Can I remotely locate my roommates wireless router from next to my desktop's modem using 50' ethernet cat 6 cables, and will unshielded cables suffice? Will the 50' from modem to router and 50' router back to desktop ( total of 100') noticeably degrade the signal my desktop receives?
View 1 RepliesI am trying to install my router but I keep getting the error message that my ethernet cables are not connected. I have tried several times and everytime I know that the cables are in correctly. Is there anyway to solve this problem?
I am running in XP and my router is WRT54G2.
ISP : Charter Communications
Modem : Motorola SURFboard SB6121
Router : Linksys E1200
I started out installed on the CD and then I kept getting messages about not being set up and finally it kicked me out. So I started out with the basics, changing out ethernet cables and checking connections. I then tried cycling the modem, router, computer and still no go. As soon as I plug the modem straight back into the computer it kicks back on. So then I tried some other trouble shooting ideas on the forums with the last being MAC address clone, save changes, release renew IP, and finally another round of cycling and I still can't get it to work.
My ZyXEL modem/router does not detect my ethernet cables. it has one that runs to the main computer and i have a cable connected to my xbox. the light does not turn on when i try to use the internet for my xbox and the xbox does not detect ethernet. the other port works fine for the computer.
View 1 Replies View RelatedI have two computers in the house which are linked by an ethernet cables, my wireless router only has one ethernet hole,so I would like to know what I need to buy? such as an adapter or something, so I can have two ethernet cables to connect to my router.the type of router I have is called a Hauwei echolite HG521 broadband wireless ADSL2+ router.
View 1 Replies View RelatedHow to I join two ethernet cables without using a switch ?They are same as cat5 cables right ?Is there some sort of adapter to connect two together ?
View 1 Replies View Relatedi want to connect 2 ethernet cables together threw a wall jack but i dont want to wire it. Do they make a wall jack that you can just plug in each side
View 1 Replies View RelatedI had one straight through cable connecting one switch and a pc in my office. The cable is approx 90 metres in length. The cable has been cut in between by rat. Now can I join those 2 cables by a coupler, if so will it increase latency, what type of crimping is required, straight through or cross cables. I think 2 cross cables connected by a coupler becomes straight.
View 5 Replies View RelatedWe have 2 internet providers and I would like to find some way to switch our 5 computers between the 2 internets without having to unplug the ethernet cables everytime someone wants to switch. Is there some type of switch we can buy for each computer to do this or is there no such thing?
View 8 Replies View RelatedI was looking for flat LAN cables so it would go under my door to the router located in another room. When I search for "flat ethernet cables" on Amazon, I get a bunch of results on "snagless" ethernet cables.
This is slightly cheaper than flat cables and it's from Belkin. Do the 2 terms mean the same thing (ie. flat/thin)?
I live in a frat and I am currently researching how to design and configure the most efficient network for the house. However, one of the other big problems we have is connectivity of our ethernet cables. We have an IT room with 2 switches that feed ethernet cables to all parts of the house and connect to an ethernet box in the wall where we can simply wire in our internet connection. We have wireless routers too but to keep the bandwidth usage across the WAP's I want to let people use the wired connections. However, many of the connection in the house do not work at all. I plug in my laptop to the wall jack and it gives me the No Internet Access notice. I don't understand why it works in some rooms and not others. All jacks seem to go into the same switches at the other end so I cannot figure out what the problem could be.
View 2 Replies View RelatedOne of our ethernet CAT5e is cut off (broken). Now I want to join them instead of putting new cable and doing thing all over again as it is too long.
View 2 Replies View RelatedUTP cables are crossover cables or straight through??
View 5 Replies View RelatedI cannot locate my security key for my wireless router. How can I find my own security key from my desktop or laptop?
View 1 Replies View RelatedSo the power light on my WRT54GS router is off but my LAN lights 1-4 and the WLAN light stay on when power is attached but no cables are in the ports.
View 4 Replies View RelatedI currently have an E1000 router set up on a 2006 Dell PC as main hub of a network that includes kids' 2003 Dell PC (with a Cisco Connect USB receiver plugged in because it has no wireless capabilities) and wife's Dell laptop. We're about to change main desktop computer to an iMac (2011 refurb, won't be running Lion which I know there's issues with as far as Cisco Connect), give the 2006 Dell to kids and get rid of the old 2003 box. I cannot locate my installation CD, I'm sure it's somewhere in our rather cluttered computer area, although I understand I can download what I need. This probably is a dufus question, and I apologize in advance, it's just not clicking in my mind, but basically am I going to have to go back to step one, just like the first day I set up the router, as far as setting up our network?
View 3 Replies View RelatedWhen I run the setup CD the router cannot locate the internet connection. I'm using a Motorola Surfboard modem. My local PC works fine on the internet. My remote wireless PC shows limited or no connectivity. I have switched out the Ethernet cables with no luck
View 5 Replies View RelatedI recently put in a surveillance system with remote access. I have an application on my android phone and it can be viewed by any browser. While I am connected to my network these functions work fine, on my phone and any desktop/laptop. The problem happens when I try to view remotely, off my network. I had this setup on my Netgear router before I got my new fancy schmancy Cicso router becaue the netgear wasn't cutting the cheese in keeping my wireless connectionstory.So here is what I got. I need 3 ports forwarded for this work, and how I got it work on my Netgear. I have these 3 ports forwarded as single ports. I have them forwarded in a range and I have port triggering turned on. No matter what or which combination of these few things I try, I can't access the DVR remotely, again unless I'm local to MY network.Some additional notes - the DVR has a static address and that address has been reserved in the DHCP settings of the router.
View 5 Replies View RelatedWork has an E3000 set up in the office. Is it possible to connect remotely (outside of office) through the internet and print to a printer that is wired into the E3000?
View 3 Replies View RelatedI recently bought a e4200 v2 and installed connect cloud. I have attached a USB drive to the router. I can connect to it by mapping a network drive on my windows 7 laptop. I can also access it as a media server through my iPad on the local wifi network. This way I can play the music on the USB drive through the iPad. The next thing I would like to accomplish is to be able to listen to the music on the USB drive through the internet (so remotely).
View 2 Replies View RelatedI have a WRT54G2 version 1 router. I want to access it via internet remotely. I have a static IP and I enabled Remote Management option. I tried to access it from outside my home network entering my router static IP followed by :8080 in web browser. The username and password window appeared. After entering the right username and pass I just get a blank page
View 2 Replies View Relatedtrying to stream movies from the USB drive pluged into EA4500 using 3G or remotely. I got Media Server (DLNA) turned on and FTP Server setup. I also setup Dynamic DNS. I can managed to see the media server on iPhoto using WIFI connection with UpnPPeek. I'm wondering if it is possible that any iphone apps like Air Video can be able to stream movie remotely without turn on the computer?
View 9 Replies View RelatedRegion : Egypt
Model : TD-W8961ND
Hardware Version : V3
Firmware Version :
ISP :
my router is placed in my home. i want to access to it with IE from my office.but no luck.also i try to ping the WAN ip address of the router.
I just switched to the EA4500 Router and I'm now unable to remotely access my camera devices. I have done the port forward. I can access the cameras from my local LAN both when using the local 10. ..and external 99 .. Addresses. When I go off the local connection - Access does not work. Slingbox did its auto configuration and I can access it. I just cant get to camera devices (Panosonic, Foscam, etc.).
View 3 Replies View RelatedI use the Smart Wi-Fi app on my iPad3 (IOS 6.1.3) to access my EA4500 remotely.When I want to add a port forwarding, it shows always 192.168 as start of the ip address related to the ports. But I have a 10.71 network installed and cannot change the 192.168 to 10.71. I suppose this is a bug.
View 2 Replies View RelatedI purchased some cameras for my building. I have them set up ok on port 85 but I can't view them remotely until I set up the router to forward the port. I have a charter modem and the E2500 router.
View 1 Replies View RelatedI'm the IT Manager for a Small Non-Profit Organization(facilitating build homes, giving education, health care for the poor).All computers are connected to a network through a Linksys E1000 Wifi Router and I would like to access all computers remotely especially when I'm on my site visits or when I'm not in the office. Is there a way for me to join the network even if I'm outside the office.
View 5 Replies View RelatedLinksys Router IP - How to Locate
View 1 Replies View RelatedI have new TP_LINK router, Model No. TL-WR1043N / TL-WR1043ND
And Its working fine most of the time but my problem or question is this, I play the WII online and its wireless through the router.I have a friend that is local in my town and we try to play online and it will never let us team up, and if we try it never lets us assign a host. I can play otherwise when i connect and search for a game in progress but if I send him an invite it will not let us team up and either host a game or join a game.
Ive done some research and Ive went in and add my WIIS MAC address into the DHCP and assigned it an IP address in the router and the WII, and it worked at first, we finally were able to join into a game on the same team, but its still not letting one of us host or, it keeps telling us unable to locate a host. Im wondering if I should put his MAC address in my DHCP and assign him a IP address?
Is it possible to log onto a router over the internet using a pooled IP address? I want to be able to manage some routers that are in different sites, these are just providing internet access to clients. these are 1801 and 877s
View 4 Replies View RelatedThere are two access points of Cisco AIR-AP1142 (4dbi, 2.4GHz). Settle down at height of 12 meters and at distance of 36 meters from each other. Whether will cover access points a zone on the earth in between? And on what distance on the sides?
View 2 Replies View Relatedi am trying to access my 02 router to access my cctv but my router will not allow remote access.
View 2 Replies View RelatedThe RG-59 coax cables that come with the 1310 bridge are only 1 foot long. where I could get longer cables as the power injector is quite a distance away because there are no close power sockets. Instead of installing new power sockets near to the bridge, we wanted to simply run longer coax cables.
View 3 Replies View Related