Cabling / Cards :: Ethernet Port Not Working

Mar 5, 2012

I was having a cleanup of the desk and unplugged the cable shortly, and after plugging it back in it could no longer find any connection. The only way I seem to be able to get connected to the internet now is to run a cable to my ethernet switch, and then onwards to my computer itself. Even when doing this the net seems to be very slow, won't connect through Chrome etc or just flat out won't connect.

View 5 Replies


ADVERTISEMENT

Cabling / Cards :: Dell Inspiron 1520 - Ethernet Port Has Stopped Working

May 30, 2011

i have a Dell inspiron 1520, the ethernet port has stopped working- no lights when cable connected. this was fine and then just stopped, it is used to connect to hub from time to time when wifi goes down. have tried 3 different cables, no joy, these all work in another laptop. No issues shown in control panel/ hardware. Have downloaded driver from Dell site, still nothing.

View 1 Replies View Related

Cabling / Cards :: CAT5 Ethernet Cables Not Working

Jul 14, 2011

I live in a frat and I am currently researching how to design and configure the most efficient network for the house. However, one of the other big problems we have is connectivity of our ethernet cables. We have an IT room with 2 switches that feed ethernet cables to all parts of the house and connect to an ethernet box in the wall where we can simply wire in our internet connection. We have wireless routers too but to keep the bandwidth usage across the WAP's I want to let people use the wired connections. However, many of the connection in the house do not work at all. I plug in my laptop to the wall jack and it gives me the No Internet Access notice. I don't understand why it works in some rooms and not others. All jacks seem to go into the same switches at the other end so I cannot figure out what the problem could be.

View 2 Replies View Related

Cabling / Cards :: Ethernet Not Working On Acer Aspire 2930z?

Oct 4, 2011

I have a acer aspire 2930z laptop. My uncle bought it a couple of weeks ago and I finally got my hands on it. But I found out that its internet is not working. When I connect it to my wifi it works fine. But when I cpnnect it to a broadband the net doesn't connect. Man I wanted to use it through boradband as my broadband is faster than my wifi.

View 9 Replies View Related

Cabling / Cards :: Aspire 7551 -windows 7 - Ethernet Stop Working?

May 27, 2012

Perhaps once a week my ethernet port stops working. That is, it is still displayed as 'working properly' in the device management screen, but it is unable to connect to dns. System restore does not solve this problem. plugging the ethernet cable in and out (10 times) does not solve this problem. Modem reset does not solve this problem either. I decided that perhaps ethernet controller is faulty, or perhaps the ethernet port in itself- so I bought a 'usb to ethernet' adaptor and surprisingly the internet connection problem persisted (during the instances when my laptop ethernet port had problems connecting to DNS, the adaptor was also unable to connect to internet).

What does solve this problem is this: I have another notebook - I plug the ethernet cable into that computer. Obviously, internet works without any problems with my second notebook. After that, I plug the ethernet cable back into the laptop which is now unable to connect to DNS. Quite often the Not being able to connect to DNS issue still remains the first time I do this, so I have to connect ethernet cable back into my second notebook and then plug it back into the notebook with a connectivity problem. After I do this 2 or 3 times, my windows 7 laptop is finally able to connect to internet.

View 3 Replies View Related

Cabling / Cards :: Cat 5e Versus Cat 6 For Gigabit Ethernet

Apr 10, 2012

I'm going to be upgrading my network (router and network cards etc). I was wondering if there will be any performance difference with the Belkin Fastcat 5e I currently have and CAT6 cables?

View 7 Replies View Related

Cabling / Cards :: Can't Detect Ethernet Cable?

Sep 7, 2011

I'm having an issue with my network adapter. It's not detecting the Ethernet cable, thus not able to connect to my home network. The trouble shooter (Windows 7 home 64) says it canning detect the cord. But the cable works fine on my other computer. The network adapter is a Nvdia nforce networking controller. All the drivers are up to date. The computer was completely formatted so it's a blank slate

View 8 Replies View Related

Cabling / Cards :: Cannot Connect To Internet Using Ethernet Cable

Apr 3, 2012

I can connect to the internet using my neighbors wireless router but when I try to use my ethernet cable it connects me to "network 16" but the internet doesnt work. Ive tried different cables and different wall ports and that didnt work. It has been working before but I disconnected it to go somewhere and when I came back I had this problem. I use Windows 7 and Im trying to connect using Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller.

View 8 Replies View Related

Cabling / Cards :: Ethernet Connection Error Code 28

Sep 13, 2011

Well I did something stupid (big surprise) and somehow managed to uninstall something related to the ethernet ports. I get code 28 and a yellow question mark with a little yellow circle with a black,Anyways what do I need to do to fix this, attached details from everest. It's probably something as simple as reinstalling the drivers, but buggered if I can figure out which ones I need.

View 1 Replies View Related

Cabling / Cards :: Can't Connect To Internet With Ethernet Cable?

Jul 24, 2011

i reformatted my computer 1 month ago, when i try to connect with ethernet cable it doesn't connect, but when i use the usb cable which i got with my modem it connects.btw i have a acer e389 which runs on XP(media center).

View 9 Replies View Related

Cabling / Cards :: Slingbox PRO Not Receiving Ethernet Signal

Oct 8, 2011

They have a main Verizon router in their bedroom, which is hard wired to a wireless router in the TV room. The have another cable router (not wireless) and it can receive a signal when you plug an Ethernet cable from output #1 on the wireless router to Internet input on the cable router (the Internet light lights up, meaning it's receiving the signal). Also the wireless router light for output #1 lights up (meaning it's outputting a signal correctly). But, when I plug the same cord into the Slingbox PRO, the network light, on the Slingbox PRO, doesn't light up, nor does the #1 light on the wireless router. The Slingbox is out of warranty.

View 19 Replies View Related

Cabling / Cards :: Cannot Connect To Internet Through Ethernet Cable

Dec 12, 2012

Ive been using an Ethernet cable to connect to the Internet for a while now, it was working fine up to yesterday where I left my desktop open for a few hours and came back to find that I have no Internet connection.

I used my laptop to test the cable out and it works fine, the wireless works fine too. There doesnt seem to be anything wrong with the modem since I still have Internet on the PS3. I used a different cable to test the modem again with my laptop and I had internet access. The desktop is still connected to the modem but it only gives me a network connection with no Internet.

I tried restarting the modem but it still wouldnt work and I also tried to disable then enable the connection.

Im using Realtek PCIe GBE Family Controller with the latest driver.

View 16 Replies View Related

Cabling / Cards :: Ethernet Cable Unplugged Message But It's Not

Apr 12, 2011

Can't log on to computer running win xp sp3. I'm getting message that ethernet cable is unplugged but it's not unplugged. The modem/router was installed by Verizon (for FIOS connection) in February 2011. Internet was working fine until a couple of days ago. I have looked at other posts on this issue but have found nothing that would solve the problem. My old dial-up modem was still installed in the computer and had a question mark on it in device manager so I removed it. I thought maybe there was an IRQ conflict as the modem used to use IRQ 11 and the network card (linksys) uses that sometimes as well as IRQ 10 but that didn't work.

View 19 Replies View Related

Cabling / Cards :: How To Join Two Broken Ethernet Cat 5 E Cables

Jul 12, 2011

One of our ethernet CAT5e is cut off (broken). Now I want to join them instead of putting new cable and doing thing all over again as it is too long.

View 2 Replies View Related

Cabling / Cards :: Computer Can't Detect Ethernet Cable?

Aug 3, 2012

Computer keeps saying that the I need to plug in a ethernet cable but I already did. This is happening on my Windows 7 Ultimate partition. I also have have a Mac OSX partition and the internet is working fine on that partition.Here is what I get for ipconfig/all command:[CODE]

View 18 Replies View Related

Cabling / Cards :: LAN Not Working?

Sep 17, 2012

i am using win7 64 bit on dell n5110 and my lan is not working properly. it wont even detect the cable . when i plug in the cable its like nothing happened. but when i uninstall and reinstall the driver, it sometimes resolves the issue. but i have to do this every time.

View 3 Replies View Related

Cabling / Cards :: HP Pavilion A1483w / Can't Connect Through Ethernet Cable

Sep 12, 2011

I am having a problem where I can't connect through a cable. I running on Windows XP SP2. My comp. is a HP Pavilion a1483w. I have just reformatted it.

View 3 Replies View Related

Cabling / Cards :: LAN Ethernet Controller Slow - Limited Connection

Oct 20, 2011

Network Adapter (as displayed in device manager) Realtek PCIe GBE Family Controller (says this device is working properly)I'm running my lan on the integrated network adapter "Realtek PCIe GBE Family Controller" on my motherboard. When I plug in the lan line directly from my router the speed on speedtest.net is around 2 Mbps, i have tested on 2 other computers and they all get around 10 Mbps with the same line. I build this new machine to play games, and sank $800+ on it. I am trying very hard to figure out why my LAN speed is so slow,

View 1 Replies View Related

Cabling / Cards :: Updated Ethernet Driver Caused Loss Of Connection

Mar 18, 2013

I recently updated my NVIDIA nForce 10/100/1000 mbps ethernet driver and now my computer wont connect to the internet. In fact, it doesnt even acknowledge that the ethernet chord is plugged in. I am running windows 7 and have had no problems for years now. Since ive had my PC for so long I decided it was time to update, now im at a loss of what to do. I am currently using my laptop to submit this post, as my PC is not a wifi enabled device. I recall having this problem back when I first had this computer made and found a resolution online, (cant seem to find the same site i used back then.) I recall that it had something to do with me using the command prompt. While i have been looking for an answer, I have tried the following with no avail:

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log press enter
Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log press enter
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog press enter

Restart the computer after.

View 1 Replies View Related

Cabling / Cards :: Cannot Connect To Internet Via Ethernet - Microsoft 6to4 Adapter Not Showing

Feb 12, 2011

have had a new HP G62-234DX laptop for about 4 months now and I'm now having problems connecting to the internet via ethernet. The lights do not come up when I plug it into the port and I have already tried to download the Ethernet driver from HP but it didn't seem to install properly, tells me it only works for Windows Vista which isn't true. I checked my device manager also and saw that I only have my wireless network adapter showing which works fine because I've been connecting wireless but I need a wired connection when I do not have wifi at my university. On device manager I chose 'show hidden devices' and I saw an unnecessary amount of "Microsoft 6to4 adapters" come up which does not seem right.

View 2 Replies View Related

Cabling / Cards :: Belkin N+ Wireless USB Adapter / Can't Connect To The Internet With Ethernet Cable

Jan 30, 2011

Everytime i plug the cable into my PC it doesn't detect it and the helper says to insert an ethernet cable.When I go to network sharing centre and check my connections it says network adaptor unplugged.im using wireless at the moment.My pc is a packard bell ipower x9810. it was windows vista but i upgraded to windows 7, i checked the packard bell website and can't find any networking adaptors. I have also checked device manager and it says - Belkin N+ wireless USB adapter #4 NVIDIA nForce 10/100/1000 Mbps Ethernet. there is no yellow exclamation mark.

View 17 Replies View Related

Cabling / Cards :: Network Card Stopped Working?

Jun 29, 2012

I have install a new driver for the network card but the card stops working?

View 1 Replies View Related

Cabling / Cards :: CAT6 Cables Suddenly Not Working?

Dec 11, 2012

Recently encountered this problem where one cable suddenly not working properly.We are using 568B as our standard cabling here, lines 1,2,4,and 5 are working as of checking,but lines 3,6,7, and 8 are not. Before it was working flawless. The cable are buried underground inclosed in a pvc hose.

View 11 Replies View Related

Cabling / Cards :: Cat5 Not Working Past 25Ft

May 22, 2012

We are setting up a network in our new house. We have the internet entering the garage. From there we have a 60 ft Cat 5 cables run through the crawl space. Orginally we had the wireless router attached to the end of the cat 5 and then attached to the computer. We could not get a connection through this wire. We then took out the cable, and ran a new one, same issue. We took the same cable, cut it down to 25 feet, installed the router in the garage and we have an excellant connection. We then ran a new wire through the crawl space from the router. Same issue, no connectivity. Taking that cable out, cutting it down we ran the wires from the router to our computers in the garage. why a Cat5 cable would not work at 60Ft.?

View 6 Replies View Related

Cabling / Cards :: Atheros AR5007EG WLAN Not Working

May 15, 2011

Up until a couple of days ago, I could connect to a wireless network no problem. Now, it's as if wireless doesn't exist on my netbook.

Computer: Acer Aspire One Model: ZG5 / AOA150
OS: XP, Service Pack 3
WLAN/Driver: Atheros AR5007EG/v7.6.0.224

I've done the Recovery Console and performed the Windows Registry repairs. I've even reformatted the computer, but to no avail at all. And I've done all the basic troubleshooting and surfed forums for way too long and found no solutions.

So this is kind of a last ditch effort. It still connects to the internet via an ethernet cord, so all is not completely lost, but it kind of defeats the purpose of having a netbook without having wireless connectivity.

View 6 Replies View Related

Cabling / Cards :: Laptop Not Working When Desktop Is Connected

Jul 29, 2011

My Internet connection works completely fine when all I have is my laptop connected to the wifi, but when my desktop also connects to the internet, than my laptop's internet doesn't work at all until i shut the desktop down.

View 2 Replies View Related

Cabling / Cards :: Wireless Card Only Working On Second Boot Up

May 5, 2012

I built a computer a while ago, from a reasonably low budget. Ever since the very first boot up, the wireless card (TP-Link, unable to find model currently, will add later) only works on the second consecutive boot up. I have no idea why, I have not found anything relating to a problem like this, the computer doesn't even appear to know that there is a wireless card in it. Instead the icon shows a cable, suggesting that the computer isn't connecting with the card.

View 5 Replies View Related

Cabling / Cards :: IEEE 802.11g Wireless PCI Adapter Not Working

Jun 19, 2011

I just purchased a wireless PCI Adapter and I cannot seem to get it to work. The box states it is an Excel IEEE 802.11g Wireless PCI Adapter. I have inserted it into the appropriate slot and when I start up Windows the device driver states that it has not installed correctly.The device driver is: Marvell Libertas 802.11b/g Wireless LAN Client Adapter. On my device manager list it has an error tag and when opened it comes up with the following message:This device cannot start (Code 10)I have tried to update the device, but I still get this error message and I have attempted to download new drivers off the internet but am unsure about what I am doing.

View 7 Replies View Related

Cabling / Cards :: One LAN Port Using A Static Ip And DHCP

Feb 22, 2012

I have my boss's (president of the company) laptop, wired LAN port, setup with a static ip so his laptop will bypass his company's web filter, and was going to let him use the wireless for home and travel. However, what if he needs to use his LAN port on a different network that doesn't support the ip's of our company's network? I need to see if there is a way, utility, or something that can be done to allow him to have a static ip assigned to that port and use DHCP (for when he is on other networks) so he can bypass the web filter.

I have a rule on the FW to allow his static ip to bypass the web filter. I have tried the alternate configuration inside XP and editing the registry to assign that nic dual ips, but I still get blocked on the filtered webpages. For now I have just emailed him the steps on how to switch it manually.

View 4 Replies View Related

Cabling / Cards :: Converting RJ45 To USB Port?

Dec 14, 2011

I have an old 2007 model Toshiba HD LCD television. It does not have a USB port, but it does have a connection for RJ45. I want to convert this to a USB port, Is there a converter/connector for this purpose?

View 3 Replies View Related

Cabling / Cards :: LAN Not Working Correctly In Sony Vaio Vpceb24en?

Feb 2, 2013

The internet connection on my laptop does not work correctly when connected to lan ,but it works fine for the WIFI.i checked the internet connection ,it works fine in other computes.most of the time the connection through lan is not recognized. sometimes it works fine for 1 day and does not work for another day.

View 8 Replies View Related

Cabling / Cards :: 802.11 B/g USB Wireless Adapter Randomly Stops Working

Sep 3, 2012

I've been using an 802.11 b/g USB wireless network adapter card with my computer to use in conjunction with an AT&T 2Wire router,which is about 20 or 30 feet away off in another room.After about 10 minutes on average, the adapter will stop transferring data suddenly, and it will stay that way for a while. If I do nothing, then sometimes it will start up again after several more minutes, but instead of waiting, I usually will select "Repair" from the Wireless Network Connection pop-up menu, which also works to get it started again. The problem though, naturally, is that after another little while, like about 10 minutes again, it will short out all over again. Sometimes, very rarely, it will stay working for up to maybe an hour, and sometimes, it can short out yet again within a few seconds.

View 9 Replies View Related

Cabling / Cards :: Netgear WG11v3 - Wireless Internet Isn't Working

May 10, 2012

Wireless internet isn't working. The drivers aren't installed, and it never came with a cd so the only way I can install them is if i connect to the internet which i cant. I am thinking i need to download the drivers to a disk drive and then transfer them. Another possibility is, i somehow have a rogue virus on my computer ( probably julia who ruins everything )anyways it's called pc optimizer pro. I don't have an internet so i cant get any programs, but i got hijack this and TFC malware bytes and zone alarm security already on my computer.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved