How To Recover Data From RAID0 And Dead Screen
Oct 11, 2012
My Vaio's screen is dead due to a dead graphic card (long/short/short beeps when starting up). But i can't easily remove the harddisks and connect them through an external USB-SATA because they are in raid 0 configuration..The laptop still works (i hear the windows 7-soundlogo) but I can't get access to it since i cannot see what i am doing for installing eg VNC or Remote Desktop software. Command line commands? try portable VNC installations? remove harddisks and bring them to a recovery centre?
View 1 Replies
ADVERTISEMENT
Jan 18, 2012
I was upgrading the OS [c:] on a DELL Poweredge 840 server from Win2k3 server to Win2k8 R2 server using the Dell SMTD DVD to prep the install. This has always worked in the past without destroying the data partitions. (I have now found out this only works properly if the OS is on a RAID 1/0/10 and the data on a RAID 5)
In this case the OS & Data were both on RAID 5 & the Dell tool reformatted (quickly) or maybe reset the partition table so that it looks like one big drive. I noticed this once I got to the install screen for Windows 2008 R2 and shut down the system.
Are there any utilities that can be run from a bootable CD/DVD that can undo the format on the RAID 5 set or else let me browse & recover the data on the various partitions?
View 9 Replies
View Related
Feb 17, 2013
Do larger computer screens use more data? Or is it just a matter of screen resolution?
Is there a difference between large, small, laptops, and tablets in bandwidth consumption if all the screens were set to a resolution of 1024 x768?
View 11 Replies
View Related
Jul 5, 2012
Is it possible my Laptop Ethernet port is dead?After I got home today I noticed that the store that passed by caused a short power outage. I knew this because several electronic devices that rely on constant power were reset.Next to be noticed was that my computer had no connection to the internet, and my Ethernet port has a constant orange light on.I proceeded to perform a full network restart for my modem, router, and computer. This solved the internet connection to my router. My roommate was able to connect via an Ethernet cable to the internet on any of the routers ports, but I was still unable.However,I was able to connect to the wireless on my computer. Unfortunately no matter what port, or cable I use my Ethernet port still is unresponsive to it all, and still has the constant orange light.you.Specs:Manufacturer: Gateway
Model: P-78
OS: Windows 7
CPU/Ram: Intel(R) Core(TM) 2 Duo P7350 2 GHz / 4090 MB
Video Card: NVIDIA GeForce 9800M GTS
Sound Card: NVIDIA High Definition Audio Conexant High Definition SmartAudio 221
View 9 Replies
View Related
Dec 10, 2012
So I rebooted my router after adding a MAC address to the MAC address filtering scheme, and now it wont get its static IP and broadcast. what have I done and how can I fix it? and before someone says "Turn it off and on again" and "hard reset it", ive done this! it was first port of call!
View 3 Replies
View Related
Apr 29, 2011
Just for no reason that I know of the wireless stopped working. I can can connect to the SSID fine and there seems to be good signal strength, but no wireless internet access.
I have up to date February 15, 2011 firmware, 205NA, hardware version = B1.I have done a reset with no luck.I have done a 30/30/30 factory reset = no luck
View 8 Replies
View Related
Feb 23, 2013
My laptop's keyboard just dead and I can't no longer activate it wifi.My laptop is Toshiba and it usually use fn+f8 key to activate, but since my keyboard got broken yesterday,I don't really know how to activate it.
View 2 Replies
View Related
Mar 4, 2011
Model: Linksys CM100 Cable Modem, purchased December 2010
Modem goes dead immediately after 3rd light goes solid. All lights go out and the modem stops functioning completely. Using the reset button gives no response, the modem stays dead. Upon unplugging and plugging it back in, the modem turns back on and cycles through the lights, only to die out once again.I was initially able to get it to stay alive by starting it with the Ethernet cable disconnected then plugging it in once the modem had connected, which I found odd. After a relatively short period, say 20 minutes, the modem would randomly die out again. However even that has since stopped working.
View 1 Replies
View Related
Jun 13, 2012
Have to re-boot 1-2x daily. Updated firmware through Cisco, followed by about 7-8 support calls. They all recommend some sales thing, new router, computer update and clean-up, or blame it on my modem (not the case). When E1500 goes down, all wired and wireless connections are lost. They all recommend some sales thing, new router, computer update and clean-up, or blame it on my modem (not the case).
View 4 Replies
View Related
Oct 22, 2011
I have a simple question regarding dead peer detection on the ASA 5520. I am using a cellular VPN device to connect back to an ASA 5520 and I have noticed that the connection drops at random periods during the day. The vendor for the cellular device recommends disabling dead peer detection on their device, which I have done. The question is, where is this disabled on the ASA? is it the IKE Keepalive setting under the tunnel group option?
View 1 Replies
View Related
Jun 22, 2012
I tried to upgrade the cisco boorloader pf WLC 4402 from version 4 to 7.2. I updated ER.Aes FOR 7.2 (EARLY RELEASE.aes). It was updated perfectly and then I rebooted controller....now i can only see blank screen from connected console.I tried the flash of other lan controller but its not working because the issue is in the ROM as the boadloader file is in the ROM which is corrupted now i want the solution to upgrade the boatloader file inside the ROM.
View 1 Replies
View Related
Jul 13, 2012
I have an old RV082 that I suppose has failed. The red diag light on the front panel is lit and nothing works. I've already replaced the unit, so I don't really need to fix it. Here's my issue: the setup on the old unit was pretty complex with a number of port forwards and other non-default settings. I'd like to recreate those items on my new router, but they were never written down so I don't know what they were. I've tried to connect a computer to one of the LAN ports, but they're all dead. Is there any way to get at the configuration page?
View 2 Replies
View Related
Feb 16, 2012
I just got a refurbished ASA 5505.It works fine until un need to reload it or unplug it from power en replug it, when I do this and it's warm (even after some minutes of uses, so still physicaly cold while touching it), in this case, it simply reboot in chain withing 1 or 2 seconds. I have to unplug it from power and wait 5 minutes before replugging it to power.
I don't know if it's a problem from the power supply (that makes some noise, but I think it's normal), I tried loading more the power supply by plugin in some PoE device (Cisco 7940G) and it works fine, so it looks more like it's a problem on the ASA itself.
Must I send it back to the vendor? I tried updating the ASA image, but this don't changes anything.
View 2 Replies
View Related
Oct 1, 2012
I upgraded my E2500 with the last version of firmware but now is dead. the power led is turn on, but the ping are discontinued. the other problem is that after 10/15 sec, the router will restart automatically. i try with tftp but after the reset of router does not change anything.
View 5 Replies
View Related
Apr 4, 2011
My router appears dead. I assume that I need to reset it and replace the firmware.
View 3 Replies
View Related
Feb 9, 2013
How do I troubleshoot to find out if my wireless router is dead? I have a WRT160N. It's been giving me problems lately, so I thought I'd update the firmware. Long story short, I had to reset it, but I still can't get into it. I have gotten into it, but when I try to save it gets hung and then I reload and then it starts all over again.It does work hard- wired--I can access the internet with ethernet. But I can't get the dang thing reset and then upgrade the firmware...
Somehow I set this router up to act essentially as a repeater, an extension of the wireless network that is "anchored" (not the right word I'm sure) by the wireless router provided to me by my DSL provider. I want to do the same thing once I get this one working again--set it up as an extension of the existing network so I can essentially walk around the house with my iPad and not have to re-log in when passing into a new "zone".
View 9 Replies
View Related
Jul 3, 2012
After replacing my WRVS4400N Gen2 with a RV220W, I would like to know if there is a solution to resurrect the dead wlan, killed by the well known buggy firmware some time ago (I could not let it fix it in those days, cause some of use may need those devices every day, so "send it in and we fix it in some weeks" was a bad joke).
I do not need the "old" router atm, but it would be nice to have a backup device in hands, because the VPNs created by those devices are vital for my business. Is there a cheap way to fix this device, or would you say it would be cheaper to buy something else? (And after those two devices, I'm not sure that the next one would be a Cisco device again .
View 1 Replies
View Related
Sep 13, 2011
I have remote site in which site to site vpn is configured with hub site using 5510 model. now i am using load balancer in which 2 isp will terminate one is isfy and other is reliance . now i want if suppose ipsec-tunnel is configured primary with sify. if sify link fail at hub site then at remote site should be able to communicate with reliance that is secondary?
