D-Link DIR-655 :: Showing Xbox Wireless When Connected By Cat5?
Dec 16, 2012I have tried all firmware and go into router settings and it shows it's sending a wireless signal to Xbox. I have it connected via Cat5 cable.
View 5 Replies
ADVERTISEMENT
D-Link DIR-655 :: Devices Connected Not Showing In Device Info List
Apr 26, 2011I just got a DIR-655 and set it all up pretty easily. I have 6 wired and 3 wireless. All work fine and all are set to use DHCP. But if I go (in the router) to the Lan Computers list under Device Info, three devices (2 wired, 1 wireless) do not appear. I do have a switch added to the system, but of the three devices connected to it, 1 shows in th Lan Computers list and the other 2 do not.Since everything works, I'm mostly just curious why this is. Every previous router I've had showed everything correctly.
View 3 Replies View RelatedD-Link DIR-601 :: 2 Xbox's Can't Join Same Party On XBox Live
Nov 15, 2012Ive been trying to work this out on XBL forum for a while. all my settings seem to be correct ( UPnP, NAT type: open, no port forwarding or triggering, IP settings on Xbox's are auto).
The two Xbox can play online separately, when either one of them attempts to join the others party it disconnects from Xbox live.
According to the microsoft website, Xbox live only supports the Hardware version 1A and Firmware: 1.00NA.
My router has B1 and 2.00NA. is there a way to downgrade?
How To Sort Xbox Live When Receiver Is Showing Red Light
Mar 3, 2011I have bought 2 white single ariel recievers for wireless xbox live and red light stays on both so cant be them so what am i doing wrong , i have had it working on a cable but not wireless
View 1 Replies View RelatedWireless :: Showing Connected But Can't Go Online?
Oct 3, 2012I recently got a toshiba satellite laptop running win xp.. at first when i connected it had internet..but after adding avg antivirus it began showing limited or no connectivity. ran antivirus ... cleaned up system..changed the ip addresses and now it says connected.. but i cannot go to google or any other online page. it says there is no response from default gateway or dns server... not sure what else to do . I tried rolling back system to before i did anything and still the same.
View 6 Replies View RelatedWireless Internet Says Connect Again But Computer Status Showing Connected?
Nov 3, 2012I am having trouble keeping my computer connected to the internet...even though it says my signal strength from my wireless internet is excellent. every time i get online i put in my url and it loads the page but if i click on anything on that page it asks me to connect again even though my computer says im still connected.
View 1 Replies View RelatedLinksys Wireless Router :: E3000 DHCP Client Table Not Showing Connected Device
Jan 10, 2011I upgraded to firmware version 1.0.03 I started to have this weird issue: I have four PCs connected to this wireless router via wireless G. They all run Windows 7 Home Premium. After a few hours I started to notice that the DHCP client table is empty even if all four PCs are connected to the internet. This causes a networking problem because one of the PC serves as a file server and it grants access by IP addresses. Not being able to "see" those computers, my access is denied.
View 2 Replies View RelatedD-Link DIR-655 :: Xbox 360 Wireless N Adapter Won't Use N Mode?
Aug 3, 2011No matter what I try, I cannot get the DIR-655 to connect to my Xbox 360 Wireless N Adapter with N, only connects with G. If I use N only mode, it won't connect at all, even if I manually input the settings. Setting the security to WPA2 Only and setting the Cipher Type to AES doesn't work.
Hardware Version : A3
Firmware Version : 1.35NA
802.11 Mode : Mixed 802.11n and 802.11g
Enable Auto Channel Scan : Checked
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40
Visibility Status : Visible
Security Mode : WPA-Personal
WPA Mode : Auto (WPA or WPA2)
Cipher Type : TKOP and AES
D-Link DIR-615 :: Wireless Adapter Interference With Xbox 360?
Jul 19, 2012I have recently bought a wireless N 150 usb Dlink adapter, i have installed the software and have conected it to my router using WPS (I do not know the passphrase). The adapter is working excellent but when I added the adapter, my old SSID (Dlink) got switched to Dlinkelb7. Dlinkelb7 has full bars when the old Dlink only comes up so often with one bar. Since the switch of Dlink to Dlinkelb7 my xbox 360 adapter has a very hard time connecting to Dlink and it will not connect to Dlinkelb7 because it needs a passphrase. My router is also Dlink Model DIR-615.
View 6 Replies View RelatedBroadband :: It Keeps Crashing And Showing That Not Connected?
Aug 17, 2011how do i start my computer from when it was purchased. it keeps crashing and it keeps showing that i am not connected even though i pay 24-99 each month
View 1 Replies View RelatedD-Link DIR-655 :: 4 Mbps Upload Via CAT5 But Only 1 Mbps Upload Via N-format Wireless?
Jun 30, 2011I just upgraded my cable modem from the Motorola Sufboard 5120 to the DOCSIS 3.0 capable 6120. Provisioned it with Comcast and their "Blast" service (supposedly it caps at 16 down, 2 up).
I had, in the past, used my desktop via N-format wireless (DWA-525 N-format PCI adapter and DIR-655 N-format router) to do a speedtest.net test. I was getting 16 down and 2 up (as advertised). When I switched to the 6120, I did a speedtest.net test again to see what kind of gains, if any, I was getting. Turns out, I was getting 20+ down (nice improvement) and 1/2 Mbps up (a fourth of what I used to be getting?). Called Comcast. They "sent signals" (don't they always?) and claimed that it fixed it. My download speeds increased a smidge (about 22), but my upload speeds were still .5. Called Motorola, they had me do a few things and now I get 1 Mbps up and 27 - 30 down via wireless.
My download speeds are great. I'm content with that. If I hardwire from the cable modem directly to a ****py old laptop, a speedtest.net shows 4 Mbps up. So why do I get such a high upload speed when hardwired (4 Mbps), but a fraction of it (1/4th) when wireless? I'm not using any other devices to sap bandwidth (some are connected -- i.e. another desktop, my Droid phone, etc., but aren't actively pulling packets). And why would it go from 2 up (on my desktop via wireless in the past) to only 1 up (via wireless now) when the setup is the same across the board (as best I recall) other than upgrading my cable modem.
Since I get 4 up when hardwired straight off the cable modem, I assume my DIR-655 is slowing me down somehow. How to pick up the pace a bit? I've already tried the standard "power cycling", etc.
Oh, and the reason I go wireless -- my cable modem and wireless router are in my game room in the basement for my PS3. My desktop computer (and the wife's desktop computer) are two floors directly above it in our "office". Signal strength is "excellent" ... always has been. And again, pretty much everything is the same.
[URL]
Can't Connect To Internet But Status Showing Connected
May 13, 2011So I'm trying to fix gateway laptop running Vista. The computer can connect both wired and wirelessly to the internet just fine. Sadly that's all it does. It doesn't let you use IE/Firefox/Skype or video games or anything. Every program acts like you're not connected. All signs seem to point towards it working just fine. I'm at a loss and can't figure out what's wrong with it.
Also, the internet works just fine if you start in safe mode with networking. You can use IE/Firefox just fine. I've tried turning off proxies and such but there aren't any as far as I can tell.
Cisco VPN :: ASA 5510 - Error Is Showing When VPN Is Connected
Oct 16, 2012I have configured remote access VPN with radius authentication in my firewall ( ASA 5510). When tried to connect the VPN with Cisco vpn client, the following error is showing,
"Error: Secure VPN connection terminated by Peer. Reason 433 (Reason not specified by peer)".
D-Link DAP-1522 :: Nothing Showing In Wireless Setting?
Mar 23, 2011I got a DAP-1522 and here is my situation. I have a wireless router connected to the internet downstairs. I want to extend the range by creating a new wireless network upstairs. So I want the DAP-1522 to connect to the wireless router, and then become another access point upstairs.
I was able to connect to the wireless router in the DAP-1522 setup wizard, but nowhere was I able to configure that actual DAP-1522 WIRELESS setup. Nothing ever showed up on the "Wireless Settings". Just "Save Settings" "Do Not Save Settings" and the rest of the screen empty. On the status page it does show it is connected.
Am I doing something wrong or will the DAP-1522 not do this?
D-Link DIR-615 :: Wireless Network Not Showing Up Anymore
May 24, 2011I've tried changing the settings on my DLink wireless router, resetting it and my cable modem (by unplugging them and plugging them in again), and even restoring my iPod, but I cannot find my home wireless network! Both my iPod and my PC can find other networks, but not my own.My network is WPA-2 only, which my iPod should be able to see. The cipher type is TKIP. My wireless channel is 2.437GHz (channel 6, I can't change it). I even tried resetting my network settings on my ipod, with no luck.My router is a DLink DIR 615 wireless router and my computer is a PC that runs Windows 7. The router is able to connect to the internet; it's just the wireless portion that isn't working.
View 11 Replies View RelatedNot Connected Showing In System Tray But Can Browse Internet Fine?
Feb 27, 2011the little computer icon in the system tray has a red "x" on it and says "not connected" BUT i can connect to the internet connect to websites just fine..why does it say not connected?
View 3 Replies View RelatedTP-Link Dual-Band Wireless :: Setup TL-WDR4300 Media Server With Xbox 360?
Feb 14, 2013Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4300_V1_121225
ISP : Ziggo
Set up the WDR4300 with a USB drive connected (Platinum MyDrive CP 500 GB USB 3.0).Enabled the Media server, shared the entire drive, stuck an test .avi on there.My laptop has no trouble playing it from the attached storage, my Xbox sees the folders and files, recognizes them as playable formats but then does nothing once I hit play to get the file going.If I copy the exact same file to the shared folders on my laptop, navigate from the Xbox to that location it streams within the second.Also tried the same thing with a 16 Gb USB thumbdrive, same result.
TP-Link WN722N USB Wireless Adapter Not Showing Any Networks?
Dec 31, 2012Having trouble with the TP-Link WN722N that I bought from Newegg. It doesn't show any networks on my desktop that runs on Win7. Took the drivers straight from the CD. It works fine on my other laptops and desktop.
View 4 Replies View RelatedTP-Link 150Mbps Wireless :: Router WR642G Ver 3.6 Not Showing QOS
Jan 26, 2013Region : Australia
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP :
I am posting this in the wrong place but thats only because I cant find the forum for the TL-WR642G ver 3.6 device.Basically I am unable to see any QOS configuration and I wanted to know if this is available to this model ?I know the ver 4.0 firmware update states that QOS is added but can I update a 3.6 device using a ver 4.0 firmware ?
D-Link DIR-615 :: Wireless Stats Showing TX Packets Dropped
Jan 27, 2012I notice that I have TX Packets Dropped only under the wireless section.This occurs when the wireless network is not in use also.I have tried many different channels, almost all of them.Im using wpa2-tkip+aes, mixed g and n network, auto 20/40, wps disabled.I understand about wireless interference also.wireless devices dont seem to have any issues though, not dropping from network.I usually get 4000 wireless TX drops a day. LAN and WAN show No TX drops
View 11 Replies View RelatedLinksys Access Point :: WAP54g Repeater Showing As Device But Is Not Connected
Jan 28, 2012I have a WAP54g set up as a repeater. It even shows in the WRT54g device list (Tomato firmware) as a WDS interface but nothing can connect to it. I have the repeater's MAC address in the AP and it's set to "Access Point + WDS" mode. I don't know what I could be doing wrong. Is it a conflict of DHCP on the AP vs static on the repeater?
View 1 Replies View RelatedNo Internet Access In Sony Vaio Though Wifi Is Connected Showing Full Signal
Dec 19, 2012I am facing a kind of weird problem!! My Sony Vaio was getting connected to my Home wifi network and I could access Internet without any problem. Its been few days now that I can't access Internet though it shows connected. It does connect with the Wifi without any issue and even show the full signal like before, but actually there's no internet access. No browsers (IE,Chrome,FF) load any webpage, no messengers work.
View 1 Replies View RelatedTP-Link TL-WN722N Adapter - XP Not Showing View Available Wireless Networks
Oct 6, 2011Have installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
View 7 Replies View RelatedTP-Link 300Mbps Wireless :: Media Server Not Showing Files?
