Cabling / Cards :: Belkin N+ Wireless USB Adapter / Can't Connect To The Internet With Ethernet Cable

Jan 30, 2011

Everytime i plug the cable into my PC it doesn't detect it and the helper says to insert an ethernet cable.When I go to network sharing centre and check my connections it says network adaptor unplugged.im using wireless at the moment.My pc is a packard bell ipower x9810. it was windows vista but i upgraded to windows 7, i checked the packard bell website and can't find any networking adaptors. I have also checked device manager and it says - Belkin N+ wireless USB adapter #4 NVIDIA nForce 10/100/1000 Mbps Ethernet. there is no yellow exclamation mark.

View 17 Replies


ADVERTISEMENT

Cabling / Cards :: Cannot Connect To Internet Using Ethernet Cable

Apr 3, 2012

I can connect to the internet using my neighbors wireless router but when I try to use my ethernet cable it connects me to "network 16" but the internet doesnt work. Ive tried different cables and different wall ports and that didnt work. It has been working before but I disconnected it to go somewhere and when I came back I had this problem. I use Windows 7 and Im trying to connect using Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller.

View 8 Replies View Related

Cabling / Cards :: Can't Connect To Internet With Ethernet Cable?

Jul 24, 2011

i reformatted my computer 1 month ago, when i try to connect with ethernet cable it doesn't connect, but when i use the usb cable which i got with my modem it connects.btw i have a acer e389 which runs on XP(media center).

View 9 Replies View Related

Cabling / Cards :: Cannot Connect To Internet Through Ethernet Cable

Dec 12, 2012

Ive been using an Ethernet cable to connect to the Internet for a while now, it was working fine up to yesterday where I left my desktop open for a few hours and came back to find that I have no Internet connection.

I used my laptop to test the cable out and it works fine, the wireless works fine too. There doesnt seem to be anything wrong with the modem since I still have Internet on the PS3. I used a different cable to test the modem again with my laptop and I had internet access. The desktop is still connected to the modem but it only gives me a network connection with no Internet.

I tried restarting the modem but it still wouldnt work and I also tried to disable then enable the connection.

Im using Realtek PCIe GBE Family Controller with the latest driver.

View 16 Replies View Related

Cabling / Cards :: Cannot Connect To Internet Via Ethernet - Microsoft 6to4 Adapter Not Showing

Feb 12, 2011

have had a new HP G62-234DX laptop for about 4 months now and I'm now having problems connecting to the internet via ethernet. The lights do not come up when I plug it into the port and I have already tried to download the Ethernet driver from HP but it didn't seem to install properly, tells me it only works for Windows Vista which isn't true. I checked my device manager also and saw that I only have my wireless network adapter showing which works fine because I've been connecting wireless but I need a wired connection when I do not have wifi at my university. On device manager I chose 'show hidden devices' and I saw an unnecessary amount of "Microsoft 6to4 adapters" come up which does not seem right.

View 2 Replies View Related

Cabling / Cards :: HP Pavilion A1483w / Can't Connect Through Ethernet Cable

Sep 12, 2011

I am having a problem where I can't connect through a cable. I running on Windows XP SP2. My comp. is a HP Pavilion a1483w. I have just reformatted it.

View 3 Replies View Related

Cabling / Cards :: Unable To Connect To Internet With TP-Link Wireless Adapter

Dec 27, 2011

Today I bought a TP-Link 150 Mbps Wireless PCI Express Adapter so I can pick up the internet connection in my house from my home PC. (We use a laptop most of the time which is able to pick it up fine).I've installed the wireless adapter into the computer and installed the drivers however I receive an error message:

"The device may not be present or could have been ejected/unplugged from the system. Insert of Reinsert Now."

View 13 Replies View Related

Cabling / Cards :: Belkin F5D8053 N Wireless USB Adapter Losing Connectivity?

May 18, 2011

I recently purchased a Belkin F5D8053 N Wireless USB Adapter after my 6 year old adapter was unable to see my home network in the network list.

I installed the software but the adapter wouldn't connect to my home network so I reinstalled and updated the driver, still wouldn't work. Finally about 2 hours later it just randomly connected. Now it has been frequently (1-2 times a day) losing connection to my home network for around 3 hours, it can see a dozen networks in the list with full signal strength but won't connect to any at all then connects to my home network again several hours later.

