Linksys Wireless Router :: Xbox Live On EA4500 NAT Type Moderate?
Jul 30, 2012
we got two xbox 360 at home. the one in my room is wired to the router and the other one is in the other room wireless. Since I bought the EA4500 I been having the NAT problem.I bought it like 4-5 days ago. Before I had the E4200 and it was working fine on both consoles. Yesterday I did the Port Triggering and nothing changed, NAT type does not Open. One of the xbox sometimes has Open NAT Type and the other xbox Moderate NAT Type. I was using Cisco Connect Cloud but yesterday I went back to the classic layout.
My son plays Xbox and asked me to investigate settings on my router that will allow him better play on his Xbox LIVE. From what I've found out I need to trigger ports in my router settings.I have a Linksys E3000 router. His Xbox is plugged directly in from the router.
I have a Linksys E3200 and it is connected to the internet by Ethernet cable. Like that is what my ISP gave me. No DSL line or anything like that, just straight up Ethernet cable. I went from having slow internet and connecting to everyone to fast internet and cannot connect to anyone, only when someone that has a open NAT to host it for me even to connect. I have tried DMZ, port forwarding, disabling UPnP and enabling it. Also I can't connect to any of my friends that have the same ISP as me.
More often than not, when my son wants to play on Xbox Live, the Xbox won't connect to Xbox Live. It will connect to the network and the internet but not Xbox Live. After running the connection test, the suggestion is to reboot the modem and router. It works after rebooting those two devices. Why does this happen so often?
I'm having trouble getting our xboxes to show up as open on Xbox Live. I was able to do it for one xbox by assigning static IP and doing port forwarding, but this doesn't work for more than one. I have now done every option I can find and get the same result of moderate NAT no matter what. I have entered the ports in port range triggering, tried UPnP both on and off, filter anonymous internet requests is disabled, filter NAT redirection disabled, and have upgraded the firmware. I don't know if there is anything that can even be done at this point. On a previous router I had this issue was very simple and just had to disable a certain NAT box but with this new one nothing seems to work.
I have a E1000 and already for the longest time I've been trying basically everything possible to get my NAT open from being strict.I've looked around and tried everything I came across including the port forwarding. The only thing different from what I have and from what I have seen is that my router's ip is 192.168.0.1 instead of 192.168.1.1 that everyone else seems to have. I don't know if that affects my NAT in any certain way either. What I can possbily do or what might be the problem as to why I can't get my NAT opened?
I have a E1000 and already for the longest time I've been trying basically everything possible to get my NAT open from being strict.I've looked around and tried everything I came across including the port forwarding. The only thing different from what I have and from what I have seen is that my router's ip is 192.168.0.1 instead of 192.168.1.1 that everyone else seems to have. I don't know if that affects my NAT in any certain way either.
Why I can't get my NAT opened? Right out of the box, my NAT has always been strict. I'm thinking about returning all of my settings back to default and then trying everything over.
It worked fine for my PC's and Xbox, but I had disconnected my router for a while, plugged it back in and my xbox simply cannot receive any connection. I should also note that I use an ethernet cord (I don't use it wirelessly) and it has nothing to do with the ethernet cord (I've tried several). Using network magic, it does confirm that a connection to the game console and the router.I've looked through the forums and all of what I found, are NAT problems/issues or fixing a wireless issue, but not an issue when using an ehternet cord.
How I can block out Xbox Live at certain times? I want it to shut off at 9 pm cause sometimes I work late and my daughter cannot tell time. I do know which ports I need to block but when I put it in the blocked services and put it the allow time, it still blocks it all the time. I have the wireless router with speed boost but no version.
I have a problem when trying to connect my Xbox to the internet. When I run the Xbox Live conection test it connects to the network just fine, but when trying to connect to the internet it comes up with this message,Your console is not receiving ICMP responses properly.' The internet is working fine on other computers in the house.
Why I can't play online on xbox live. I'm set on going online but when I go on to play online for MW3(Modern Warfare 3) my NAT Type says strict,I can't join any of my friends games. It says to go on infintyward.com/Nat and when I do it doesn't show my model of linksys (WRT300N) i reset my xbox,my router and still nothing
I'm not having an NAT issue, but my e2000 is constantly disconnecting from XBOX Live. About every 3-5 minutes I get disconnected. My wireless is working perfectly, this is only an issue with XBOX Live.
[code]....
and I have double checked every setting. I've set the MTU, unchecked UPnP, entered port forwarding range to XBOX's static IP address, and set the DMZ to my XBOX's MAC address. So, what is causing my router to constantly disconnect?
I just recently upgraded my router from the WRT160n V3 to the E3000. I had to port forward from my old 160n to get my NAT settings from Xbox Live set to OPEN. When I switched out the router to the new E3000, my Xbox Live settings went back to Medium (Moderate). I assumed this would happend since its a new router/setup.
setup my E3000 and Xbox Live so I can have my NAT settings to OPEN? I only need to setup 1 Xbox.
I Have a WRT160Nv2 and I am trying to get my nat to become unstrict for xbox live. I have tried port fowarding that has not worked. I tried this site [URL] and that didnt work(I only have one xbox 360 btw). Nothing has worked for me and every time I mess with something it screws up the internet so I have to set it up to the previous defaults. I know how to access my router I just need to know what to enable, disable, or add to the router.
I have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that.
I have three xbox 360s (mine plus my son and my daughter)...I have my settings set to where when myself and my son are on our 360s our NAT type is open..
i have and original xbox 360 hardwired to my linkisis router. i can use xbox live silver with all the game marketplaces and all that but when i have gold and try to go on multiplayer it says xbox liv servers are unavailible. my internet provider is xplornet and i have avg anti virus on my laptop
I just upgraded yesterday to the DIR-655 (ver B1, F/W Ver 2.00NA), and suddenly my sons Xbox 360 complains that the NAT is set to moderate. I'm not really sure what this means, but I've never seen it before and it wasn't an issue with my old router. It pertains to the DIR-655? I did some quick google searches and I've seen lots of different 'solutions' to this issue, but none of them seem to agree with each other and I'd rather not spend and entire afternoon trying one after another given that this router kills my internet connection for a full 20 seconds every single time I make any change.
Ive been trying to work this out on XBL forum for a while. all my settings seem to be correct ( UPnP, NAT type: open, no port forwarding or triggering, IP settings on Xbox's are auto).
The two Xbox can play online separately, when either one of them attempts to join the others party it disconnects from Xbox live.
According to the microsoft website, Xbox live only supports the Hardware version 1A and Firmware: 1.00NA.
My router has B1 and 2.00NA. is there a way to downgrade?
Basically sometimes I suffer from serious lag! I want to best setting to get the most out of my modem. What are the reccomended setting for this modem?
i recently had att u vesre installed at my house with a 2 wire 3801 router/ modem but i cant get my xbox 360 online. how to configure the router for the xbox 360 so i can play xbox live.
I have router as mentioned in subject. Games i'm playing most online are assassin's creed brotherhood, assassin's creed revelations and both of them show to me i have moderate nat.Exact message in revelations is:
"Upload Bad Your game experience will not be satisfactory, you might will not be able to use voicechat. Try to limit the network traffic to enhance your performances.Second part of this message goes like that:
"Nat classification Moderate You will not be able to play or communicate with players who have strict nat."
When i connect internet to my pc directly via ethernet modem (asmax AR801MP) nat is opened.
My ISP is polish Dialog.
How should i configure this router to get in PC games nat opened? I already have firewall disabled. Router's firmware updated to latest available one v1.0.06
I have a v1 WRT54GS And I am currently fustrated. After anouther laptop coming into this house my Xbox Live Functions have locked up from the NAT turning to Moderate. Now I have tried many things to change it but nothing seems to work. I am using the Microsft Wireless Adapter for the 360.
I just bought a new television so thought I would finally be able to get to play xbox live in a television away from the router! But of course like always there is is problems....
I'll start off by saying I understand about bridging your pc's wireless connection to the router and the wired connection from the xbox to the pc. I did the same thing last year with my old laptop and it worked fine.
However the problem lies in that my computer isn't recognising the xbox as a network device atal! They are connected using an ethernet cable (and the orange light comes on at port when xbox is turned on) but the only thing showing up in networked connections folder on the pc is the actual internet!
I had read that sometimes an ordinary ethernet cable isn't enough and it must be a cross over cable used to connect the pc and the xbox, so went into the shop today and purchased an adaptor that changes the cable to a cross over... but still nothing is showing up.
My computer is fairly top of the range, windows 7 and uses a netgear usb network card.
I have tried everything, port forwarding, switching wires, and resetting my router. NOTHING WORKS! I get disconnected every 15 minutes and i can even send messages to people.
I got threatened by a few people for being good and my xbox live has been disconnecting a lot today and i've been unable to finish a game. then I looked into my router settings and saw this... 79 TCP- or UDP-based Port Scan So that means 79 times it did that, which is weird when you look at the rest of the router numbers.
blocking the ports and all that but that only works if the person is not connected and then attempts to connect.Looking for a way to disconnect while connected and blocking ports does not do that.I had a way where if I paired blocking ports with blocking certain websites xbox live uses it would kick xbox live off right away. Unfortunately I lost those sites.
I'm having an issue with my wireless connection.I was connected fine to my wireless internet on my desktop perfectly fine. I then attempted to connect to Xbox live at this time and that also worked fine.The connection began to get a little flaky (kept losing connection) so I reset my modem while they were both still connected.When the modem came back neither was able to connect.My other laptop, iPhone, and iPad also can no longer connect to the wireless.Windows troubleshooting tells me my DNS server is no longer responding. I'm assuming the desktop connection and Xbox connection are trying to connect to the same thing due to my reset, but I can't figure out how to fix it.