Dec 22, 2012Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I have set up the router with a USB FAT32 Stick 8gb shared six folders with about 5gb of music inside the server only streams the first folder to the network and inside that folder all the MP3 files and another 2 sub folders but not others. Whats the reason for this is there a limit to the amount of files that can be shared if so this should be made clear in your
Vista Showing Normal Wireless SSID Plus Showing Second Unidentified Network
Feb 5, 2011my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
View 13 Replies View RelatedRun The Cat5 To A Linksys Router And Use Wireless It Fails?
Mar 4, 2012When I vacation in Florida my neigbour across the street gives me her wep key so I can use her internet. I have to sit by the window in order to get a signal. I purchased the range extender and set it up with her ssid and wep key I ran cat5 from that into the house. If i use the cat5 on a laptop it works fine. When I run the cat5 to a linksys router and use wireless it fails I can connet to the wirless router but no internet.
View 1 Replies View RelatedCat5 From Computer Receiving Wireless Signal?
Jul 18, 2011I have a computer that is directly connected to my internet broadband service via my router and modem. From that computer, by use of a router (of course), I have a wireless connection to another desktop computer in my home, about 90 feet away.From that remote wireless internet broadband connection, I'd like to connect to yet a third computer. That third computer will be 200 more feet away. I have a direct Cat5 wire from the wireless computer desktop to that point 200 feet away. I'm thinking of adding a computer at that point.So, that raises my question: Can a computer receiving a wireless signal, then relay or transmit that signal to another computer that is "hard wired" to it via a Cat5 wire?
View 8 Replies View RelatedTP-Link 300Mbps Wireless :: TL-WR841N - Router Disconnects And Stops Showing?
Dec 9, 2012Region : UnitedStates
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version : 3.12.5 Build 100929
ISP :
I have the WR841N v6/v7 Firmware 3.12.5 Build 100929
The router stops showing up after 30 minutes to 1 hour. If I switch it off and on , it starts working normally but again suddenly stops and cannot be detected after 30 mts- 1 hour.
D-Link DIR-655 :: Wireless Connection Showing Up N On Windows 7 But G On Router Status Page?
Sep 26, 2010My wireless connection for my laptop is showing upas N on Win 7 but G on DIR-655 status page??? I'm confused. Am I getting N speeds/coverage or stuck with G. If G, why? I've tried wiping my wireless network config. on Windows and reestablishing it, but no change. The DIR-655 config page shows my machine connected at 54 Mbps and Type as G
View 8 Replies View RelatedConnecting Modem With Cat5 Cable To Wireless Router?
May 23, 2012Have had ADSL installed through a router, connected the wireless router and it works fine Have since connected the original router via -120mtrs of CAT5 cable to extend to the house. Connection through LAN is fine into desktop however the minute we try to connect an additional wireless router the connection fails. We have even put the LAN from the second Wireless into the desktop and there is no connectivity.We have had a technician come to sort the problem, they advise that they have no explanation as to why the LAN works from the distance but the wireless does not. They have suggested that we need to cut the CAT5 half way and put an antenna up to connect the two routers.
View 1 Replies View RelatedTP-Link 300Mbps Wireless :: TL-WR1042ND - Media Server Not Showing File Extensions
Nov 28, 2012Region : Ukraine
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.15.1 Build 120618 Rel.41178n
ISP :
I'm having the problem to playback video files from Media Server on Samsung TV.And i found out the problem, that media server showing video files without extensions as avi or mp4.Windows Player somehow recognize video codec and container without extensions, but Samsung TV doesn't.
TP-Link Dual-Band Wireless :: WDR3600 Media Server Not Showing All Folders?
Mar 23, 2013Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
I have the WDR-3600 with a usb drive. I have updated to latest firmware 3.13.26. I am having problems with the media server. I have 331 folders shared in the Music folder. When I access it via the DLNA it will only show the first 123 folders. I can access all of the folders via network share but not via the media server. I have checked this on my music player and my android phone and tablet. Both of them can only see the first 123 folders.
Security Camera System - Convert Cat5 Ethernet To Wireless?
Aug 21, 2011I'm building a security camera system,which can connect to internet to be viewed from away.The camera receiver connects to the modem with a Cat 5 ethernet cable,which results in a cable running across the room. My modem is a wireless type,but the camera receiver only has cable support it seems.
Is there a device that I can use to get rid of the Cat5 cable in this scenario?