Linksys Wireless Router :: WRT54G - Check To See If Certain Ports Are Open?

Dec 29, 2011

I need to open four ports and have no idea how.  My web host thought that my ISP was blocking them; the ISP says they are not and that it is teh router.  I don't have pjone support anymore (WRT54G is old) so could not be walked through it by a tech support person.

ADVERTISEMENT

Linksys Wireless Router :: WRT54G Ports Show Blocked No Matter What Check Use On Internet

Mar 18, 2013

I have been trying to get port forwarding to work for a week now with no luck. I use Centurylink for Adsl, modem is a zyxel 660r, router wrt54g, running windows 7.I have made my modem a bridge only. I have set my computer to a static ip. I have followed all the instructions for port forwarding on linksys. Still my ports show blocked no matter what check I use on the Internet.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - Only Open Ports 22 And 80

Aug 23, 2012

I am using remote management to attempt to open port 8889 on my Linksys WRT54G router. I have successfully opened ports 22 and 80 with no problem. Additionally, I can close and reopen these ports without having to physically reset the router. However, if I try to open any other port (I have tried various ports: 23, 100, 8888, 8889, and several others) this port will not open. The ISP this router is connected to is Comcast and according to this site URL port 8889 isn't among the ports that Comcast blocks. I have tried everything I can think of to resolve this issue (short of manually resetting the router or restoring the default settings).

View 9 Replies View Related

Linksys Wireless Router :: Unable To Open Ports Through WRT54G

Mar 24, 2013

I am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G.  I am unable to open any ports.  I upgraded to the latest firmware yesterday but still am unable to open any ports.  I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports.  

View 2 Replies View Related

Linksys Wireless Router :: WRT160N V2 - Open Up Ports To Get Open Connection On Xbox

May 23, 2012

I have the port numbers but do not know how to proceed from there.   Router is a WRT160N V2.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G V8 - 192.168.1.1 Will Not Open?

Dec 10, 2009

Two days ago I was able to type this in my browzer (Safari, Macintosh)  and open the page.  Now for two days I have tried this again and get a massage that the server at this location (192.168.1.1 ) is not responding.  How can I get onto this page.  I need to change the settings on my WRT54G V8.

View 9 Replies View Related

Linksys Wireless Router :: E1000 Ports Won't Open

Apr 30, 2013

I tried forwarding ports 80, 443, 7001, 8888, 9901, and 9911 on my Linksys E1000 router but whenever I check my ports always come back as closed.  This happens even why I try to enable DMZ.

View 9 Replies View Related

Linksys Wireless Router :: Open Ports 443 And 80 On Wrt160n V3?

Jan 20, 2012

How do I open ports 443 and 80 on my wrt160n v3 router?

View 1 Replies View Related

Linksys Wireless Router :: E2500 Ports Won't Open

Nov 18, 2012

My LinkSys E2500 wont open my ports, I have tried DMZ mode but it still does not open any of the ports.

View 9 Replies View Related

Linksys Wireless Router :: To Open Up Ports For E1200

Jan 30, 2013

I am trying to open ports 53, 80, 88, 1863 and 3074 for my xbox.  I then run PFPortChecker by Portforward and it tells me the ports are not open.

View 9 Replies View Related

Linksys Wireless Router :: Open Ports On EA3500 For XBL?

Nov 13, 2012

The last few weeks I've been having problems with my 360 Slim. Sometimes it boots up just fine, other times it wont connect to XBL at all. Some days I have a open NAT, other days I have a moderate NAT.
 
I have followed the steps on the portforward website. I make a static IP and all that good stuff. I open the ports, using the IP address the Portforward static IP program gives me. After that...My computer stops working. It fails to connect me to any websites at all.I'm running a Linksys ea3500 router.

View 3 Replies View Related

Linksys Wireless Router :: Fail To Open Ports E4200v1

Jan 4, 2013

im moving over to VDSL.But now i cant open any ports on the E4200 no mather what i do.It worked with the previous modem, but now i cant open anything. all the ports seems to be closes, 80, 21 etc, and the ports i manually forrward.The previous modem was a ZyXEL P-2602HWT-F3, and the new one is a ZyXEL P-2812HNU-F3.If i connect directly into the ZyXEL P-2812HNU-F3, every ports seems to be open, port 80 is open, port 21 is open, but not on the E4200, and yes, i have tried open the FTP ports.I have tried the 30/30/30 reset on the E4200.

View 6 Replies View Related

Linksys Wireless Router :: Open Specific Ports On E4200?

Mar 5, 2012

How do I go about opening specific ports on an E4200?I'm having disconnect issues with a particular game, and the Customer Service drone thinks the ports required for the game aren't open. Nevermind the fact that it's worked fine for 6 months now, and the problem only started a few days ago.I figured I'd humor the idiot and open the ports, but all I can find is information on forwarding, not making sure the ports are open

View 3 Replies View Related

Linksys Wireless Router :: E3000 Ports Forwarded Are Not Actually Open

Dec 9, 2012

I have been using Linksys routers for quite some time now, and recently made a big upgrade from the WRT54G to the E3000. I am familiar with the 192.168.1.1 interface and its functionality. However, I recently noticed a problem: when I set a port to forward traffic to any IP address on my network and then check whether or not it is actually open (url...), I am told that the port is still closed. More interestingly still, the first port that I forwarded when I first got the router is listed as open, but the other half dozen or so are still considered closed. I have been trying to set up a file transfer protocol (FTP) server, but can't even get traffic to forward from port 21! I even tried using the pre-configured FTP drop down on the Applications & Gaming tab, but to no avail. Has anyone had similar issues, or perhaps an idea as to why only one port is forwarded when I have followed the same steps that I have been using for years?
 
I tried to get in touch with Technical Support about this issue, but was told that I needed to purchase a $30 subscription in order to qualify for assistance. I don't think that I should have to pay $30 to know why the same steps work with some ports but not with others.

View 9 Replies View Related

Linksys Wireless Router :: E1200 Ports Not Open On DMZ Mode?

Oct 17, 2011

I've DMZ'd my computer using the the E1200's Web Browser Config screen (192.168.1.1) yet when I try to test the ports not a single one is open.
 
I've used this test to see if they were open: [URL]
 
And almost none of them were. Is there any issue that could be causing this?
 
Also when I try to open a single port the site says it times out. Opening single ports didn't work either. I've also tried to DMZ via the IP and the MAC address of my PC and still no luck.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G Ports Falls Out?

Mar 12, 2013

I got an Wireless WRT54G now for a couple of years and i'm hosting a game server like minecraft for my self.Today i'd discovered something really weird.If i'm going to my Routor setting at : http://192.168.1.1 i'ts not working , if i restart my routor it works for 1 minute.Now if i start my server he is reading the port [ He said ] but... no-one can join..

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Ports Aren't Working?

Mar 24, 2013

I am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G.  I am unable to open any ports.  I upgraded to the latest firmware yesterday but still am unable to open any ports.  I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports.

View 1 Replies View Related

Cannot Open Ports On Linksys Router?

May 27, 2012

I have been trying to host games for some time now with no luck. I believe it is because i cannot open the proper ports. I own a Linksys BFSR41 Ver. 4 router. I have been trying to open ports, testing them on a port checker website and they are always listed as closed. I have followed the guide on portforward.com perfectly with no luck.I have disabled Block Anonymous Internet Requests.I have disabled my Windows firewall, and AVS. Still cannot open ports.I have also updated to the latest firmware. I am using Win-7 x64.

View 1 Replies View Related

Linksys Wired Router :: Befsr41v3 Cannot Open Ports Due To Internet Connection

Nov 16, 2011

i cant open my ports  because i have a internet connection that first goes to my router and then to my modem.

View 3 Replies View Related

Open Some Ports On A Linksys E1000?

Feb 7, 2011

I am trying to Open some ports on a Linksys E1000. When I run the Shield Up test to see the status of my ports the ones I want to open are closed which is normal but when i try to portforward any port the status goes from closed to stealth. That really does not make any sense to me why when trying to open a port it becomes even more secure then if I did not try to open it. I turned off the firewall and the only thing I see might be the wireless security on the router. I have no idea what that means tho so idk if it is even a firewall.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N - Ports Won't Open?

May 14, 2012

normally i have no trouble opening serten ports for gaming purposes but now i just cant seem to get them open
 
if i do  hyperlobby: (begin: 20999 ) (end: 21001 ) protocol: ( both) on my current ip address and select the active square
 
it should open port 21000 right?but if i check in game, it wont open, and if i check on internet for port checks it also says timed out, for some reason it wont open this port, also other game ports wont open anymore,not sure what router i got but i think this is the model :  WAG120N

View 1 Replies View Related

Linksys Cable / DSL :: Wrt54g When Open Adviser It Goes To Setup Wizard

Feb 28, 2012

I upgraded my router Linksys wrt54g to Linksys x2000. I was able to install the equipment with no problem, my problem is with the Linksys Advisor. When I open the adviser it goes to setup wizard, I get a screen that tells me to disconnect my old router which I have done. The next screen gives a list of routers to select from my router x2000 is not on the list. How can I get passed this screen? So I can use the adviser to set up other computers and printer.

View 1 Replies View Related

Open Ports Though No Router?

Apr 3, 2011

My reports say that my listen ports are blocked even though I removed my router already. I've enabled these ports in Windows firewall already. Why are they still blocked?

View 4 Replies View Related

What Does Open Ports Means In Router

Sep 12, 2011

by saying "open ports" in a router or PC or other Network System what we mean basically? what is opposite terminology, "closed ports"?-used or unused-sensitive-vulnerable or non vulnerable to attacks-exploited easily and when so may attacked and have much bad/serious consequences/results

View 2 Replies View Related

Can't Open Ports On Modem / Router

Oct 18, 2012

I am considered as a novice when it comes to networking, modems/routers etc.I have a Belkin Modem/Router, I need ports TCP 80, 2300 and UDP 2310 I think to be forwarded so I can play a certain game online (Age of Empires 3). I have tried DMZ mode for my pc and I can play the game online but only with DMZ enabled. Just some extra info.Belkin Modem/Router model : F5D7634-4A-H v2 (on the device)F5D7634-4-H v2 (01) (on the online settings (192.168.2.1))It has the latest firmware as I have clicked on the firmware update and it says "There is no new firmware update available for this Router!"

View 11 Replies View Related

D-Link DIR-615 :: How To Open More Than 24 Ports On This Router

May 14, 2011

 I want to open MORE than the 24 ports that the router configuration allows (DIR-615  Hardware Version: C2    Firmware Version: 3.03RU)?

View 14 Replies View Related

D-Link DIR-615 :: Cannot Open Ports On Router

Jul 16, 2011

cant open the ports 2300 -2400 (udp, tcp)on router. What I do isthe following.

1. Open ports on router in port forwarding.

2. Add the triggers as well  in  APPLICATION RULES with the ports. Triggers are 47624 and 6073.

3.  Try both Dis and Enable UPNP. Even try the DMZ enabled settings.

4. Disabling firewalls on Laptop and router. Try both ways on DMZ's(enable and disable) settings on router. Check everything.

Still when I check on websites about the ports and they are shown closed (NOT STEALTH). Router uses a firmware 4.0. I have a windows 7 64 bit system. I use wireless.

Note: All the steps are performed in a combinations manner to see if there is any possibility of opening ports.

View 3 Replies View Related

How To Open Udp Ports On Home Gateway Router

Aug 26, 2012

How to open udp ports on my home gateway router

View 3 Replies View Related

Linksys WRT54G When Plug Any PC Into Ethernet Ports It Doesn't Work

Feb 1, 2011

I have the Linksys WRT54G Wireless Router, when i hook my at&t modem to the modem port on the router the wireless portion of the router works, when i plug any pc into the Ethernet ports it doesnt work!If i plug the modem into the Ethernet port and plug other pcs into the other existing Ethernet ports it works by Ethernet but not wireless.

