Linksys Wireless Router :: WRT120N - Can't Accept Login Credentials When Login From IE10 Browser

May 9, 2013

 We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?

View 3 Replies


ADVERTISEMENT

Cisco Wireless :: Does WLC 5508 Has Capability To Create Login Credentials With Specific Time Of Validity

Jul 18, 2011

Does WLC 5508 has capability to create login credentials with specific time of validity? Could it be used in hotel set-up to provide prepaid access account to guest?

View 2 Replies View Related

User Can't Login Into Domain With Right Credentials In Active Directory

Feb 19, 2013

user can't login into domain with right credentials in active directory

View 6 Replies View Related

Cisco :: HTTPS Router Login Not Working In Web Browser?

Feb 21, 2013

I can put login into the router just fine.. But the same login doesn't seem to work via web browser

View 2 Replies View Related

Linksys Wireless Router :: WRT120N - QOS Doesn't Accept Phone MAC Address

Jan 23, 2012

My Linksys WRT120N router doesn't accept my cellphone's MAC address... Phone's MAC address is AC:81:F3:08:13:F5 but upon adding the MAC address Internet Access Priority Category based on MAC address, I get an error "Assign MAC address is incorrect".

View 1 Replies View Related

Protocols / Routing :: Successful Login Redirects Back To Login Page After Satellite Upgrade?

Feb 10, 2012

I have a website account with fatcow. I created the website with Dreamweaver software and uploaded it to fatcow via port 21.My internet connection was via xplornet and I had no access problems. I upgraded to xplornet's new g4 system and now I can no longer access my account online or upload to my website.We have two computers. The first is a desktop system that has the dreamweaver software. The second is a laptop which connects wirelessly. We share the signal through a dlink router. The modem is a viasat Surfbeam 2 residential satellite modem.1. When I attempt to login to the fatcow control panel, the tab shows successfully authenticated and then re-directs me back to the login page. This happens on both the laptop and the desktop.

I have tried bypassing the router and the problem still exists.I took the laptop to the computer center and I can login to the account no problem.I used a free proxy server page on the internet and can login from my home system on my desktop no problem.I have completely turned off virus scan and firewalls. It doesn't work. I have tried IE7, Chrome, Firefox and they all have the same problem. The laptop runs IE8 and has the same problem.I can ping the page successfully. I can traceroute the page successfully. I can't nslooup any site at all. I get the domain not existant message.My ip and dns settings are the automatically find option.I have renewed ips and dumped the dns cache.Using alternate dns addresses doesn't rectify the problem. When I attempt to upload via dreamweaver, I connect but within seconds I get a Dreamweaver message that says "Connection to remote host has been lost. Click refresh to continue" and the log reads "FTP Error. Dreamweaver could not connect to server." I haven't taken my desktop anywhere to try to see if it works on a different network. I'm in a remote location (hence the satellite internet)and it is an hours drive to the nearest private internet connection and a 2 hour drive to the nearest public connection.

View 19 Replies View Related

Linksys Wireless Router :: Unable To Login To WRT54G?

Jan 21, 2013

I am unable to login to my router ? I have tried to reset my router and am still unable to login to the online control panel. The steps that I went about resetting the router were pushing the reset button for 30 seconds. That did not work so I pushed the reset button for 30 seconds, unplugged the router while continuing to hold the reset button for 30 seconds, plugged the router back in while holding the reset for 30 seconds.

View 6 Replies View Related

Linksys Wireless Router :: EA4500 - Can't Login - Get 502 Bad Gateway

Mar 2, 2013

I can't log into the router.  Get 502 Bad Gateway - Model EA4500;  Have a USB Drive connected to the router.
 
Power-off and Powered-Back on -  no change. 

View 9 Replies View Related

Linksys Wireless Router :: E4200 Cannot Login To Ftp On Port Other 21

Oct 4, 2011

After updated firmware to 1.0.03 still can't log in to ftp on port other than 21 ( eg. 2121 ). Will it be fixed ever ? I told with guys on live chat but connection broked twice.

View 9 Replies View Related

Linksys Wireless Router :: How To Login To WRT54GL Under Some Special Condition

Jan 11, 2013

I am using a wrt54gl in 'Router' mode. It is behind a server that is configured as a server/router/firewall that is serving dhcp addresses for the network behind it. I have bypassed the dhcp server hardware by plugging the LAN out from my server/router/firewall into a  switch port on the back of the wrt54gl. I have switched off the dhcp server in the wrt54gl during it's configuration.how can I login to the wrt54gl to review and make note of its current configuration ?

View 3 Replies View Related

Linksys Wireless Router :: WRT54GS - PPPoE Automatic Login?

