There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.
View 2 RepliesI was very happy working with my WRT610N connected to the ethernetport of my previous internet modem. Recently I had to switch to a new modem CISCO EPC3925. Unfortunately this combination does not work anymore. I don't get an internet connection on my WRT610N anymore. I therefore have to connect all computers (LAN and WIFI) to this EPC3925. Especially for the WIFI I'm not fully happy. My IPAD2 sometimes does not want to connect, a problem which never occurred when connecting to WRT610N.
I probably need to change a setting, but where? In the EPC3925 or in WRT610N?
i am a using a WRT54GH linksys router.. which was working fine for a year.. there was thunderstorm and lightning a few days back.. since then my routers internet port (the first port which says internet in yellow) has stopped working..
View 5 Replies View RelatedIm trying to open up some ports on my e3000 for the use of Teamspeak and my Teamspeak server. However when i get of the information filled into the single port forwarding under the Gaming & Applications tab, and click save settings. The page just refreshes, with none of the changes being saved.
View 6 Replies View RelatedI've made an observation that the newer routers above my E3000 don't have LED icons to indicate the port is connected/active and also to show Wi-Fi is active? I find this good at a glance without having to go look in the back of the unit to see which ports are open etc.
View 1 Replies View RelatedI have an E3000 with firnware 1.0.04. A forwarded port is spontaneously changing the IP address assigned to it, but with no change indicated in the singel port forwarding configuration.I have a web server on IP=XXX.XXX.XXX.7, and another device on my LAN with an internal web server at IP= XXX.XXX.XXX.8. The single port forwarding configuration is:
HTTP, external port 80, internal port 80, protocol=TCP, to internal IP address xxx.xxx.xxx.7, enable checked The configuration is saved, and all works well for for hours and/or days and I can use the web host from the intenet as expected. However, after a few days or hours the E3000 suddenly starts sending the http traffic to IP=xxx.xxx.xxx.8 instead of xxx.xxx.xxx.7. When I log in to the router and look at the port forwarding page, it still says it's forwarding the http traffic to xxx.xxx.xx.7 ~ even though all http traffic is being sent to xxx.xxx.xxx.8! I have to reboot the router to get the port forwarding to work properly. If I leave the device at xxx.xxx.xxx.8 powered off, the router seems to work fine for extended periods.
There are no port forwarding services in the router that reference IP=xxx.xxx.xxx.8 , and it does not appear that the port forwarding problem is related to DHCP. All devices on my network have a reserved DHCP address based on their MAC. It does not appear that the spontaneous port forwarding change occurs when when the xxx.xxx.xxx.8 device powers up and gets it's address via DHCP. I have also deleted the xxx.xxx.xxx.8 device from the DHCP reservation table and simply access the device as needed by referencing it's IP, and xxx.xxx.xxx.8 is outside the range of DHCP assigned addresses, and the spontaneous port redirection still occurs once in a while.Is there a known bug where forwarded ports are sent to the wrong IP address?
I have external hard drive connected to E3000. It is formatted as NTFS and working fine. However if I disconnect from router and connect to PC usb port directly, I get a message that hard drive needs to be formatted.
View 2 Replies View RelatedI have a linksys E3000 and a WD My Book World Edition 2. (WDMBWE2)What i want is to access my WD from any where. I have tried setting up a simple single port forward to the WDMBWE2, which worked great. I was able to view all my files from anywhere.however, i wasn't prompted for any login.so basically anyone could access and modify all my data.I have obviously deactivated this again.
I have already tried setting up user accounts on my WDMBWE2 to try and solve this, but that only creates the problem of my TV and music player not being able to access it anymore(they both cant type in login information).Is there any way to make the E3000 prompt me a for login/password when requesting that port?
i am trying to port forward my router so that i can run a minecraft server. When I put in th port number and save the changes, it brings me to a screen that says my changes have been saved yet when i go back to the page they haven't. I have tried deleting the cookies on my browser, using another browser, using another computer, and hard resetting the router for ten seconds. None of this works.
View 2 Replies View RelatedMy Cisco E3000 has slowed it's Ethernet speed so slow that it times out when going to Facebook, YouTube or any site that is complex. It worked fine until one day it just gave up. It's connected to DSL Modem with Ethernet To a Apple Mac G5 power PC There are two other older macs connected via Ethernet, same problem. When I took the router out of the chain, and connected G5 directly to modem, normal internet speed. My firmware is up to date. Both wireless bands work great. When I look at Cisco Connect, everything looks normal. factory settings.
View 7 Replies View RelatedI attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.
View 8 Replies View RelatedWe have the E3000 Router and the guest internet access DOES NOT work. We occasionally repair other people's PC's and I seriously do not want to allow access to our home network. Recently, we are trying to access through guest, on a Win 7 Dell Notebook. It takes the passcode but no internet connection.
View 1 Replies View Relatedim using linksys broadband router model no WRT54GC firmware version 1.06....im using it since 2005 still now i didn't face any problem, but since 3days im facing a problem all of a sudden. i.e im unable to connect through Ethernet port ( through lan wire) to my PC, but i can access router through wifi.when i connect through wifi it is saying that there is no internet access. but i can access my router administration.i cross checked with another pc and another connecting cable , but same problem, no use i also tried resetting my router, updated my firmware. no use.
View 1 Replies View RelatedMy custom built desktop is not recognizing an ethernet cord. The lights are not coming on when I plug it in. The device manager does not show network adapters. Im not sure where to find it/ not sure its there.
View 6 Replies View RelatedI upgraded to a 6500 from a e4200. I use ports 81-84 on test web servers set to static Ip,s when I open the ports nothing can get through from the outside. I can hit the pages internally on those ports and IP's but not from my external ip to those ports. When I set my old router everything is fine.
View 9 Replies View RelatedI set up port forwarding on my router. When I go to canyouseeme.org and put in my public IP address (I can ping the IP address with no issues) and the port that I'm forwarding it says it can't hit the port.
View 2 Replies View RelatedI've read over the FAQ and followed the normal instructions for port forwarding, but can't seem to get it to work with this particular router, E2500. I have tried both the single port forwarding and the multi port range forwarding, and neither works. I've tried an older WRT54G router and port forwarding works fine on it, so I know it's not my ISP.
View 4 Replies View RelatedWRT54GL has an option to restrict or share the bandwidth equally to each ethernet port or wireless? I need this option in a low bandwith area because the first computer connected to the router who makes some traffic (e.g. youtube) takes all the bandwith allocated by the ISP. url...
View 1 Replies View RelatedI recently installed Arkham City on my computer played it for a while, tried google chrome, gave me a corrupt profile error or something (internet still worked and was connected at the time) restarted my computer and now it's telling me there isn't an ethernet cable connected to my computer.
Here's what I tried so far:
-Uninstalling and reinstalling the driver
-Updating the driver
-Using the network troubleshooting for windows 7
-Doing a system restore before I installed the game (gave me an error saying could not complete restore)
-Currently scanning my computer in safe mode with networking (seeing if that might work, doesn't) with malewarebytes
-Unplugged and replugged the router and modem
-Checked the router on another computer to see if there's a connection (there is none)
-Checked the router to see if there is a light in the port connected to the ethernet, it's blinking at a very slow a steady pace, unlike the ones around it which are solid green lights
-Tried the ethernet cable on another computer, works fine.
computer specs:
Windows 7 64-bit home premium edition
Gigabyte GA-MA790X-UD4P
NETGEAR router WNDR3700
I was having a cleanup of the desk and unplugged the cable shortly, and after plugging it back in it could no longer find any connection. The only way I seem to be able to get connected to the internet now is to run a cable to my ethernet switch, and then onwards to my computer itself. Even when doing this the net seems to be very slow, won't connect through Chrome etc or just flat out won't connect.
View 5 Replies View RelatedHaving a problem with port forwarding on their WRT400N? I'm forwarding one service (https) and this stops working if it's not accessed after a 10 days or so. The only way to get it to work again is to reboot the router. I’m running the “latest" firmware, which is an oxymoron considering it's been over 12 MONTHS since Linksys updated the code... Which is appalling considering this appears to be their flagship wireless N router.
View 5 Replies View RelatedI've been configured my device to forward FTP service to my server, however, I can't access this service outside from my network. I used Single Port Forward and not worked, after, I've used Port Range Forwarding starting in 20 to 21 and not work again.I've sniffed my computer and I've found just 3 outsides packages without response.I've tried with directly IP ADDR and DYNDNS ADDR, but neither one or other worked.
View 1 Replies View RelatedI currently have an E1200. I can port forward single ports, but when I attempt to forward a range of ports it doesn't work and there is no error in the log.
Specifically I am port forwarding RTP ports (10000 - 20000). I am aware of the security risks, please do not preach.
I have the Asus P5QL-VM DO motherboard.On the Ethernet port the lights are not working and I can not get an internet connection.
