Recover Lost IP Addresses And DNS?
Sep 3, 2012lost ip addresses and also says dns problems .how do i recover the addresses so i can connect to the internet
View 2 Replieslost ip addresses and also says dns problems .how do i recover the addresses so i can connect to the internet
View 2 Repliesneed to recover lost password
View 1 Replies View RelatedI lost my router 192.168.1.1 password and how to recover?
View 3 Replies View RelatedI was upgrading the OS [c:] on a DELL Poweredge 840 server from Win2k3 server to Win2k8 R2 server using the Dell SMTD DVD to prep the install. This has always worked in the past without destroying the data partitions. (I have now found out this only works properly if the OS is on a RAID 1/0/10 and the data on a RAID 5)
In this case the OS & Data were both on RAID 5 & the Dell tool reformatted (quickly) or maybe reset the partition table so that it looks like one big drive. I noticed this once I got to the install screen for Windows 2008 R2 and shut down the system.
Are there any utilities that can be run from a bootable CD/DVD that can undo the format on the RAID 5 set or else let me browse & recover the data on the various partitions?
In setup for old RV042 (V1), when updating / adding Mac addresses, the table is always sorted by IP addresses. But in the new oneRV042 (V3) I have, even with latest firmware 4.2.1.02 the list is random, thereby increasing the chance of user entering DUPLICATE IP addr with diff Mac addr. That will result in conflict.If the firmware sorts the DHCP entries by ip addresses, user would be able to catch duplicate ip errors even if the system does not flag the errors. All Cisco smart engineers can you all get the dhcp entries SORT by ip addresses.
View 2 Replies View RelatedRecover a deleted Message
View 1 Replies View Relatednetwork Password is rejected as wrong in trying to add another appliance to it. Please confirm the password you have on file
View 1 Replies View RelatedI recently bought a Linksys E1200 router. During the set-up, while setting security up, we stupidly by-passed right by the WEP key it generated. This then booted us off the connection since we changed it, and since we didn't get the WEP key, we no longer can enter it in and connect to it. We tried entering in the default IP using another connection but it will not work.
View 6 Replies View RelatedAt the present moment seems I received internet signal in my portatil, but I think is a fake signal from the router because of the previous configuration. The Modem Cable is Scientific Atlanta 2100.
View 4 Replies View Relatedjust tried to log onto my hotmail account and it come up with a notice that its blocked. did all that hotmail said but it still won't recover
View 1 Replies View RelatedI couldn't recover my password so I just created a new account.I just recently bought the ASUS RT-N16 since I switched to a different ISP that provided only a modem.
The problem: Some computers in the house will connect no problem to the network and without trouble. Other computers will be able to connect to the network but it will be restricted. When you go to the internet browser it shows an Asus logo and says: "the cable for ethernet is not plugged in". All the computers are wireless and in fact I am writing this while connected to the RT-N16 (wirelessly). Also, sometimes a computer will boot, I will go into the browser, it will show me that message, I unplug the RT-N16, plug it back in and the internet works again. This happens everyday.
P.S. I would also like to note that I tried connecting to the internet network with a nexus and it showed me the same error while I tried connecting with a samsung galaxy S2 and everything worked just fine. Also we got like 5 computers at home and I'd say 1 computer always connects fine, some don't connect regardless of whether you restart the router or not and some computers work only when you restart the router so I have very mixed feelings about this one...
I have a Linksys wireless router, model WRT160N. My wife got a NUK for Christmas and I can't remember the password to include the NUK in my system. I called support and after sitting on hold for 1/2 hour the tech came on and told me for $29.99 I could get my password reset. Is there a way I could retrieve the password myself so I can avoid spending the money?
View 7 Replies View RelatedI have a former corporate PC that logged into a domain server. Under <Control Panel><System> I changed from Domain to Workgroup. I now can't log on to any account including the administrator.I don't have the recovery disk. MS suggests a parallel installation of XP to provide access to the files on the disk. I can do that with any Linux CD. I don't have any data I want to recover. That was all stripped off before I got the PC. I do want to keep all the applications. If I reinstall XP, I will loose all the applications. I now know I can only logon to the administrator account if the PC is connected to the domain server. If I can restore the domain name, I can log on to the PC again.Where is the domain / group info kept and in what format?Is there a way of using a Linux CD to manually edit the XP files to restore / add a domain??
View 2 Replies View RelatedI'm using Windows 7 Ultimate. Now I created a Wireless Network from my Router, but I forgot the password. It is WEP encryption. The only way I can connect to the wireless network is if I disable the security in my router config.
View 4 Replies View RelatedHow do I recover my wireless network password?
View 1 Replies View RelatedI deleted a few e-mails how can i recover them?
View 1 Replies View RelatedI'm unable to use system recovery back to the default settings as the computer shuts down sometimes 2mins left and sometimes 6mins left?
View 1 Replies View RelatedHow do I recover my wireless network password?
View 1 Replies View RelatedI would like to recover or change my security key for my wireless network Nexxt_018c40
View 1 Replies View RelatedI need to know if there is a password recovery procedure on a switch ESW 520
View 2 Replies View RelatedWLC 2006 lost the ios,and started with grub> prompt,what can i do to recovery the ios??
View 12 Replies View RelatedI have a new ISR 1900 router on which i accidently deleted the default username and password and now i am unable to get in to router console. Also i am unable to break in to Rommon mode as well.
View 2 Replies View RelatedTried up dd-wrt firmware few days back, I do really like it, but I do noticed my DIR-615 E4 Ethernet doesn't like my motherboard bundled Gbps Ethernet with dd-wrt firmware, and it's really un-stable, the link always up and down (Windows always report Ethernet link-disconnected!). So, I tried so hard to get into emergency page with IE8, Firefox with no success, the only browser can get into it is Google Chrome, but file-upload with Chrome always stuck!!! anyway, I found the SOLUTION!
**make sure you have the original firmware from DLink before you started the following procedure**
1. create a html file (dlink-recovery.html) with those following code (I got it dumped from Chrome! I've added "http://192.168.0.1" to form action)
<html>
<HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
</head><body><form action="http://192.168.0.1/cgi/index" enctype="multipart/form-data" method=post>
<center><p><font color=blue face=Courier New, Courier, mono size=3><b> <font color="#FFFFFF" face="Courier New, Courier, mono">--
<font color="#0000FF">D-LINK</font></font><font face="Courier New, Courier, mono">Firmware Upgrade System </font></b></font></p><p><font color=blue face=Courier New, Courier, mono size=3><b>
[code]...
2. change your PC network adapter configuration "Media Type" to 10mbps full duplex in network adapter configuration->advance settings (hope you know where!)
3. change your PC network IP to 192.168.0.* (any number except 1!)
4. unplug the power from DIR-615, then press-and-hold the reset button while plugging the power back to DIR-615, hold the reset button until the power led-flashing!
5. use firefox to open the dlink-recovery.html which created from step-1, browse the original-firmware and submit. if success upload, you'll able to see the 'flashing' page with percentage counting up.
i have two laptops .... a month ago i have bought second 1........ the problem is that on first laptop i can easily use internet via wifi......... but on the new it asks for security key ..... and i dont know security key ........ so how can i recover my security key...............?
View 1 Replies View Relatedmy wireless connection gets lost intermitently. How can i fix this problem without paying too much to the service providers.
View 2 Replies View RelatedMy Vaio's screen is dead due to a dead graphic card (long/short/short beeps when starting up). But i can't easily remove the harddisks and connect them through an external USB-SATA because they are in raid 0 configuration..The laptop still works (i hear the windows 7-soundlogo) but I can't get access to it since i cannot see what i am doing for installing eg VNC or Remote Desktop software. Command line commands? try portable VNC installations? remove harddisks and bring them to a recovery centre?
View 1 Replies View Relatedchecked all the recovery doc, however, there is no one specific for 3900 series router
View 2 Replies View RelatedI didn't change the one-time password in ISR 2911 and I can't access the CLI or the ROMMON mode
View 10 Replies View Relatedshare the prcoedure to recover password in IPS 4260?
View 1 Replies View RelatedWhat procedure to recover the password on the router 9013.
View 1 Replies View RelatedPassword recovery switch 2960 that what I am doing and I get fail sll the time?
switch: flash_initInitializing Flash...flashfs[0]: 0 files, 1 directoriesflashfs[0]: 0 orphaned files, 0 orphaned directoriesflashfs[0]: Total bytes: 32514048flashfs[0]: Bytes used: 1024flashfs[0]: Bytes available: 32513024flashfs[0]: flashfs fsck took 9 seconds....done Initializing Flash.Boot Sector Filesystem (bs) installed, fsid: 3Setting console baud rate to 9600.(code)
l have my term server 2511 and l was tryng to recovery the password but at the rommon mode, l cannot have any access even when l do confreg 0x2142
He brings me tho this: transaction "CONFREG' domaine server (172.16.15.30) (172.44.244.10) (172.244.15.17).
What those this mean. l when to all process still cannot do this.
How can I recover deleted read inbox messages?
View 1 Replies View Related