Linksys Wireless Router :: WRT54g - Can't Login To Guest With Laptop Using Office Network
Oct 30, 2012
I have a Cisco network at my office and the router and everything is set up under my desk.I can use the internet just fine on my office computer but I am trying to use it on my laptop and login to the guest account .I ran across the Cisco Connect sofware and that I need it to find the password but the problem is I dont think I have a router or whatever it is that is compatible with this software I am using WRT54g wireless n router, the models on the site for the cisco connect are e series
View 1 Replies
ADVERTISEMENT
Feb 8, 2012
I have a wrt54g router and would like to separate the WLAN clients from accessing computers and servers on the LAN... in other words I would like to make it a "guest" network. I've put the router in "router" mode instead of "gateway". I just want to be sure if that is the best thing I can do in terms of turning the wireless network into an isolated one.
View 4 Replies
View Related
Sep 5, 2008
I have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies
View Related
Jul 14, 2007
Am trying to set up a laptop computer to my wireless network (WRT54G V6)
View 9 Replies
View Related
Feb 9, 2013
Is it possible to change the look of welcome page (guest login) to change so that it is personal. Of course it would be great if the guests have to log on your personal page.On this page you would be able to indicate the rules and and limitations. It would also be a good option for certain that your guests a limited time duration for the connection and gives max download. This would also be found to be in a log.
View 2 Replies
View Related
Jun 11, 2011
When Im connected to the GUEST network and open the web-browser it will not open the Linksys guest-login page. Why?(latest firmware ver.1.0.01(Build10) installed)
View 9 Replies
View Related
Jul 2, 2011
I've tried looking for solutions on the windows seven forums and all over Google but none of them worked.The problem is, sometimes I get an "Unidentified Network, No Internet Access" error on my laptop (wireless). When this happens, the lan speed drops to 1.0 mbps and I get the "No Data Received" error when I try to load pages.My internet is on fine and my brother can access the internet fine on a desktop which is wired to the router and modem. My mom's notebook sometimes gets this error as well.
Is there any real solution for this problem or known compatibility problems between my WRT54G (version 1.1 I think) and Windows 7? Really need a solution to this, before I had to re-setup my whole connection, I didn't get such a problem. My laptop doesn't get the error in the school network either.
View 2 Replies
View Related
Jan 21, 2013
I am unable to login to my router ? I have tried to reset my router and am still unable to login to the online control panel. The steps that I went about resetting the router were pushing the reset button for 30 seconds. That did not work so I pushed the reset button for 30 seconds, unplugged the router while continuing to hold the reset button for 30 seconds, plugged the router back in while holding the reset for 30 seconds.
View 6 Replies
View Related
Jan 25, 2011
Config:
Netgear ProSafe Gigabit Router is my DHCP Server -- The entire home net work is on the same subnet (192.168.15.xxx)
Linksys E4200 configured as an access point ONLY -- wired connection -- static IP assigned -- DHCP server turned off
Linksys WRT610N configured as an access point ONLY -- wired connection -- static IP assigned -- DHCP server turned off
3 -- 5 port gigabit switches
1 -- 8 port gigabit switch
No more than two switches between any two wired devices Both Linksys access points have the same SSID and WPA2 security phrase -- total of 4 radios Nonoverlapping channels are selected on both the 2.4Ghz and 5.0Ghz radio to minimize interference All computers are running Windows 7 Professional 64bit with all the latest updates Two iPhones and one iPad also access the network All LAN and WAN connectivity is working as designed?
Problem:
guest SSID is turned on
password is established
All devices will connect to the guest SSID and the E4200 is assigning an ip address to the device in the 192.168.33.xxx range which is what it's supposed to do.When I open a web browser, I am not automatically redirected to the Cisco Login Page. If I enter 192.168.33.1 as the URL, the login screen is presented. I enter the password I have created in the guest admin page on the wireless guest tab. I then see a blank page and a URL of 192.168.33.1/guestnetwork.asp. THIS IS WHERE I GET STUCK. THE ONLY WAY TO EVER SEE THE LOGIN PAGE AGAIN IS TO REBOOT THE E4200, otherwise you just get unable to connect messages when opening web browsers and the wireless status icon in the system tray shows a yellow exclamation mark.
I successfully connect to the guest SSID but I do not get access to the internet. When I type ipconfig, I see that the DNS is set to 192.168.33.1 which does not exist on my network. I assume there's some internal NAT magic that is supposed to happen in the E4200 to bridge me over to my 192.168.15.xxx network but it doesn't seem to be happening.At the beginning of the call I specifically asked them if the E4200 must be the DHCP server in order for the guest SSID feature to work and they said no. 1.5 hours later they had no answers so they told me that it wasn't working because the E4200 was not the DHCP server. The documentation says nothing about a DHCP requirement for guest AP service. Linksys support further could not answer what you would do if you needed more than one AP with guest service enabled.It seems like this is a firmware issue but it may be the guest SSID service requires the E4200 to also act as the DHCP server. Whether this is a bug or if the router/AP is working as designed?
