Ethernet Port Not Recognizing Ethernet Cable?

Apr 30, 2011

I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.

View 14 Replies


Wireless Router Not Recognizing Ethernet Cable In The WAN Port?

Jul 10, 2012

I have a D-link WBR-2310 wireless router connected to a ZyXEL P-600 series modem. Everything worked fine untill a couple days ago when I had a power surge; since then the wireless router won't show on the modem that the ethernet cable is plugged in, and I get no wireless or DSL internet. I called the internet service provider, and they told me to reset both the modem and the router, which I did and it worked fine for about an hour; then it didn't recognize the cable again. I thought maybe it was the ethernet cable itself so I bought a new one, and it didn't correct the problem. When I hook any of the cables up directly from the modem to the labtop or the pc the ethernet light comes on and I have internet connection again. Why doesn't my router recognize the cable?

View 1 Replies View Related

Router Isn't Recognizing Ethernet Cable?

Dec 24, 2012

So this morning I was planning to reset my router because my internet was feeling a bit laggy. Omce i did, its lights turned on except for the ethernet light.It was working perfectly last night

Ive tried resetting the router a few times with no results

ive ran the Windows troubleshooter with it recognizing that:

The Local Area Connection adapter is disabled: Detected

Enable the wired network adapter: Not run

View 3 Replies View Related

Routers / Switches :: Difference In Ethernet Cable And Ethernet Networking Cable?

Apr 28, 2013

Is there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.

View 1 Replies View Related

Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC Won't Detect Ethernet Cable?

Aug 8, 2012

I am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.

View 9 Replies View Related

Ethernet Cable To Phone Port On Router

Sep 24, 2012


View 1 Replies View Related

Ethernet Port Doesn't Recognize Any Ethernet Cord

Dec 26, 2011

I've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down. I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.I use a Sony Vaio VGN-NS140E with Windows Vista SP2.

{ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection.
Windows IP Configuration
Host Name . . . . . . . . . . . . : FairyHo


View 7 Replies View Related

Linksys Cable / DSL :: WAG320N Set First Ethernet Port To WAN And Got Connection

Apr 4, 2011

Got BT Infinity installed today, thought I would ditch the Home-hub 3 and go back to my tried and tested WAG320N. Got it configured, set the first ethernet port to WAN and got a connection.Ran speed and comes out at 26Mbit.using the Home-hub 3.0 I get 37.5MBit.

View 4 Replies View Related

Dell Laptop Latitude 610 Unable To Connect To Internet Via Ethernet Cable Port

Dec 9, 2012

I have a Dell Laptop Latitude 610 and I have not been able to connect to the Internet via the ethernet cable port for some four months now. I've tried downloading software from Dell's web site, I bought (and returned) and USB to Ethernet cable, only to find out that it was a model ahead of what this machine needs.I've asked local repair place (Microcenter) what it might be, but they'll only tell me after I pay $70 just to open it up.Another repair guy said that it is probably the motherboard and it wasn't worth fixing. (Yet if it was, wouldn't the entire computer decide not to work at all?) [code]

View 3 Replies View Related

Ethernet Port Splitting Options For Net-book File Sharing If No Crossover Cable?

Jul 19, 2011

I have a desktop with a "black screen", but the computer is running. I need to get files/documents off that computer. How can I get them without being able to see the monitor? I have a netbook, a portable hard drive, and regular ethernet cables, but not a cross over cable.

View 1 Replies View Related

Linksys Cable / DSL :: WAG160N Blinking With No Ethernet Cable Attached To Router

Feb 24, 2012

I have a  WAG160N  wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset  ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.

What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ? 

View 1 Replies View Related

Linksys Wireless Router :: E3000 Ethernet Port 4 And Internet Port Not Working

Jul 3, 2012

There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.

View 2 Replies View Related

Cisco WAN :: Nexus 5010 Fixed Port - Group C (17-20) Encrypted Ethernet Port

Oct 14, 2012

if I can use the encrypted port as unencrypted ethernet ports? url.. Each individual port on the Cisco Nexus 5010 switch is numbered, and groups of ports are numbered based on their function. The ports are numbered top to bottom and left to right.There are 20 to 28 ports on the Cisco Nexus 5010 switch, depending on which GEM is installed.
The 20 fixed ports form group 1 and are named 1/port_number. Ports 1 through 16 are unencrypted Ethernet ports. Of these, ports 1 through 8 are 10-Gigabit Ethernet and 1-Gigabit Ethernet-capable ports. Ports 17 through 20 are encryption-capable Ethernet ports.

View 1 Replies View Related

Cisco WAN :: 857 ADSL Possibility To Configure Fast Ethernet Port As WAN Port

Apr 4, 2012

I have a Cisco 857 router which i used for Internet connection with RJ11 connectior (ADSL0 POTS) but now the ISP has changed the internet link with PPOE type and the ONT connection is RJ45 , Is there a possibility to configure one os the Fast Ethernet ports as WAN port for internet.

View 2 Replies View Related

Cisco Switching/Routing :: 6500 Ethernet Sub-interfaces Over Metro Ethernet

Feb 20, 2012

I curently have 2 Data centers connected with a Metro Ethernet Connection.  Each Data Center has 6500 with Sup720s.  The Metro Ethernet connection is currently conected by a L3 routed interface. I now need to enable VRFs between the locations and want to determine the best way to adjust the Mero.  I was considering adjusting the routed interface to use Ethernet sub-interfaces.  Each VRF would be given a different subinterface over the Metro Ethernet connection.  I have done this on internal LAN connections but am concerned about exteding across data centers over Metro E. 

View 1 Replies View Related

Video From Mac To Pc Via Ethernet Cable?

Jul 21, 2011

I'm trying to set up a system where a lecturer can sit at home and give his (video and audio) class across the street via an ethernet cable strung across the street. The only problem is he has a mac, and we in the class running it aren't going to leave our PCs for macs!Is there any simple way to connect the mac to PC (without running through a router, as it slows down the system)?If so, what programs will work best for both PC and mac for streaming the video (and are free)[BTW I don't think a 100m cable is too long for the signal.

View 2 Replies View Related

Ethernet Cable Too Run Around My House?

Dec 15, 2012

What is the best Ethernet cable too run around my house?

View 3 Replies View Related

Ethernet Cable Isn't Being Read?

Mar 19, 2013

I'm switching from using a wireless usb adapter to a wired connection via ethernet cable.

When I plug the ethernet cable in however nothing happens, I've tried using it with a different computer and it works like a charm but this one doesn't seem to be working right.

HP Pro Small Form Factor 3010 Windows 7 32bit (Other computer was using windows vista)

Windows IP Configuration
Host Name . . . . . . . . . . . . : HPPro3010
Primary Dns Suffix . . . . . . . :


View 1 Replies View Related

The Ethernet Cable Isn't Recognized?

Sep 20, 2012

Yesterday I was on my computer when all of the sudden my internet stopped working. I am using windows 7 and at the bottom right I see a big "X" over the small computer icon. I already tried a computer reboot, a router+modem reboot, system restore, and I even reset the power to the room of the modem+router from the fuse box in my house. I tried everything.

I'm sure the problem must be from the actual cable or mother board itself. ( I hope it isn't ) I tried blowing out any dust from the ports and making sure that nothing was blocking the connection. I fell asleep last night with the internet not working, and woke up to it working. Every other computer in my house works except for mine. I tried all of the router ports as well. I did not attempt another ethernet cable though because my room is far and I would need to make a very long one.

View 14 Replies View Related

Can't Connect With Ethernet Cable

Jul 11, 2012

I just reinstalled Windows 7 on my computer again and appear to be having trouble connecting to the internet with my ethernet cable. I've only ever used a wired connection on this computer, but am completely unable to do so at the moment.

View 11 Replies View Related

Can Use Internet Without An Ethernet Cable

Aug 5, 2012

The Ethernet cable really gets in my way and I'm trying to find a way to use my Internet without it... What would I have to change on my computer?

View 1 Replies View Related

Ethernet Cable Not Being Recognized

Apr 25, 2013

An older post on this forum told me to remove the adapter's driver software and restart the system. I did this, and it tried to install the software on startup but it keeps failing when installing. Forcing it to look for new driver software resulted in it saying the best software is already installed.

View 4 Replies View Related

No Connection On Ethernet Cable

Aug 10, 2012

I have vista system, belkin wireless realtec ethernet cable and alice modem internet provider is o2 everything is working as i have checked but I GET NO CONNECTION everything was fine for 2 years and then suddenly after checking the system I am told that the ethernet cable is not connected,

View 5 Replies View Related

Ethernet Cable Is Not Reading?

Dec 18, 2012

My Ethernet Cable is not reading, when ever i plug in the Ethernet cable into the port into my Toshiba laptop, it doesn't read, What is the problem, My cable, Laptop or (ISP) Internet service Provider?

View 1 Replies View Related

Printer To Pc Via Ethernet Cable Only?

Dec 21, 2012

With just a printer and an ethernet cable, can this be used to print without internet, modem, etc. just like using an USB to printer?

View 3 Replies View Related

Connect Two PCs With Ethernet Cable?

Dec 31, 2012

I am trying to connect my two laptops with one Ethernet cable without any internet to a Network. However, just one of the laptops is identifying the connection, the other doesn't recognize that it has been connected to another laptop. Obviously, the cable itself is working (because one laptop identifies the connection), but what might be the problem that the other laptop doesn't recognize any connections?

View 6 Replies View Related

Difference Between LAN And Ethernet Cable

Jul 4, 2012

I would like to know what is the difference between LAN cable and ethernet cable? Is both cable is same? can we use CAT 6 and CAT 5 cable as LAN CABLE?

View 4 Replies View Related

Can't Connect Through Ethernet Cable

Sep 13, 2011

I'm trying to connect to the internet via the ethernet cable available in my office at the university but it won't work. I'm able to see other computers connected to the network, share printers and have access to shared files but have no internet access. I know that the problem is not the cable or socket because my old XP computer connects to the internet just fine.

I had a similar problem back at home but I just restarted the modem and was able to connect.

Lenovo x220 tablet
Network card: Intel 82579LM Gigabit Network Connection

View 6 Replies View Related

No Connection Via Ethernet Cable?

Aug 19, 2012

So I am trying to connect my desktop to my router via an Ethernet cable. When I plug the cable to my PC, it won't connect to my router. However when I plugged the cable to a laptop, it worked fine. I also went to check the Broadcom NetLink Gigabit Ethernet adapter in Device Manager and it has an error that says "This device is not working properly because Windows cannot load the drivers required for this device

View 2 Replies View Related

Ethernet Cable Not Detected?

Jan 17, 2012

My onboard adapter wasn't working so I bought a new dlink adapter. Adapter installed and is registering in device manager.. but it says that there is no ethernet cable connected. I have a laptop connected to the same router that is connecting to the internet. I switched out cables with ones that worked with the laptop and on the desktop before. I have cycled the router

View 2 Replies View Related

Ethernet Cable Not Detected

Sep 26, 2011

I'm having trouble with my ethernet port. I have a Asus g73jh computer running 64-bit windows 7 and i have an atheros ar8131 pci-e gigabit ethernet controller NDIS 6.20 for my network adaptor, that is fully updated and says is working properly but doesn't recognize when an ethernet cable is plugged in. The cable works on my xbox fine so I know that the cable works fine. I'm pretty sure that there might be something physically wrong with it or I just don't know.


View 7 Replies View Related

Can't Run Ethernet Cable From Router To PC

Oct 4, 2012

At the moment I cant run an ethernet cable through my house from my router to my desktop PC (Which is where I use the internet/play games etc) and connect directly that way because my parents dont want cables going through the house etc etc.For the past 2 months or more I used my old laptop to pick up the wireless connection downstairs then I bridged the connection and used my ethernet cable from the laptop into my PC/Xbox or whatever, no problems until today, I wouldnt even have to log into the laptop, i would just turn it on and leave it at the login screen and I would have internet on my desktop/Xbox.Tried to do that today and was getting unidentified network on my desktop, i dont know what the problem is, I can connect directly to my router with the ethernet (I tried it) but not the old way anymore, i'm on the laptop now on the wireless internet.In network connections there LAN network isnt there anymore, its just the 'Unidentified Network' which is the bridged connection.

View 8 Replies View Related

Ethernet Cable Not Working?

Jan 28, 2013

I have two ethernet cables, a long one and a short one. The short one works fine, but the long one does not work with my computer. It has worked with other laptops, so I am fairly sure the cable itself is fine - is there anything I can do

View 3 Replies View Related

Copyrights 2005-15, All rights reserved