Having trouble with the TP-Link WN722N that I bought from Newegg. It doesn't show any networks on my desktop that runs on Win7. Took the drivers straight from the CD. It works fine on my other laptops and desktop.
View 4 RepliesHave installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
View 7 Replies View RelatedJust bought myself a TP-Link WN722N Wirless Adapter. Currently I have a Netgear WNA3100 connected which works fine but I to use the TP-Link to connect to a second network simultaneously.Here's the problem.The drivers installed just fine for the TP-Link adapter. Windows shows that its connected as a USB device (USB2.0 WLAN) and Network & Sharing Centre shows it is being "Wireless Network Connection 4"(The Netgear one shows as "Wireless Network Connection 2")However, when i try to use the TP-Link one to connect to a network, it doesn't show up in the "Network Connections" menu on the Taskbar, and when i disconnect the Netgear one it says that it can't find any wireless connections at all; note that "Network & Sharing Centre" still shows the TP-Link Adapter as being connected to the PC).Tried Reinstalling the TP-Link Software, updating it, etc. Restarted PC. Disabled Netgear connection. Physically Disconnected Netgear Adapter and still no luck.
View 2 Replies View RelatedI have a TP Link TL-WN722N 150mbps USB wireless adapter I use with my desktop. I've had it for about 6 months and it has been mostly fine with a few little problems. I recently went away for a few weeks and when I returned I found that my wireless adapter is running very slowly and disconecting from the router. It is an adapter problem as no one else in my house is having the same issues. When the adapter does run slowly the only way to speed it up is to unplug it and plug it in again. This puts it back to a bearable speed but usually this drops within 30 minutes.
View 1 Replies View RelatedI have a TP link TL-WN722N wireless adapter and it refuses to work on my win7 machine. I've tried installying the cd driver, all the relevant drivers on the TP link website, and the generic atheros driver. I've also tried manually installing all those drivers using device manager to no avail, and it says "a device attached to your system is not functioning"
But I know the physical adaptor is working because I was able to successfully install it onto another computer (it was a windows 8 preview version).
I have problems with my D-Link DIR 635 router. It shows up fine in list of networks on my girlfriends Mac and on my new laptop, but on my older laptop it doesnt show up at all (whereas a lot of other networks do). Seeing as my current laptop is being repaired at the moment, I need to be able to connect to the net with my old laptop too.
I run Windows XP Professional on my laptop, which is a Compaq Presario f700. why the network doesnt show up?
I've been running into an issue for the past week or so where my wireless adapter intermittently can't contact my router.When it occurs the network connection reads as having limited connectivity. I'm unable to send requests to load webpages, and videos and the like stop loading. Sometimes the network disconnects entirely. After this occurs, I can't connect again for a few minutes. My connection consistently reads as having 2-3 bars available. The issue tends to occur frequently, often every 15 minutes or so. Strangely enough, I have been able to play bf3 online for over 40 minutes without connection problems (I quit before any occurred - not sure if any would have). So far I've tried the windows troubleshooter, updating the driver to my wireless networking adapter, manually assigning my network address (tried 192.168.1.4, 192.168.1.5, etc), setting my 802.11b preamble to "Long only" and performing a system restore. I have rebooted my machine as well.
My technical specs are as follows:I'm running Windows 7 Ultimate N 64 bit edition with service pack 1. System has 8gb Ram, an i5-3570k processor and HD7850 graphics card. Motherboard is the Asrock Z77 extreme 4. My wireless network adapter is the TP-link TL-WN722N. The adapter was working fine for some time before this issue appeared.My router is an old U.S. Robotics Wireless MaxG Router. It seems to work fine with other computers in the household, although it does require fairly frequent power-cycling. Running ipconfig on the command prompt while the internet is working returns:
Quote:
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::293a:e9bb:ba5a:7536%14
IPv4 Address. . . . . . . . . . . : 192.168.2.5
[code]....
I've just installed windows xp pro sp 3 on my laptop and am going through installing the drivers for the problem devices. I've got everything installed minus the drivers for the sound card. I'm trying to connect to my wireless network and am not having much luck. I know the network is available because i'm on it right now sending this message. However with this new installation everytime i refresh i'm getting the "No wireless networks were found in range" message. I'm also not getting any yellow question marks in the device manager window for this device. I know the card works because it worked just fine with ubuntu before i wiped the hdd and installed xp ....