View 1 Replies View Relatedwas using windows 7 ultimate OS. last night my internet antenna was hit by lightning. later i switched on my PC and i was to browse internet, but i couldn't connect to it. i don't know whether my Ethernet port was damaged by lightning[CODE]
View 1 Replies View RelatedI want to use Qos in EA2700. I want to know whether the port in the Qos means the port of local computer or the port of server. Or is it a source port or a destination port?
View 3 Replies View RelatedI've been using a WRT120N on a local area connection.The WRT120N acts as a gateway and also to connect to the PPOE connection, via a bridged adsl modem.I've noticed that the LAN port 1 was flashing although the network cable was disconnected from the physical port. I've restarted a few times but to no avail as well. Ever since that, I've noticed that connection through cable are unstable and hard.Now, I'm not able to reset or upgrade the router's firmware.Is there any other way to be done so that I can get this router working as normal again.
View 6 Replies View Relatedif I can use the encrypted port as unencrypted ethernet ports? url.. Each individual port on the Cisco Nexus 5010 switch is numbered, and groups of ports are numbered based on their function. The ports are numbered top to bottom and left to right.There are 20 to 28 ports on the Cisco Nexus 5010 switch, depending on which GEM is installed.
The 20 fixed ports form group 1 and are named 1/port_number. Ports 1 through 16 are unencrypted Ethernet ports. Of these, ports 1 through 8 are 10-Gigabit Ethernet and 1-Gigabit Ethernet-capable ports. Ports 17 through 20 are encryption-capable Ethernet ports.
I have a Cisco 857 router which i used for Internet connection with RJ11 connectior (ADSL0 POTS) but now the ISP has changed the internet link with PPOE type and the ONT connection is RJ45 , Is there a possibility to configure one os the Fast Ethernet ports as WAN port for internet.
View 2 Replies View Relatedi have a Dell inspiron 1520, the ethernet port has stopped working- no lights when cable connected. this was fine and then just stopped, it is used to connect to hub from time to time when wifi goes down. have tried 3 different cables, no joy, these all work in another laptop. No issues shown in control panel/ hardware. Have downloaded driver from Dell site, still nothing.
View 1 Replies View RelatedI am trying to run a server for minecraft, which some of you may know primarily uses Port 25565. I have tried everything that I've seen suggested. I have a Linksys WRT54GS router that I have my 2 xboxes, playstation 3, pc, and wii connected to. Now, I don't use any of these components at the same time. I had an issue with my xbox and the game "Black Ops", where my NAT type was strict, but a microsoft support technician walked me through port forwarding for the xbox, and it worked. My NAT type was displayed as "open" now. This is not the case with Port 25565 however, as even though I've port forwarded 25565 to my static IP i set up for my PC (which is my server PC), Port checking sites such as "Yougetsignal" and a couple of others are still showing no connection for the current external IP and Port 25565.
I went through ipconfig in windows "cmd" and made sure I had all the ip's and subnets and dns' and whatnot correctly entered in my routers configuration page. I went into Windows firewall and put new rules for port 25565 into incoming rules. None of this seems to work. I even shut off the firewall completely (temporarily, mind you), just to eliminate that possibility, to no avail. Still getting negative responses from these sites. I am able to log into my server myself, using "localhost" as the address, but none of my minecraft buddies can get on my server. I've also tried to use Hamachi to set up a server, which doesn't need ports to be forwarded, but although they can join my hamachi network, they can't join the server. Obviously there is more of a problem than just not being able to open ports, and I am at a loss.
Also, I am aware that my external IP, given by my ISP, will change with every disconnect and reconnect of my signal. I got my current IP address during this time and gave that to my buddies so they could join the non-hamachi network. For the Hamachi server I edited my Hamachi network IP into my server software's properties file, where as it would be left blank for my non-hamachi server.
I got burned after purchasing a 3TB WD 3.0 USB hard drive that I can not use on my current E3000 or the their latest E4200. At least support knew that answer fairly fast. My bad for not taking the time to think I would have to search this website to find the short list of external USB drives that will work with the E3000.All I wanted to do was store my media files on a shared network drive. I am cheating the system now and using a shared drive on the main PC. The whole point of my project is not to have the main PC running to share media.So before I go scrap this 60 day old router, using WDs My Life 2TB ETHERNET connection external HD? Does actually have one of these drives installed on a E3000 using win xp pro? I did search high and low here, but could not find a list of acceptable external Ethernet drives or size limitations.Burnt once, lesson learned, will not get burnt again.
View 9 Replies View Relatedlost wireless to all wireless devices (laptop, iPhone and iPad). Still have hard wired ethernet internet access from desktop. Tried resetting router, powering off router, resetting and powering off cable modem. Nothing works. Lights on router all on.
View 1 Replies View Related