View 7 Replies
View Related
Jul 25, 2012
In a lab environment, I have a stack of two 3750v2-48ts switches. I upgraded the stack from 15.0(1)SE2 to 15.0(1)SE3 using archive download-sw.
Switch 1 in the stack reloaded and came back with the new image.
Switch 2 appears to be dead. No console out put. When power is applied, the SYST LED blinks 22 times, then stops. I've held in the mode button for up to 60 seconds, held in mode while applying power, removed the stack cables and repeated...there's not a whole lot else I can think of to do at this point.
View 1 Replies
View Related
Jan 25, 2011
MY ISP is AT&T. I have their Westell DSL modem, with a bridged connection to a Linksys wireless router. The router is connected via ethernet to a dead computer: a 7 year-old Dell desktop that will boot up but shut down right away. I have been able to connect multiple laptops wirelessly to this network. I thought an ethernet connection was required in a home network such as mine? The cable has been plugged into a dead computer for several months and frankly I'd like to get rid of the desktop. What exactly is the ethernet requirement - just to be plugged into a port? Could I theoretically just yank the ethernet card out of the desktop and use it instead of the whole dead system?
View 5 Replies
View Related
Aug 20, 2011
I've got an IPTV network with Bell FibeTV with Motorola VIP1216 (the DVR master) and VIP1200 (slave) cable boxes. All the coax cables in my walls form a wired ethernet network instead of a cable TV network. To get better wireless coverage in my home, I've set up routers as wireless access points at each of the cable boxes. Essentially I've plugged the router into the ethernet bridge of the cable boxes, and disabled DHCP and gave it a static IP and did all things I needed to do to disable all the routing capabilities and make it into a switch (here's what I did, step by step: [url...]). So when I go from one room to another, I just select a new wireless access point to get maximum signal strength and speed.
View 6 Replies
View Related
Jul 28, 2012
It has happen suddenly : Internet is not working through WRT150N, though it work when directly connected to the modem. So I think it is a router issue :On the WRT150N, Internet light is flashing fast for 2 seconds, then is off for 2 seconds, then flashes, then is off and so on, wether there is a device (computer, modem, ...) plugged or not, through the blue ethernet connector.And sometimes, Internet light stays off from power on, whatever is done with ethernet connexions (yellow or blue).
When connected to the blue ethernet Internet connector, my pc ethernet lights don't blink (nor the link light or the data light)I have try the 30-30-30 reset cycle. But it doesn't improve.I have tried the loopback test : connect an ethernet cable from the one of yellow ethernet port of WRT150N to the blue ethernet of WRT150 N.Sometimes, the light for the yellow ethernet port goes on for a few seconds, while the Internet light continues to flash. After a few seconds, both go off.Sometimes, as soon as the loopback is made, the 2 lights go off, and if a computer is plugged to the yellow port, the ethernet lights of the computer and the router stays off.But I can access to WRT150N through Wifi and I can access to the web management.
View 7 Replies
View Related
Mar 26, 2012
I've bought my E4200v2 via eBay, because original Cisco store doesn't ship to my country (Israel).My first unit was... defective, I think I wrote about the issue on this forum a while ago.It had connection troubles, always in a dead loop, saying "Connecting..." one to 100 times it managed to connect, and suffered slow internet connection speed, where all speedtests gave me 60% of my actual internet speed.Which is 30mbit.I'm sure about my ISP, it uses next.gen technology, they have their own underwater optic cables. Without Cisco router, only dialer, I get 100% of my internet speed, or with another router as well.I decided to RMA my e4200v2.
Out of context question: Why there's no option to specify server name instead of server IP? our ISP uses domain name for connection, rather than IP address, as they have a lot and a load balancer above 'em.Now, to the original issue.Refund is no option, RMA again is no option, too much time and money.Maybe there is a solution? It just can't be the reality, that two out of two units are not working. I heard this router is very good. And I heard the v1 is working very well in Israel. so It can't be our country that is the problem.By the way, I've called my ISP and they've switched me to MPLS connection for a try, so in a router you just switch to "Automatic configuration - DHCP" and it pulls IP, DNS servers and connected to the internet, but was hooooribly slow.
So I'm back to dialer. the main still is the "Connecting..." loop, sometimes says "Connected" for a second, and then connecting again... It manages to pull DNS addresses though, but never the IP and never managed to stay connected.All the connection configs are very basic, you know it. Server IP, username, password, keep-alive, MTU (I've tried auto, and a ton of other combinations recommented by our ISP or Cisco).My latest idea was to film how I burn it or throw a rock at it and send to Cisco the video, but that's kinda too much, it's too early for such decisions, especially when already $300 were spent.
View 9 Replies
View Related
Apr 18, 2012
So let me start by saying that i'm stupid, as i did not 1st read the manual properly and thus upgraded my camera WIRELESS.. (when manual clearly states by cable ONLY).
Camera is now DEAD. Only red led light is flashing.
Hardreboot not working (pushing reset, then switching on camera & hold reset for 30 secs)
Is there anything else that i can do myself or is this gonna be a repair job?
View 2 Replies
View Related
Feb 15, 2012
I had an old Cisco Catalyst 2948G switch that I have not used in about 7 years down in my basement. I powered it on and went through the process of clearing out the configurations, and I got to a point where one of the commands to clear out the config asked me to install jumpers for "ROM" and "ERASE". There is a third jumper labeled "NO BOOT". They are numbered J6, J7, & J8 respectivelyI found the jumpers inside and put the jumpers on them and ran the command expecting it to remove any old configurations I had on the switch and bring it back to factory state, but I was wrong.
View 3 Replies
View Related
Dec 10, 2012
I had an old Cisco Catalyst 2948G switch that I have not used in about 7 years down in my basement. I powered it on and went through the process of clearing out the configurations, and I got to a point where one of the commands to clear out the config asked me to install jumpers for "ROM" and "ERASE". There is a third jumper labeled "NO BOOT". They are numbered J6, J7, & J8 respectivelyI found the jumpers inside and put the jumpers on them and ran the command expecting it to remove any old configurations I had on the switch and bring it back to factory state, but I was wrong. This switch runs CatOS, not IOS.When power is applied to the switch, the fans turn on as normal, but no LEDs are lit on the front. There are green LEDs lit next to the jumpers inside, but that is all. I am not able to get any response from it on the console at all anymore.The LEDs that are lit green inside are labeled "CR5" and CR6".
View 2 Replies
View Related
Feb 24, 2013
I have a Cisco 4500. Recently some of the ports seem to have "died"/ will not supply Poe to phones. Some work for data only. Other do not work at all. The switch has been restarted, this made no difference.
View 2 Replies
View Related
Sep 3, 2012
lost ip addresses and also says dns problems .how do i recover the addresses so i can connect to the internet
View 2 Replies
View Related
Apr 10, 2012
Recover a deleted Message
View 1 Replies
View Related
May 3, 2012
need to recover lost password
View 1 Replies
View Related
Oct 28, 2012
network Password is rejected as wrong in trying to add another appliance to it. Please confirm the password you have on file
View 1 Replies
View Related
Jul 8, 2012
I recently bought a Linksys E1200 router. During the set-up, while setting security up, we stupidly by-passed right by the WEP key it generated. This then booted us off the connection since we changed it, and since we didn't get the WEP key, we no longer can enter it in and connect to it. We tried entering in the default IP using another connection but it will not work.
View 6 Replies
View Related
Oct 3, 2011
I just recently bought this router (DIR-615 rev E3) to act as a Access Point for the dead wifi spot in my room downstairs. I set up everything properly (Turned off DCHP, set ports and gateway..subnet blah blah) and it was working fine. My wireless speeds were perfect, and had no issues with that. However, my wired speed was significantly slowed down. I have Verizon Fios and have the wire from that plugged in to LAN port 1 on my DIR-615. I have another wire going from Port 2 to the back of my PC. My normal speeds are about 30mbps down and 25mbps up. When I connect my internet through the second router (DIR-615) I get a maximum of about 3.0mbps up and down, doesn't go much higher than that. The wireless however, gives me about 11mbps both ways, which is fine.
I thought it might have been a firmware issue so I flashed to DD-WRT (build 15778), but the problem persists. I've tried most everything and am getting desperate. There's absolutely no logical reasoning for the slowdown. I have confirmed it's a router issue because I also turned off wireless on my laptop and plugged that directly into the router instead of my desktop and get the same 3mbps.
View 11 Replies
View Related