View 9 Replies View RelatedI have added a wireless network on my computer but it isn't visible from the networking connections drop down. Why?
View 3 Replies View RelatedI have my desktop using a TP-Link WN722N USB wireless adapter to connect to my modem router. I get to browse for about a minute before I get dropped. Windows Network Diagnostics tells me that the problem is that the Default Gateway is not found, and then restarts the Wireless adapter, reconnects, then the cycle of browsing for a minute and disconnecting continues. None of my other computers that are wireless are facing this issue. I have the latest drivers for the wireless adapter. I have Microsoft Security Essentials installed. This is the ipconfig /all when it is connected to the internet.
[code]....
Windows XP on an older Dell Latitude. All wireless settings appear to be on, yet "no wireless networks are found in range" All other devices in the house see the same 3 networks (mine, mifi, and next door), so this is specific to this machine.
Also, I normally keep this laptop docked, 95% of the time, and earlier in the week disabled the wireless (right click on icon, disable) as I normally do when connected to the dock, since it seems to perform faster (no testing, just my opinion)
Other factors: The computer got undocked without normal undock procedure taking place.
Don't know if this is related, but the sound wasn't working either the last few days I have redocked, rebooted, restarted, checked every possible config I can think of, checked the router to be sure that my device was still listed, etc.
I have a desktop with windows Xp and I too have no wireless networks come up in the box on the right hand side, I know the wireless Linsky cisco wifi is working as I have connected it to another laptop with Vista, but have tried everything to get it wireless and nothing works the Desktop works fine when hard wired?
View 2 Replies View RelatedI had a wireless network set up between my Dell D630 and a Del XPS M1210 with IS and worked fine. Then we sold the XPS and got a E4300. I set up a wireless network on it with IS and it also worked fine. Both laptops running XP. The E4300 has SP3 and the D630 was set up with SP2 but I upgraded to SP3. The network was difficult to connect at times so I had to bypass the firewall to connect. Once connected, IS worked fineHowever, latetly it refused wireless connection even though the connection was visible. I have now tried to set up a new wireless between the 2 but it doesn't even show when I refresh the wireless connections in range.
View 1 Replies View RelatedMy previous wireless card was D-Link brand, and worked great. I never ever had trouble with connecting, never had to think about it or mess with any software. It always ran silently in the background, and connected automatically without fail. The card got damaged when I moved my computer, so I bought this T-LINK brand because it had good reviews.First I installed it from the CD the recommended way--with drivers and software. It was able to connect after some fiddling around, but then it would periodically disconnect. The problem seems to happen every 10 minutes or so, or whenever I open a game or program (like Steam), or google chrome/internet explorer, anything that requires internet usage. Sometimes it would give me an error about the settings of the card not being the same as the network settings. I think I fixed that, and still it had the same problem (it should have automatically detected the settings though).
The only way to restart it was to unplug the card, wait 10 seconds, plug it back in, or to restart my computer. However, it would soon DC again. When it does so, its like the card just goes to sleep -- no more blinking green light. Also, I made sure that the drivers that came on the installation CD are current (which they are). Eventually, after playing with settings to no avail, I uninstalled drivers and software and then restarted my computer, then reinstalled just the drivers.At first it was unable to connect, but after moving the stand to a different USB slot, then refreshing my IP through cmd, it did connect. It then DCed once on its own. I was able to get it back up after pulling the card out of the USB stand and plugging it back in. Since then it has not DCed, but I am not holding my breath.
First I have to say, I absolutely hate the program that came with it. Windows does everything the program does, except 100% better. I am not surprised that its not DCing as much with just the drivers.Ah, I spoke too soon. While writing this post, I attempted to open a new tab in google and it temporarily DCed me five times in a row. Specifically, there is a little yellow triangle over a 5-bars good signal. Says it is connected (limited connectivity). This time, the little green light stays blinking. It eventually re-connected itself each time on its own (maybe when the IP refreshed itself?). Each time it happened I was trying to use google searchThe 6th time I was in the middle of watching a video on youtube (not sure it makes a difference). The DCing seems to happen a lot more when I am actually using the connection. Sometimes I cannot load a web page even when it
says I am "connected"[CODE]
recently my network adapter just stopped working. The wifi signal was really bad so i unplugged it and when i plugged it back in it doesnt even turn on. I've reinstalled the drivers and still it doesn't turn on. In device manager there is a yellow exclamation mark next to it and when i click on properties it says code 10. I used it on my laptop and it turns on but when i plug it in my desktop it doesn't seem to turn on.
View 1 Replies View RelatedTrying to create a wi fi zone in my apartment from my Virgin cable installation. Following their instructions on how to do this I can't succeed as the "view available Wireless networks" option does not appear on Windows XP
View 1 Replies View RelatedYesterday I booted up my new custom desktop and today I installed my wireless PCI card. The drivers are installed and it recognizes one or two networks in my vicinity, but my home network and probably about 10 more are not showing up. I tried re installing the drivers but no luck. I was able to get my network to appear about 50% of the time I searched. I also was able to rarely establish a connection, but the speed was extremely slow and was lost in less than a minute.
View 2 Replies View RelatedA couple of weeks ago, my laptop (vista) suddenly started not detecting any wireless networks anymore. Wired internet still works. Wireless suddenly went 'poof'.Since then, I tried basically everything. I rebooted the wireless adapter, rebooted laptop, the network is most definately in range of the laptop, updated the driver and all didn't work. Yes, the adapter is turned on, obviously. When I look into device manager, there are yellow exclamation marks next to the microsoft 6to4 adapter and the ISATAP adapter, so I also tried updating those. Didn't do anything. They still show a code 10. So i disabled both of them, also didn't work. I deleted and reinstalled both too. I even tried disabling 6to4 in the bios but didn't work.Device manager says my Intel (R) wifi Link 5100 AGN adapter works perfectly. Also updated it, un- and reinstalled it => no effect.
Though, even without those exclamation marks, i'm pretty sure my network doesn't send out much ip6 stuff, so it should still work... But it's not just my network at home, it simply won't detect any wireless networks anymore.Also tried windows recovery to put it back in the state before it wouldn't work anymore, but no effect.
When I'm home I can get online but it's slow webstar. I used to be able to get online at the local McDonalds with free wi-fi, real fast. Now, the connection list doesn't show the "FREE McDonalds" connection.
I have: Atheros AR5B97 Wireless Network Adapter, Windows 7 on ACER Aspire 7741z-4815. It has been updating until recently, don't know if it's because I haven't been online as often or what.
I'm trying to install my WMP600N wireless adapter. It's not showing up in my device manager. The thing is I've installed it in the past and ran into some driver issue which made me give up. But it showed up in device manager before so I know it's not a dead card. Right now, plug and play isn't working. How do I get a Wireless Connection to show up in my device manager? This is for my PC. I also have a couple drivers I could use but I don't know how to install them because they are not exe files. I can't select upgrade drivers because the network adapter isn't showing up in the first place.
I have tried unplugging and replugging, and also scanning for hardware changes in device manager.
I took this wifi adapter from a pc that isn't being used, and decided to plug it into one that is. While it was in the other pc, it worked, now that it's in this pc it doesn't detect ANY wifi networks. I decided to plug it into a laptop and it worked the minute the drivers were installed.The problems are as follows:
* When plugged into the pc, the adapter's utility app just says "Checking status" and no info being displayed thereafter.
* Windows says the device is working, but it does not come up in the Internet Access popup window in the task bar.
* No info comes up in Xirrus except for the name of the adapter.
I installed both the drivers that came with the adapter, and the latest drivers from windows update. Neither worked.It is a Billion BiPAC 3011N adapter.
My internet has been working fine until a few minutes ago, when my connection just vanished. I went to try and reconnect but my Belkin N Wireless USB adapter could not find any wireless networks to connect to. While searching for a connection, the light starts blinking like it is searching, but then it says that it can't find any. Also, when I plug in the adapter, a popup comes up saying that there are wireless networks nearby, but when I click it there are still none.
I've tried reinstalling drivers but still nothing. I'm not sure what else to try because I'm afraid I might mess something up even more.
I own a Dell Studio 1747, i7, 8GB, etc.It has a DW1520 Wireless-N half-mini card.Yesterday I encountered a problem with my wireless adapter when it stopped recognizing my home network (wireless), although it did recognize other networks as the neighbors.I did every reasonable step while trying to restart the router, then disable and enable wireless, then restarted the laptop.Nothing worked and it could not recognize the network nor to connect to it as a hidden network.After taking a (not so good) advise from a friend, I cleared the wireless network list and then uninstalled the adapter from the device manager.I then restarted again and counted on the Windows 7 (home, 64 bit) to re-install the adapter.
Since then I'm experiencing bigger trouble when I probably missed a driver or a device.I tried to download and install the drivers for the adapter from Dell's size and got "R249128.exe", then installed it. Still no change.I cannot enable the wireless connection at all and when doing a diagnose to the "Wireless Network Connection" I get the message: "There might be a problem with the driver for the wireless network connection adapter".Since I am clueless now, although I do plan to check with a Linux boot cd that the adapter is working.
I bought new laptop ( inspiron N4050 ) 1 month ago, bought access point to make home wireless signal from my wired TP LINK router every thing went good that time, now I wanted to change my windows from win7 prof to win7 ultimate so I had to format the system partition, now the problem is in the drivers, everything I got it working. except the wifi .. the lap wont show any wifi networks around it .. any wifi which I can connect to, while my mobile shows about 4 wifi networks besides mine.
you may need to know that the wired internet port when I plug a wire into it , it works .. I mean the wired net is working and also the bluetooth is working, but wireless net is not showing any networks I can connect to.
My wireless adapter sees all the networks within range but I am not able to see them listed under windows network connection and there cannot connect even to my own network.
View 1 Replies View RelatedYesterday, I changed over to my new ISP (Orange). I have installed their router but the Linksys Adapter can't find it?I have laptop which found the Orange router straight away so it is working correctly. Also, the laptop lists around 10 networks in the area.
The WUSB54GS adapter finds just 1 or 2 networks but never the new Orange network I have set-up.I've tried uninstalling and re-installing, downloading the version updates but nothing works.
Recently purchased a Lenovo Ideapad Y580 and performed a fresh install of Win 7 Premium 64-bit on a new SSD. Installed latest drivers for all hardware but discovered after the install that my wireless adapter wasn't able to find any wireless networks (it worked find under Windows 8 when laptop was first unboxed). My wired connection works fine though, I am able to connect up to my network without issue using a network cable. Also, I am able to connect to my home wireless network without issue using another laptop.In addition, the adapter icon in my tray shows a red-X on it. I've found many issues through web searches that suggest driver updates or hardware disable/enable steps but neither of these approaches have worked for me. I am holding off re-installing my OS until I've tried some more simpler and less time consuming options. [code] When I run a hardware test via the Intel Wi-Fi manual diags I get the following: "Wireless Hardware is not bound to transport driver".
View 1 Replies View RelatedWhy don't I see my wired LAN Adapter in device manager? I have an Ethernet port on my laptop, but I don't seem to have the adapter.
View 3 Replies View RelatedI have a HP G62 laptop with windows 7 and a Atheros AR9285 wifi adapter. The Wireless Assistant shows the WLAN as disabled. In the device manager, the adapter is listed as enabled. When I push the F12 key that turns on and off the wireless, the wireless assistant alternates between showing the WLAN as Off or Disabled. I tried disabling the adapter and re-enabling it from the device manager, but the wireless assistant still shows it as disabled.
View 3 Replies View Relatedmy new build i installed a TP-link 300mbps wireless card, it will only however be recognised as ethernet controller and not the normal network adapter. So i put an old wireless card from another PC into mine and it works without a hitch comes up with network adapter in device manager and installs fine, and the problem card was put into an older PC and worked fine just like expected. Im really unsure on what could cause this and im not to sure about buying another card just get incase
my system info is(not sure if it matters)
ASUS M5A99X evo R2
Phenom 965 BE
8GB kingston Hyper X 1600mhz ram
OCZ 650W bronze edition
Radeon 7770 OC
No network adapter showing in device manager
View 2 Replies View Relatedmy sons laptop wifi is showing error 31 and i cant get it to work
View 2 Replies View RelatedI am having vastro 460 with intel i3 and window 7 32 bit . try to install driver for network card but not working. ping is working but not showing it in device manger.
View 5 Replies View Related