Cisco Routers :: Get Configuration From Dead RV082?

Jul 13, 2012

I have an old RV082 that I suppose has failed. The red diag light on the front panel is lit and nothing works. I've already replaced the unit, so I don't really need to fix it. Here's my issue: the setup on the old unit was pretty complex with a number of port forwards and other non-default settings. I'd like to recreate those items on my new router, but they were never written down so I don't know what they were. I've tried to connect a computer to one of the LAN ports, but they're all dead. Is there any way to get at the configuration page?

View 2 Replies


ADVERTISEMENT

Cisco Routers :: Elementary Configuration On Rv082

Aug 12, 2012

I am setting up a SBS 2011 Essentials sever using a rv082 router. I have a decent understanding of how everything is suppose to work, but execution has been sloppy. My aim is to set up a central storage location, back up services, remote access and VPN.  Yesterday I had set up dhcp and dns roles on the sever, configed port forwarding and firewall setting on the router, at that point I was just bouncing around everywhere trying to get stuff to work, clearly not the best way I know. Before I left I reinstalled sbs for a couple of reason, along with resetting the router to default.

View 1 Replies View Related

Cisco Routers :: RV082 Ssl Port Forwarding Configuration

Nov 20, 2011

I have recently replaced an RV082 router that had failed with a new RV082. The previous router was set up to forward port 443 ssl requests to a server in the network. Worked flawlessly for years and that is why I replaced it with same model. The new router is also set up to forward port 443 ssl requests to the new server. The issue is that the router responds with its own certificate and does not forward the request to the server.

View 5 Replies View Related

Cisco Routers :: RV082 Port Forwarding Or DMZ Configuration?

Apr 11, 2012

I have an RV082 V2 with 2.0.2.01-tm and I am having trouble with getting my Sprint Airvana to connect properly to the mobile service.  I've read on the Sprint forums indicate putting the Airvana in the DMZ generally allows the device to work properly; however, none have the RV series routers for tips on how to do this appropriately.  This device used to work fine behind the RV082, but I reset it one day and it no longer works.
 
The Airvana is a femtocell/router device with a WAN port and 3 LAN ports.  If I connect the Airvana directly to my cable modem, I get the appropriate connection and can then make calls through the device instead of through the Sprint connection; I live in a basement unit and get crappy signal without the device.  This proves the device works and that my ISP is not blocking the ports.  Sprint indicates the device uses UDP 53, 67, 68, 500 and 4500.  Their support sucks and they insist I put the Airvana before my router.  I absolutely do not want to use the Airvana as the router.  There are almost no configuration options in the router interface and it needs to be rebooted somewhat regularly, which would drop internet access throughout the house for 10-15 minutes while it reboots and finally establishes an internet connection.
 
As soon as put the Airvana behind the RV082, I no longer get the appropriate connection.  I can, however, plug my computer into one of the LAN ports on the Airvana and connect to the internet in general.  I have the router assign a static IP to the Airvana, and tried forwarding the required UDP ports to the IP.  This did not fix the problem.
 
I can certainly troubleshoot the port forwarding issues, but I would also like to look into putting the device into the DMZ, if possible.  I've not worked much in this area, so I am unsure how to appropriately configure the router to allow this to happen.  Is it possible to have the Airvana in the router DMZ without having a public IP for the device itself? 

View 2 Replies View Related

Cisco Routers :: RV082 V3 - View Configuration File?

Feb 27, 2013

Currently, the backup config is not human readable...any way to convert this?

View 1 Replies View Related

Cisco Routers :: RV082 Dual WAN Configuration Required

Jun 12, 2012

RV082 configured for Dual WAN [Code]....

(2) identical DSL connections, configured as Static IP (not PPPoE) with modems in bridged mode. Static IP's are /25 subnet and same gateway  ** this may be a problem? Dual WAN set for Load Balance, network service detection is OFF
 
We have a 2003 terminal server running and successfully receiving connections through both WAN connections.  Depending on location, half the users are connecting to WAN1 IP and the other half to WAN2 IP.  We are getting sporadic disconnects of the remote users when they are idle for a couple minutes and automatic reconnection of the session takes over a minute.  If they close the (locked up) session and reconnect manually it will let them in right away. 
 
Could the handling of the Dual-WAN be the culprit?   Could the same gateway for both WAN's create this issue upstream (out of my control)?I am going to move everyone to connecting through WAN1 and then change to Smart Link Backup and see if the issues persist.
 
Another thought is to use a secondary IP on the terminal server and use Protocol Binding to match "All traffic" for IP1 to WAN1 and IP2 to WAN2, which theoretically would stabilize the situation?

View 36 Replies View Related

Cisco Routers :: Resurrect Dead WLAN On WRVS4400N

Jul 3, 2012

After replacing my WRVS4400N Gen2 with a RV220W, I would like to know if there is a solution to resurrect the dead wlan, killed by the well known buggy firmware some time ago (I could not let it fix it in those days, cause some of use may need those devices every day, so "send it in and we fix it in some weeks" was a bad joke).

I do not need the "old" router atm, but it would be nice to have a backup device in hands, because the VPNs created by those devices are vital for my business. Is there a cheap way to fix this device, or would you say it would be cheaper to buy something else? (And after those two devices, I'm not sure that the next one would be a Cisco device again .

View 1 Replies View Related

Cisco WAN :: RV082 Dual Wan Terminal Server Configuration

Jan 31, 2012

I've a RV082 with 2 internet connections.The idea is to permit external connections to my server and if one Internet line falls, automatically switch to the other.
 
We have configured the router in Smart Link backup.We try to connect with WAN1 and WAN2 enabled and all works fine.
 
We try to connect with WAN1 disabled and automatically WAN2 is activated.The problem start here...if WAN1 is activated while there are connections using WAN2, these connections falls!
 
How I must configure the router to permit that active connections are not disconnected from WAN2 even when WAN1 connection come back?

View 1 Replies View Related

Linksys Wired Router :: Rv082 - Two Ranges Of IPs For DMZ Configuration

Apr 28, 2013

we have a RV082 and have the DMZ option enable for a range of IPs within the same sub-net of WAN IP and this works great. I have another range of Public IPs from our ISP that is not in the same sub-net of the WAN IP and do not see a way on the RV082 to include this 2nd bank of Public IPs in the DMZ.
 
Our ISP internet feed plugs into the RV082 WAN port and we have a switch plugged into the DMZ port of the RV082 that is used to connect the public devices in the current DMZ. Both banks of Public IPs from our ISP come over via the ISP internet feed plugged into the WAN Port.
 
My question is, if I cannot configure a DMZ rule to allow this 2nd range of Public IPs to "travel" to the RV082 DMZ port, how I can do this without one-to-one NAT or port port forwarding? The device I am deploying needs to be at the border of our network (like in the DMZ) and have some ability to talk to a device on our LAN.  

View 1 Replies View Related

Cisco Routers :: VPN Between Two RV082 Routers Not Working?

Aug 7, 2012

We're getting the following message in the logs when we ry to connect: encrypted Informational Exchange message is invalid because it is for incomplete ISAKMP SA
 
One of the router is a V2 and the other is a V4 if that makes any difference.

View 12 Replies View Related

Cisco Routers :: LAN To LAN Routing RV082?

Jan 29, 2013

We have an RV082 setup with WAN to the internet and LAN IP of 192.168.188.1.If I add a static route like so:
 
network: 192.168.166.0
mask: 255.255.255.0
gateway: 192.168.188.2
hop count: 1
interface: LAN
 
The device with IP 192.168.188.2 will be connected directly to one of the LAN ports on the router.Will that work to route, trying to get to 192.168.166.0 to the IP of 192.168.188.2?It just seems odd because the packets would hit the router then go back out through the LAN port. 

View 4 Replies View Related

Cisco Routers :: Rv082 Configure One-to-one Nat

Nov 17, 2011

isco epc3925 in transparent bridge provided by isp with following wan details

ip=x.x.x.120 subnet=255.255.255.248 gw=x.x.x.121 and 2 dns server ip's
 
I can't get the one-to-one nat working. read in some forums that the rv082 can do the job.

View 4 Replies View Related

Cisco Routers :: RV082 VPN Passthrough

May 9, 2013

I have a Meraki Firewall that sits behind my Cisco RV082. The Meraki is setup to run a VPN connection with my server but I am having problems passing the VPN traffic through properly.
 
I have 2 Uverse Internet Connections that the RV082 using load balancing so that they are shared. I have 10 static IP's.
 
I am trying to come in on one of my static IP addresses throught the Cisco RV082 to the Meraki and after doing a capture on the meraki it appears that it is starting to receive data to intiate the VPN connection but when it sends data back to the VPN client machine it never makes it.

View 1 Replies View Related

Cisco Routers :: RV082 / No Connection To ISP

Nov 12, 2012

I have reset my RV082 router (both wit the reset  switch and the factory default wizard) and run the setup wizard but  regardless I can't connect to shaw.ca which is my service provider. I  notice that if I use http://192.168.1.1 the browsers (IE & FF)  default to https://192.168.1.1 and then I am prompted for a certificate.  I can enter if I ignore the request but after getting in I simply  cannot connect to my ISP.

View 4 Replies View Related

Cisco Routers :: RV082 NAT To Other Subnets?

Jan 12, 2012

Is it possbile to NAT to other subnets with the RV082. It is on a 192.168.41.x and I have a phone system on a 192.168.20.x. After searching all over others are saying no.

View 4 Replies View Related

Cisco Routers :: VPN Fail With RV082

Jan 14, 2013

I just set up a new Linksys/Cisco RV082 router with the intent to get VPN working from outside the building. I have gone through the setup and while everything looks good, I have not been able to connect yet. I have tried everything that I know how, and am now hoping to get the answer from some pros.
 
Here's my setup. We use Comcast Business class internet. The modem is plugged into WAN port 1 on the RV082. I'm using the router as a DHCP server, that is working fine. My local subnet is 192.168.0.0/220
 
Right now all I want is to be able to log in as a client using QuickVPN. I set up one user and a client to VPN tunnel using the router's config page. Here's the settings I have:
  
Tunnel Interface is setup on WAN1, checkbox is enabled.
 
Local Group Setup
Local Security Gatewaytpe: IP Only
Local Security Group Type: Subnet

[Code]....

It seems like something is blocking the connection, but seeing that I have tried this after disabling the firewall completely it doesn't make sense to me. I also went into the config page for the modem and set up the router as a DMZ. I have also tried connecting with the client built into Windows 7, but that doesn't work either, I just get "connection failed with error 619"
  
I have the port in QuickVPN set to auto, but have tried both 443 and 60443 with same results.
  
I ran a port scan at [URL] and it shows I have 3 ports open...80,443, and 1723

View 4 Replies View Related

Cisco Routers :: VPN Not Working With RV082

Jan 24, 2012

I have a VPN tunnel from one RV082 to another, first router has IP range of 192.168.1.0 and the second one has range of 18.18.18.0, the connection works fine, here is where the issue starts, I am at a PC in the 18.18.18.0 network and I ping an IP in the other one e.g. 192.168.1.50 and it pings fine, but when I try to RDP into it or do anything to it I get no response, is it a firewall issue? Is it a NAT issue? I am at a loss, now that IP i mentioned does have RDP enabled and working because it is being port fowarded in the 192.168.1.0 router and I can access it through the public IP.
 
Also a workstation with a static IP 192.168.1.18 I can ping it if im in the local network but if I am in the remote one I cannot at all.

View 7 Replies View Related

Cisco Routers :: RV082 Restarts Itself

Jul 28, 2010

we have an RV082 router that a few days ago started restarting itself after normal usage.The simpton is that when people come to office, starting using the Internet the RV082 resets. It stays online for 3 to 12 minutes and then it resets again.
 
clicking on Reset to Factory Default in the web interfaceafter the reset, I confirmed that it was reset to factory default I reset it again using the reset buttomre-configure the RV082 manually.I also tested with another identical rv082 (hw version and firmware version) and after doing a backup of the config of the original rv082 and restoring it in the new rv082, the same problem happends.

View 20 Replies View Related

Cisco Routers :: RV082 NAT Table Too Small

Mar 15, 2013

I have an RV082  10/100 8-Port VPN Router and have configured the NAT table to allow for remote users, however I've run into an issue. It seems like there is a limited number of entries that you can put in the table,10, and I need to configure about 5 more IPs. Any way to expand the NAT table, or alternatively recommend a different router. I would also be willing to add another router to the network, but I have little experience doing that.

View 3 Replies View Related

Cisco Routers :: Are RV042 And RV082 SIP Aware?

Jul 18, 2012

Are the RV042 and RV082 routers SIP AWARE?I haven't had any luck finding documentation stating such.

View 2 Replies View Related

Cisco Routers :: RV082 Web Admin Lockup?

Oct 20, 2011

Just purchased a RV082 and once I switched a bunch of users over to it I can no longer access the web admin section.  I have tried using both IE and Firefox and have used multiple workstations.  I get to the login screen but it doesn't get any further.  I am running the latest firmware v4.0.4.2-tm.  It works for a while then just stops.  The only fix is to turn off the device and back on and then it starts working again.
 
I've seen this issue on other small business cisco devices and had to stop using this because of this issue and switch to a higher grade cisco product but was hoping that this particular issue would have been resolved now across cisco's products.

View 7 Replies View Related

Cisco Routers :: Outbound Nating With RV082?

Jan 9, 2012

I just migrated our office network router to a RV082. While configuring it, I came across three problems: 
 
(1) From our ISP we have four public IP addresses which I want to make use of for outbound traffic. With the previous router we used we could configure LAN IPs(ranges) to map to static public IPs. Does RV082 support this? I could not find an option for that at the web-interface. From what I understand the 1-1 NATing only goes both incoming and outgoign ways and actually is 1-1 and not the many-to-one I am looking for.
 
(2) How is it possible to configure incoming port forwards to use a specific WAN interface? Will it always be the primary WAN interface?
 
(3) Does the telnet access provide more configuration options? I could not log in to it with the same user credentials as with the web-interface.
 
Serial Number : NKS1532xxxxFirmware Version : v4.0.4.02-tm (Jul 4 2011 13:30:56)PID VID : RV082 V03Firmware MD5 Checksum : 1f84d8d0a2a8b99f9bfa4409e64547aaLANWorking Mode : Gateway

View 0 Replies View Related

Cisco Routers :: Rv082 Dmz Rule Limitations

Apr 27, 2013

we have a RV082 and have the DMZ option enable for a range of IPs within the same subnet of WAN IP and this works great. I have another range of Public IPs from our ISP that is not in the same subnet of the WAN IP and do not see a way on the RV082 to include this 2nd bank of Public IPs in the DMZ. Our ISP internet feed plugs into the RV082 WAN port and we have a switch pulgged into the DMZ port of the RV082 that is used to connect the public devices in the current DMZ. Both banks of Public IPs from our ISP come over via the ISP internet feed plugged into the WAN Port. My question is, if I cannot configure a DMZ rule to allow this 2nd range of Public IPs to "travel" to the RV082 DMZ port.

View 0 Replies View Related

Cisco Routers :: RV082 LAN Subnet Mask

Nov 12, 2012

I would like to set the subnet mask off the lan to 255.255.240.0 but the selection menu do not allow to do it.

View 8 Replies View Related

Cisco Routers :: Can Connect SA520W To RV082

Sep 25, 2012

I wanted to know if you can connect a Cable modem to a SA520W, then connect a RV082 to the SA520W?

View 5 Replies View Related

Cisco Routers :: RV082 VPN - Connects But No Access?

Mar 24, 2013

We recently moved our network over to RV082 router and its working great, well now we want to take advantage of VPN for our sales staff.
 
I was able to setup the VPN and using a PC at a remote office I can launch the quick connect and it connects right away, RV0 even shows the user connected. However the user cannot ping anything on our network via name or IP, connect to any resources, etc...
 
My understanding was when the client VPN would connect the user would get an IP from DHCP (this is on our Server 2008 DC) and they would be using that address, but when I run IPCONFIG on the client PC they just have there standard IP from remote office.

View 8 Replies View Related

Cisco Routers :: RV082 Backup Vpn To C2851?

Feb 10, 2013

I'm planning to buy a few Cisco RV082's for remote offices and using them to connect to main office Cisco 2851 site to site vpn. So I guess, simple site to site vpn will work without much problem, but I wonder, will backup vpn feature work as expected on backup WAN channel and how should I configure it on the IOS side?

View 1 Replies View Related

Cisco Routers :: RV082 - Internal DNS Server

Jan 19, 2010

The RV082 is a great unit, however when VPN clients connect the QuickVPN Client has a setting to use the Remote DNS settings of the RV082. The RV082 has no way of linking or using a user-defined DNS. I have an internal DNS Server that I would like the VPN Clients to query on internal name lookups (kindof the point of having client vpn, so they can access internal network shares etc. On the diagnostic page the ping and name resolution can only check external DNS and internal IP's. Wouldn't it make sense to at least make the RV082 aware of internal DNS Servers? Then the Ping and DNS lookup would be able to test both zones? Is this something that can be looked at by Linksys Developers for this product? The WRV210 (a cheaper and lower level model) has this functionality.

View 8 Replies View Related

Cisco Routers :: RV082 V3 Web Management Inaccessible

Aug 29, 2012

Experiencing a strange issue with v3 hardware. After a short period of time, I cannot log into the web administration - either locally through standard port or remote through non-standard port get login prompt, enter correct username & password, page refreshes with blank background and first page (status?) never shows.power cycling the router restores access to the web administration page, for an uncertain period of time before it barfs again.
 
I was running older firmware, updated to newest 4.2.1.02 (?) and same problem.  Only thing that is better is the internet didn't completely lock up when I tried to access the administration page, like it did on the older firmware.

View 4 Replies View Related

Cisco Routers :: VLANs Not Separated On RV082?

Dec 1, 2010

I have an RV082 for use in our office. I wanted to create a public acess point on a different subnet/vlan and so configured port 8 of the RV08 as VLAN2. When I plug a laptop into this port it immediataley gets an IP address from the DHCP server on VLAN1 and can communicate with the rest of the network.I thought the whole point of the VLAN option was that this shouldn't happen - what I've incorrectly configured?

View 17 Replies View Related

Cisco Routers :: Getting IPv6 Support For RV082

Jan 27, 2010

Is there any IPv6 support planned or in the works for RV082?

View 3 Replies View Related

Cisco Routers :: RV082 Timeout After Every 30 Minute?

Nov 14, 2012

i purchases cisco rv 082. i set MTU vale at 1500.i use public IP for WAN and just using one WAN.

View 4 Replies View Related

Cisco VPN :: V2 And V3 RV082 Routers - No Traffic Gets Through Tunnel

Feb 13, 2012

I'm trying to setup a VPN between an RV042 V3 and an RV082 V2 router. They get connected but no traffic gets through the tunnel. I tried with and without firewall,DPD, Keepalive, forward secrecy but nothing worked. What should I do? I don't want to throw out the V2 routers. V3 to V3 connects fine.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved