Open Some Ports On A Linksys E1000?
Feb 7, 2011
I am trying to Open some ports on a Linksys E1000. When I run the Shield Up test to see the status of my ports the ones I want to open are closed which is normal but when i try to portforward any port the status goes from closed to stealth. That really does not make any sense to me why when trying to open a port it becomes even more secure then if I did not try to open it. I turned off the firewall and the only thing I see might be the wireless security on the router. I have no idea what that means tho so idk if it is even a firewall.
View 1 Replies
ADVERTISEMENT
Apr 30, 2013
I tried forwarding ports 80, 443, 7001, 8888, 9901, and 9911 on my Linksys E1000 router but whenever I check my ports always come back as closed. This happens even why I try to enable DMZ.
View 9 Replies
View Related
May 23, 2012
I have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies
View Related
Jul 26, 2010
I have a PS3, and i play allot of video games such as all COD game especially MW2. It says i have a strict or moderate NAT. My router is in the same room as the PS3, so i should have a Open Nat.Also i have another question, i bought this Epson printer from Best Buy, i was wondering if I can connect to it Wireless, but i think i cant connect to it wireless cause i dont see the WiFi Certification on the printer or anything hints that it can connect wireless
View 9 Replies
View Related
Feb 16, 2011
I've been searching off and on for the past couple months trying to figure out what we could do to our router to open our NAT, after having both the PS3 and Xbox 360 tell me I've got moderate NAT. I tried a DMZ with my PS3 having a static IP, I tried UPnP. I messed with firewall settings, to no avail.
I recently found something that did work however, on Google. Basically what happened was, I needed to reset the router and change a few settings on top of enabling UPnP I didn't know about(CTS Protection, remote management) how they could have anything to do with translation of data.
But like I said, after doing a huge step by step walk through, I was able to get open NAT in the network tests of both PS3 and 360(even though the PS3 obviously still says Type 2. It used to say Type 2, but it also used to have an error code at the bottom of the page). I've checked in games on each console, and they tell me I've got open NAT.
Now I still have one tiny problem. Red Dead Redemption. I play Red Dead Redemption online with two friends(who, incidentally, have the same router as me), and we haven't been able to communicate if we were using routers. We still can't, but I'm thinking that it's not my router anymore. I'm thinking his router has incorrect settings. Am I correct?
View 8 Replies
View Related
Aug 31, 2011
I have a linksys E1000 and i'm trying to open my NAT for xbox live. I mostly need it for call of duty: black ops because i cant connect to friends and i lag out of lobbies with friends. I've been trying to open my NAT for hours and nothing will work. ive tried forwarding ports, DMZ, UPnP, MTU sizes, and security things.
View 9 Replies
View Related
Feb 17, 2012
I have a E1000 and already for the longest time I've been trying basically everything possible to get my NAT open from being strict.I've looked around and tried everything I came across including the port forwarding. The only thing different from what I have and from what I have seen is that my router's ip is 192.168.0.1 instead of 192.168.1.1 that everyone else seems to have. I don't know if that affects my NAT in any certain way either. What I can possbily do or what might be the problem as to why I can't get my NAT opened?
View 1 Replies
View Related
Nov 14, 2011
I am having a NAT issue with my two xboxes. The router is an e1000 v2.1 firmware 2.1.02. One xbox is wired into the router and the other has a wireless adapter. The wireless xbox gets open nat automatically, while the wired one's nat is strict. If i mess with DMZ and turn UPnP off i can get the wired to be open but the wireless one to be strict. Also port forwarding does not seem to work because only one or the other xboxes will get an open NAT. I do have the the correct ports in the port triggering section set to on but that does not seem like it works.
View 5 Replies
View Related
May 27, 2012
I have been trying to host games for some time now with no luck. I believe it is because i cannot open the proper ports. I own a Linksys BFSR41 Ver. 4 router. I have been trying to open ports, testing them on a port checker website and they are always listed as closed. I have followed the guide on portforward.com perfectly with no luck.I have disabled Block Anonymous Internet Requests.I have disabled my Windows firewall, and AVS. Still cannot open ports.I have also updated to the latest firmware. I am using Win-7 x64.
View 1 Replies
View Related
May 14, 2012
normally i have no trouble opening serten ports for gaming purposes but now i just cant seem to get them open
if i do hyperlobby: (begin: 20999 ) (end: 21001 ) protocol: ( both) on my current ip address and select the active square
it should open port 21000 right?but if i check in game, it wont open, and if i check on internet for port checks it also says timed out, for some reason it wont open this port, also other game ports wont open anymore,not sure what router i got but i think this is the model : WAG120N
View 1 Replies
View Related
Jan 20, 2012
How do I open ports 443 and 80 on my wrt160n v3 router?
View 1 Replies
View Related
Nov 18, 2012
My LinkSys E2500 wont open my ports, I have tried DMZ mode but it still does not open any of the ports.
View 9 Replies
View Related
Jan 30, 2013
I am trying to open ports 53, 80, 88, 1863 and 3074 for my xbox. I then run PFPortChecker by Portforward and it tells me the ports are not open.
View 9 Replies
View Related
Nov 13, 2012
The last few weeks I've been having problems with my 360 Slim. Sometimes it boots up just fine, other times it wont connect to XBL at all. Some days I have a open NAT, other days I have a moderate NAT.
I have followed the steps on the portforward website. I make a static IP and all that good stuff. I open the ports, using the IP address the Portforward static IP program gives me. After that...My computer stops working. It fails to connect me to any websites at all.I'm running a Linksys ea3500 router.
View 3 Replies
View Related
Aug 23, 2012
I am using remote management to attempt to open port 8889 on my Linksys WRT54G router. I have successfully opened ports 22 and 80 with no problem. Additionally, I can close and reopen these ports without having to physically reset the router. However, if I try to open any other port (I have tried various ports: 23, 100, 8888, 8889, and several others) this port will not open. The ISP this router is connected to is Comcast and according to this site URL port 8889 isn't among the ports that Comcast blocks. I have tried everything I can think of to resolve this issue (short of manually resetting the router or restoring the default settings).
View 9 Replies
View Related
Mar 24, 2013
I am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G. I am unable to open any ports. I upgraded to the latest firmware yesterday but still am unable to open any ports. I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports.
View 2 Replies
View Related
Jan 4, 2013
im moving over to VDSL.But now i cant open any ports on the E4200 no mather what i do.It worked with the previous modem, but now i cant open anything. all the ports seems to be closes, 80, 21 etc, and the ports i manually forrward.The previous modem was a ZyXEL P-2602HWT-F3, and the new one is a ZyXEL P-2812HNU-F3.If i connect directly into the ZyXEL P-2812HNU-F3, every ports seems to be open, port 80 is open, port 21 is open, but not on the E4200, and yes, i have tried open the FTP ports.I have tried the 30/30/30 reset on the E4200.
View 6 Replies
View Related
Mar 5, 2012
How do I go about opening specific ports on an E4200?I'm having disconnect issues with a particular game, and the Customer Service drone thinks the ports required for the game aren't open. Nevermind the fact that it's worked fine for 6 months now, and the problem only started a few days ago.I figured I'd humor the idiot and open the ports, but all I can find is information on forwarding, not making sure the ports are open
View 3 Replies
View Related
Dec 29, 2011
I need to open four ports and have no idea how. My web host thought that my ISP was blocking them; the ISP says they are not and that it is teh router. I don't have pjone support anymore (WRT54G is old) so could not be walked through it by a tech support person.
View 1 Replies
View Related
Dec 9, 2012
I have been using Linksys routers for quite some time now, and recently made a big upgrade from the WRT54G to the E3000. I am familiar with the 192.168.1.1 interface and its functionality. However, I recently noticed a problem: when I set a port to forward traffic to any IP address on my network and then check whether or not it is actually open (url...), I am told that the port is still closed. More interestingly still, the first port that I forwarded when I first got the router is listed as open, but the other half dozen or so are still considered closed. I have been trying to set up a file transfer protocol (FTP) server, but can't even get traffic to forward from port 21! I even tried using the pre-configured FTP drop down on the Applications & Gaming tab, but to no avail. Has anyone had similar issues, or perhaps an idea as to why only one port is forwarded when I have followed the same steps that I have been using for years?
I tried to get in touch with Technical Support about this issue, but was told that I needed to purchase a $30 subscription in order to qualify for assistance. I don't think that I should have to pay $30 to know why the same steps work with some ports but not with others.
View 9 Replies
View Related
Oct 17, 2011
I've DMZ'd my computer using the the E1200's Web Browser Config screen (192.168.1.1) yet when I try to test the ports not a single one is open.
I've used this test to see if they were open: [URL]
And almost none of them were. Is there any issue that could be causing this?
Also when I try to open a single port the site says it times out. Opening single ports didn't work either. I've also tried to DMZ via the IP and the MAC address of my PC and still no luck.
View 9 Replies
View Related
Nov 16, 2011
i cant open my ports because i have a internet connection that first goes to my router and then to my modem.
View 3 Replies
View Related
Feb 9, 2012
I'm trying to open ports 2934 and 2935 UDP on my Linksys E1000 router in order to play Falcon 4: Allied Force multiplayer but it's not working.I've correctly created a static IP, and logged in to the E1000's page. Under "Applications & Gaming", and then under "Port Range Forwarding" I entered values thus:
[code]....
View 1 Replies
View Related
Feb 2, 2013
How can I allow all ports to be open? I don't really want my 1811 to block any traffic. I tried the command access-list 1 permit any which allows me to surf the internet, but when I check my web server, and port 3389 (Remote desktop) on yougetsignal.com it says those ports are blocked.
View 6 Replies
View Related
Mar 9, 2011
I was told i need to open certain ports to certain IP's,what ports need to be opened to what IP's for the folowing game as im close to giving up.The games are as follows - Call of Duty 4, Counter Strike 1.6 and Source, Warcraft III, and StarCraft 2
View 2 Replies
View Related
May 15, 2012
The problem is I don't know what to do to open my modem's ports because every single of them except of 80 is blocked,im having some latency problems on online games etc, I asked my ISP and they didnt probably understand what the port is they offered me changing my IP to PUBLIC IP for onetime payment, seeing as they probably dont know what the port is im confused now, will the public ip unblock the other ports?
View 19 Replies
View Related
Apr 6, 2012
No ports seem to open up when they are supposed to be open according to the routers GUI.When i use "port checker"-websites, they even say that port 80 is closed until i actively open it in the router, then it shows up as open. This however only applies to port 80, no other ports shows as open OR allow any traffic through.The same thing happens when the router is in DMZ.What I have done so far is google my butt off without any results, I have tried a new router, a new network card, formated, re-installed windows and made sure that my ISP is not blocking the ports that i have tried to open.My purpose of opening a port is to run a mumble server, which I have run on a Hamachi VPN so far, and that has worked fine.
View 10 Replies
View Related
Sep 15, 2011
I can't open up any ports.I've tried using applications such as Simple Port Forwarding, PFPortChecker and manually by opening my router gateway (192.168.1.1).I can open a port, but if I check whether the port is open, it says that the port is closed. I tried opening ports through Windows Firewall and even disabling firewall, still won't work.
View 14 Replies
View Related
Apr 3, 2011
My reports say that my listen ports are blocked even though I removed my router already. I've enabled these ports in Windows firewall already. Why are they still blocked?
View 4 Replies
View Related
Nov 26, 2011
I have 3 xbox 360s in the house and im having nat trouble with them, i am currently using an actiontec pk5000, from centrylink. i need to know if there is a way to open all ports on this router or if i should get a router/switch that i can open the ports on and use dmz on the actiontec for the new router to make this work.
View 2 Replies
View Related
Dec 6, 2012
I am thinking about opening a port for a certain multi-player game. I was just hoping to know if opening a port for this game could leave me vulnerable to hacking or other stuff like that.
View 4 Replies
View Related
Feb 9, 2011
I have this problem i can't open my ports on my D-link 524, i have opened about 6 ports so that my XBOX 360 works with a open nat, i have also set the DMZ to my xbox's IP which is static btw, my PC is also static. This is how i basically tested and it told me that it was not opened. I went into:
192.168.0.1 -> Advanced -> Virtual Servers ->
Enabled
Name: XBL1
Private IP: 192.168.0.100 ( because i was testing it on the computer - if it
were 360 it would be .141 )
Both UDP and TCP at port 3074
Schedule=Always
Apply -> Then restarts modem/router i waited for 2 minutes before turning them on again, i turned router on first because some guide told me to do that.
I did exactly what they did on portforwarding.com then i opened up portchecker and typed in 3074 and pressed check -> This port is NOT opened. What is wrong? This is how my net is set up.
Modem ZyXEL -> D-Link 524 -> D-Link DGS 1005D -> Computer/XBOX.
View 19 Replies
View Related
Feb 10, 2012
I have a Cisco 877 connected to a VSAT modem, and I can't open ports outside, I dont know why?The Cisco 877 Fa0 port is connected to the VSAT modem at VLAN9, and the rerst of ports are connected to the local lan network at Vlan2. I can enter to Internet, but I can't open port outside. ADSL over pots is not used here.I need to open port 81 for ip address 192.168.1.130 and I dont know why this isn't working. Also if I do: sh ip nat translations I see this:
sh ip nat translations
cisco877#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 172.30.xx.122:81 192.168.1.130:81 --- ---
udp 172.30.xx.122:81 192.168.1.130:81 --- ---
[code].....
View 5 Replies
View Related
