Two days ago I was able to type this in my browzer (Safari, Macintosh) and open the page. Now for two days I have tried this again and get a massage that the server at this location (192.168.1.1 ) is not responding. How can I get onto this page. I need to change the settings on my WRT54G V8.
View 9 RepliesI am using remote management to attempt to open port 8889 on my Linksys WRT54G router. I have successfully opened ports 22 and 80 with no problem. Additionally, I can close and reopen these ports without having to physically reset the router. However, if I try to open any other port (I have tried various ports: 23, 100, 8888, 8889, and several others) this port will not open. The ISP this router is connected to is Comcast and according to this site URL port 8889 isn't among the ports that Comcast blocks. I have tried everything I can think of to resolve this issue (short of manually resetting the router or restoring the default settings).
View 9 Replies View RelatedI am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G. I am unable to open any ports. I upgraded to the latest firmware yesterday but still am unable to open any ports. I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports.
View 2 Replies View RelatedI need to open four ports and have no idea how. My web host thought that my ISP was blocking them; the ISP says they are not and that it is teh router. I don't have pjone support anymore (WRT54G is old) so could not be walked through it by a tech support person.
View 1 Replies View RelatedI have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedI upgraded my router Linksys wrt54g to Linksys x2000. I was able to install the equipment with no problem, my problem is with the Linksys Advisor. When I open the adviser it goes to setup wizard, I get a screen that tells me to disconnect my old router which I have done. The next screen gives a list of routers to select from my router x2000 is not on the list. How can I get passed this screen? So I can use the adviser to set up other computers and printer.
View 1 Replies View RelatedI have all the ports open necessary and i have upnp enabled. my modem is a webmaster DPC2100 series.
View 2 Replies View RelatedI have opened my NAT for xbox using Port Triggering , but I cannot open my NAT for the PC because it uses no ports!I cannot host a match using any MMO game , and I cannot host any MW3/Black Ops matches too!
View 7 Replies View RelatedI have a WRT54G ver.5.(just did latest firmware) and a Buffalo Air Station wireless gaming adaptor.I have gone and port fowarded the UDP 88,UDP 3074,TDP 3074 I believe I have left the UPnP on (brother in law says not an issue)(?) On my XBOX 360 i have the IP & DNS set to Auto, and I get an OPEN setting on my NAT.But when I play online (Halo 3) I can't join any of my friends' parties,acting like it is STRICT. When I set up my IP & DNS to Manual and put in static IP & DNS, I run the tests and get STRICT. It seems to me that even though my NAT "says" its OPEN, it is really on STRICT.
View 4 Replies View RelatedGet my NAT set to open for MW2 for abit now but cant seem to figure out what the problem is. opening the NAT for this router for Modern Warfare 2 on the PC, not Xbox or PS3
View 7 Replies View RelatedI have a PS3, and i play allot of video games such as all COD game especially MW2. It says i have a strict or moderate NAT. My router is in the same room as the PS3, so i should have a Open Nat.Also i have another question, i bought this Epson printer from Best Buy, i was wondering if I can connect to it Wireless, but i think i cant connect to it wireless cause i dont see the WiFi Certification on the printer or anything hints that it can connect wireless
View 9 Replies View Relatedive tried all types of things i read online and it is stuck on moderate no matter what i do, im hooked into router directly, when i hook directly into modem it switches to open.
View 2 Replies View RelatedI've been searching off and on for the past couple months trying to figure out what we could do to our router to open our NAT, after having both the PS3 and Xbox 360 tell me I've got moderate NAT. I tried a DMZ with my PS3 having a static IP, I tried UPnP. I messed with firewall settings, to no avail.
I recently found something that did work however, on Google. Basically what happened was, I needed to reset the router and change a few settings on top of enabling UPnP I didn't know about(CTS Protection, remote management) how they could have anything to do with translation of data.
But like I said, after doing a huge step by step walk through, I was able to get open NAT in the network tests of both PS3 and 360(even though the PS3 obviously still says Type 2. It used to say Type 2, but it also used to have an error code at the bottom of the page). I've checked in games on each console, and they tell me I've got open NAT.
Now I still have one tiny problem. Red Dead Redemption. I play Red Dead Redemption online with two friends(who, incidentally, have the same router as me), and we haven't been able to communicate if we were using routers. We still can't, but I'm thinking that it's not my router anymore. I'm thinking his router has incorrect settings. Am I correct?
I have a linksys E1000 and i'm trying to open my NAT for xbox live. I mostly need it for call of duty: black ops because i cant connect to friends and i lag out of lobbies with friends. I've been trying to open my NAT for hours and nothing will work. ive tried forwarding ports, DMZ, UPnP, MTU sizes, and security things.
View 9 Replies View RelatedFor Xbox 360? currently, whether wired or wireless, my Xbox 360's NAT type is strict, and I am unable to do anything online whatsoever. Is there anyways to set up an exception, or anything that can open my Xbox's connection to my router so I can actually use it online?
View 2 Replies View RelatedI tried forwarding ports 80, 443, 7001, 8888, 9901, and 9911 on my Linksys E1000 router but whenever I check my ports always come back as closed. This happens even why I try to enable DMZ.
View 9 Replies View RelatedHow do I open ports 443 and 80 on my wrt160n v3 router?
View 1 Replies View RelatedI have a WRT120N router.it goes alright in connection wise but for my ps3 my Nat type is strict which wont let me join in some of my mate's partie's or host a game. And i REALLY wanna fix it by opening my nat. I've basically tried everything port forwarding but when you save it when port forwarding, it doesn't save like it look's like on the video's i have seen on YouTube.I've done that DMZ thing which also didn't work.I've basically done everything on YouTube and other site's.I'm just wondering if it's just the router. Or just the way i have it all setup because my router is setup in a different room with the computer which is hooked up with the modem and my ps3 is in my room which is a different room and is just connected threw WiFi my connection on the ps3 is wireless obviously.
View 7 Replies View RelatedI¨ve got an E3000 linksys (Sisco) router, but have some problem with the ICMP. I know this because I can not get access to the ports I'm opening from LAN pos. in the NAT setting. I'm running a windows 2008 server with my own homepage on and a FTP server.
View 4 Replies View RelatedI cannot get my NAT open for my xbox360
View 5 Replies View RelatedMy LinkSys E2500 wont open my ports, I have tried DMZ mode but it still does not open any of the ports.
View 9 Replies View RelatedI am at my wits end with cisco and linksys. I have had three different linksys routers over the years.I have a WRT160N, and now I think I made the mistake of buying cisco's latest product E3000. I thought by now their Upnp would be worked out for 180 dollars. But sadly no even their most expensive latest product doesn't do what I want. All I want is to hook up two xbox 360s and have open NAT which is what NAT is supposed to do. Still the NAT does not open up for both systems simultaneously which is absurd. I have a sb6120 for a modem. Both xboxes are hardwired to the router. Upnp should be enabled as this is part of the router. Also its job should be able to handle the two xboxes properly with one ip address that is its sole purpose.
I've tried one in dmz the other with static ip with forwarded ports that equals one open one strict.I've tried upnp enabled alone that equals one open one moderate.I've tried everything else the plan and simple fact is that it should work with upnp on and the nat in the e3000 will take care of the allocation of renaming ports to the single external ip address. By definition.
changing my nat type to open i have tryed so many solutions and none of them worked?
View 9 Replies View RelatedA external scan has reviled that I have an open port. For security reasons I want to close it. I do know the port number.
View 7 Replies View RelatedI need to get to my web admin page, but I cannot get into my router to do so.IE tells mt that there is a certifacte error, and then gives me the option of going in anyway.When I select that option, nothing happens, and the same IE warning page remains.I am plugged directly into an e-net port on the router, and it is a WRT160N.
View 1 Replies View RelatedI am trying to open ports 53, 80, 88, 1863 and 3074 for my xbox. I then run PFPortChecker by Portforward and it tells me the ports are not open.
View 9 Replies View RelatedI need to get to my web admin page, but I cannot get into my router to do so.
IE tells mt that there is a certifacte error, and then gives me the option of going in anyway.
When I select that option, nothing happens, and the same IE warning page remains.
I am plugged directly into an e-net port on the router, and it is a WRT160N.
The last few weeks I've been having problems with my 360 Slim. Sometimes it boots up just fine, other times it wont connect to XBL at all. Some days I have a open NAT, other days I have a moderate NAT.
I have followed the steps on the portforward website. I make a static IP and all that good stuff. I open the ports, using the IP address the Portforward static IP program gives me. After that...My computer stops working. It fails to connect me to any websites at all.I'm running a Linksys ea3500 router.
I got a new Xbox 360 Slim and he has it connected through wireless, and His older Xbox 360 connected through Ethernet. And well we would like to play some games online without some major lag. So is it possible to have an Open NAT with two Xbox's within the same network?He has a Linksys Wireless-N Broadband Router WRT160Nv3.
View 5 Replies View RelatedChanging the NAT Type to open because I can't play with some of my friends on Playstation.
View 1 Replies View Relatedchaning the NAT Type to open because I can't play with some of my friends on Playstation.
View 2 Replies View Relatedhow to change my nat from moderate to open so i can play xbox without any problems. But the weird thing is my nat used to be open but it changed to moderate and i have recently bought the linksys e2000 and it was open at first but not anymore.
View 9 Replies View RelatedI have a v1 WRT54GS And I am currently fustrated. After anouther laptop coming into this house my Xbox Live Functions have locked up from the NAT turning to Moderate. Now I have tried many things to change it but nothing seems to work. I am using the Microsft Wireless Adapter for the 360.
View 9 Replies View Related