Zyxel - Ethernet Cable Portal On Laptop Broken / Cannot Access Internet
Jun 20, 2012
I do not have access to internet (I'm on some unsecured internet from around here now, very slow). When I start the internetdiagnostics from windows, he says it's the modem or the connection from laptop, router, modem to internet. However, the lights indicating internet and dsl on the modem are brightly burning and the router shows nothing abnormal too.
I have a WPA2-PSK security, the modem is Zyxel. Also, the ethernetcable portal on my laptop is broken, so I can't do anything non-wireless. My phone has the same problem with this internet, it can get a connection, but no internet.
View 3 Replies
ADVERTISEMENT
Nov 30, 2011
I cant get a connection to the internet when i open up lan theres a red x when i diagnose lan it says to plug in ethernet cable ive done that but then it says it may be unplugged or broken i even changed the ethernet cable but same problem, so i figured its the driver but that says upto date however when i reinstall it says theres no network adapter installed, i havent installed anything recently and to besure it wasnt because of an microsoft update i even did a system restore
View 12 Replies
View Related
Aug 26, 2012
The detected problem is the connection between my access point, router, or cable modem and the Internet is broken.The network gateway is accessible, but Windows couldn't receive network traffic from the Internet.All other devices (iPad, Xbox, android phone) have no problem connecting to the Internet.Desktop is the only one experiencing the connection issue.
View 1 Replies
View Related
Jan 31, 2012
My laptop died last week and have been using my husbands, which I hate! We had some issues with computer freezing on some webpages or after being on webpages for awhile (like facebook). Yesterday it froze and I could not get it back on. When he got home he did scan disk (which I also did) and got it working after going into safe mode and doing system restore. He said an update had gotten through and messed things up. Anyhow, after he was on it a few hours last night, we lost connection. I figured the crazy weather was the culprit but it has been off all day. Our router is working and connecting but the adapter is not. Also our home phone says there is no line. We have unplugged everything several times, checked to make sure everything is in the right spots, I have even reset the router and rebooted the adapter. I uninstalled and restalled the adapter also. It is now telling me that "the connection between your access point, router, or cable modem and the Internet is broken". The only lights I have on the adapter are power, battery, DS and now the US light is blinking. The online and link lights are not on.
View 3 Replies
View Related
Sep 15, 2011
I have searched the forums and found that there have been others with the same problem as me,but none of the solution offered was working for me so I decided to start this thread.I have an Acer laptop that wont recognize my ethernet cable, it says that there is no cable connected.
View 1 Replies
View Related
Sep 15, 2012
Just recently got a Zyxel VSG1432 router connected to the main computer in my home. I am now trying to connect my laptop wirelessly. It will connect to the router but says it is an unidentified network and it doesn't connect to the internet. There is an x in the network and sharing window.I have tried restarting the router, going to the router webpage and resetting to factory settings, none of this worked. Also contacted the service provider and spoke with two tech guys, but still no luck.
View 1 Replies
View Related
Jul 1, 2012
I have an Acer aspire one netbook, model D255 which operates on Windows 7.Having trouble connecting to wifi connections. It worked fine initially, I tried turning the wifi switch on and off, it tells me that there are no wifi connections available, however everyone else Is able to connect via Wifi on their computers and myself without a problem on other devices.On troubleshooting it's says - that an Ethernet cable is broken or not plugged in properly, and is unable to fix the problem, as obviously I am not connected via any cable.I looked in network and it says that the Ethernet cable is unplugged and does not show any available networks.
View 10 Replies
View Related
Jul 13, 2011
I have an hp G60 series laptop but i have trouble connecting to internet using Ethernet cable
View 5 Replies
View Related
Sep 19, 2012
I have just arrived at a friends house to stay for a while and my laptop does not connect to the internet properly through the wireless yet works perfectly when plugged into the router directly through ethernet cable. it is not the actual router's wireless that is broken because there are three other laptops that connect and work just fine.I have done several virus scans using AVG and Spybot Search and Destroy and other than incredibar nothing has been found so i dont think it is a virus. I thought it might have been the 6to4 adapter so i disabled to no avail.The problem is not connecting to the network as that works fine and every now and again i can get 10 minutes of internet use before it stops working. most of the time still saying i am connected to the internet for an extra 5 minutes then saying i have a local only connection[CODE]
View 1 Replies
View Related
Jan 31, 2012
I have an HP laptop (vista) and I can connect to the internet when I use the ethernet cable but when I don't have the ethernet in, it just says that it is an unidentified network and an only connect locally. I have run an ipconfig/all and this is what I get:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Laura-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]...
The router is a HUAWEI EchoLife HG521?
View 4 Replies
View Related
Jul 18, 2011
I have a Dell Inspiron N4010, recently it has not been connecting to any wireless network, not at work, school or home! I troubleshoot the problems and it states that I have plug in Ethernet i don't know why it will not connect without it, I bought this laptop only 5 months ago!
View 4 Replies
View Related
Apr 13, 2011
I am trying to bridge internet connection received from my laptop to my desktop with an ethernet cable. Both machines are running win 7.When I try to connect to my local area connection on the desktop most of the time it fails and I'm left with 'Unidentified network' and no internet connection. Sometimes, rarely it does connect properly but I get a notification about there being an IP conflict in the network, but things work as they should.When I diagnose the problem it tells me that "Local Area Connection doesn't have a valid IP configuration"
View 5 Replies
View Related
Dec 9, 2012
I have a Dell Laptop Latitude 610 and I have not been able to connect to the Internet via the ethernet cable port for some four months now. I've tried downloading software from Dell's web site, I bought (and returned) and USB to Ethernet cable, only to find out that it was a model ahead of what this machine needs.I've asked local repair place (Microcenter) what it might be, but they'll only tell me after I pay $70 just to open it up.Another repair guy said that it is probably the motherboard and it wasn't worth fixing. (Yet if it was, wouldn't the entire computer decide not to work at all?) [code]
View 3 Replies
View Related
Jun 10, 2012
I have a desktop running windows XP Professional x32 SP3 and my network adapter is a Realtek PCIe GBE Family Controller. The desktop is connected to the network with an ethernet cable.Up until yesterday the internet connectivity just stopped working. I am seeing a very low number of received packets as opposed to the high number when it was working. It is showing that it is connected to the network but I still can't access the internet. Also I should mention that the desktop is at work and it is connected to a DHCP server that assigns IP addresses. I have updated all the drivers and I have used Winsock Fix and Netsh but it still isn't working. However the weird thing is that if assign a static IP address to it...it works. But I can't do this because I am not suppose to hook it up to the ports assigned to the switch for static IP's. It has to be connected to the DHCP switch. Why does it work when assigned a static but not if it gets an IP assigned by the DHCP server or switch. Also even if I try to reset, renew or release the IP...when I connect again it still gives me the same IP. It wont change.
View 1 Replies
View Related
May 5, 2013
Appended below are the following log files:
0. ipconfig /all 1. TechGuy SysInfo Log 2. HijackThis Log 3. attach log from dds.scr (note: this program did not create a file named dds.txt.) 4. ark log from GMER 5. FSS log from Farbar *************************************************************************** ********** 0. ipconfig /all Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:Documents and SettingsRick>ipconfig /all Windows IP
[code]....
View 3 Replies
View Related
Feb 20, 2012
I've been given a used Dell Latitude laptop and need to access the web to register Microsoft Office, which is currently unlicensed on my machine. I took the cable connector from the back of my PC and put it into the port of the Dell, hoping that that would be sufficient. However, it doesn't connect. The gubbins that is displayed for the local area connection status says something about 80 packets sent and only 8 received.
View 9 Replies
View Related
May 2, 2011
I know that WRTP54G is a voip device, but it is router as well and my problem is related to routing part.I cannot access public internet servers with IP in subnet 2.0.0.0 / 8 and 1.0.0.0 / 8. In the 2.0.0.0 / 8 subnet are some akamai cdn servers (yes, the fbcdn .After some time I've found, that routing table in wrtp54g contains also entries:
1.0.0.0 0.0.0.0 255.0.0.0 LAN&Wireless2.0.0.0 0.0.0.0 255.0.0.0 LAN&Wireless
which cannot be deleted. It looks like someone wanted to filter dark space when the router was developed.Is there any way, to get rid of it? I've restored to factory defaults, no change. Firmware version is 3.1.27.ETSI
View 9 Replies
View Related
Jul 1, 2012
in the past my laptop has been able to connect directly to the internet using an Cat5e cable, but recently when I have been trying to direct connect, I have been unable to, and not sure when the problem started because I always used WiFi and it worked great. I do a lot of messing around, not only with my network, but with my laptop settings also, so something might have gone bunko. I have done much troubleshooitng, such as trying to update drivers, checking to see if the hardware was disabled, etc...
View 1 Replies
View Related
Dec 25, 2012
I am going to use my ethernet cable to connect my pc to my xbox to use the PC as a bridge for the connection. My one question is, when I go to the adapter settings and go to the sharing tab on the properties of my wireless, what does the check box named 'Allow other users to connect through this computer's internet connection' do?
View 4 Replies
View Related
Sep 2, 2012
I recently moved into the dorms of my college and tried connecting my laptop to the internet using an ethernet cable. It worked, so I decided to try and play Xbox Live through the use of the ethernet cable and it did not work. After messing around with it and failing to get it to work for my Xbox 360, the ethernet decided to quit working for my computer as well. (To try and get my Xbox to connect to the internet with the ethernet cord, I tried network bridging by bridging the ethernet connection with the wireless connection, then unplugging the ethernet cable from the wall so as to connect it from my laptop to Xbox 360. This didn't work so I just deleted the bridge. This is when the problem started happening as the local connection stopped appearing.) I am able to plug it in and see that in the Network and Sharing Center, however, it shows up as being unplugged. After a couple seconds though, it disappears. If I click on it fast enough, it shows up with an Error Code 45 after looking at the properties. I have tried typing in ipconnfig /all and the ethernet connection doesn't show up there either.
View 16 Replies
View Related
Sep 6, 2011
laptop crash after connecting ethernet cable
View 1 Replies
View Related
Feb 23, 2013
I have a desktop computer for gaming and a laptop, but when I was assembling my desktop I didn't put in a wireless card thing so i've been able to get internet since by connecting my desktop and laptop (which has wireless) with an Ethernet cable and everything has been fine.Apart from a few days ago when it all stopped working, my laptop works fine as does my desktop but the desktop and laptop can't seem to connect anymore.
View 3 Replies
View Related
Feb 14, 2011
i have a DSL connection which is established using a dial-up (PPPoE) modem. I recently bought a wifi router, and I found that when I plug the cable to one of the LAN ports and the laptop, it seems as if it wasn't connected at all (not detected on either side).I tried to format the system running on XP and I installed windows 7 but the problem persists.The only thing I can think of right now is using a crossover cable, but I somehow doubt that it should work since I tried plugging the router to my netbook (using a normal cable) and it worked like a charm. But maybe the fact that it's a quite old laptop (PB MV51-101) has something to do?
View 8 Replies
View Related
Aug 3, 2012
i have a compaq laptop and for some reason my laptop doesnt connect to my router and internet wirelessly it can only connect successfully through an ethernet cable. When trying to connect wirelessly i am getting a local only connection.
View 4 Replies
View Related
Jul 30, 2011
i use a home pc and i want to connect to a laptop that needs cleaning out i have a etherrnet crossover cable and i am using windows 2000 pro
View 1 Replies
View Related
Jul 12, 2011
One of our ethernet CAT5e is cut off (broken). Now I want to join them instead of putting new cable and doing thing all over again as it is too long.
View 2 Replies
View Related
Jul 28, 2012
My ZyXEL modem/router does not detect my ethernet cables. it has one that runs to the main computer and i have a cable connected to my xbox. the light does not turn on when i try to use the internet for my xbox and the xbox does not detect ethernet. the other port works fine for the computer.
View 1 Replies
View Related
Nov 9, 2012
I have Lenovo laptop and my internet works just fine when the cable is connected but Wifi does not work. It shows that i have excellent signal on the side but it just wont connect. When i type in password it says " Windows cannot connect to XYZ ". I use Windows 7 and my wireless network adapter is Atheros AR9285.
C:UsersMY>IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : MY-PC
[Code]......
View 14 Replies
View Related
Sep 18, 2012
I took my samsung RV510 back to factroy setting and now have no wireless only works on ethernet cable
View 2 Replies
View Related
Jan 6, 2011
I have a new 2wire home portal that will not connect to my PC via Ethernet cable. However it will connect to my 2 laptops via the wireless connection. it would not make a wireless connection. but would via the Ethernet connection. How can I get the Ethernet connection working on the new portal?
View 5 Replies
View Related
Aug 10, 2012
I have an acer aspire 5552 laptop that wont connect to the internet. When I tried troubleshooting I get the message "network cable not properly plugged in or may be broken". When I go through the control panel/system devices/network adapter the only thing that shows is pdanet. Right now the only way I can connect is through my cell phone using pdanet. How can I get my network adapters to show back up?
View 1 Replies
View Related
Jan 20, 2012
Yesterday I was on my toshiba satelite L550-OCD and the wireless wasn't working then it started working again. I closed my laptop and when I went back to it it wasn't working again and hasn't since. It says there's no wireless connection to plug in Ethernet cable now I have tried Fn F8 and it doesn't do anything. So I went into my toshiba assist and opened optimize. Then toshiba hardware settings and clicked LAN and it says it's turned on. But when I click radar it shows it is not connected and the light is off.
View 6 Replies
View Related
Apr 28, 2013
Is there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.
View 1 Replies
View Related