View 1 Replies View Related

Sagem FAST 1704 Router - Cannot Open Any Ports

May 1, 2011

I have been having trouble forwarding ports for different softwares and servers. I just upgraded my internet and my ISP sent me a new modem/router all in one. I am using a wired setup to my desktop. The router I am using is Sagem FAST 1704.

My ISP told me that they only give support for game consoles, the dumbest thing I ever heard since I don't pay for their internet so I can play games. Cannot forward a simple port. Port 100 in specific.

When I forward ports, I am certain that I'm typing in the right Ip address digit because I checked ipconfig. Then I check the 'canyouseeme' website and it tells me that the port is not open on my ip address. I have tried other means of checking to see if the port is open but they all tell me the port is closed. Once in awhile the port will be open but most of the time it isn't.

I plug in my older modems and it doesn't make a difference when I re-set up the port forwarding to the new IP so I guess it isn't a problem with the modem or router. I changed all my ethernet and phone cords and filters as well. My isp told me that they do not block ports.

My isp is Windstream. I cannot set up a static IP in network connections because when I do the internet doesn't work at all even if I set the exact same settings that are currently set. This happens with both modems I have. I do not use two devices at one time just the modem or the modem/router, there are no other computers connected and filters are on all phones/satellites. I am using Windows XP, not sure what other info you will need.

My isp keeps telling me they do not support setting up vpn's. I do not need support for that I just want to open a port. lol the next thing they told me is, you guessed it, "We do not support setting up VPN please contact your work IT........" which doesn't exist. I spoke to three of them and they all said the same thing, except one told me they were going to open ALL ports for me. That didn't happen.

View 7 Replies View Related

Belkin F6D4630-4 V2 Modem / Router - Ports Won't Open?

Dec 12, 2011

I just want to open up a few ports for Age of Empires 3 but no matter what I do the ports still stay closed.I have a Belkin F6D4630-4 v2 modem/router (firmware updated to 2.00.25) and I use https:[url].... to check my ports.

I've forwarded the ports 2300-2310 in my router (both TCP and UDP) using the 'virtual servers' thing.

I've disabled windows firewall.

I've disabled my AVG antivirus.

I've disabled and enabled this thing to see if it would make a difference:
"UPNP Enabling:

Allows you to turn the UPNP feature of the Router on or off. If you use applications that support UPnP, enabling UPnP will allow these applications to automatically configure the router." When I probe the ports from 2280 to 2330 using the Gibson research website, the ports I forwarded (2300-2310) say 'closed' and the others say 'stealth'. Why do they say CLOSED and not OPEN? There shouldn't be anything blocking those ports.

When I probe the ports from 2280 to 2330 with windows firewall ON, all of them say 'stealth', even though I've added those ports to the windows firewall exceptions.I just want those ports to say "OPEN" so I can join all games on Age of Empires 3 instead of coming up with the message "Failed to join game".

View 19 Replies View Related

Cisco Security :: 7606 - Unknown Open TCP Ports On Router

Oct 19, 2011

Any know how to close these open ports on my Cisco 7606 router? Any know what these TCP ports are used for?
:
49   - Not sure what this one is other than what IANA reports about TCP port 49
4510
4509
2222
:
I'm sure I could add an ACL to block communications to my router based on this ports but would rather figure out how to close 'em so this already overloaded router doesn't have additional processing.

View 3 Replies View Related

Linksys Wireless Router :: WRVS4400N / Automating (check Vpn) Through C#?

Apr 27, 2012

I would like to automatically check if the VPN is up or down, simple enough, and respond by bumping it, disconnecting and connecting, as needs be (not so simple I think).This through a C# program using HttpWebRequest and HttpWebResponse.It's simple enough to login to the VPN page using known credentials. Done deal. And also very easy to check a couple of known patterns in the VPN table.When I determine I need to bump the VPN, how do we simulate the form submission and/or call to the JavaScript programmatically?  we're using a Linksys WRVS4400N router, firmware version V1.1.13.

View 2 Replies View Related

Linksys Wireless Router :: WRT54GH How To Check All User

Oct 27, 2011

1st time use cisco router.Where to check the list of user connecting to the router?

View 6 Replies View Related

Linksys Wireless Router :: WRT160Nv2 / How To Check Password And Username

Jul 11, 2009

I am trying to access my Wireless router via 192.168.1.1  When it asks for username and password i did..

 Username: (BLANK)
Password: admin
 
But it didn't work, i think i may have changed the password at one time but im not sure. Is there anyway to check the password and username?

View 5 Replies View Related

Linksys Wireless Router :: E4200 - Check Who Is Connected To Network?

Sep 26, 2011

I can see who is connected via the physical ethernet ports on the E4200 router. However, is there a way to check who is connected to the wireless network.  Also is there a way to see rx/tx bytes statistics for all wired and wireless users (including ones that are no longer connected)? I've had the router for 3 months now and it works great but I find there isn't enough operational user info/stats on this router.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8960N / How To Open Ports

Feb 23, 2013

Region : Others
Model : TD-W8960N
Hardware Version : Not Clear
Firmware Version :
ISP :

Region : Sweden
Model : TD-W8960N
Hardware Version : Not Clear
Firmware Version :
ISP :

opening of some ports 25565 for minecraft so i can host games. i have try so solve this by my self but with zero progress. did enter the advanced setup and then i pressed on the NAT category and then i pressed on the ADD button and enter the following" [URL] and then i used a port checker to look if it worked but did not work?

View 2 Replies View Related

How To Allow All Ports To Open

Feb 2, 2013

How can I allow all ports to be open? I don't really want my 1811 to block any traffic. I tried the command access-list 1 permit any which allows me to surf the internet, but when I check my web server, and port 3389 (Remote desktop) on yougetsignal.com it says those ports are blocked.

View 6 Replies View Related

Open Ports To IP's On Games?

Mar 9, 2011

I was told i need to open certain ports to certain IP's,what ports need to be opened to what IP's for the folowing game as im close to giving up.The games are as follows - Call of Duty 4, Counter Strike 1.6 and Source, Warcraft III, and StarCraft 2

View 2 Replies View Related

How To Open Modem Ports

May 15, 2012

The problem is I don't know what to do to open my modem's ports because every single of them except of 80 is blocked,im having some latency problems on online games etc, I asked my ISP and they didnt probably understand what the port is they offered me changing my IP to PUBLIC IP for onetime payment, seeing as they probably dont know what the port is im confused now, will the public ip unblock the other ports?

View 19 Replies View Related

No Ports Seem To Open Up According To Routers GUI

Apr 6, 2012

No ports seem to open up when they are supposed to be open according to the routers GUI.When i use "port checker"-websites, they even say that port 80 is closed until i actively open it in the router, then it shows up as open. This however only applies to port 80, no other ports shows as open OR allow any traffic through.The same thing happens when the router is in DMZ.What I have done so far is google my butt off without any results, I have tried a new router, a new network card, formated, re-installed windows and made sure that my ISP is not blocking the ports that i have tried to open.My purpose of opening a port is to run a mumble server, which I have run on a Hamachi VPN so far, and that has worked fine.

View 10 Replies View Related

Unable To Open Up Ports?

Sep 15, 2011

I can't open up any ports.I've tried using applications such as Simple Port Forwarding, PFPortChecker and manually by opening my router gateway (192.168.1.1).I can open a port, but if I check whether the port is open, it says that the port is closed. I tried opening ports through Windows Firewall and even disabling firewall, still won't work.

View 14 Replies View Related

How To Open Ports For Multiple Ips

Nov 26, 2011

I have 3 xbox 360s in the house and im having nat trouble with them, i am currently using an actiontec pk5000, from centrylink. i need to know if there is a way to open all ports on this router or if i should get a router/switch that i can open the ports on and use dmz on the actiontec for the new router to make this work.

View 2 Replies View Related

Are Open Ports Dangerous?

Dec 6, 2012

I am thinking about opening a port for a certain multi-player game. I was just hoping to know if opening a port for this game could leave me vulnerable to hacking or other stuff like that.

View 4 Replies View Related

ADVERTISEMENT