I have switched between the Windows connector and the Belkin one and tried all 6 USB slots with no luck. I contacted Belkin support and they told me to try the device on another computer and see if the problem still happens but I don't have another computer to test it with.

I suspect this is a problem with my Windows installation rather than the hardware or router as my old card would freeze once every couple of days and was only fixed by powering off my computer as Windows was unable to kill the process to restart it.

View 4 Replies View Related

Cabling / Cards :: Can't Detect Ethernet Cable?

Sep 7, 2011

I'm having an issue with my network adapter. It's not detecting the Ethernet cable, thus not able to connect to my home network. The trouble shooter (Windows 7 home 64) says it canning detect the cord. But the cable works fine on my other computer. The network adapter is a Nvdia nforce networking controller. All the drivers are up to date. The computer was completely formatted so it's a blank slate

View 8 Replies View Related

Cabling / Cards :: Ethernet Cable Unplugged Message But It's Not

Apr 12, 2011

Can't log on to computer running win xp sp3. I'm getting message that ethernet cable is unplugged but it's not unplugged. The modem/router was installed by Verizon (for FIOS connection) in February 2011. Internet was working fine until a couple of days ago. I have looked at other posts on this issue but have found nothing that would solve the problem. My old dial-up modem was still installed in the computer and had a question mark on it in device manager so I removed it. I thought maybe there was an IRQ conflict as the modem used to use IRQ 11 and the network card (linksys) uses that sometimes as well as IRQ 10 but that didn't work.

View 19 Replies View Related

Cabling / Cards :: Computer Can't Detect Ethernet Cable?

Aug 3, 2012

Computer keeps saying that the I need to plug in a ethernet cable but I already did. This is happening on my Windows 7 Ultimate partition. I also have have a Mac OSX partition and the internet is working fine on that partition.Here is what I get for ipconfig/all command:[CODE]

View 18 Replies View Related

Cabling / Cards :: Ar9285 - Wireless And Wired Adapter Will Not Connect To Network?

Oct 26, 2011

I have an hp g62 laptop and it has an Atheros ar9285 wireless adapter and a realtek pci-e ff ethernet adapter. For some reason just recently neither will connect to my netgear cable wifi router. I have two smartphones,xbox and two other laptops that connect with no problem. Everything is configured correctly that i can tell and both drivers have been updated. still nothing, it trys to connect but keeps saying identifying then it says no internet access. also i have disabled firewall and entered the security paraphrase twice just to make sure.

View 1 Replies View Related

Cabling / Cards :: 2 1gbps Lan Adapter Just Connect At 100mbps?

Apr 22, 2011

i've connected a laptop with "Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC" to a onboard NIC of Asus M4A89TD Pro wich is "Realtek 8111E Gigabit LAN Controller", which both support 1gbps but they will auto-negotiate at 100mbps.

View 5 Replies View Related

Cabling / Cards :: How To Connect CAT5e Cable To GE Wallplate

Dec 5, 2012

I am trying to connect CAT5e riser cable to a GE #76536 network and phone wall plate.The problem I am having is the CAT5e cable has 4 twisted pairs of wires as follows: blue/white, green/white, orange/white and brown/white. The wall plate connection has 8 distinct colors; blue, white, green, orange, yellow, black, red and brown. (or at least that's what they look like to me)None of the white wires from the CAT5e cable have any striping. They are all solid white. I've found color charts for matching striped wires, but I am at a loss to figure out how to connect these white wires to the proper terminals

View 7 Replies View Related

Cabling / Cards :: Belkin Connect N150 Router Has Solid Amber Light?

Oct 16, 2011

I have recently wiped my hdd and installed WinXp, I use to have vista but a crash occurred. I have WinXP SP3 with a Belkin Connect N150 connected to a Arris Telephony modem from Comcast. My setup use to work on vista. I've ran belkin setup from the disc multiple times and it gets to the part where it says connect and make sure cables are connected. All cables are connected, but my router has a solid amber light. I can access arris through wired internet, but I really want my wireless to work.

View 3 Replies View Related

Cabling / Cards :: (epson Cx6600) Connect A Printer To Router Using A Usb To LAN Cable?

Aug 15, 2011

I have a printer (epson cx6600) I wanted to connect to our router here so everyone can print to it. It only has a usb connector (which you would typically connect to your pc)... I did notice they have usb to lan cables out there and was going to buy one and connect it to the router that way.

View 1 Replies View Related

Cabling / Cards :: Can Connect A Cat6 Cable To A Cat5 Wall Jack

Jan 28, 2012

can i connect a cat6 cable to a cat5 wall jack

View 1 Replies View Related

Cabling / Cards :: Unable To Connect To The Internet Through Wireless Router

Jan 19, 2013

I am unable to connect to the internet through my wireless router. However, I can connect using neighbor's wireless connection and other laptops in my home are able to connect to the internet using MY wireless connection. The problem started suddenly, I used to be able to connect, then I had the problem so I rebooted and that resolved the issue temporarily. I tried disabling the wireless adapter card then rebooting, this did not work. I also unchecked the TCP/IPv6.

View 4 Replies View Related

Cabling / Cards :: Cannot Connect To Internet Wired Nor Wireless - Low Connectivity

Sep 12, 2011

[code]....

I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.

I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....

View 4 Replies View Related

Cabling / Cards :: Wireless Network Adapter Missing

Apr 11, 2012

PC experienced a 2sec power outage today and now the Wireless Network Adapter is missing from device manager. I've tried rebooting several times but no success.All other devices I have in the house can all connect to the router with no problems.

View 11 Replies View Related

Cabling / Cards :: IEEE 802.11g Wireless PCI Adapter Not Working

Jun 19, 2011

I just purchased a wireless PCI Adapter and I cannot seem to get it to work. The box states it is an Excel IEEE 802.11g Wireless PCI Adapter. I have inserted it into the appropriate slot and when I start up Windows the device driver states that it has not installed correctly.The device driver is: Marvell Libertas 802.11b/g Wireless LAN Client Adapter. On my device manager list it has an error tag and when opened it comes up with the following message:This device cannot start (Code 10)I have tried to update the device, but I still get this error message and I have attempted to download new drivers off the internet but am unsure about what I am doing.

View 7 Replies View Related

Cabling / Cards :: Vista Not Recognizing New PCI Wireless Network Adapter?

Jan 1, 2011

I am having similar problems on Vista. How is the driver installation different in Vista?

View 1 Replies View Related

Cabling / Cards :: No Wireless Network Adapter Installed And Configured

Apr 28, 2011

We moved to a different city and trying to access any available network but can't connect. Says no network found. I click diagnose and it says "This computer does not have a wireless network adapter installed and configured"

View 1 Replies View Related

Cabling / Cards :: 802.11 B/g USB Wireless Adapter Randomly Stops Working

Sep 3, 2012

I've been using an 802.11 b/g USB wireless network adapter card with my computer to use in conjunction with an AT&T 2Wire router,which is about 20 or 30 feet away off in another room.After about 10 minutes on average, the adapter will stop transferring data suddenly, and it will stay that way for a while. If I do nothing, then sometimes it will start up again after several more minutes, but instead of waiting, I usually will select "Repair" from the Wireless Network Connection pop-up menu, which also works to get it started again. The problem though, naturally, is that after another little while, like about 10 minutes again, it will short out all over again. Sometimes, very rarely, it will stay working for up to maybe an hour, and sometimes, it can short out yet again within a few seconds.

View 9 Replies View Related

Cabling / Cards :: Wireless-G Notebook Adapter (WPGC54G V1.2) Won't Work

Jan 17, 2012

So I can't seem to get anything to work lately... Sad that I can't even get a wireless adapter running now...

So this is a new Wireless-G Notebook Adapter(WPGC54G v1.2) I just got in the mail today. I went to the linksys/cisco website and they only have version 1, 2, 3, etc. Mine says 1.2 so I tried version 1. After installing and following all steps it said the software that connects was inactive.

After searching the internet a bit I found a thread stating v1.2 is version 2. So, I downloaded version 2 and ran that. Now the software isn't inactive but it doesn't "connect" in the linksys software, show any wireless devices, or do anything. I went into device manager and found the wireless card, updated drivers manually, and selected the folder I downloaded from linksys website to search for update drivers. It all ran fine and said drivers were installed. Still won't work. LINK light is not on card, POWER is.

Using a Toshiba Tecra 9000. So my last attempt... I uninstalled everything and stuck the card in and let windows recognize it. Selected manual install, went to the folder I downloaded for ver. 2 to search for drivers. Said everything installed and did drivers successfully but windows says "wireless network unavailable."

View 19 Replies View Related

Cabling / Cards :: Looking For A Wireless Network Adapter (USB Kind) For Windows 7

May 11, 2011

I was wondering what kind of wireless network adapter stick I should get for my windows 7 computer? My older one somehow had issues (device was not recognized or whatever)

View 4 Replies View Related

Cabling / Cards :: Can't Connect To The Internet Eee-PC?

Aug 1, 2012

I have an Eee-PC and im trying to connect to the internet via my HUAWEI E173 MOBIEL INTERNET STICKWhen I plug it in it reds it, but only like a mass storage device.

View 3 Replies View Related

Cabling / Cards :: Not Able To Connect To Internet

Apr 1, 2013

I have a fee pcs at home...all are able to connect to the internet but theres only one thats not able to...the network and connection centre keeps and changing from identifying to not connected. The cable itself is fine.

View 13 Replies View Related

Cabling / Cards :: New PC Won't Connect To Internet

Dec 30, 2011

I can open files, play videos, run programs, etc. Windows installed without a problem.However, I can't connect to the Internet. At all. I can't even register my version of Windows because I can't contact Microsoft for verification, because the connection won't get through. No Internet devices can be detected.That was with a long cable wired directly to our router, which is next to our modem.So, today, I bought a D-Link Xtreme N Desktop PCI adapter to connect. Still no connection... I don't think the PC even detects the adapter, because the drivers coming with the adapter can't detect it, and the light on the adapter doesn't turn on.That shouldn't happen. Both the cable and adapter go directly into the motherboard. My operating system is Windows 7 Ultimate 64-Bit, and my motherboard is an Asus P8Z68-V PRO.My ISP is Cogeco. All other computers and wireless devices in the house work perfectly fine.

View 2 Replies View Related

Cabling / Cards :: My Computer Usb Wireless Adapter Is Giving Slow Speed

Aug 25, 2012

I just brought this belkin wireless usb adapter N150 and it is giving me slow download speed. I checked on Speedtest.net - The Global Broadband Speed Test and it gives me 0.20 mbps it is not going to the max my max is 3.00 mbps it is not the wireless usb adapter because i checked on another computer and it went to the max 3.00 mbps and i putted it in the same location as my computer so than i realised that it was my computer that is giving slow download speed and it can't find much connections.

View 1 Replies View Related

Cabling / Cards :: TP Link TL-WN722N Wireless Adapter Refuses To Work On Windows 7?

Sep 7, 2012

I have a TP link TL-WN722N wireless adapter and it refuses to work on my win7 machine. I've tried installying the cd driver, all the relevant drivers on the TP link website, and the generic atheros driver. I've also tried manually installing all those drivers using device manager to no avail, and it says "a device attached to your system is not functioning"

But I know the physical adaptor is working because I was able to successfully install it onto another computer (it was a windows 8 preview version).

View 12 Replies View Related

Cabling / Cards :: Why Can't New Laptop Connect To The Internet

Aug 31, 2012

I just got a new laptop. Like, just yesterday, but for some odd reason it can't connect to the internet in the living roomMore Info:Laptop bought yesterday. Absolutely new. Samsung, A6 Vision, Windows 7. It can hold to 480GB I think or at least around and has 6GB Ram. I brought it home, made the default brower Google Chrome and connected it to the home internet and entered in the security key/password, so it's all connected. IN the living room, the connection is really good. All the other laptops there -even my really bad old one can connect fine to the internet. My new one says it's connected, but no internet. But since the other ones get internet, I don't think I need to restart the router -although I did so anyways and it didn't work

View 1 Replies View Related

Cabling / Cards :: XP Unable To Connect To Internet?

Mar 6, 2011

After pconfig /renew (I get this error) No operation can be performed on pth while it has its media disconnected. An error occurred while renewing interface local area connect an operation was attempted on something that was not a socket.

I am also trying to wipe it but no not have XP disc and no one I know does either so what is the safest way?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved