Cabling / Cards :: How To Join Two Broken Ethernet Cat 5 E Cables

Jul 12, 2011

One of our ethernet CAT5e is cut off (broken). Now I want to join them instead of putting new cable and doing thing all over again as it is too long.

View 2 Replies


ADVERTISEMENT

Cabling / Cards :: CAT5 Ethernet Cables Not Working

Jul 14, 2011

I live in a frat and I am currently researching how to design and configure the most efficient network for the house. However, one of the other big problems we have is connectivity of our ethernet cables. We have an IT room with 2 switches that feed ethernet cables to all parts of the house and connect to an ethernet box in the wall where we can simply wire in our internet connection. We have wireless routers too but to keep the bandwidth usage across the WAP's I want to let people use the wired connections. However, many of the connection in the house do not work at all. I plug in my laptop to the wall jack and it gives me the No Internet Access notice. I don't understand why it works in some rooms and not others. All jacks seem to go into the same switches at the other end so I cannot figure out what the problem could be.

View 2 Replies View Related

How To Join Two Ethernet Cables

Mar 20, 2011

How to I join two ethernet cables without using a switch ?They are same as cat5 cables right ?Is there some sort of adapter to connect two together ?

View 1 Replies View Related

Cabling / Cards :: CAT6 Cables Suddenly Not Working?

Dec 11, 2012

Recently encountered this problem where one cable suddenly not working properly.We are using 568B as our standard cabling here, lines 1,2,4,and 5 are working as of checking,but lines 3,6,7, and 8 are not. Before it was working flawless. The cable are buried underground inclosed in a pvc hose.

View 11 Replies View Related

Cabling / Cards :: How To Properly Label Network Cables

Oct 17, 2012

I work in a facility where not everyone communicates very well. Everyone seems to have there own method of labeling ethernet cables. We have several hubs (actually it is a cage with a patch panel and a cabinet with several switches containing over 200 ports) in this facility. The roof is supported by columns and the columns are number 1-35 from south to north and A-W from east to west. So the hubs are easily idientiyable by the column number that they are close to, but this is where the standard ends. Some people use the patch panel and port of the patch panel, some people use the server stack number and the port. What is the proper way to label these. Linking a website demonstrating this standard s I can print it off and share with others would be great.

View 1 Replies View Related

Cabling / Cards :: Ethernet Port Not Working

Mar 5, 2012

I was having a cleanup of the desk and unplugged the cable shortly, and after plugging it back in it could no longer find any connection. The only way I seem to be able to get connected to the internet now is to run a cable to my ethernet switch, and then onwards to my computer itself. Even when doing this the net seems to be very slow, won't connect through Chrome etc or just flat out won't connect.

View 5 Replies View Related

Cabling / Cards :: Cat 5e Versus Cat 6 For Gigabit Ethernet

Apr 10, 2012

I'm going to be upgrading my network (router and network cards etc). I was wondering if there will be any performance difference with the Belkin Fastcat 5e I currently have and CAT6 cables?

View 7 Replies View Related

Cabling / Cards :: Can't Detect Ethernet Cable?

Sep 7, 2011

I'm having an issue with my network adapter. It's not detecting the Ethernet cable, thus not able to connect to my home network. The trouble shooter (Windows 7 home 64) says it canning detect the cord. But the cable works fine on my other computer. The network adapter is a Nvdia nforce networking controller. All the drivers are up to date. The computer was completely formatted so it's a blank slate

View 8 Replies View Related

Cabling / Cards :: Cannot Connect To Internet Using Ethernet Cable

Apr 3, 2012

I can connect to the internet using my neighbors wireless router but when I try to use my ethernet cable it connects me to "network 16" but the internet doesnt work. Ive tried different cables and different wall ports and that didnt work. It has been working before but I disconnected it to go somewhere and when I came back I had this problem. I use Windows 7 and Im trying to connect using Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller.

View 8 Replies View Related

Cabling / Cards :: Ethernet Connection Error Code 28

Sep 13, 2011

Well I did something stupid (big surprise) and somehow managed to uninstall something related to the ethernet ports. I get code 28 and a yellow question mark with a little yellow circle with a black,Anyways what do I need to do to fix this, attached details from everest. It's probably something as simple as reinstalling the drivers, but buggered if I can figure out which ones I need.

View 1 Replies View Related

Cabling / Cards :: Can't Connect To Internet With Ethernet Cable?

Jul 24, 2011

i reformatted my computer 1 month ago, when i try to connect with ethernet cable it doesn't connect, but when i use the usb cable which i got with my modem it connects.btw i have a acer e389 which runs on XP(media center).

View 9 Replies View Related

Cabling / Cards :: Slingbox PRO Not Receiving Ethernet Signal

Oct 8, 2011

They have a main Verizon router in their bedroom, which is hard wired to a wireless router in the TV room. The have another cable router (not wireless) and it can receive a signal when you plug an Ethernet cable from output #1 on the wireless router to Internet input on the cable router (the Internet light lights up, meaning it's receiving the signal). Also the wireless router light for output #1 lights up (meaning it's outputting a signal correctly). But, when I plug the same cord into the Slingbox PRO, the network light, on the Slingbox PRO, doesn't light up, nor does the #1 light on the wireless router. The Slingbox is out of warranty.

View 19 Replies View Related

Cabling / Cards :: Cannot Connect To Internet Through Ethernet Cable

Dec 12, 2012

Ive been using an Ethernet cable to connect to the Internet for a while now, it was working fine up to yesterday where I left my desktop open for a few hours and came back to find that I have no Internet connection.

I used my laptop to test the cable out and it works fine, the wireless works fine too. There doesnt seem to be anything wrong with the modem since I still have Internet on the PS3. I used a different cable to test the modem again with my laptop and I had internet access. The desktop is still connected to the modem but it only gives me a network connection with no Internet.

I tried restarting the modem but it still wouldnt work and I also tried to disable then enable the connection.

Im using Realtek PCIe GBE Family Controller with the latest driver.

View 16 Replies View Related

Cabling / Cards :: Ethernet Cable Unplugged Message But It's Not

Apr 12, 2011

Can't log on to computer running win xp sp3. I'm getting message that ethernet cable is unplugged but it's not unplugged. The modem/router was installed by Verizon (for FIOS connection) in February 2011. Internet was working fine until a couple of days ago. I have looked at other posts on this issue but have found nothing that would solve the problem. My old dial-up modem was still installed in the computer and had a question mark on it in device manager so I removed it. I thought maybe there was an IRQ conflict as the modem used to use IRQ 11 and the network card (linksys) uses that sometimes as well as IRQ 10 but that didn't work.

View 19 Replies View Related

Cabling / Cards :: Computer Can't Detect Ethernet Cable?

Aug 3, 2012

Computer keeps saying that the I need to plug in a ethernet cable but I already did. This is happening on my Windows 7 Ultimate partition. I also have have a Mac OSX partition and the internet is working fine on that partition.Here is what I get for ipconfig/all command:[CODE]

View 18 Replies View Related

Cabling / Cards :: HP Pavilion A1483w / Can't Connect Through Ethernet Cable

Sep 12, 2011

I am having a problem where I can't connect through a cable. I running on Windows XP SP2. My comp. is a HP Pavilion a1483w. I have just reformatted it.

View 3 Replies View Related

Cabling / Cards :: Ethernet Not Working On Acer Aspire 2930z?

Oct 4, 2011

I have a acer aspire 2930z laptop. My uncle bought it a couple of weeks ago and I finally got my hands on it. But I found out that its internet is not working. When I connect it to my wifi it works fine. But when I cpnnect it to a broadband the net doesn't connect. Man I wanted to use it through boradband as my broadband is faster than my wifi.

View 9 Replies View Related

Cabling / Cards :: LAN Ethernet Controller Slow - Limited Connection

Oct 20, 2011

Network Adapter (as displayed in device manager) Realtek PCIe GBE Family Controller (says this device is working properly)I'm running my lan on the integrated network adapter "Realtek PCIe GBE Family Controller" on my motherboard. When I plug in the lan line directly from my router the speed on speedtest.net is around 2 Mbps, i have tested on 2 other computers and they all get around 10 Mbps with the same line. I build this new machine to play games, and sank $800+ on it. I am trying very hard to figure out why my LAN speed is so slow,

View 1 Replies View Related

Cabling / Cards :: Updated Ethernet Driver Caused Loss Of Connection

Mar 18, 2013

I recently updated my NVIDIA nForce 10/100/1000 mbps ethernet driver and now my computer wont connect to the internet. In fact, it doesnt even acknowledge that the ethernet chord is plugged in. I am running windows 7 and have had no problems for years now. Since ive had my PC for so long I decided it was time to update, now im at a loss of what to do. I am currently using my laptop to submit this post, as my PC is not a wifi enabled device. I recall having this problem back when I first had this computer made and found a resolution online, (cant seem to find the same site i used back then.) I recall that it had something to do with me using the command prompt. While i have been looking for an answer, I have tried the following with no avail:

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log press enter
Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log press enter
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog press enter

Restart the computer after.

View 1 Replies View Related

Cabling / Cards :: Aspire 7551 -windows 7 - Ethernet Stop Working?

May 27, 2012

Perhaps once a week my ethernet port stops working. That is, it is still displayed as 'working properly' in the device management screen, but it is unable to connect to dns. System restore does not solve this problem. plugging the ethernet cable in and out (10 times) does not solve this problem. Modem reset does not solve this problem either. I decided that perhaps ethernet controller is faulty, or perhaps the ethernet port in itself- so I bought a 'usb to ethernet' adaptor and surprisingly the internet connection problem persisted (during the instances when my laptop ethernet port had problems connecting to DNS, the adaptor was also unable to connect to internet).

What does solve this problem is this: I have another notebook - I plug the ethernet cable into that computer. Obviously, internet works without any problems with my second notebook. After that, I plug the ethernet cable back into the laptop which is now unable to connect to DNS. Quite often the Not being able to connect to DNS issue still remains the first time I do this, so I have to connect ethernet cable back into my second notebook and then plug it back into the notebook with a connectivity problem. After I do this 2 or 3 times, my windows 7 laptop is finally able to connect to internet.

View 3 Replies View Related

Cabling / Cards :: Cannot Connect To Internet Via Ethernet - Microsoft 6to4 Adapter Not Showing

Feb 12, 2011

have had a new HP G62-234DX laptop for about 4 months now and I'm now having problems connecting to the internet via ethernet. The lights do not come up when I plug it into the port and I have already tried to download the Ethernet driver from HP but it didn't seem to install properly, tells me it only works for Windows Vista which isn't true. I checked my device manager also and saw that I only have my wireless network adapter showing which works fine because I've been connecting wireless but I need a wired connection when I do not have wifi at my university. On device manager I chose 'show hidden devices' and I saw an unnecessary amount of "Microsoft 6to4 adapters" come up which does not seem right.

View 2 Replies View Related

Cabling / Cards :: Belkin N+ Wireless USB Adapter / Can't Connect To The Internet With Ethernet Cable

Jan 30, 2011

Everytime i plug the cable into my PC it doesn't detect it and the helper says to insert an ethernet cable.When I go to network sharing centre and check my connections it says network adaptor unplugged.im using wireless at the moment.My pc is a packard bell ipower x9810. it was windows vista but i upgraded to windows 7, i checked the packard bell website and can't find any networking adaptors. I have also checked device manager and it says - Belkin N+ wireless USB adapter #4 NVIDIA nForce 10/100/1000 Mbps Ethernet. there is no yellow exclamation mark.

View 17 Replies View Related

Cabling / Cards :: Dell Inspiron 1520 - Ethernet Port Has Stopped Working

May 30, 2011

i have a Dell inspiron 1520, the ethernet port has stopped working- no lights when cable connected. this was fine and then just stopped, it is used to connect to hub from time to time when wifi goes down. have tried 3 different cables, no joy, these all work in another laptop. No issues shown in control panel/ hardware. Have downloaded driver from Dell site, still nothing.

View 1 Replies View Related

Cabling / Cards :: Broadcom NeXtreme Gigabit Ethernet Card Won't Make Wireless Connection From HP Desktop?

Oct 13, 2012

Have just acquired new used HP desktop running Windows Vista. System has a Broadcom NeXtreme Gigabit Ethernet card installed, which gets me to the internet OK when using a LAN cable from wireless router. But I can't make wireless connection. Vista tells me that I need a wireless network adapter.Am I missing something? Is it possible to change some settings to get the Broadcom card to go wireless? If not, what sort of adapter is needed, and is such adapter external or will it have to be installed in the system box?

View 3 Replies View Related

Ethernet Cable Not Recognized (not Broken)?

Sep 15, 2011

I have searched the forums and found that there have been others with the same problem as me,but none of the solution offered was working for me so I decided to start this thread.I have an Acer laptop that wont recognize my ethernet cable, it says that there is no cable connected.

View 1 Replies View Related

Connect Two Ethernet Cables Together?

Jan 1, 2012

i want to connect 2 ethernet cables together threw a wall jack but i dont want to wire it. Do they make a wall jack that you can just plug in each side

View 1 Replies View Related

Connecting 2 Ethernet Cables Using Coupler?

May 16, 2011

I had one straight through cable connecting one switch and a pc in my office. The cable is approx 90 metres in length. The cable has been cut in between by rat. Now can I join those 2 cables by a coupler, if so will it increase latency, what type of crimping is required, straight through or cross cables. I think 2 cross cables connected by a coupler becomes straight.

View 5 Replies View Related

Switch Between 2 Ethernet Cables 1 Computer

Jul 29, 2012

We have 2 internet providers and I would like to find some way to switch our 5 computers between the 2 internets without having to unplug the ethernet cables everytime someone wants to switch. Is there some type of switch we can buy for each computer to do this or is there no such thing?

View 8 Replies View Related

Difference Between Flat And Snagless Ethernet Cables?

Apr 27, 2012

I was looking for flat LAN cables so it would go under my door to the router located in another room. When I search for "flat ethernet cables" on Amazon, I get a bunch of results on "snagless" ethernet cables.

This is slightly cheaper than flat cables and it's from Belkin. Do the 2 terms mean the same thing (ie. flat/thin)?

View 2 Replies View Related

Ethernet Cable Unplugged Or Broken - Unable To Connect Internet?

Nov 30, 2011

I cant get a connection to the internet when i open up lan theres a red x when i diagnose lan it says to plug in ethernet cable ive done that but then it says it may be unplugged or broken i even changed the ethernet cable but same problem, so i figured its the driver but that says upto date however when i reinstall it says theres no network adapter installed, i havent installed anything recently and to besure it wasnt because of an microsoft update i even did a system restore

View 12 Replies View Related

ZyXEL Modem / Router Does Not Detect Ethernet Cables

Jul 28, 2012

My ZyXEL modem/router does not detect my ethernet cables. it has one that runs to the main computer and i have a cable connected to my xbox. the light does not turn on when i try to use the internet for my xbox and the xbox does not detect ethernet. the other port works fine for the computer.

View 1 Replies View Related

How To Remotely Locate Wireless Router Using Ethernet Cables

May 23, 2012

Can I remotely locate my roommates wireless router from next to my desktop's modem using 50' ethernet cat 6 cables, and will unshielded cables suffice? Will the 50' from modem to router and 50' router back to desktop ( total of 100') noticeably degrade the signal my desktop receives?

View 1 Replies View Related

Zyxel - Ethernet Cable Portal On Laptop Broken / Cannot Access Internet

Jun 20, 2012

I do not have access to internet (I'm on some unsecured internet from around here now, very slow). When I start the internetdiagnostics from windows, he says it's the modem or the connection from laptop, router, modem to internet. However, the lights indicating internet and dsl on the modem are brightly burning and the router shows nothing abnormal too.

I have a WPA2-PSK security, the modem is Zyxel. Also, the ethernetcable portal on my laptop is broken, so I can't do anything non-wireless. My phone has the same problem with this internet, it can get a connection, but no internet.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved