I am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G. I am unable to open any ports. I upgraded to the latest firmware yesterday but still am unable to open any ports. I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports.
View 1 RepliesI got an Wireless WRT54G now for a couple of years and i'm hosting a game server like minecraft for my self.Today i'd discovered something really weird.If i'm going to my Routor setting at : http://192.168.1.1 i'ts not working , if i restart my routor it works for 1 minute.Now if i start my server he is reading the port [ He said ] but... no-one can join..
View 1 Replies View RelatedI am using remote management to attempt to open port 8889 on my Linksys WRT54G router. I have successfully opened ports 22 and 80 with no problem. Additionally, I can close and reopen these ports without having to physically reset the router. However, if I try to open any other port (I have tried various ports: 23, 100, 8888, 8889, and several others) this port will not open. The ISP this router is connected to is Comcast and according to this site URL port 8889 isn't among the ports that Comcast blocks. I have tried everything I can think of to resolve this issue (short of manually resetting the router or restoring the default settings).
View 9 Replies View RelatedI am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G. I am unable to open any ports. I upgraded to the latest firmware yesterday but still am unable to open any ports. I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports.
View 2 Replies View RelatedI need to open four ports and have no idea how. My web host thought that my ISP was blocking them; the ISP says they are not and that it is teh router. I don't have pjone support anymore (WRT54G is old) so could not be walked through it by a tech support person.
View 1 Replies View RelatedI have been trying to get port forwarding to work for a week now with no luck. I use Centurylink for Adsl, modem is a zyxel 660r, router wrt54g, running windows 7.I have made my modem a bridge only. I have set my computer to a static ip. I have followed all the instructions for port forwarding on linksys. Still my ports show blocked no matter what check I use on the Internet.
View 3 Replies View RelatedRunning Comcast Business Class in my restaurant. I have a Mac Pro PowerPC G5 tower running OSX: 10.5.8. The Comcast guy hooked everything up along with the WRT54g i found in the basement (previous owner). Everything worked well, he programed the router through his internet pad; never touched my Mac. All of a sudden my power outlet in which my modem and router are connected reset themselves. I reset them back on, however, my router Never worked again. My mac is directly connected to my modem, not router. I have it hooked up on LAN #4 (light turns on), however, after the outlet reset, the router wont even show up on my Modem's LAN. I cant open it open it on my browser, 192.168.0.1, or 1.1. I try the 30-30-30 reset, nothing. While looking for my own remedy, i think i downloaded the new firmware to my mac, nothing happened.
View 1 Replies View RelatedLinksys WRT54G wireless router is not working on my laptop. It is telling me this statement: ”The settings saved on this computer for the network do not match the requirements of the network.”
View 1 Replies View RelatedI have tried everything I know. My router is about 4 years old, so it may be time for a new one, but it has been working great, then it just stopped.
View 2 Replies View RelatedLast night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 1 Replies View RelatedI have WRT54G connected to a cable modem for internet service. Came home at lunch yesterday and all was working fine. Came home after work last night and couldn't connect to the internet. Called Charter cable this morning and their troubleshooting showed I can connect to the internet fine if I bypass the router, so the issue must be with the router (and of course not their problem...). How do I trouble shoot this? I've tried powering down the router and releasing and renewing IP addresses but it hasn't worked.
View 9 Replies View RelatedI have a Lynksys WRT54G wireless router. It works just fine until I try to put a password on it. I go through the basic steps, it talkes all my information and tells me everything is good. I try to sign on the internet and it tells me my password is invalid....and YES Im sure its the right password I entered. I went to http://192.168.1.1/wireless.htm and did all the necessary instructions, and still, it doesn't work. I can change my network name and it works. As long as I leave it unprotected, everything works fine, but when I add the password, it tells me its invalid. I even used 123456 so as to make sure it was the right one.
View 5 Replies View RelatedI went online with a tech real quick before I found I beyond complimentary tech support. They say my router is working like a switch. I cannot get any wireless access and to the three direct connections to the router only one is working. The lights are constantly blinking, with the power light blinking every so often
View 1 Replies View RelatedI have the Linksys WRT54G And it was working fine for years! Then today my computer shut down and when I turned it back on there was a connection but my computer was not responding to any commands. The icon shows full connectivity excellent connection. When I try to go to a web page it shows Connection Error and cannot get to any web pages.I am able to get on other wireless connections from neighbors but not mine. I have gone thru different directions on here and I am not technical and don't understand what is being said. I try to go to 192.168.1.1 and it asks for a password which I don't have. I have tried everything such as password and admin and get nothing.I am able to get my ip address and default gateway address and don't know the next step.
View 1 Replies View RelatedI have wirless router WRT54G ver.2. and I had firmware 2.0 So I downloaded new firmware From Here and did exactly as in instruction.
After update went successful I unplaged my router for 30 seconds but it's not working. I mean it's flashes and everything but can't access it and it is not broadcasting. and whats most interesting, reset buttom is not working
Want can I do? can I access it with some other way and reinstall firmware?
I have 2 laptops in my home, I had no problem getting one to connect to the internet. The second one I'm having trouble connecting, I am wireless, I didn't have a problem at my old house with another laptop connecting to the internet with this router. I'm trying to save myself some money by not going through my wireless company, and end up having to get their router, which I already have their modem.
View 1 Replies View RelatedI just upgraded to an E4200 from a D-Link DIR-655. I cannot seem to get my desktop to connect to the E4200 at 1 GBS. My adapter is set to "auto negotiate" but will only connect at 100 MBS. If I try forcing the adapter setting to 1 GBS, it never connects. I can swap out my E4200 with the DIR-655 and it will connect at 1 GBS just fine. I am using a CAT 5E cable. Is there something I'm missing here or is the E4200 just more finicky than the the DIR-655?
View 9 Replies View RelatedI have the WRT54G router for years and use it to provide both a wireless network for our home computers and a wired network for by internet phone that connects me to my office phone system and for my work computer and printer. Last week, the wired network stopped working. I checked the wiring and plugged my wire into all four of the ports in the back of the router with no success. I followed the troubleshooting procedure that I found and changed the MTU setting. I tried to update the firmware but the screen seemed to lock up and I was unable to complete the task.
View 9 Replies View RelatedI have had a WRT54G V3 router working successfully for a number of years now with a couple wireless PCs through a cable modem with Comcast as my ISP. All of a sudden yesterday, neither PC could access the internet. No changes had been made to the router.
I contacted Comcast and they of course had me hard-wire one of my PCs into the cable modem. That worked and I was able to access the internet. However, when I tried to put the router back in place (in either a wired or wireless fashion), I could not access the internet.
I've tried following the online Linksys troubleshooting document ion. The lights that should be lit on the router are lit. I can access the router setup web page which shows the settings still intact. I've tried going through the power sequencing to no avail. Comcast says my router is the culprit of my problem, but I don't know why it would all of a sudden stop working. My wireless printer still works so it detects a signal and my PC shows it's connected, but no internet access is possible.
What do I need to do? Are there any other diagnostic tools available? I'm out-of-warranty.
I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them.
View 9 Replies View RelatedI've recently migrated a PIX 525 to ASA 5520, but for some reason (through ASA) the users from OUTSIDE aren't able access services published in DMZ as well as some DMZ servers aren't able to communicate to some OUTSIDE services.
-INSIDE to DMZ is working fine. (through ASA)
-INSIDE to OUTSIDE is working fine. (through ASA)
Below is the configuration from my PIX (where everything works just fine) as well as the one on the ASA (where there is a problem), what could be the cause?In the below case the DMZ hosts from 11.1.10.0 aren't able to access SMTP services (through ASA) and the OUTSIDE users aren't able to access DMZ web server (11.1.10.40) through ASA, this all just works fine with PIX.
object-group network inside_subnet_all network-object object inside_subnet_a network-object object inside_subnet_b network-object object inside_subnet_c network-object object inside_subnet_d network-object object inside_subnet_e network-object object inside_subnet_f network-object object inside_subnet_g network-object object inside_subnet_.access-list OUTSIDE extended permit tcp any object host-11.1.10.40 object- group WWW-HTTPS access-list DMZ extended permit object SMTP object dmz_subnet any access-list INSIDE extended permit ip
I've lost connectivity with all but one of the ethernet ports on my E4200 router. My desktop PC was connected to Port 1 but stopped working. Network troubleshooting via my Windows 7 Dell 8300 said I was not connected and to check the cable. I did that with several different cables and tried the usual router and modem reset. Only through trial and error did I find that I could connect to port 4 which is why I am able to write this post. What could have changed to disable ports 1-3 and can I get them working again? No issues with wireless connectivity.
View 3 Replies View Relatedwrt54g v1.1 After setting up the wireless router, I can use the internet on the pc as well as a wireless device. However after putting my pc in standby mode then back on, I can no longer connect to either. I have to restore factory defaults each time and re-enter all passwords and settings.
View 9 Replies View RelatedLast night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 3 Replies View RelatedI have a linksys BEFSR41 V.2 router with four ports. Ports #1 and #3 are working but the other two do not. The diag. light just blinks rapidly.
View 4 Replies View RelatedI have the Linksys WRT54G Wireless Router, when i hook my at&t modem to the modem port on the router the wireless portion of the router works, when i plug any pc into the Ethernet ports it doesnt work!If i plug the modem into the Ethernet port and plug other pcs into the other existing Ethernet ports it works by Ethernet but not wireless.
View 1 Replies View RelatedThree computers (two laptops - both XP, one desktop - XP) suddenly couldn't access the Internet through LAN (the Local Area Connection icon always stays disconnected with the three computers) after working perfectly fine for months. The thing is one desktop computer - XP still can connect through LAN and the wireless connection is still working. So I don't know if the problem is with the computers who can't connect through LAN or the router itself, a LINKSYS WRT54G.
View 2 Replies View Relatedcalled my internet company yesterday with a problem that my internet was not working.. so we went through some steps and basically he had me remove the wireless cord from the router put it into my computer (at the time it wasn't working via that either) and reset my ip, it started working after that and he just said I must've gotten a faulty ip. Now it still won't get internet from my router, we all have laptops in the house so wifi is essential. The internet light on the router still blinks green.[CODE]
View 15 Replies View RelatedWe recently purchased a 2112 WLC, running version 6.0.199.4. I have everything running through a single port on the controller, which is connected to a trunk port on our 3750 stack. Our management VLAN is vlan 40, and AP is plugged into another port on the same switch which is an access port in vlan 40. APs appear in the controller ok, receive an IP address, but we aren't able to connect to any of the WLANs and periodically the APs will disassociate with the following messages: [code] I'm not sure if that's related to why we can't connect to the WLANs or not...
Another wrinkle is that if we plug in the AP directly to one of the PoE ports on the controller, it all works perfectly. I'm guessing its something switch-related since the only difference is that we're not going through the switch when it works.
Two days ago there was a quick power outage here, just one of those flicks off flicks back on deals, but when it came back on I noticed my internet wasn't working. Couldn't figure out what the deal was so after trying a few other things I ended up eliminating my Linksys WRT54G router and just using my DSL modem. Internet works fine.
Now, I've always been kind of sketchy on networking stuff, but I don't think there router is broken I just think it's been reset or something and now I don't know what setting I need to change to get it back to working order.
Here's the kicker though. I had the DSL modem in bridge mode and the router handling traffic before but I had a huge issue with that where my Steam would only download at 10-15 KB/s. Not only that but it would take forever to login and crash constantly. This would happen on my brother's computer too, which is on the same network. I could never figure out how to fix it as forwarding ports had no effect and every other fix I could think of amounted to nothing as well. Hell, I even did a fresh install to no avail.
Now going straight into the modem my Steam is downloading at full speed and there's no slow login or crashing issues. The thing that boggles my mind though is that more than once before I tried doing this very same thing, going straight into the modem, and it didn't fix the problem.
Ideally I want to get the router back up and running and keep my Steam in full working order, essentially to have my cake and eat it too, but the priority is to get the router back up in running as I have another PC on this network, plus a 360, a PC, a wireless printer, and two Wii's.
I'm looking to upgrade my WRT54G as I have had NO luck in getting my Galaxy Tab to connect through it so far (can connect and get an IP address but can't get out to the web) and have had intermittent problems with my Blu-ray lately. I am looking for something with the best affordable range, live 3 floors down from the current one and get about 3/4 signal strength so there's not much interference it seems. I watch a lot of online content through Hulu, Netflix, and LMB games and share with 2 other people.I am looking at the E series, probably the E1200, 1500 or 1550 as they seem to meet my needs. Any users have any advice about the ease of install and use of either of these? Or would it be better to get a gateway as we are considering going from DSL to U-verse service, twice the speed for $2/month more
View 6 Replies View RelatedBackground info:
Comcast cable internet and TV
Regular modem
Linksys WRT54G router
Windows7 desktop
The problem I'm seeing is that our wireless connection cuts out about 5 minutes after turning on our main desktop. Turn off the main desktop and wireless begins to work again. Throughout all of this, the wired connection works fine, and I have no problem connecting to the router either.
i got this wireless router (linksys version WRT54G) from my aunt but she can't find the disc for it. is there a way to use it without buying anything (this is mainly for my wii), if so how?
View 2 Replies View Related