D-Link DIR-655 :: Xbox 360 Reporting NAT Set To Moderate
Jan 8, 2011
I just upgraded yesterday to the DIR-655 (ver B1, F/W Ver 2.00NA), and suddenly my sons Xbox 360 complains that the NAT is set to moderate. I'm not really sure what this means, but I've never seen it before and it wasn't an issue with my old router. It pertains to the DIR-655? I did some quick google searches and I've seen lots of different 'solutions' to this issue, but none of them seem to agree with each other and I'd rather not spend and entire afternoon trying one after another given that this router kills my internet connection for a full 20 seconds every single time I make any change.
View 4 Replies
ADVERTISEMENT
Apr 5, 2012
My son plays Xbox and asked me to investigate settings on my router that will allow him better play on his Xbox LIVE. From what I've found out I need to trigger ports in my router settings.I have a Linksys E3000 router. His Xbox is plugged directly in from the router.
View 3 Replies
View Related
Feb 13, 2011
I'm having trouble getting our xboxes to show up as open on Xbox Live. I was able to do it for one xbox by assigning static IP and doing port forwarding, but this doesn't work for more than one. I have now done every option I can find and get the same result of moderate NAT no matter what. I have entered the ports in port range triggering, tried UPnP both on and off, filter anonymous internet requests is disabled, filter NAT redirection disabled, and have upgraded the firmware. I don't know if there is anything that can even be done at this point. On a previous router I had this issue was very simple and just had to disable a certain NAT box but with this new one nothing seems to work.
View 7 Replies
View Related
Jul 30, 2012
we got two xbox 360 at home. the one in my room is wired to the router and the other one is in the other room wireless. Since I bought the EA4500 I been having the NAT problem.I bought it like 4-5 days ago. Before I had the E4200 and it was working fine on both consoles. Yesterday I did the Port Triggering and nothing changed, NAT type does not Open. One of the xbox sometimes has Open NAT Type and the other xbox Moderate NAT Type. I was using Cisco Connect Cloud but yesterday I went back to the classic layout.
View 9 Replies
View Related
Dec 31, 2012
How to change my NAT type from moderate to open for xbox 360. Belkin n450 dual band
View 1 Replies
View Related
Nov 15, 2012
Ive been trying to work this out on XBL forum for a while. all my settings seem to be correct ( UPnP, NAT type: open, no port forwarding or triggering, IP settings on Xbox's are auto).
The two Xbox can play online separately, when either one of them attempts to join the others party it disconnects from Xbox live.
According to the microsoft website, Xbox live only supports the Hardware version 1A and Firmware: 1.00NA.
My router has B1 and 2.00NA. is there a way to downgrade?
View 4 Replies
View Related
Mar 20, 2011
I have just gotten a new touch phone that has wifi. and i wanna use it through my dlink dir-825 router. My phone is the nexus s with 2.3 andriod OS.The problem is that my phone can see the 2.4 ghz connection it just keeps reporting "deactivated" i did acess other wifi and used the internet over a router. So i know the phone works.
So my question is: 1. Can i make my router ONLY be in 2.4ghz mode, if so, can you link or explain it?
View 7 Replies
View Related
Feb 1, 2013
I set as the DMZ with a fiber optical setup through a 100MBps ethernet cord.
View 1 Replies
View Related
Aug 6, 2011
Wasted several hours after changing to a D-link DIR 825 router attempting to connect to my XBOX 360 (S) without success.Tried to use the 5 GHz broadcasting with following settings (the 5 GHz SSID didn't show up in the XBOX wireless list but I'm one of those ignorant trial & error:
- locked on 802.11n and WPA2,
- disabled Multicast Streams in "Advanced/Advanced Network",
- disabled WI-FI protected setup in "Advanced/WI-FI Protected Setup" (maybe unnecessary)
- disabled SPI and TCP & UDP Endpoint Independent i "Advanced/Firewall Settings/Firewall Settings"
In the end it was resolved by the info in solution 5 on the xbox page: The XBOX:es with built in wireless can only use the 2.4 GHz connection, and to be able using 5 GHz broadcast I apparently have to get the "black adapter".
View 3 Replies
View Related
Oct 11, 2012
i've got a Dell laptop and a few months ago i started experiencing higher ping on some games and some spikes on the internet, at first i blamed my isp but this has continues since then and my brother has reported no spikes or ping increases in the last weeks. I experience a 120 ping on speedtest.net (on average) to servers that i used to get up to 20 ping on and i experience 200 ping on league of legends servers that i used to get 100~ ping on.My laptop is running on windows 7, using panda antivirus and spybot search and destroy (i uninstalled mcafee).
View 2 Replies
View Related
Apr 28, 2011
I installed my DIR 655 today and had no problems accessing the network with any of my computers, however, I am completely unable to connect my xbox to the network. The issue isn't with connecting the xbox to xbox live, its with even getting it to connect to the wan.
[code]...
No matter what I do the xbox says it can't connect to the router, and in the router's wireless connections it shows my xbox's MAC address with an IP of 0.0.0.0.I installed my DIR 655 today and had no problems accessing the network with any of my computers, however, I am completely unable to connect my xbox to the network.
View 3 Replies
View Related
Jun 22, 2012
I own the DIR-655 version B1 (EU version) living in the UK.I play xbox, specifically in Halo Reach. My setup isn't straight forward as I have 2 xboxes in the house, one wired and one wireless and I need to keep the NAT ratings open on both. This limits me to certain settings, and doesn't allow QOS on the v2.00 firmware due to my need to have dynamic ip addresses.I have just flashed the router's firmware with new version (DIR655B1_FW205B06) as it appeared available for download in the router's firmware menu. The old version was FW2.00 as said.any other settings to enable or disable, for wired, or wireless, that will optimise for xbox gaming. Finally, I also have fw version DIR655B1_FW206B02, which was emailed to me by D-Link, if this is any better.
View 1 Replies
View Related
Jan 7, 2012
I've moved into a new apartment with a couple of people who already have wifi set up. They are adament about me not running a ethernet cable across the apartment to my room for my xbox 360. I have a DIR-601 from my last apartment, and I am wondering if there is a way to set up the router as an access point that allows me to connect to the existing wifi network and then wire my xbox 360 in.
View 4 Replies
View Related
Mar 26, 2011
Xbox is connected via ethernet to DLink. Router does not assign IP address to Xbox but does to all other wireless devices and wired computer. Xbox can connect to xbox live via direct connection to modem so cables and adapter are all good. Can't assign either static or dynamic IP address to Xbox. Have reset router to original config. Am at a loss of what else I can do?Have 2.01 firmware and have reset modem as well.PS....It has occasionally been connected in the past but currently no connection possible through router.
View 5 Replies
View Related
Feb 11, 2012
I've got an Open NAT but there's still some people i can't connect to (Xbox Live), i know theres a UPNP but it doesn't seem like it's doing anything.
View 1 Replies
View Related
Nov 25, 2012
I keep getting random moderate Nat sometimes, other times its opened. I have made a static Ip and port forwarded 4 ports that xbox uses. 88 udp..3074 both...53 both...80 tcp... Now when i test my connection on the xbox dashboard a message will come up saying make sure my UpNp is enabled, which it is and it tells me to make sure port 3074 is enabled which it is. I have restarted both my modem and router multiple times to try and fix this.
I have a linksys cisco e4200 and I recently updated its firmware which i thought would possibly fix the problem.I have talked to linksys but no luck.I have talked to my internet Cox Communication but they tell me its the router and i believe it is because when i directly connect my xbox to the modem i never get the moderate Nat. I have also talked to Norton about my virus protection because I thought maybe it was blocking some ports, but they disabled it and I still get the message.
View 4 Replies
View Related
May 25, 2012
I have router as mentioned in subject. Games i'm playing most online are assassin's creed brotherhood, assassin's creed revelations and both of them show to me i have moderate nat.Exact message in revelations is:
"Upload
Bad
Your game experience will not be satisfactory, you might will not be able to use voicechat. Try to limit the network traffic to enhance your performances.Second part of this message goes like that:
"Nat classification
Moderate
You will not be able to play or communicate with players who have strict nat."
When i connect internet to my pc directly via ethernet modem (asmax AR801MP) nat is opened.
My ISP is polish Dialog.
How should i configure this router to get in PC games nat opened? I already have firewall disabled. Router's firmware updated to latest available one v1.0.06
View 9 Replies
View Related
Aug 3, 2011
No matter what I try, I cannot get the DIR-655 to connect to my Xbox 360 Wireless N Adapter with N, only connects with G. If I use N only mode, it won't connect at all, even if I manually input the settings. Setting the security to WPA2 Only and setting the Cipher Type to AES doesn't work.
Hardware Version : A3
Firmware Version : 1.35NA
802.11 Mode : Mixed 802.11n and 802.11g
Enable Auto Channel Scan : Checked
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40
Visibility Status : Visible
Security Mode : WPA-Personal
WPA Mode : Auto (WPA or WPA2)
Cipher Type : TKOP and AES
View 14 Replies
View Related
Aug 8, 2011
How i can connect to my 5ghz wifi through my xbox ?
View 5 Replies
View Related
Oct 4, 2011
My netgear router kept dropping my internet connection so after some research I bought the DIR-655 router. It installed fine. My computer connects to the internet great and so does my xbox. But now my xbox doesn't see my PC so I can not set up a media center connection. I know it isn't a firewall setting or a setting on my computer because it worked fine with my old netgear router and the router I had before that. I even double checked by turning off the firewall. I have version 2.0 firmware and the settings are out of the box. I assume there is something I need to set up to get this to work but I have not been able to find any answers on the internet. I don't know a lot about networking as I've always used out of the box settings and had success with everything working the way I like.
View 6 Replies
View Related
Aug 20, 2011
I've been using the Dir-655 for 2 or 3 years with my old Xbox 360 and an external G wireless adapter. Everything was working perfectly until I got the dreaded Red Rings Of Death the other day. I replaced the Xbox with a new Slim version with built in N capable network adapter.
After more than 10 hours of trying a variety of "fixes" I found from MS and in this forum, I am still at square 1.
Hardware Version : A3
Firmware Version : 1.32NA (this is listed as Live compatible by Microsoft)
802.11 Mode : Tried N only, G only and mixed 802.11n and 802.11g
Enable Auto Channel Scan : Checked
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40
Visibility Status : Visible
Security Mode : WPA-Personal Also tried WEP
WPA Mode : Auto (WPA or WPA2) Also tried WEP
Cipher Type : TKOP and AES
I tried assigning an IP manually from the Xbox. But, no matter what I do, the router will not accept it. It is especially frustrating that the Xbox is visible to the unit. It simply will not assign an IP to it under any circumstance.
If you read the sales hype promoting the Dir-655, you will see a lot of nonsense about it being great for gaming. Given that, you'd think a simple solution would have been found and posted for this issue by now. Surely, end users shouldn't be trying 100 different possible "fixes", none of which work, at this late stage of the firmware upgrades. If I sound a tad fed up, it's because I am. After the expense of the new Xbox, it appears I now have to junk my router too.
Here is the status screen taken when it was in mixed mode. Changing it to 'G Only' didn't make any difference:
View 12 Replies
View Related
Mar 9, 2011
Is this router good for gaming with the Xbox 360 & PS3.My linksys wrt120 n is giving me fits I need a better gaming router.
View 2 Replies
View Related
Jul 19, 2012
I have recently bought a wireless N 150 usb Dlink adapter, i have installed the software and have conected it to my router using WPS (I do not know the passphrase). The adapter is working excellent but when I added the adapter, my old SSID (Dlink) got switched to Dlinkelb7. Dlinkelb7 has full bars when the old Dlink only comes up so often with one bar. Since the switch of Dlink to Dlinkelb7 my xbox 360 adapter has a very hard time connecting to Dlink and it will not connect to Dlinkelb7 because it needs a passphrase. My router is also Dlink Model DIR-615.
View 6 Replies
View Related
Dec 19, 2012
I just upgraded my dir-835 to the latest 1.03 firmware and it still not working.Plugged an ntfs firmated drive with films on it into the router and windows media player can see and stream from the router but xbox 360 is not detecting the media server !I tried with a dir 857 and xbox works fine but with the dir 853 no go
View 14 Replies
View Related
May 11, 2011
I've been trying to play Final Fantasy XI on my XBox 360 through this router. I have the latest firmware available. According to FF's tech support I need to port forward TCP and UDP 50000 through 65535. I've done this numerous times on my own and twice through D-Link support and am still getting disconnected.The game plays fine when it's connected directly to the modem, but as I'm not the only person in the house this isn't really an option.
View 3 Replies
View Related
Feb 12, 2012
I'm having trouble seeing my PC from my XBox (I want to use WMC to stream video to XBox). Here's my setup:
ISP provided modem (No branding), connected to my PC Network out (Wired) from modem to Dlink DIR-665 router (which is broadcasting WIFI) Network out (Wired) from Dlink router to XBox
I'm online with the XBox with no issue, but I can't access the PC through Media Centre with this setup. When I connect the XBox to the modem directly, I also have no issues. I'm using Norton Internet Security 2012 if that could be the issue.
View 15 Replies
View Related
Feb 17, 2008
I have a v1 WRT54GS And I am currently fustrated. After anouther laptop coming into this house my Xbox Live Functions have locked up from the NAT turning to Moderate. Now I have tried many things to change it but nothing seems to work. I am using the Microsft Wireless Adapter for the 360.
View 9 Replies
View Related
Apr 24, 2012
In my district, I have 11 schools running many LWAPPs and WAPs, connected to a single WLC and managed by WCS.Only the 4 LWAPPs in the administration building experience the following issue:When about 8-10 WiFi devices are present on one AP in the bulding (which usually happens during a meeting), all APs show a "Load Threshold Violation Error" and start dropping some clients intermittently and refusing to connect some new clients. There doesn't seem to be a pattern as to what sort of clients drop, or which ones can connect or re-connect. My WLC is on the same subnet as these LWAPPs since it is in the same building.
If I reboot the APs, this sets things back to normal for a while, but eventually the APs will show the same errors and the same connection problems occur. I have tried adding an LWAPP to our Boardroom, which is generally where users are located when the WiFi drops. For a while, this solved the problem, but it has since returned even with the additional LWAPP. Currently, I have all four LWAPPs in this building set to AP Mode H-REAP, as I do in my other schools. I understand this is normally bad practice; when your APs are on the same subnet as your WLC, generally those APs should be set to AP Mode Local. However, in my case, Local causes more drops and connection failures than H-REAP, so H-REAP is the closest thing I have to a "solution" to the problem.
I have checked the logs on my WLC and in WCS, and do not see any error messages besides the load threshold violations. I have tried increasing client count, and adjusting interference settings, but nothing seems to work. All LWAPPs are AIR-LAP1131G-A-K9 on IOS12.4(18a)JA2. WLC is Model 4404 on 5.2.193.0 firmware.
View 4 Replies
View Related
Aug 12, 2011
i have a little network knowledge but the tp-link wa-500g is proving quite a challenge to set up.i am trying to set it up in client mode to use with the xbox 360.thhe problem is i seem to set everything up correctly but it doesnt actually seem to work or to connect to the main router..which is a sky sagemfast router...(could this maybe be the problem? and if so how could i sort this? i have set a static ip on the tp.link and set up in client mode and "supposedly" connected to the main router in which is hard to figure out if it has or hasnt...also my sky router has wpa security and i am wondering if something has to be configured in my tp-link wa-500g to connect? but i can find no information on this needing to be done.
View 3 Replies
View Related
Aug 21, 2011
I'm attempting to connect an Xbox 360 console to a Linksys WRT54GL router (wirelessly), using a TP-Link TL-WA500G wireless access point. I've had this working in the past, but I didn't make a note of the configuration unfortunately. The Internet connection is connected to the router. The device hasn't been used for several months. During this time, I installed Tomato firmware onto the WRT54GL router, however I have since completely restored the router to factory defaults, by reinstalling the default firmware and performing a hard reset. Having reset the device, I was surprised to see that the Tomato favicon is still displayed when accessing the router's admin webapp.
View 1 Replies
View Related
May 25, 2012
Had to uninstall pure networks software as wouldnt work with new HP printer software 8600 at all. took me 2 days to figure that out. anyways I am a newbie when comes to networking. I finally got everything to work but I cant get the xbox to connect. I tried within the software at the IP address but nothing happens, DWA 552, Software version A2, Firmwre ve 1.1 os/ win xp media 2005.sp 3 computer: made by me: Intel BX97520J (bad axe) cpu: Intel quad, 6600 2.4 ghz,
View 1 Replies
View Related
Jan 29, 2011
I just upgraded my wireless router to a D-Link DIR-655. I have 2 PCs and a network storage device (D-Link DNS 321) connected via ethernet to the router. I also have an xBox 360 connected wirelessly to the router. The xBox is able to connect to the internet via the router, but it cannot connect to (see) the PC's or the network storage device. It was able to do so with my old wireless router (a Belkin), but it stopped with the DIR-655.
View 4 Replies
View Related
Dec 16, 2012
I have tried all firmware and go into router settings and it shows it's sending a wireless signal to Xbox. I have it connected via Cat5 cable.
View 5 Replies
View Related
