.1. dns servers same as provided by dyndns.it. filezilla configured with only one anonym user without password for testing, default listening port is 60000, passive mode active with range 60000-60050 and for retrieving IP I set default, no Dyndns.it host cause it will not work.

So configured it works fine!problem is when I connect the zyxel between the netgear and the server.how change the default ip of zyxel? in configuration - ethernet - lan port is correct to set there the default and static ip to 192.168.0.3? there are many options! same as dmz you can set there the static ip and what ip?also when you want to public a server zyxel don't say nothing about port-forwarding. it says only create two address objects one with ip of the netgear and one with the ip of the dmz port then create a rule in the firewall section where you set wan to dmz and destination and origin ip selecting the two address objects previously created then you are ok...no, really no! and the ip of the firewall rules in the netgear? which ip do you must set? 192.168.0.2? or 192.168.0.5 if you set it up in the dmz port of the zyxel? no, it is a conflict so you must set another ip.to set correctly the server to be visible in the internet with the netgear + zyxel usg 100?

View 5 Replies View Related

Can't Connect To Internet After D-banning

Apr 18, 2011

My pc won't connect to the internet after I d-banned it and reinstalled windows 7? It has all the proper drivers working but it just won't identify. I've reinstalled windows before and never had this problem on this machine but I never used DBAN on it before. I even connected it directly to the modem and no go. Windows diagnostics says Local Area Connection doesn't have a valid IP configuration. Can't connect to internet after Dban'ing

View 15 Replies View Related

Netgear N600 How To See All IP Addresses On Network

May 23, 2012

I have a home network with a Netgear N600 as my main router. I have a wirelesss HP printer that accesses fine as does Iphones and Ipad. Then I have hard wires. Off of the main router I have 3 Netgear 5 port switches. 1 switch with a line to bedroom tv and a line to family room tv. 1 Switch at family room TV which goes to Blu Ray, Direct Tv, and Xbox360. 1 switch at bedroom for Blu Ray and Direct TV. Believe it or not, this all worked. I tried to hook up a ZmodoH264 security system (the ones with four cameras, and a separate hard drive and monitor for viewing). I used one of the 4 inputs on the main Netgear router for this, and it seemed to be recognized. But, I can't access the security system mobilly, AND all my network addresses seem to have been screwed as Directv isn't working (Whole Home) and the printer stopped being recognized. However, Blu Rays are still fine. Is there a way with ipconfig to list all of my hard wired nodes? I assume wireless dont show up in a list.

View 4 Replies View Related

Banning Mac Address On Thomson TG782T?

Oct 22, 2011

The problem i'm having is that i'm using a 100gb capped internet plan, but after 1-2 weeks it gets all used up. After checking to see who's accessing the internet there's 2 unknown mac addresses who are constantly accessing the internet. Whenever this happens, the internet becomes considerably slower (i'm guessing they're torrenting or downloading off our internet).

I've even tried changing the wpa password but they're somehow still accessing the internet. So i've been looking for a way to ban mac adresses but i can't seem to find the option on the router.

Here's a screenshot:

YES, i know there's an option that says "Allowed on WLAN", but i cannot un-check the box for some stupid reason.

I really don't know what to do! Is there some kind of command i can type in the command prompt or something to ban mac address manually?

View 5 Replies View Related

Netgear FVX538 / Setup Multiple Public IP Addresses In Network

Aug 9, 2011

I have a Netgear ProSafe VPN Firewall FVX538. But I also have 10 Public IP Addresses that I will like to setup for three web services. So how do I set this up. With multiple routers. Or can my Netgear FVX538 take multiple Public IP Addresses to the same ports. If not how can setup multiple routers. one being the main one.

View 1 Replies View Related

Cisco Routers :: RV042 When Updating / Adding Mac Addresses / Table Is Always Sorted By IP Addresses

Oct 8, 2012

In  setup for old RV042 (V1),  when updating / adding Mac addresses, the table  is always sorted by IP addresses. But in the new oneRV042 (V3) I have, even with latest firmware 4.2.1.02  the list  is random, thereby increasing the chance of user entering DUPLICATE IP addr  with diff Mac addr.  That will result in conflict.If the firmware sorts the DHCP entries by ip addresses, user would be  able to catch duplicate ip errors even if the system does not flag the  errors.  All Cisco smart engineers can you all get the dhcp entries SORT by  ip addresses.

View 2 Replies View Related

LAN Cannot Get IP Addresses?

Mar 15, 2012

On my desk top home computer (XP Home Edition) connected directly to High speed Internet modem/router with a ethernet cable :The modem/computer connection worked for many months. Recenttly, I had to re-install my Network Driver because of a virus problem. The LAN icon now says :"Status: Acquiring Network Address" but it never gets to a connected status. IPconfig/all shows all 0.0.0.0 I have another laptop (Windows 7) using same network/modem thru wifi WLAN mini card and it connects fine to the Internet. IP values[CODE]

View 1 Replies View Related

Running Out Of IP Addresses

Mar 4, 2011

Our company is a small one and steadily growing towards mid size. We currently have about 200 or so users. Naturally we have run out of IP addresses and now we must redesign the entire IP schema.Initially our plan was to just implement a class B subnet for the whole network with certain ranges belonging to certain kinds of devices/machines/servers.Are there any cons to this? If so, could you link me to documentation that explains this?

