Linksys Wireless Router :: EA6500 Admin Page Hangs On Login?

Feb 3, 2013

I have been through three chat sessions on this without resolution and support tells me just to factory reset. After some time (weeks) after a successful local login to the admin page subsequent attempt to login just hang. After entering the admin password the page changes and says "Waiting" under revolving circles. It will sit there for over 1 hour. I have tried IE, chrome and firefox on Windows 7 and Windows 8 on three different machines and it behaves the same. Of course I have to go through this same process with the support people every time and every time they come to the conclusion that I have to do a factory reset. But so far Linksys denies that there is a defect.

View 9 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT610N - HTTPS Secure Login To Admin Page?

Mar 29, 2013

I am trying to log into my WRT610N version 2.0 Router  admin page 192.168.1.1 using the secure HTTPS://192.168.1.1 protocol I have the router local management setting to allow both http and https access login:192.168.1.1/Management.asp I am using Microsoft IE version 10 and Firefox version 19.02 and latest Chrome browsers and none of them will work using the HTTPS protocol.This used to work in the past using older versions of the browsers though I would see a certicificate error warning.I have 2.00.01 build 15 firmware installed and I already tried reseting the router.  Perhaps the router needs new firmware update to handle this with the latest browsers?

View 6 Replies View Related

Cisco AAA/Identity/Nac :: Banner For ACS 5.3 Admin Login Page

Feb 20, 2012

Is there a way to put a login banner on the ACS admin web page?  Either display it directly on the web page or do a redirect to a banner page?  Can I edit the admin pages directly or does ACS provide a mechanism to add this type of feature?
 
We are using ACS 5.3 running on VMWare.

View 2 Replies View Related

Linksys Wireless Router :: EA6500 No Admin Access Until Physically Reboot

Nov 11, 2012

Just setup my new EA6500 router and while in general it seems to be performing ok I am experiencing some problems with the admin. It seems that frequently either via cloud or local i get the cannot find router message or waiting graphic which results me in having to manually reboot the router so that i can access the admin page again, The router still works fine but no admin access until i physically reboot. This kind of defeats the whole purpose of using cloud if just by accessing the router or making changes it leaves admin access inoperable!

View 9 Replies View Related

Cisco Routers :: RV042G Site Certificate Invalid On Admin Login Page?

Aug 17, 2012

I recently replaced my RV042 with an RV042G.  I did an export of the RV042 Config and used the Config Migration Tool to upgrade the file to v3 (I had an old v1 RV042).  When I first logged in to the RV042G it was quite happy and I imported the config file successfully.After installing the RV042G in my system it fired up and worked perfectly.  Unfortunately when I now try to log in via the web interface it comes up with 'Invalid Site Certificate' each time. I've tried importing the certificate but that does not work as it is flagged as invalid.All I can assume is I have either imported the origional RV042 certificate as part of the config or importing the config has corrupted the original RV042G site certificate.  I assume this is a generic issue and not specific to the RV042G as I have had this problem before but cannot remember how I solved it.The bottom line would be a hard reset and load all my settings manually but I can't spare the time just now.

View 2 Replies View Related

Linksys Wireless Router :: Cannot Connect To Admin Page At All On E3200

Feb 23, 2012

I don't have to completely reset my router as I have a ton of configs on it.  Anyway, recently for some reason, I lost all access to my admin page.  Cisco Connect also cannot find the router.  Funny thing is that all of my wireless profiles work just fine.  Meaning all of the computers in my home connect to the internet just fine using the router.  Both the guest access and WPA connected machines.[url]...

View 1 Replies View Related

Linksys Wireless Router :: E3200 Admin Page Times Out

Dec 18, 2011

I recently tried to edit settings on my E3200 and was unable to get to the page. I typed in 192.168.1.1 in the address bar, made sure no proxies were enabled and tried on wired and wireless computers and all the times it said "page could not be displayed" i haven't not reset with the button on the back. I also did an map scan of the router and this is what came up
 
Interesting ports on 192.168.1.1:
Not shown: 65531 closed ports
PORT STATE SERVICE
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
1780/tcp open unknown

View 2 Replies View Related

Linksys Wireless Router :: Ea6500 - Can't Login Into Smart Wifi Outside Home

Nov 20, 2012

Do I need to portforward a port for logging into my Linksys EA6500 smart wifi router from outside home? I can only login when I'm om LAN or wifi..Another question: Can I only login to the same router using an app? Isn't there a way to login via browser?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Can’t Open Admin Page

Oct 24, 2011

I have set up a second E4200 as an AP.Even though I’m getting a signal from it I can’t open the ADMIN page. Also, it’s NOT showing up on my main 4200 "DHCP client table'.I configured it as a static IP 192.168.1.145 during setup and still cannot get in. My ping to .145 comes back “timeout”!Since I’m getting a full signal from it, it must be working so why can’t I get in and why doesn't it show up?

View 7 Replies View Related

Linksys Wireless Router :: Unable To Access Cisco Admin Page For 54G V5

May 3, 2012

I moved. Runnig an iMac at home. Can connect to the internet but was not able to access my cisco admin page for 54G V5.  Also need to connect VPN but unable to. 

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Lost Username And Password For Admin Page

Apr 30, 2007

I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?

View 9 Replies View Related

Linksys Wireless Router :: Can't Access Cable Modem Status Page With EA6500

Apr 5, 2013

I cannot access my Motorola SB6141 cable modem status page at 192.168.100.1 thru the EA6500 router. I can bypass the router and can connect to the status page with no problem. Is there a setting to change or can I possibly do port forwarding to access it?

View 9 Replies View Related

Linksys Wireless Router :: E1200 - How To Access Router Admin Page

Apr 1, 2012

I want access the my E1200 website in order to implement new username and password to secure the network.

View 1 Replies View Related

Linksys Wireless Router :: EA-4500 Can't Login Into Setup Page

Oct 26, 2012

I'm trying to login to my EA4500 setup page. I have the "cloud connect" firmware and when I'm redirected to the "Linksys Smart Wi-Fi" page in my browser, I attempt to login as usual.It accepts my login name and password, and then I get a page that has a rotating graphic and it says "waiting..." It eventualy times out and takes me back to the login screen. I've tried to reboot my router and that doesn't work. I've also disconnected the internet connection from the modem, and entered the router main password, and that gives me the same response as if I tried to connect via the cloud.

View 9 Replies View Related

Linksys Wireless Router :: Changing Look Of Welcome Page (guest Login)

Feb 9, 2013

Is it possible to change the look of welcome page (guest login) to change so that it is personal. Of course it would be great if the guests have to log on your personal page.On this page you would be able to indicate the rules and  and limitations. It would also be a good option for certain that your guests a limited time duration for the connection and gives max download. This would also be found to be in a log.

View 2 Replies View Related

Linksys Wireless Router :: E1550 Getting Error And Could Not See Login Page

Mar 23, 2012

I tried to connect to my E1550 router admin page at 192.168.1.1 and I'm not seeing the login page. I'm getting an error. I've always been able to get to the admin page. I'm not sure what changed. I tried changing the IP# and subnet mask of my laptop and I still can't connect. I tried resetting the router to factory defaults.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Will Not Open Guest Login Page?

Jun 11, 2011

When Im connected to the GUEST network and open the web-browser it will not open the Linksys guest-login page. Why?(latest firmware ver.1.0.01(Build10) installed)

View 9 Replies View Related

Linksys Wireless Router :: WRT610n Unable To Login Config Page Via HTTPS

Jul 13, 2012

I'm having wrt610n and there is an issue, i can login to the config page via http, but using the same computer i'm not able to login there via https but the same time i can login via ipad and the other computer, using the https.i even tried to reset the router settings, but the result was the same, so what PC option can cause it?

View 6 Replies View Related

Linksys Wireless Router :: E4200 Guest SSID Login Page Fails?

Jan 25, 2011

Config:

Netgear ProSafe Gigabit Router is my DHCP Server -- The entire home net work is on the same subnet (192.168.15.xxx)
Linksys E4200 configured as an access point ONLY -- wired connection -- static IP assigned -- DHCP server turned off
Linksys WRT610N configured as an access point ONLY  -- wired connection -- static IP assigned -- DHCP server turned off

3 -- 5 port gigabit switches
1 -- 8 port gigabit switch

No more than two switches between any two wired devices Both Linksys access points have the same SSID and WPA2 security phrase -- total of 4 radios Nonoverlapping channels are selected on both the 2.4Ghz and 5.0Ghz radio to minimize interference All computers are running Windows 7 Professional 64bit with all the latest updates Two iPhones and one iPad also access the network All LAN and WAN connectivity is working as designed? 