Aug 2, 2011

I have a WRT54GS wireless router.  I can successfully set up the router with my DSL modem for PPPoE.  Here's my problem.  The router configuration requires you to put in the userID and password, then logs you in to your ISP automatically.  I DON'T want it to do that.  Is there any way to configure for PPPoE where ISP login is controlled manually; i.e., when the user tries to connect to a web page, a dialog pops up for entering the password?

View 1 Replies View Related

Linksys Wireless Router :: Can't Login To Wrt150N After Hard Reset

Aug 21, 2011

I have a router that I upgraded the firmware a while ago, I stopped using it several months ago, I was going to give this router to my sister,  i tried a hard reset(30 seconds press reset, unplug, hold hold the reset, wait 20 sec, plug power, hold for 30 sec and release the reset) and I tried to login with admin admin and it doesn't accept it. I tried with another router dlink 614i and the same problem, after resetting it it's not accepting admin admin log/pass.

View 1 Replies View Related

Linksys Wireless Router :: E900 - Need To Automate Security Key Login

Feb 9, 2013

Everytime I boot up my Winows 7 desktop the new E900 requires a security key to login.
 
Can't seem to get the settings right to automatically login like my laptop does.   Routers can be humbling. 

View 4 Replies View Related

Linksys Wireless Router :: EA-4500 Can't Login Into Setup Page

Oct 26, 2012

I'm trying to login to my EA4500 setup page. I have the "cloud connect" firmware and when I'm redirected to the "Linksys Smart Wi-Fi" page in my browser, I attempt to login as usual.It accepts my login name and password, and then I get a page that has a rotating graphic and it says "waiting..." It eventualy times out and takes me back to the login screen. I've tried to reboot my router and that doesn't work. I've also disconnected the internet connection from the modem, and entered the router main password, and that gives me the same response as if I tried to connect via the cloud.

View 9 Replies View Related

Linksys Wireless Router :: EA4500 Waiting Forever When Login

Apr 23, 2013

I was login with my "router password" to my EA4500 yesterday without problem, after I brought another EA4500 today and try to find out my existing EA4500 configuration.I just can't login..I mean it just stay forever on the "Waiting..." screen after I enter the "router password"
 
-no luck with changing browser, I try ie, firefox, chrome, is still the same
-no luck with other pc, I try login with another notebook or pc, is same..
-no luck with switch off, I try refresh button once, same..and try to turn it off 5 minute and try again..same

View 9 Replies View Related

Linksys Wireless Router :: Changing Look Of Welcome Page (guest Login)

Feb 9, 2013

Is it possible to change the look of welcome page (guest login) to change so that it is personal. Of course it would be great if the guests have to log on your personal page.On this page you would be able to indicate the rules and  and limitations. It would also be a good option for certain that your guests a limited time duration for the connection and gives max download. This would also be found to be in a log.

View 2 Replies View Related

Linksys Wireless Router :: Wrt54gl And Wrt54g Setup WDS But Can't Login

Jul 18, 2011

I have wrt54gl setup with dd-wrt standard version running hotspotsystem.  3 wrt54g version 5 with dd-wrt micro setup as WDS client of wrt54gl.  After the intial setup I can log into the main router wrt54gl (192.168.1.1)and all 3 WDS routers (192.168.1.2 ,3 and 4), but after couple of days of testing suddenly i can not login to 2 of the WDS routers,
 
I mean I can connect to it and it will get me to internet but I can no longer login, it just says the page take too long to load.  I know if I do a hard reset and setup WDS again then it will work, but I dont want to keep doing that. Tried to power cycle the router but still wont work.  Is it the load on the router made it inaccessible ? 

View 1 Replies View Related

Linksys Wireless Router :: W610N Cannot Login - Authentication Failed

Jun 15, 2011

I use IE7.0 
192.168.1.1
user name : admin
password : admin
 
Error is saying "401 Authorization required" Browser not authentication-capable or authentication failed.

View 9 Replies View Related

Linksys Wireless Router :: E1550 Getting Error And Could Not See Login Page

Mar 23, 2012

I tried to connect to my E1550 router admin page at 192.168.1.1 and I'm not seeing the login page. I'm getting an error. I've always been able to get to the admin page. I'm not sure what changed. I tried changing the IP# and subnet mask of my laptop and I still can't connect. I tried resetting the router to factory defaults.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Will Not Open Guest Login Page?

Jun 11, 2011

When Im connected to the GUEST network and open the web-browser it will not open the Linksys guest-login page. Why?(latest firmware ver.1.0.01(Build10) installed)

View 9 Replies View Related

Linksys Wireless Router :: EA6500 Admin Page Hangs On Login?

Feb 3, 2013

I have been through three chat sessions on this without resolution and support tells me just to factory reset. After some time (weeks) after a successful local login to the admin page subsequent attempt to login just hang. After entering the admin password the page changes and says "Waiting" under revolving circles. It will sit there for over 1 hour. I have tried IE, chrome and firefox on Windows 7 and Windows 8 on three different machines and it behaves the same. Of course I have to go through this same process with the support people every time and every time they come to the conclusion that I have to do a factory reset. But so far Linksys denies that there is a defect.

View 9 Replies View Related

Linksys Wireless Router :: E4200v2 - Smart Wifi Cannot Show Anything After Login

Mar 18, 2013

I've just updated my router (E4200v2) to the smart wi-fi firmware and it seems I can only properly access it in the "local" mode (by that I mean that I can edit some of the properties such as wifi settings).If I try to login through the cloud / smart wifi account i only get the empty screen, no options, no widgets, nothing (see the included picture).

View 5 Replies View Related

Linksys Wireless Router :: Ea6500 - Can't Login Into Smart Wifi Outside Home

Nov 20, 2012

Do I need to portforward a port for logging into my Linksys EA6500 smart wifi router from outside home? I can only login when I'm om LAN or wifi..Another question: Can I only login to the same router using an app? Isn't there a way to login via browser?

View 9 Replies View Related

Linksys Wireless Router :: How To Login Protect A Forwarded Port On E3000

Nov 18, 2011

I have a linksys E3000 and a WD My Book World Edition 2. (WDMBWE2)What i want is to access my WD from any where. I have tried setting up a simple single port forward to the WDMBWE2, which worked great. I was able to view all my files from anywhere.however, i wasn't prompted for any login.so basically anyone could access and modify all my data.I have obviously deactivated this again.
 
I have already tried setting up user accounts on my WDMBWE2 to try and solve this, but that only creates the problem of my TV and music player not being able to access it anymore(they both cant type in login information).Is there any way to make the E3000 prompt me a for login/password when requesting that port?

View 1 Replies View Related

Linksys WRT54G Wireless Router - Forced Login On Previous Access Can't Be Removed

Oct 6, 2011

I've run into this before, but I can't figure it out this time. Running Windows XP SP3 on a Dell Vostro 1510 notebook with a Linksys WRT54G router wireless. Using Dells Network Assistant for management, so I cannot get to Windows wireless connection management directly.I have a connection to the internet with a Security Key. When I bring up a browser (Firefox or IE) I cannot resolve to a web site. There is a Cisco login screen that is forced. It's from a previous wireless connection on a different network at a different location.

View 1 Replies View Related

Linksys Wireless Router :: WRT54g - Can't Login To Guest With Laptop Using Office Network

Oct 30, 2012

I have a Cisco network at my office and the router and everything is set up under my desk.I can use the internet just fine on my office computer but I am trying to use it on my laptop and login to the guest account .I ran across the Cisco Connect sofware and that I need it to find the password but the problem is I dont think I have a router or whatever it is that is compatible with this software I am using WRT54g wireless n router, the models on the site for the cisco connect are e series

View 1 Replies View Related

Linksys Wireless Router :: WRT610n Unable To Login Config Page Via HTTPS

Jul 13, 2012

I'm having wrt610n and there is an issue, i can login to the config page via http, but using the same computer i'm not able to login there via https but the same time i can login via ipad and the other computer, using the https.i even tried to reset the router settings, but the result was the same, so what PC option can cause it?

View 6 Replies View Related

Linksys Wireless Router :: E4200 Guest SSID Login Page Fails?

Jan 25, 2011

Config:

Netgear ProSafe Gigabit Router is my DHCP Server -- The entire home net work is on the same subnet (192.168.15.xxx)
Linksys E4200 configured as an access point ONLY -- wired connection -- static IP assigned -- DHCP server turned off
Linksys WRT610N configured as an access point ONLY  -- wired connection -- static IP assigned -- DHCP server turned off

3 -- 5 port gigabit switches
1 -- 8 port gigabit switch

No more than two switches between any two wired devices Both Linksys access points have the same SSID and WPA2 security phrase -- total of 4 radios Nonoverlapping channels are selected on both the 2.4Ghz and 5.0Ghz radio to minimize interference All computers are running Windows 7 Professional 64bit with all the latest updates Two iPhones and one iPad also access the network All LAN and WAN connectivity is working as designed? 

Problem: 

guest SSID is turned on

password is established 

All devices will connect to the guest SSID and the E4200 is assigning an ip address to the device in the 192.168.33.xxx range which is what it's supposed to do.When I open a web browser, I am not automatically redirected to the Cisco Login Page. If I enter 192.168.33.1 as the URL, the login screen is presented. I enter the password I have created in the guest admin page on the wireless guest tab.  I then see a blank page and a URL of 192.168.33.1/guestnetwork.asp. THIS IS WHERE I GET STUCK. THE ONLY WAY TO EVER SEE THE LOGIN PAGE AGAIN IS TO REBOOT THE E4200, otherwise you just get unable to connect messages when opening web browsers and the wireless status icon in the system tray shows a yellow exclamation mark.

I successfully connect to the guest SSID but I do not get access to the internet. When I type ipconfig, I see that the DNS is set to 192.168.33.1 which does not exist on my network. I assume there's some internal NAT magic that is supposed to happen in the E4200 to bridge me over to my 192.168.15.xxx network but it doesn't seem to be happening.At the beginning of the call I specifically asked them if the E4200 must be the DHCP server in order for the guest SSID feature to work and they said no. 1.5 hours later they had no answers so they told me that it wasn't working because the E4200 was not the DHCP server. The documentation says nothing about a DHCP requirement for guest AP service. Linksys support further could not answer what you would do if you needed more than one AP with guest service enabled.It seems like this is a firmware issue but it may be the guest SSID service requires the E4200 to also act as the DHCP server. Whether this is a bug or if the router/AP is working as designed?

View 9 Replies View Related

Linksys Wireless Router :: WRT610N - HTTPS Secure Login To Admin Page?

Mar 29, 2013

I am trying to log into my WRT610N version 2.0 Router  admin page 192.168.1.1 using the secure HTTPS://192.168.1.1 protocol I have the router local management setting to allow both http and https access login:192.168.1.1/Management.asp I am using Microsoft IE version 10 and Firefox version 19.02 and latest Chrome browsers and none of them will work using the HTTPS protocol.This used to work in the past using older versions of the browsers though I would see a certicificate error warning.I have 2.00.01 build 15 firmware installed and I already tried reseting the router.  Perhaps the router needs new firmware update to handle this with the latest browsers?

View 6 Replies View Related

Linksys Wireless Router :: E3000 Sometimes Don’t Show The Login Page For Guest

Aug 11, 2011

I have an E3000 with firmware version 1.0.04 with WiFi configured as:Guest5GHz (only N)2.4 GHz (only G)I use the guest network access for my guests or my neighbor.Usually they connect and the first page they see in the browser is the http://192.168.33.1/login.asp were they put the password. Some times shomething don’t work and the browser don’t show the page, so the people can’t use the connection because they get a timeout error.The only solution I have in this case is to resart the router, but sometimes is not enough and I have to fisically shotdown and restart it.The login.asp page starts with: This is UNPUBLISHED PROPRIETARY SOURCE CODE of CyberTAN Inc. the contents of this file may not be disclosed to third parties, copied or duplicated in any form without the prior written permission of CyberTAN Inc. This software should be used as a reference only, and it not intended for production use! What about a firmware update to fix it and give the control from the web administration over the guest network?

View 5 Replies View Related

Linksys Wireless Router :: Wrt600n Still Can't Login To Router After Factory Reset

Oct 17, 2008

Ok, so I reset the router but i still can't login to the setup using the factory password (admin/admin) (blank/admin) (admin/blank).   Now I have an unencrypted network and no access to the setup... I even tried using the setup CD but it doesn't recognize the router.  

View 2 Replies View Related

Linksys Wireless Router :: EA4500 - How To Turn Off Cisco Connect Cloud Login Screen

Jun 26, 2012

I tried to log in into my EA4500 today, and instead of the simple window that asks for the user name and password, I am getting a Cisco Connect Cloud log in screen.  It is very strange.

At the top it says: Cisco Connect Cloud/Powering Linksys Products

and below that:

Sign In If you have not yet created an account, click the 'Create Account' button in the upper right corner of the page

There is a help button, a button to create an account.  There is a place where I can enter an email address and a password.

Pressing the Help button I learned that I can probably bypass this silly screen by disconnecting the internet.  Is there a better way to bypass this screen and turn off Cisco Connect Cloud?

View 9 Replies View Related

Linksys Wireless Router :: RE1000 Wired PC Prompting User For Login Information For Wireles

Oct 30, 2012

I recently installed an RE1000, which seemed to be working fine. Then, on 3 PC's with no wireless adapter installed we began being prompted for user name and password for the wireless router. Once I unplugged to extender the problem went away. I know what you're thinking: Maybe I just think there's no wireless adapter on these PC's. NO, I looked in device manager and the only network adapter installed is the ethernet adapter. These are all 4+ year old machines with no hardware changes made to them. Wireless adapters are not necessarily standard issue on old towers--even on new towers. The Acer I'm using right now was purchased new in November 2011 and did not come with a wireless adapter installed.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved