Linksys WRT54G wireless router is not working on my laptop. It is telling me this statement: ”The settings saved on this computer for the network do not match the requirements of the network.”
View 1 RepliesI have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies View RelatedRunning Comcast Business Class in my restaurant. I have a Mac Pro PowerPC G5 tower running OSX: 10.5.8. The Comcast guy hooked everything up along with the WRT54g i found in the basement (previous owner). Everything worked well, he programed the router through his internet pad; never touched my Mac. All of a sudden my power outlet in which my modem and router are connected reset themselves. I reset them back on, however, my router Never worked again. My mac is directly connected to my modem, not router. I have it hooked up on LAN #4 (light turns on), however, after the outlet reset, the router wont even show up on my Modem's LAN. I cant open it open it on my browser, 192.168.0.1, or 1.1. I try the 30-30-30 reset, nothing. While looking for my own remedy, i think i downloaded the new firmware to my mac, nothing happened.
View 1 Replies View RelatedI have tried everything I know. My router is about 4 years old, so it may be time for a new one, but it has been working great, then it just stopped.
View 2 Replies View RelatedLast night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 1 Replies View RelatedI have WRT54G connected to a cable modem for internet service. Came home at lunch yesterday and all was working fine. Came home after work last night and couldn't connect to the internet. Called Charter cable this morning and their troubleshooting showed I can connect to the internet fine if I bypass the router, so the issue must be with the router (and of course not their problem...). How do I trouble shoot this? I've tried powering down the router and releasing and renewing IP addresses but it hasn't worked.
View 9 Replies View RelatedI have a Lynksys WRT54G wireless router. It works just fine until I try to put a password on it. I go through the basic steps, it talkes all my information and tells me everything is good. I try to sign on the internet and it tells me my password is invalid....and YES Im sure its the right password I entered. I went to http://192.168.1.1/wireless.htm and did all the necessary instructions, and still, it doesn't work. I can change my network name and it works. As long as I leave it unprotected, everything works fine, but when I add the password, it tells me its invalid. I even used 123456 so as to make sure it was the right one.
View 5 Replies View RelatedAdding a second laptop to wireless Router WRT54G
View 6 Replies View RelatedI am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G. I am unable to open any ports. I upgraded to the latest firmware yesterday but still am unable to open any ports. I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports.
View 1 Replies View RelatedI went online with a tech real quick before I found I beyond complimentary tech support. They say my router is working like a switch. I cannot get any wireless access and to the three direct connections to the router only one is working. The lights are constantly blinking, with the power light blinking every so often
View 1 Replies View RelatedI have the Linksys WRT54G And it was working fine for years! Then today my computer shut down and when I turned it back on there was a connection but my computer was not responding to any commands. The icon shows full connectivity excellent connection. When I try to go to a web page it shows Connection Error and cannot get to any web pages.I am able to get on other wireless connections from neighbors but not mine. I have gone thru different directions on here and I am not technical and don't understand what is being said. I try to go to 192.168.1.1 and it asks for a password which I don't have. I have tried everything such as password and admin and get nothing.I am able to get my ip address and default gateway address and don't know the next step.
View 1 Replies View RelatedI have wirless router WRT54G ver.2. and I had firmware 2.0 So I downloaded new firmware From Here and did exactly as in instruction.
After update went successful I unplaged my router for 30 seconds but it's not working. I mean it's flashes and everything but can't access it and it is not broadcasting. and whats most interesting, reset buttom is not working
Want can I do? can I access it with some other way and reinstall firmware?
I have 2 laptops in my home, I had no problem getting one to connect to the internet. The second one I'm having trouble connecting, I am wireless, I didn't have a problem at my old house with another laptop connecting to the internet with this router. I'm trying to save myself some money by not going through my wireless company, and end up having to get their router, which I already have their modem.
View 1 Replies View RelatedAm trying to set up a laptop computer to my wireless network (WRT54G V6)
View 9 Replies View Relatedit might be good to point out first that this was never a problem before i began fixing a completely irrelevant problem (screen broke) with my laptop, which took around three weeks. i could at that time use the internet a couple of rooms away from the router just fine, but now it's a no-go. .
the model is WRT54G, and the serial number is CDFD1F9CJ507.
Running Win XP (no service pack), WPA personal. Two other computers connect fine. On an old laptop running Win XP the network card sees the router, but when I enter the correct passcode (16 character) I get a message saying the code must be 13 characters. How can a connect this computer without disabling the other two wireless devices running through the router?
View 2 Replies View RelatedI have the WRT54G router for years and use it to provide both a wireless network for our home computers and a wired network for by internet phone that connects me to my office phone system and for my work computer and printer. Last week, the wired network stopped working. I checked the wiring and plugged my wire into all four of the ports in the back of the router with no success. I followed the troubleshooting procedure that I found and changed the MTU setting. I tried to update the firmware but the screen seemed to lock up and I was unable to complete the task.
View 9 Replies View RelatedI have had a WRT54G V3 router working successfully for a number of years now with a couple wireless PCs through a cable modem with Comcast as my ISP. All of a sudden yesterday, neither PC could access the internet. No changes had been made to the router.
I contacted Comcast and they of course had me hard-wire one of my PCs into the cable modem. That worked and I was able to access the internet. However, when I tried to put the router back in place (in either a wired or wireless fashion), I could not access the internet.
I've tried following the online Linksys troubleshooting document ion. The lights that should be lit on the router are lit. I can access the router setup web page which shows the settings still intact. I've tried going through the power sequencing to no avail. Comcast says my router is the culprit of my problem, but I don't know why it would all of a sudden stop working. My wireless printer still works so it detects a signal and my PC shows it's connected, but no internet access is possible.
What do I need to do? Are there any other diagnostic tools available? I'm out-of-warranty.
I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them.
View 9 Replies View RelatedI have a Cisco network at my office and the router and everything is set up under my desk.I can use the internet just fine on my office computer but I am trying to use it on my laptop and login to the guest account .I ran across the Cisco Connect sofware and that I need it to find the password but the problem is I dont think I have a router or whatever it is that is compatible with this software I am using WRT54g wireless n router, the models on the site for the cisco connect are e series
View 1 Replies View RelatedI have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.
View 9 Replies View RelatedI've tried looking for solutions on the windows seven forums and all over Google but none of them worked.The problem is, sometimes I get an "Unidentified Network, No Internet Access" error on my laptop (wireless). When this happens, the lan speed drops to 1.0 mbps and I get the "No Data Received" error when I try to load pages.My internet is on fine and my brother can access the internet fine on a desktop which is wired to the router and modem. My mom's notebook sometimes gets this error as well.
Is there any real solution for this problem or known compatibility problems between my WRT54G (version 1.1 I think) and Windows 7? Really need a solution to this, before I had to re-setup my whole connection, I didn't get such a problem. My laptop doesn't get the error in the school network either.
wrt54g v1.1 After setting up the wireless router, I can use the internet on the pc as well as a wireless device. However after putting my pc in standby mode then back on, I can no longer connect to either. I have to restore factory defaults each time and re-enter all passwords and settings.
View 9 Replies View RelatedLast night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 3 Replies View RelatedSo my new msi GT683r has an Intel Centrino Wireless N-130 card. It plays nicely with my newer N band routers, but it can't connect to my old WRT54G (no N obviously).
For some reason my computer can't connect a solid G signal. It connects and disconnects (Solid 4 bars one minute yellow triangle the next) seemingly frequently. Packets surge as well. I may send and receive 10k packets one time every minute or so, but no more than 150k or so.
I've troubleshot essentially everything I can, from upgraded drivers, resetting the router + new WPA, etc, and no go.
WRT54G works fine. All my devices are connected to it except my new msi laptop.
I have a WRT160N v3 at home, it's been working well. I usually only have an old Toshiba Satelite on the network, which runs G IIRC.I had the network setup as open without a password (I don't really have any neighbors nearbye) however when a new computer tries to get on my network, I usually have to hit the 'sync' or w/e button on the router for the computer to get on. I'm happy with that setup, and it seems to have been working fine.
View 1 Replies View RelatedI purchased an e4200 about 6 months ago and it worked great until the other night the Internet stopped working on my laptop (wireless). I tried unplugging both my modem (Motorola Surfboard) and router and plugging them back in, but no luck. I can accesss the Internet when plugged directly into the router (with both my PC and laptop), so it looks like the issue is with the e4200. To make matters worse (and I fear much worse), I can't even access the admin page to the router through either the Cisco Connect software or through the IP address. I've tried resetting it, I've tried the 30/30/30 reset (holding the reset button while doing an unplug and pluging back in), and reinstalling the Cisco Connect software, all to no avail.
I've found threads where others have not been able to access the admin page, but they still had access to the Internet url... I haven't found a similar thread where the router doesn't seem to work at all. A few other bits of information I can think of (let me know if there's other information I can provide):The Cisco logo light flashes slowly after reset which I believe is expected.The lights in back of the router seem to work as intended.Running Windows 7 Diagnostics finds the connection "doesn't have a valid IP configuration" and "The default gateway is not available."
Three computers (two laptops - both XP, one desktop - XP) suddenly couldn't access the Internet through LAN (the Local Area Connection icon always stays disconnected with the three computers) after working perfectly fine for months. The thing is one desktop computer - XP still can connect through LAN and the wireless connection is still working. So I don't know if the problem is with the computers who can't connect through LAN or the router itself, a LINKSYS WRT54G.
View 2 Replies View Relatedcalled my internet company yesterday with a problem that my internet was not working.. so we went through some steps and basically he had me remove the wireless cord from the router put it into my computer (at the time it wasn't working via that either) and reset my ip, it started working after that and he just said I must've gotten a faulty ip. Now it still won't get internet from my router, we all have laptops in the house so wifi is essential. The internet light on the router still blinks green.[CODE]
View 15 Replies View RelatedI'm having trouble connecting my PS3 to the internet. I'm too far away from my wifi router and can't get a good signal strength. I do have an ethernet cable from my pc, but apparently it only works in my pc and not on my PS3. It keeps saying: no ethernet cable connected. I've searched fora, but apparently this can be caused by a lot of things, and I dont really find a solution :s. The problem is, it has worked before, and now it doesn't. Also, ethernet on my ps3 works perfectly at my buddy's house.
I have a linksys wrt54g version 7. I installed the router myself, but if my wired connection to my pc works, and the wireless connection works for the laptop, there shouldn't be any problem I guess?Perhaps, could the laptop -which is on the router's wifi and which is halfway in between my router and my PS3 in distance- act as a wifi amplifier to my PS3? That way, the ps3 could pick up the signal from the laptop, instead of all the way from the router?
I have a Dell Dimension 4400 pc (XP SP3) connected to Linksys WRT54G2 v1.5 router with no issues. Dell Inspirion (XP) connected to router with Linksys WPC54G Wireless notebook adapter with no issues for months. A couple of days ago, purchased a Vizio Blu Ray DVD Player (VBR220) with WiFi. I connected the Vizio to the network by entering the router pin into the Vizio network set up. It worked perfectly. However at the same time, the laptop network connection dropped, and I had not been able to reconnect, although it does recognize the network signal. I click connect to the network, enter the pass phrase (using WEP 26), but it does not connect to the access point. I disabled both firewalls, but still got the same result. I attempted using the WiFi Protected Setup, and the router advised me connection failed, while the laptop advised me the same thing. When I disabled security on the router, I was able to connect to the network via laptop, however, when I restored the security on the router, the laptop could no longer connect. Today, I reset the router, restored factory default settings and reinstalled everything. The laptop was able to connect with no problem. I again connected the Vizio by inputing the router pin into the Blu Ray network settings. Again it connected with no problem, but again the laptop connection was lost immediately, and I'm again unable to restore network connection on the laptop.
View 1 Replies View RelatedTwo days ago there was a quick power outage here, just one of those flicks off flicks back on deals, but when it came back on I noticed my internet wasn't working. Couldn't figure out what the deal was so after trying a few other things I ended up eliminating my Linksys WRT54G router and just using my DSL modem. Internet works fine.
Now, I've always been kind of sketchy on networking stuff, but I don't think there router is broken I just think it's been reset or something and now I don't know what setting I need to change to get it back to working order.
Here's the kicker though. I had the DSL modem in bridge mode and the router handling traffic before but I had a huge issue with that where my Steam would only download at 10-15 KB/s. Not only that but it would take forever to login and crash constantly. This would happen on my brother's computer too, which is on the same network. I could never figure out how to fix it as forwarding ports had no effect and every other fix I could think of amounted to nothing as well. Hell, I even did a fresh install to no avail.
Now going straight into the modem my Steam is downloading at full speed and there's no slow login or crashing issues. The thing that boggles my mind though is that more than once before I tried doing this very same thing, going straight into the modem, and it didn't fix the problem.
Ideally I want to get the router back up and running and keep my Steam in full working order, essentially to have my cake and eat it too, but the priority is to get the router back up in running as I have another PC on this network, plus a 360, a PC, a wireless printer, and two Wii's.
I'm looking to upgrade my WRT54G as I have had NO luck in getting my Galaxy Tab to connect through it so far (can connect and get an IP address but can't get out to the web) and have had intermittent problems with my Blu-ray lately. I am looking for something with the best affordable range, live 3 floors down from the current one and get about 3/4 signal strength so there's not much interference it seems. I watch a lot of online content through Hulu, Netflix, and LMB games and share with 2 other people.I am looking at the E series, probably the E1200, 1500 or 1550 as they seem to meet my needs. Any users have any advice about the ease of install and use of either of these? Or would it be better to get a gateway as we are considering going from DSL to U-verse service, twice the speed for $2/month more
View 6 Replies View Related