View 4 Replies View Related

Same MAC Addresses In Different Subnets?

Nov 20, 2012

I have an exercise with picture you find below. The question is: Will the network shown in the diagram work correctly when you consider that the MAC-addresses PC0 and PC8 are the same, and why?

View 1 Replies View Related

2 Different IP Addresses For One Client?

Jan 20, 2012

I am in charge of a network that has two dns servers with directorys, one main and one for back up. I also have a cisco firewall.When I run a scan on my network, the scan results return clients that have two diffent IP addresses for one client or server etc.

View 1 Replies View Related

D-Link DIR-615 :: Can't See Some MAC Addresses

Jun 27, 2011

I have a DIR-615 rev C1 with the latest firmware (v3.13).  I am trying to reserve all the IP addresses in my home network, which includes a printer, 3 computers, a network bridge to a PS3, the PS3 itself, an iPhone, and an A/V receiver.  On my network setup page, I can see the MAC addresses under DHCP CLIENTS for the wired Win7 computer, a Win7 computer with a USB adapter, the PS3, the network bridge to the PS3, the iPhone.  

[code]...

View 13 Replies View Related

Possible To Have Public IP To More Internal Addresses?

Oct 24, 2011

Is it possible to have more public addresses to more internal addressees? I have an internet provider which is in control of my router and he is telling me it is not possible. It's a Cisco router and I have static IP address.

View 1 Replies View Related

Allocating IP Addresses To Network?

Aug 20, 2012

I'm planning to setup a network with more than 300 PCs. I know that using class C address is not enough to allocate number of IP addresses required. What I meant in the preceding sentence is that If I use this network address 192.168.1.0 (class C), it will allow only 256-2 = 254 IP addresses, What about other PCs in the network ?

View 3 Replies View Related

Recover Lost IP Addresses And DNS?

Sep 3, 2012

lost ip addresses and also says dns problems .how do i recover the addresses so i can connect to the internet

View 2 Replies View Related

Cisco :: Many MAC Addresses On Same Port?

May 25, 2012

We got a bunch of port-sec violations on port fa1/0/42. after checking logs, we noticed that the MAC address responsible for generating the alert was not one, but many.We asked the user, he said he only restarted his computer.The MAC addresses happen to be existing MAC on the network.How is it possible that a port-sec violation is made by many MAC addresses on the same port, successively?

Syslog message generated from device SW_Etage1: May 25 15:17:08 10.100.254.11 1454802: May 25 15:19:11.693 CET: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 6416.8dbb.930e on port FastEthernet1/0/42.
Syslog message generated from device SW_Etage1: May 25 15:17:29 10.100.254.11 1454805: May 25 15:19:32.874 CET: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 78e3.b58f.1011 on port FastEthernet1/0/42.

[code]....

View 11 Replies View Related

Cisco :: No Addresses Available For SVC Connection

Apr 21, 2013

When I try connecting via anyconnect the logs (and anyconnect messages) state the connection "cannot be established due to no addresses being available for SVC connection'". The group etc has a dhcp scope assigned, (and this was working for the past year). I'm not sure what config changes (if any) he made before leaving.

View 10 Replies View Related

Keeping Internal IP Addresses The Same?

Jan 23, 2012

I have multiple devices running on my home network. Every once in a while my wireless router starts playing up and I have to reset it.Whenever this happens, it changes the internal IP addresses of the devices. Is there a way to make the router keep the same internal ip address for each device? ie Laptop stays at 192.168.1.8I have a few forwarded ports for remote access to certain pieces of software, so each time the address changes, I have to go in and change these details, which is quite frustrating.

View 7 Replies View Related

Dividing The Block Of Ip Addresses

Mar 27, 2011

Here is the question,"If an ISP purchased the following block of IP addresses: 200.23.16.0/20, describe and/or diagram how they would be able to divide this block of IP adresses into 8 subnets for resale. What are the number of hosts for each subnet?"

View 12 Replies View Related

Two Separate IP Addresses For Same House?

Jun 22, 2011

Me and my girl friend both work from home doing freelance work using the internet. The company we do freelance work for allows one agent per ip address and checks the ip address for multiple agents I guess.I only have one modem, router, and two computers, but I believe they are on the same ip address.Is there a way to have two different ip addresses so we wouldn't have any issues with our work here?

View 19 Replies View Related

How To Avoid Getting Ip Addresses From Linksys

May 25, 2011

How would I connect hopes to router without getting ip addresses from linksys router , rather i want to get ip addresses from Server 2008 that can be done by DHCP server, in that case how would i disable ip addresses getting from linksys router? each time I connect new hopes to network those pcs should get ip address from Server how it can be possible.

View 4 Replies View Related

How To Switch Between 5 New Static IP Addresses

Apr 28, 2013

how to switch between my 5 new static IP addresses that I purchased (on a monthly basis now) from my ISP. I need them for my business so that I can send out more than the 1,000 emails per day from the one IP address to all of my customers which total a little over 1,500 now. Unfortunately I'm quite computer iliterate when it comes to understanding even the basics of computer terminology, etc. My ISP explained to me that if I purchased the bundle of 5 static IPs, then I could in essence send out 5,000 emails per day, which is plenty.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved