Linksys Wireless Router :: Remotely Accessing Office Network Connected To E1000
Jun 13, 2011
I'm the IT Manager for a Small Non-Profit Organization(facilitating build homes, giving education, health care for the poor).All computers are connected to a network through a Linksys E1000 Wifi Router and I would like to access all computers remotely especially when I'm on my site visits or when I'm not in the office. Is there a way for me to join the network even if I'm outside the office.
View 5 Replies
ADVERTISEMENT
Mar 19, 2011
I have a WRT54G2 version 1 router. I want to access it via internet remotely. I have a static IP and I enabled Remote Management option. I tried to access it from outside my home network entering my router static IP followed by :8080 in web browser. The username and password window appeared. After entering the right username and pass I just get a blank page
View 2 Replies
View Related
Dec 17, 2012
I am trying to configure access to several remote offices for users who VPN into our main datacenter. The datacenter has a 5520, and the branches are connected through IPSec L2L VPNs. Branches all have 5505 or 5510's. Remote users use IPSec via the Cisco remote Client. Remote access into our data center works, and the L2L VPNs are perfect...just now that i need remote users to access the branches after Remote access VPNing (for support) i cant get that part to work.
View 2 Replies
View Related
Feb 25, 2013
I want to acccess my office computer from Home PC.I have ZTE DSL Modem + Wireless Router and got new Static IP, so how to configure Static IP From BSNL.
View 3 Replies
View Related
Apr 10, 2012
I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!
View 3 Replies
View Related
Jan 8, 2012
One of my remote office router model is Cisco 2801. Unfortunately I forgot the telnet/vty password of that router. I am sitting 500 KM distance in between in the Head Office. I can ping the router but due to lost password I cannot login to the router. Moreover I dont have snmp enabled in that router. Is there anyway I can reset the router's password remotely from my head office. Additionaly I have a switch directly connected to the router and I can ping and login to the swtich but not the router. I am writing this about the switch or resetting the routers password anyway.
View 1 Replies
View Related
Jun 21, 2012
I have an Att combination Netgear modem-router that is painfully slow when accessing wi-fi gear remotely. Everything works great on the lan, but often times out on remote access over the internet.
View 3 Replies
View Related
Jan 18, 2012
I have DOCSIS 3.0 modem and a Linksys E1000 wireless router with which I get reults from SpeedTest of 8.6 mps down, 1.57 mps up up from 15 mps service from cable provider. Connected to modem via ethernet cable produces 16.0 speeds. Do I need to upgrade the router or are my settings wrong?
View 1 Replies
View Related
Sep 22, 2009
I work for a large company and want reinstall my wireless router so I move from room to room with my laptop without plugging into our network. I have had it set up before but had to spent an hour with tech support to configure the router. Recently I had to reset the password and lost all the settings.
I can get to logged into the set up with the default password but have no idea how to configure it. No matter what I try I get no conectivity when I try to redirect the browser to the internet.
Yeah, I know I should let our network IT staff set it up, but they get all bent when I want to extend my access to a wireless configuration even if it's password protected.
View 9 Replies
View Related
Feb 10, 2013
How to access remotely over the Internet to office PC from my home PC and get files that I need? Office's ADSL modem's model is BeWan iBox V1.0 and it has a built-in firewall. ADSL connection has a dynamic IP, which I assume should be configured as static (but how?) Should I investigate VPN capabilities as well? I'm not very knowledgeable about these things.
View 7 Replies
View Related
Aug 7, 2011
I've got the below setup, have the wrt320 setup as a switch / wifi ap, i'm totally unable to access its management page from pc1 but am able to via pc 3, why is this, how can i get around this? Routing? Also am unable to access pc3's resources from pc1..When i enter the ip of the wrt320 it thinks about it and before it has come up with the user/password screen but it soon dissapears and firefox comes up with a "Unable to connect Firefox can't establish a connection to the server at 192.168.0.2." message.
View 1 Replies
View Related
May 2, 2012
I'd like to use an E2500 as a wireless access point in my network. My computer is connected to the office network through a Netgear 5 port desktop switch. Would it be easier for me to configure the E2500 from the switch? If so, do I just plug it in there and access it via the 192.168.1.1 IP address to set it up? And lastly, what should disable (DHCP) or setup in the router so the internet functions through it?
View 8 Replies
View Related
Jan 15, 2013
I use vpn to connect to another organization from my office and on the same network where my printer resides, if i logon to the vpn printing to my local printer becomes a problem, I can also print to my local printer.
View 2 Replies
View Related
Oct 30, 2012
I have a Cisco network at my office and the router and everything is set up under my desk.I can use the internet just fine on my office computer but I am trying to use it on my laptop and login to the guest account .I ran across the Cisco Connect sofware and that I need it to find the password but the problem is I dont think I have a router or whatever it is that is compatible with this software I am using WRT54g wireless n router, the models on the site for the cisco connect are e series
View 1 Replies
View Related
Oct 31, 2012
Is there a way to get rid of the guest network on a E1000 or is it part of the setup.
View 1 Replies
View Related
Mar 30, 2011
I have a new Linksys E1000, and I would like to connect my HP 2035 Laserjet to the router, avoiding connecting it directly to my desktop (wired to the router) or my laptop (wireless). When I connect the Ethernet cable to the printer and the router?Both PCs are running XP, and the printer was connected to the laptop before I got the wireless router.
View 2 Replies
View Related
Dec 27, 2011
I'm trying to connect my Kindle to my wireless router. I cant find my password for my network. I have a Linksys E1000.
View 1 Replies
View Related
Jul 15, 2011
installed the E1000 router that AT&T provides with U-verse DSL. All works fine except that the device name that appears under "Network Infrastructure" in Windows 7 shows the original default name that Cisco assigned instead of the name I chose. It does not affect operation or performance but looks oddball. I don't see how it can be changed.
View 4 Replies
View Related
Apr 10, 2012
Linksys E1000 running on Window XP
Trying to access the internet with a dell laptop after my daughter messed with the router. She gave me the passowd but when I try to log in from the laptop that has never been logged on since the pw changed, I get a message that wants the network key. I have read several posts about getting the network key but didn't see a network key.I have cisco connect on a different computer and can access the details of the router but haven't found the network key. I can get to Wireless, Wireless Security and the security mode is WPA2/WPA. I can see the password but where is the network key?
View 2 Replies
View Related
Dec 25, 2011
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
View 2 Replies
View Related
Jun 29, 2012
I have a strange problem with my Linksys E1000. When I try to connect wireless, there is a network with an excellent signal, but it has the name "CiscoI1593" and it asks for a password which I don't know. My original network does not appear for some reason when I try to connect wirelessly. I do see my original network name when I use an ethernet cable through the E1000.
It's not possible, where I live, for this "CiscoI1593" network to belong to someone else, it just seemed like it renamed my network to this and also wants some different password.
I think this may be due to something I did. My internet occasionally cuts out and it's usually something wrong with the modem or router, so I typically unplug and press the reset button on both until it begins to work again. This is the first time i've had this problem though, and I have unplugged and pressed the reset button on my router many times.
There is also a button in the middle of the front of the router that looks like a refresh symbol, but I don't really know what it is, pushing it doesn't seem to do anything but make a solidly-on light become blinky.
View 6 Replies
View Related
May 11, 2012
i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
View 2 Replies
View Related
Oct 6, 2011
Ive run into something a bit new to me. Networking! Now i do have some experience but not enough for me to figure this one outHere is what i am trying to achieveWe have a webserver at the office which i can access from the outside world. We also have a local server with a static internal ip(File Server)My question is as follows can i add a link on a web page on my webserver to that i can access the internal ip address from outside the office?
View 13 Replies
View Related
Jul 17, 2011
Why is it that my netbook doesn't have internet access on my Private Network? But when I connect it to my Guest Network, it does have an internet access. It's the only device I have that doesn't have internet access on my Private Network. The rest are working. I tried all the possible options to connect a device but still the problem exist.
By the way, I'm using E-1000 v2.1.02
View 1 Replies
View Related
Aug 3, 2011
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
View 3 Replies
View Related
Apr 5, 2013
I have sent up a wireless network in a large building using WAG120N Modem Router and four E1000 wireless routers set as access points. The E1000's have the DHCP switched off to enable roaming so the WAG120N takes care of all that.
View 1 Replies
View Related
Aug 6, 2011
I am having a problem with my newly purchased Linksys E1000 router, I am having terribly slow network speeds while on that network.
Here are my network speeds with The e1000: (wireless) And here are the speeds with my old wrt54g: (Wireless) Here are the results directly hooked up to the modem: (wired)
I've tried setting the MTU to 1500, did a RMA with Linksys to see if it was a hardware problem, did a firmware update to the e1000, disabled DHCP and SPI, reseted my router and my modem....none of those things have worked
My ISP is comcast and I have a Arris TM502G modem
View 4 Replies
View Related
Jan 29, 2011
I have recently changed my ISP and as such now have a modem router from them, however I used to have a seperate modem connected to my own router that I have already set up to have port forwarding to my CCTV, DVR and networked storage (Built into exsistine router).Since connecting the new modem router to my exsisting router I have been unable to access the CCTV, DVR and Storage from outside my LAN.
I guess this is because the devices are on the client list of my old router and not on my modem router.Is there anyway I can access the old port forwards through the new modem router, it used to be a matter of just xxx.xxx.xxx.xxx:9966 for example but now this would try to access the modem router and not the router it's connected to.
I have not found any options to disable the router side of it to make it act as just a modem.The hardware is a Virgin Media Super Hub model connected to a D-Link Dir-685.For arguments sake the IP address of my D-Link is 192.168.0.1 and the Super hub is 192.168.100.
View 6 Replies
View Related
May 24, 2012
I recently put in a surveillance system with remote access. I have an application on my android phone and it can be viewed by any browser. While I am connected to my network these functions work fine, on my phone and any desktop/laptop. The problem happens when I try to view remotely, off my network. I had this setup on my Netgear router before I got my new fancy schmancy Cicso router becaue the netgear wasn't cutting the cheese in keeping my wireless connectionstory.So here is what I got. I need 3 ports forwarded for this work, and how I got it work on my Netgear. I have these 3 ports forwarded as single ports. I have them forwarded in a range and I have port triggering turned on. No matter what or which combination of these few things I try, I can't access the DVR remotely, again unless I'm local to MY network.Some additional notes - the DVR has a static address and that address has been reserved in the DHCP settings of the router.
View 5 Replies
View Related
Jun 11, 2012
Work has an E3000 set up in the office. Is it possible to connect remotely (outside of office) through the internet and print to a printer that is wired into the E3000?
View 3 Replies
View Related
Sep 19, 2012
I recently bought a e4200 v2 and installed connect cloud. I have attached a USB drive to the router. I can connect to it by mapping a network drive on my windows 7 laptop. I can also access it as a media server through my iPad on the local wifi network. This way I can play the music on the USB drive through the iPad. The next thing I would like to accomplish is to be able to listen to the music on the USB drive through the internet (so remotely).
View 2 Replies
View Related
Sep 28, 2012
One day I got a blue screen saying there was a hardware or driver failure with the network adapter on the motherboard. I couldn't resolve the problem so I went out and got a new network adaptor. Pluged it in, windows found drivers for it. But I was getting a Unidentified network problem.I have a Linksys E1000 router, internet works on my laptop and xbox360 fine wired and wireless. So I changed ports on the router, changed cables, even changed routers. Still the PC wasn't seeing the router. So I download the latest drivers for the Realtek network adapter, install them, still nothing. So I thought maybe the router is to blame, downloaded the latest firmware and flashed it onto the router, reset it. Still the same. At this point I was sure the new network card was faulty. So I took the computer to the shop where i bought the card. He disabled the old network adapter in the bios. And he had the Internet up and running in the shop. I was happy and took it home... Still the same problem! Rang ISP done a lot of disabling, enabling, static IP no fix... except he told me to bypass the router and try plugging the PC directly to the modem, and that connects fine. I can get internet from the modem, but not through the router, yet everything else works fine though the router. As I said cables and ports in the router have all been changed and checked. When I do the network diagnostics in windows 7 is says, does not have a valid IP configuration.
View 19 Replies
View Related
Mar 11, 2011
I have a linksys E1000 and cannot connect to my wireless network. what is supposed to plug in where in the back of the router?
View 2 Replies
View Related
