For Xbox 360? currently, whether wired or wireless, my Xbox 360's NAT type is strict, and I am unable to do anything online whatsoever. Is there anyways to set up an exception, or anything that can open my Xbox's connection to my router so I can actually use it online?
View 2 Replieshow to change my nat from moderate to open so i can play xbox without any problems. But the weird thing is my nat used to be open but it changed to moderate and i have recently bought the linksys e2000 and it was open at first but not anymore.
View 9 Replies View RelatedSo currently I'm having issues with changing my nat type to open for my ps3. I've tried to use DMZ and port forwarding to change the nat type, but sadly I couldn't get this to work. Most the guides on the forums are for xbox's which wouldn't work for a ps3. Any handy guide to change my nat type to open for my ps3?
View 5 Replies View RelatedI have a WRT120N router.it goes alright in connection wise but for my ps3 my Nat type is strict which wont let me join in some of my mate's partie's or host a game. And i REALLY wanna fix it by opening my nat. I've basically tried everything port forwarding but when you save it when port forwarding, it doesn't save like it look's like on the video's i have seen on YouTube.I've done that DMZ thing which also didn't work.I've basically done everything on YouTube and other site's.I'm just wondering if it's just the router. Or just the way i have it all setup because my router is setup in a different room with the computer which is hooked up with the modem and my ps3 is in my room which is a different room and is just connected threw WiFi my connection on the ps3 is wireless obviously.
View 7 Replies View Relatedchanging my nat type to open i have tryed so many solutions and none of them worked?
View 9 Replies View RelatedChanging the NAT Type to open because I can't play with some of my friends on Playstation.
View 1 Replies View Relatedchaning the NAT Type to open because I can't play with some of my friends on Playstation.
View 2 Replies View RelatedRecently Ive been having issues with connecting to games on my PS3, Ive been trying to do things like Port Forwarding like I did on my old router but the way this router is set up is extremely different. On this router it seems there is no Port Forwarding it's now Port Triggering and it seems to require more info than Forwarding does.I should mention Im using a Router from Centurylink and I have no Admin powers, I can still go in and do things with ports but how I would change my NAT type or Port Trigger
View 1 Replies View RelatedI'm trying to change my NAT type on my PS3 from strict to open. My router is a WRT120N and I'm using cable internet
View 4 Replies View Relatedhow to open my NAT Type For my xbox.
View 3 Replies View RelatedI have three xbox 360s (mine plus my son and my daughter)...I have my settings set to where when myself and my son are on our 360s our NAT type is open..
View 2 Replies View RelatedI'm trying to change my NAT type on my PS3 from strict to open. My router is a WRT120N and I'm using cable internet. it down so I can understand what you're saying.
View 2 Replies View RelatedI just purchased a Linksys WRT120N and have a couple of issues, one of them may force me to return it to the point of purchase.Once WPA2 is enabled, on the Wireless-Advanced Wireless Settings screen,, the Authentication Type (which was greyed out by default) changed from Auto to Open and remained greyed out. I want to change this back to Auto.The other issue is that on the Status screen, the IP addresses of the domain name servers (DNS) are incorrect. This screen displays the DNS server addresses sent by the ISP and are not displaying the DNS addresses that are hard coded on the main Setup screen - although if I run nslookup, the DNS server address displayed in the console window, is the one that is displayed on the Setup screen.
The more important of the two is the Authentication Type being Open and greyed out. If this is something that cannot be changed, then I will be forced to return this for credit as it was the last unit on the shelf. I had reset the router back to the factory defaults and reconfigured it again, but this did not resolve either issue. I'm tempted to think that both issues may be the result of defective firmware, which shows version 1.0.06.
I have an E1200 and its been doing wired things like disconnecting itself randomly and i also need to set it so that the NAT type is open
View 1 Replies View RelatedI am having some issues with configuring static DNS on my e2000 router. When I configure the opendns addresses on static dns 1 and static dns 2 , all traffic, including traffic that should be internal to my network, gets routed to opendns. I tried to switch to staic setting and then putting in opendns into the dns server addresses but when you hit save it also sets the address and sends it along with DHCP to each pc.
View 9 Replies View RelatedI have the WAG120N, and I play Xbox online. I have tried so many things to get an open nat type, but the best i can get is moderate.
View 1 Replies View RelatedI have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedSo I use wireless internet because I don't have access to a phone jack in this room; therefore I can't use a ethernet connection.This is entirely random in nature and doesn't seem to be affected by anything I do (Disabling/Enabling firewall, forwarding the appropriate ports, creating a firewall exception and restarting modem/computer. It will be OPEN during a game, and then my wireless connection icon (signal bars) on the task tray will show a little yellow caution sign and then it will disconnect from the network, forcing me to open the list of available networks and reconnect. After this happens, my NAT will change to strict, and thus far I haven't been able to make it OPEN again. I'm at my wits ends here, nothing I do seems to have any effect at all on my NAT type.
View 5 Replies View Relatedhave one router WRT54G with firmware version v2.02.7, Feb. 27, 2004, and I'm trying to use this router to get my PS3 connected to the internet, but in the PS3 appears that I'm using NAT Type 3 and to enable some online features in my PS3 I must change it to NAT Type 2 (from the router configuration), I tried everything that I found (put my PS3 in DMZ zone, enabling TCP/UDP ports, enabling/disabling UPnP, disabling Media Server Connections in my PS3, etc.) and nothing works,
View 3 Replies View RelatedI have an e4200 and every once in a while a few files on my USB Hard Drive will change to an empty folder. What do I do to change the file back to its original format and what do I do to keep this from happening again later? I have photos that are not replaceable and do not want to lose them?
View 5 Replies View RelatedMy son plays Xbox and asked me to investigate settings on my router that will allow him better play on his Xbox LIVE. From what I've found out I need to trigger ports in my router settings.I have a Linksys E3000 router. His Xbox is plugged directly in from the router.
View 3 Replies View RelatedI dont know or understand how to change my nat type. I have the e3000 linksys router. My ps3 is running wireless off it. I want to change form nat 3 to 2
View 1 Replies View RelatedHow to change my NAT type from moderate to open for xbox 360. Belkin n450 dual band
View 1 Replies View RelatedChanging the NAT Type 3 to NAT Yupe 2 or 1 because I can't play with some of my friends on Playstation3
my router is: Cisco E4200
I've recently bought a Cisco WRT120N router and, like my previous router, the NAT type on my PS3 console is type 3 which means I can't connect to my friends.Does any one know how to change this? I have not port forwarded or anything, as I'm not sure how and do not want to mess up the router's settings.want to change the NAT type to Open or Type 1.
View 2 Replies View RelatedI have a Linksys E3200 and it is connected to the internet by Ethernet cable. Like that is what my ISP gave me. No DSL line or anything like that, just straight up Ethernet cable. I went from having slow internet and connecting to everyone to fast internet and cannot connect to anyone, only when someone that has a open NAT to host it for me even to connect. I have tried DMZ, port forwarding, disabling UPnP and enabling it. Also I can't connect to any of my friends that have the same ISP as me.
View 3 Replies View Relatedwe got two xbox 360 at home. the one in my room is wired to the router and the other one is in the other room wireless. Since I bought the EA4500 I been having the NAT problem.I bought it like 4-5 days ago. Before I had the E4200 and it was working fine on both consoles. Yesterday I did the Port Triggering and nothing changed, NAT type does not Open. One of the xbox sometimes has Open NAT Type and the other xbox Moderate NAT Type. I was using Cisco Connect Cloud but yesterday I went back to the classic layout.
View 9 Replies View RelatedI have an E1000 that is connected to my main computer via Ethernet and have found that it crashes almost every time I run a particular type of operation.I'm testing software and running PHP scripts that invoke cUrl to fetch data from a few different web services via SSL. I would say that at least every other time one of these operations begins, the router crashes -- I am unable to ping its internal IP and I have to power-cycle it to get back up and running.
I don't experience the crashes in any other context and I use the router all day long. I'm one release behind on firmware but the release notes on the most recent version don't suggest that upgrading would make any difference -- no mention of any bugs fixed, for example.
I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).
View 9 Replies View RelatedI would like to set the router's dns entries but I don't see how to do that. Basic setup page has DNS setep for the DHCP scope but I don't want to push dns to my pc's. What I am looking to do is to use an alternate dns to what my service provder pushes and still have the abliity to route on my internal network.
View 1 Replies View RelatedWe bought our Linksys E2000 in the summer and went to set it up but something came up... Now we are trying to set it up but cannot find our WPA key... Where can we find this?
View 2 Replies View RelatedSo i can only forward 10 ports on my E2000.Example, one game (Battlefield 3) requires 10 ports (TCP and UDP combined).What about my other games? how can one, if possible, add more ports to the router?
View 4 Replies View RelatedE2000. I run the setup program, my laptop sees the router and it shows a strong signal. When I try to connect with it, it won't connect.
View 9 Replies View Related