View 9 Replies
View Related
Aug 11, 2011
I have an E3000 with firmware version 1.0.04 with WiFi configured as:Guest5GHz (only N)2.4 GHz (only G)I use the guest network access for my guests or my neighbor.Usually they connect and the first page they see in the browser is the http://192.168.33.1/login.asp were they put the password. Some times shomething don’t work and the browser don’t show the page, so the people can’t use the connection because they get a timeout error.The only solution I have in this case is to resart the router, but sometimes is not enough and I have to fisically shotdown and restart it.The login.asp page starts with: This is UNPUBLISHED PROPRIETARY SOURCE CODE of CyberTAN Inc. the contents of this file may not be disclosed to third parties, copied or duplicated in any form without the prior written permission of CyberTAN Inc. This software should be used as a reference only, and it not intended for production use! What about a firmware update to fix it and give the control from the web administration over the guest network?
View 5 Replies
View Related
Jul 18, 2011
I have wrt54gl setup with dd-wrt standard version running hotspotsystem. 3 wrt54g version 5 with dd-wrt micro setup as WDS client of wrt54gl. After the intial setup I can log into the main router wrt54gl (192.168.1.1)and all 3 WDS routers (192.168.1.2 ,3 and 4), but after couple of days of testing suddenly i can not login to 2 of the WDS routers,
I mean I can connect to it and it will get me to internet but I can no longer login, it just says the page take too long to load. I know if I do a hard reset and setup WDS again then it will work, but I dont want to keep doing that. Tried to power cycle the router but still wont work. Is it the load on the router made it inaccessible ?
View 1 Replies
View Related
Oct 24, 2011
Summary: Want to use a WRT54G cascaded behind existing DI-604 router to offer free wi-fi to guests. Need to keep guests on a separate subnet, and make sure their traffic is never routed to currently existing one (office PCs).
,__________________
......... WAN| |
|Cable- |.............| Router A |
| modem | (ISP-assig| (DLink DI604) |LAN
`.......' ned addr)`..................|192.168.0.1 (static)
| | |
| | |
| ,---. ,---. ,---.
| |.10| |.11| |.12| Office PCs
| |___| |___| |___|
[code]....
Tried above settings, with DHCP enabled for the new guest subnet. Using normal Gateway mode (i.e. re-NATting). Wireless guests can access the Internet, but also 192.168.0.x machines.Also tried, as suggested on several docs, disconnecting the WRT from the main network, resetting to factory defaults and setting up router from scratch, with the same result. It seems reasonable that, by default, things are set up in such a way that the new subnet can share resources with the existing one; however, I need the contrary and can't seem to get it right.BTW, as soon as I enter the static IP and default gateway for the WAN interface I see new default entries appearing on the static route table (Adv Routing / Show Table) for 10.x.x.x to 192.168.0.x routing. I suppose that this is necessary for the router itself, as a member of both, to be able to perform NAT and gateway through the upper tier -- since I can't seem to delete these entries manually, anyway.Considered using Router mode, but if I understand correctly, that would disable NAT, which seems (to me) inconsistent with the "separate subnet" requirement, since the main router would need to NAT guests as well as employee PCs (which would imply using one subnet for both, right?). Considered adding a firewall rule at the WRT, but the firmware does not seem to offer a suitable feature. There are "Filters", but those aim at restricting Internet access (which I want to allow), or to a certain range of ports, or even search keywords -- but not to a range of *hosts*.Tried filtering out guest-to-LAN traffic at the main router, but this proved nontrivial to get working (probably due to NAT-within-NAT which, other than that, works fine). It sounds a bit silly, anyway, I mean, why route this kind of traffic only to filter it out later on? I'd rather not route it at all in the first place. Can that be avoided? How?
View 9 Replies
View Related
Nov 11, 2012
is it possible to eliminate the the guest login screen from being displayed/required to acess router from an added device(like a smart tv with a web browser)?router is an e2500,approx.
View 4 Replies
View Related
Jul 8, 2012
I have been tasked with setting up a guest wireless network for a remote office. They would prefer that the guest network be on a different VLAN than the trusted network, and they want to use a different outside IP address for the guest network.
I am trying to figure out how to configure the ASA so that it supports two different LANS, each with it's own outside IP address. Is this possible?
View 7 Replies
View Related
Oct 6, 2011
I've run into this before, but I can't figure it out this time. Running Windows XP SP3 on a Dell Vostro 1510 notebook with a Linksys WRT54G router wireless. Using Dells Network Assistant for management, so I cannot get to Windows wireless connection management directly.I have a connection to the internet with a Security Key. When I bring up a browser (Firefox or IE) I cannot resolve to a web site. There is a Cisco login screen that is forced. It's from a previous wireless connection on a different network at a different location.
View 1 Replies
View Related
Oct 17, 2012
Any problems with the guest network on the ea4500 with the cloud firmware? I am losing guest clients after about 24 hours and the re-authentication fails. you enter the guest password and nothing happens until you reboot the router.
View 2 Replies
View Related
Feb 9, 2008
Adding a second laptop to wireless Router WRT54G
View 6 Replies
View Related
Apr 1, 2012
Linksys WRT54G wireless router is not working on my laptop. It is telling me this statement: ”The settings saved on this computer for the network do not match the requirements of the network.”
View 1 Replies
View Related
Sep 22, 2009
I work for a large company and want reinstall my wireless router so I move from room to room with my laptop without plugging into our network. I have had it set up before but had to spent an hour with tech support to configure the router. Recently I had to reset the password and lost all the settings.
I can get to logged into the set up with the default password but have no idea how to configure it. No matter what I try I get no conectivity when I try to redirect the browser to the internet.
Yeah, I know I should let our network IT staff set it up, but they get all bent when I want to extend my access to a wireless configuration even if it's password protected.
View 9 Replies
View Related
Mar 25, 2013
it might be good to point out first that this was never a problem before i began fixing a completely irrelevant problem (screen broke) with my laptop, which took around three weeks. i could at that time use the internet a couple of rooms away from the router just fine, but now it's a no-go. .
the model is WRT54G, and the serial number is CDFD1F9CJ507.
View 1 Replies
View Related
Jan 17, 2012
Running Win XP (no service pack), WPA personal. Two other computers connect fine. On an old laptop running Win XP the network card sees the router, but when I enter the correct passcode (16 character) I get a message saying the code must be 13 characters. How can a connect this computer without disabling the other two wireless devices running through the router?
View 2 Replies
View Related
May 2, 2012
I'd like to use an E2500 as a wireless access point in my network. My computer is connected to the office network through a Netgear 5 port desktop switch. Would it be easier for me to configure the E2500 from the switch? If so, do I just plug it in there and access it via the 192.168.1.1 IP address to set it up? And lastly, what should disable (DHCP) or setup in the router so the internet functions through it?
View 8 Replies
View Related
Jun 13, 2011
I'm the IT Manager for a Small Non-Profit Organization(facilitating build homes, giving education, health care for the poor).All computers are connected to a network through a Linksys E1000 Wifi Router and I would like to access all computers remotely especially when I'm on my site visits or when I'm not in the office. Is there a way for me to join the network even if I'm outside the office.
View 5 Replies
View Related
Jul 7, 2012
I have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.
View 9 Replies
View Related
Jan 17, 2011
Just recently got a new 881W router. i have downloaded the 2.4 software upgrade. I go into the Office extend AP login and i get just a enter button. when i click on the enter button the AP page does not come up.
View 7 Replies
View Related
May 9, 2013
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
View 3 Replies
View Related
Jan 22, 2011
My current IT people are so expensive, I am determined to hook up a new laptop to my office network if it destroys me (wirelessly). I have the office network map with all usernames, passwords, and IP addresses...but I can't figure it out. Can someone give me a step by step for dummies to save me the several hundred or should I just bite the bullet? (I am the business owner and seems like we add laptops every year or so and desktops and would really love to finally understand)
View 1 Replies
View Related
Feb 21, 2013
I have the wireless guest network up and running just fine. But, I need to also connect to the router's quest network via one of the ethernet ports. Can I just give the LAN-conencted PC a 192.168.3.x static IP to access the guest network? I am assuming there is no VLAN functionality...
And even better, can I set up a DHCP relationship to that port? So that any device plugged into the port will get a IP on that subnet?
View 4 Replies
View Related
Oct 31, 2012
Is there a way to get rid of the guest network on a E1000 or is it part of the setup.
View 1 Replies
View Related
Dec 3, 2011
I know the Guest network will allow people in my condo to use their wireless toys but does this open up the possibility of people next door for example using my network??
View 2 Replies
View Related
Aug 28, 2011
We're looking at deploying both office extend and also a guest wlan. Both would require a WLC in the DMZ.My question is can one 5508 WLC be both a guest anchor and have office extend APs on it at the same time?
View 2 Replies
View Related
Jun 24, 2011
I cannot get the Guest Network feature to work.Even though Guest SSID is enabled, it does not show up on any devices attempting to connect. Manually connecting by entering the Guest SSID fails (not recognized). On devices with the primary 5 and 2.4 GHz configured they do see the third network but without SSID (unknown) and are also unable to connect to it manually using the SSID.I did not try this before 1.0.02. Have rebooted modem and verified all configs (multiple times). The network is live in an office and can't keep screwing with it or drastically changing its settings.
View 9 Replies
View Related
Nov 2, 2012
I just installed my EA4500 router and it was amazingly simple. My only question is it shows two wireless connections available: The secured one I set up and the another network with the same name that says "guest" and is NOT secured. Is there a way to either disable the unsecured guest network or to secure the guest network?
View 2 Replies
View Related