Problem: 

guest SSID is turned on

password is established 

All devices will connect to the guest SSID and the E4200 is assigning an ip address to the device in the 192.168.33.xxx range which is what it's supposed to do.When I open a web browser, I am not automatically redirected to the Cisco Login Page. If I enter 192.168.33.1 as the URL, the login screen is presented. I enter the password I have created in the guest admin page on the wireless guest tab.  I then see a blank page and a URL of 192.168.33.1/guestnetwork.asp. THIS IS WHERE I GET STUCK. THE ONLY WAY TO EVER SEE THE LOGIN PAGE AGAIN IS TO REBOOT THE E4200, otherwise you just get unable to connect messages when opening web browsers and the wireless status icon in the system tray shows a yellow exclamation mark.

I successfully connect to the guest SSID but I do not get access to the internet. When I type ipconfig, I see that the DNS is set to 192.168.33.1 which does not exist on my network. I assume there's some internal NAT magic that is supposed to happen in the E4200 to bridge me over to my 192.168.15.xxx network but it doesn't seem to be happening.At the beginning of the call I specifically asked them if the E4200 must be the DHCP server in order for the guest SSID feature to work and they said no. 1.5 hours later they had no answers so they told me that it wasn't working because the E4200 was not the DHCP server. The documentation says nothing about a DHCP requirement for guest AP service. Linksys support further could not answer what you would do if you needed more than one AP with guest service enabled.It seems like this is a firmware issue but it may be the guest SSID service requires the E4200 to also act as the DHCP server. Whether this is a bug or if the router/AP is working as designed?

View 9 Replies View Related

Linksys Wireless Router :: E3000 Sometimes Don’t Show The Login Page For Guest

Aug 11, 2011

I have an E3000 with firmware version 1.0.04 with WiFi configured as:Guest5GHz (only N)2.4 GHz (only G)I use the guest network access for my guests or my neighbor.Usually they connect and the first page they see in the browser is the http://192.168.33.1/login.asp were they put the password. Some times shomething don’t work and the browser don’t show the page, so the people can’t use the connection because they get a timeout error.The only solution I have in this case is to resart the router, but sometimes is not enough and I have to fisically shotdown and restart it.The login.asp page starts with: This is UNPUBLISHED PROPRIETARY SOURCE CODE of CyberTAN Inc. the contents of this file may not be disclosed to third parties, copied or duplicated in any form without the prior written permission of CyberTAN Inc. This software should be used as a reference only, and it not intended for production use! What about a firmware update to fix it and give the control from the web administration over the guest network?

View 5 Replies View Related

Linksys Wired Router :: BEFSR41 Lost Access To The Admin Page

Nov 13, 2007

I have a BEFSR41 V2 working as dial in ADSL connection.While I changed my settings of the UPnP in the router I lost access to the admin page. Well most strange is that everything is working.I kept my internet access as well as the computer and printer access.The only thing I lost is access to the router admin page.The password it was not defaulted to admin, neither kept the password that I had set up.

View 9 Replies View Related

Linksys Cable / DSL :: WAG120N Empty Admin Page?

Dec 14, 2010

I have this problem since updating my firmware from 1.00.12 to 1.0016 (Annex A)
 
Problem: After leaving the router on for 1 day(dont know exactly how many hours), I tried logging in again on the admin page 192.168.1.1. Auth box appears, put username & password, but blank page after that. Tried using Safari/Firefox and it's the same. Router is working, all the LED lights are good, Internet is working, DHCP and all other config is normal. It's just that I can't access the admin page anymore.
 
When I power on/off the device, the problem is gone. Admin page is accessible again. But after some number of hours again, same problem blank admin page.
 
Does it has something to do with the router config like g.dmt/dsl 2 ? 

View 9 Replies View Related

Can't Access Admin Page Through Router?

Jul 3, 2012

Moved into a new place, set up a connection. Server provider gives only one mac address, they set it on my router. They say that it should be working, make a restart and that's it. I did that but still no connection. Moreover, I cannot connect through the router at all and therefore cannot access router admin page to configure it either. Now what to do? Password for the router is correct. Even when I take down all the security, still I cannot connect.To be more specific, at first I could enter the router admin page, but since I didn't know how to configure it properly, I made some mistake. I think I choose setting "configure wireless network" and changed something there. After that I cannot access the admin page or connect through the router.

View 1 Replies View Related

Accessing The Router's Admin Page?

Jan 29, 2012

I have a binatone wi-fi modem. Internet is working good from router but i am not able to connect to router admin page i.e 192.168.1.1 and not be able to change wi-fi password.

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND Can't Access Router Login Page

Apr 28, 2013

Region : UnitedKingdom
Model : TD-W8961ND
Hardware Version : Not Clear
Firmware Version : V.3
ISP : ADSL24

Using windows 7 and 8 on different machines I am unable access my routers web based set up.

I enter the usual "admin" and password in the login box. 3 goes and then get error message. or hangs on waiting.(connected to the router with Ethernet Cable). Could this be a windows based problem. I think it was ok on XP but that is gone now. Router is working fine but I just cant access it to alter any settings.

My 2 other spare routers which are not TP-link also have the same problem.

View 1 Replies View Related

19216811 Linksys Login Page?

Aug 29, 2012

i want to stablish a new internet connection through bsnl broad band tell me hou i can install and run internet.

View 1 Replies View Related

Protocols / Routing :: Successful Login Redirects Back To Login Page After Satellite Upgrade?

Feb 10, 2012

I have a website account with fatcow. I created the website with Dreamweaver software and uploaded it to fatcow via port 21.My internet connection was via xplornet and I had no access problems. I upgraded to xplornet's new g4 system and now I can no longer access my account online or upload to my website.We have two computers. The first is a desktop system that has the dreamweaver software. The second is a laptop which connects wirelessly. We share the signal through a dlink router. The modem is a viasat Surfbeam 2 residential satellite modem.1. When I attempt to login to the fatcow control panel, the tab shows successfully authenticated and then re-directs me back to the login page. This happens on both the laptop and the desktop.

I have tried bypassing the router and the problem still exists.I took the laptop to the computer center and I can login to the account no problem.I used a free proxy server page on the internet and can login from my home system on my desktop no problem.I have completely turned off virus scan and firewalls. It doesn't work. I have tried IE7, Chrome, Firefox and they all have the same problem. The laptop runs IE8 and has the same problem.I can ping the page successfully. I can traceroute the page successfully. I can't nslooup any site at all. I get the domain not existant message.My ip and dns settings are the automatically find option.I have renewed ips and dumped the dns cache.Using alternate dns addresses doesn't rectify the problem. When I attempt to upload via dreamweaver, I connect but within seconds I get a Dreamweaver message that says "Connection to remote host has been lost. Click refresh to continue" and the log reads "FTP Error. Dreamweaver could not connect to server." I haven't taken my desktop anywhere to try to see if it works on a different network. I'm in a remote location (hence the satellite internet)and it is an hours drive to the nearest private internet connection and a 2 hour drive to the nearest public connection.

View 19 Replies View Related

Unable To Access Admin Page Of Baitone Router?

May 22, 2012

I was doing some changes in baitone router due to mistake i have disabled something in it.Now i am not able to access its admin page....Before it i was accessing through 192.168.1.1

View 3 Replies View Related

Linksys Login Page - Only Shows A White Screen

Jun 6, 2012

I go into my login page and all I see is blank. Just a white screeb. I have put in my IP address, I have no idea what I should do. I have been trying to fnd my password but the page has no login.

View 3 Replies View Related

Linksys Cable / DSL :: X3000 - Can't Login To Account Page

Feb 14, 2012

We set up our new Linksys last night but when the password was written down there is no distinction between upper and lower case letters - I can't login to an account page or do anything and I needed a password for a visiting friend.

View 1 Replies View Related

Routers / Switches :: Cannot Connect To Router's Default Admin Page?

Dec 25, 2012

Motorola wr850gp wireless router. The default ip is 192.168.10.1. I attempted to use it as a wireless access point and now it is not working at all. I tried connecting the router LAN port to the computer and 192.168.10.1 pulls up nothing.I tried connecting the modem to the WAN port and the LAN port of the router to the PC, but then I have no internet access at all. I tried resetting the router, still nothingAll lights on the router are green. I don't know what the heck is going on?

View 3 Replies View Related

D-Link DSL-2680 - Can't Connect To Router's Admin Page (timeout)

Feb 28, 2011

For about a month or two now, I've not been able to connect to my router's admin page @ 192.168.1.1 I am using a D-Link DSL-2680 router.

Whenever I go to connect to 192.168.1.1 in my Web Browser, it just sits there trying to connect and does nothing. But eventually after some minutes I get the error: 'This web page is not available The web page at http://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address. Error 101 (net::ERR_CONNECTION_RESET): Unknown error.' Here is a screenshot:

I tried pressing the reset button on the back of my router, but it would just sit there with the green power LED and another green LED just flashing constantly (I assume this is the ethernet 1 cable LED) and this happens for more than 10 minutes.

All I want to do is just port forward my game servers again without the use of Hamachi or other programs

View 2 Replies View Related

Unable To Access Router Admin Page Haier R800 Router

Dec 13, 2012

Unable to access router admin page for Haier model R800

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved