HP G62 - Network Adapter Not Showing As Enabled
Jul 21, 2012
I have a HP G62 laptop with windows 7 and a Atheros AR9285 wifi adapter. The Wireless Assistant shows the WLAN as disabled. In the device manager, the adapter is listed as enabled. When I push the F12 key that turns on and off the wireless, the wireless assistant alternates between showing the WLAN as Off or Disabled. I tried disabling the adapter and re-enabling it from the device manager, but the wireless assistant still shows it as disabled.
View 3 Replies
ADVERTISEMENT
Dec 5, 2012
I have disabled / enabled and unistalled / installed and updated driver software but to no avail.It has been replaced, I have refreshed TCP/IP as per previous instruction found here and it did go a bit further, but now stuck as per below from CCX diagnostics Utility:
[code]...
View 19 Replies
View Related
Jun 15, 2012
I recently entered the realm of wireless networking for my desktops and was able to connect my personal desktop successfully. Unfortunately, the other desktop I really need to make wireless is having difficulties. The computer never shows the message that a new device is discovered/installed. The adapter shows up under hardware devices and functioning properly but this is not the case. I installed the driver from the included CD but when I use Windows to troubleshoot, it says that the driver and adapter aren't working. When trying to set up a new network, I get a grayed-out wireless icon in the system tray and can't proceed. I disabled the firewall and antivirus so I could start over, uninstalling the driver, restarting and installing again.
View 12 Replies
View Related
Oct 25, 2012
my new build i installed a TP-link 300mbps wireless card, it will only however be recognised as ethernet controller and not the normal network adapter. So i put an old wireless card from another PC into mine and it works without a hitch comes up with network adapter in device manager and installs fine, and the problem card was put into an older PC and worked fine just like expected. Im really unsure on what could cause this and im not to sure about buying another card just get incase
my system info is(not sure if it matters)
ASUS M5A99X evo R2
Phenom 965 BE
8GB kingston Hyper X 1600mhz ram
OCZ 650W bronze edition
Radeon 7770 OC
View 4 Replies
View Related
Mar 5, 2012
No network adapter showing in device manager
View 2 Replies
View Related
Nov 17, 2011
When I'm home I can get online but it's slow webstar. I used to be able to get online at the local McDonalds with free wi-fi, real fast. Now, the connection list doesn't show the "FREE McDonalds" connection.
I have: Atheros AR5B97 Wireless Network Adapter, Windows 7 on ACER Aspire 7741z-4815. It has been updating until recently, don't know if it's because I haven't been online as often or what.
View 1 Replies
View Related
Sep 13, 2012
I'm trying to install my WMP600N wireless adapter. It's not showing up in my device manager. The thing is I've installed it in the past and ran into some driver issue which made me give up. But it showed up in device manager before so I know it's not a dead card. Right now, plug and play isn't working. How do I get a Wireless Connection to show up in my device manager? This is for my PC. I also have a couple drivers I could use but I don't know how to install them because they are not exe files. I can't select upgrade drivers because the network adapter isn't showing up in the first place.
I have tried unplugging and replugging, and also scanning for hardware changes in device manager.
View 1 Replies
View Related
Jan 5, 2013
I have an acer M5641 desktop and i do not have a network adapter , i reinatall windows 7 basic premium and no success
View 1 Replies
View Related
Jan 14, 2011
the DNS error and was able to fix it but I have a new error. I currently use a Motorola SURFboard SB5101 USB Cable modem and am having an issue. I have tried repairing it and I receive a message "TCP/IP is not enabled for this enabled for this connection. Cannot proceed." I currently have 3 LAN or High-speed internet connections that are showing up. Two are the ones I have said earlier and the third is a Intel(R) PRO/100 VE Network Connection #2. All are connected and firewalled but I cannot use the internet.
View 1 Replies
View Related
Jan 4, 2013
have purchased Belkin wifi usb adapter dualband N450 and downloaded the driver from included CD, my OS is windows7 starterfter I plug in the adapter, the power ON is litting and wait for a while if will flashing but not. I opened the "NETWORK AND SHARING CENTER" and click the "CHANGE ADAPTER SETTINGS", the Belkin wireless adapter is disabled and had tried enabling it but still it is disable. I uninstalled the driver and the program, I checked in the internet and downloaded the file F9L1101v1_N600.exe and installed. Checked again but still the same problem before, Disabled and tried enabling but to no success.
View 3 Replies
View Related
Feb 5, 2011
my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
View 13 Replies
View Related
Jan 7, 2011
Why don't I see my wired LAN Adapter in device manager? I have an Ethernet port on my laptop, but I don't seem to have the adapter.
View 3 Replies
View Related
Dec 31, 2012
Having trouble with the TP-Link WN722N that I bought from Newegg. It doesn't show any networks on my desktop that runs on Win7. Took the drivers straight from the CD. It works fine on my other laptops and desktop.
View 4 Replies
View Related
May 12, 2012
my sons laptop wifi is showing error 31 and i cant get it to work
View 2 Replies
View Related
Oct 6, 2011
Have installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
View 7 Replies
View Related
Mar 13, 2013
I am having vastro 460 with intel i3 and window 7 32 bit . try to install driver for network card but not working. ping is working but not showing it in device manger.
View 5 Replies
View Related
May 3, 2011
I have been trying to re-establish my wi-fi connection for over a day now. I have a Dell Inspiron 1545 with windows 7 and it has two wifi adapters, one is the 1397wlan and the other is a virtual miniport adapter. My carrier is at&t uverse/2wire and my service was disconnected for about eight or nine days and since then I cannot get my wi-fi back. The desktop computer works fine but my network adapters are showing attempting to authenticate and not connected for the miniport adapter. I have tried enable/disable, restoring to a previous date, ipconfig/release, and of course running the trouble shooter for Microsoft. The result is that they can't assist with my connectivity issue and that its either the adapter or my router. I can use the laptop with the ethernet cord but its not practical as the router is downstairs and I primarily work upstairs.
View 2 Replies
View Related
Oct 29, 2012
I am using Dell Inspiron N4010 for more than a year now. It was running good. At office i am using wi -fi and at home i was using through cable connection. Fer last few days my wired connection was not working and i got all cable checked and replaced, but could not solve the problem. Then i found that in device manager, network adapters, its not showing and wired adapter. Only wi-fi and blue tooth adapters are there. I can still connect to internet at office via wi fi but its not working at home now with wired connection.I am not able to understand how it stops working and why its not showing in device manage (Network adapters).Yes one more thing i want to disclose is that earlier i have only one drive i.e. c drive wich few days back i compressed and created another drive.
View 4 Replies
View Related
Feb 12, 2011
have had a new HP G62-234DX laptop for about 4 months now and I'm now having problems connecting to the internet via ethernet. The lights do not come up when I plug it into the port and I have already tried to download the Ethernet driver from HP but it didn't seem to install properly, tells me it only works for Windows Vista which isn't true. I checked my device manager also and saw that I only have my wireless network adapter showing which works fine because I've been connecting wireless but I need a wired connection when I do not have wifi at my university. On device manager I chose 'show hidden devices' and I saw an unnecessary amount of "Microsoft 6to4 adapters" come up which does not seem right.
View 2 Replies
View Related
Mar 1, 2011
I had it working fine up until i decided to install a new harddrive on my xp pro machine. but to the point, when i connect to the 3g card its fine, but if i try to enable the lan at the same time it disconnects my 3g card. my problem isnt how to network two computers, its how to get lan and a usb modem working simultaneously. i have tried to enable ics, then reboot. same results. if i can get the lan to stay on while the 3g card is on i have the rest whooped.it is some kind of setting somewhere. maybe i need to install windows 2003 server or something like that.
View 9 Replies
View Related
Jun 12, 2011
I try to setup a network where both interfaces in my laptop are enabled. One is a wifi interface, the other is LAN. My WIFI is supposed to connect to a router that connects to a modem and the LAN interface is supposed to connect to my other PC.The problem with the configuration occurs when I try to access the internet, my laptop confuses not knowing where it should send the IP packets to the LAN or to the WIFI interface.What is the best solution for accessing the internet from my laptop (I don't care about accessing it from other PC) without change the topology? Should I configure the browser in my laptop so that it access internet through proxy?
View 2 Replies
View Related
Jan 22, 2011
My Toshiba laptop running Vista as an operating connects just fine to the wireless network at my house. However, I will soon be house-sitting at a house that also has security-enabled wireless available. I connect just fine at my house, but whenever I put in the password at their house it says that that it cannot connect because of a timeout. I can't figure out what the problem is, because I recently went to the public library that has wifi and got on just fine. why in the world it will not connect to this specific wireless router??
View 7 Replies
View Related
Feb 14, 2013
am trying to connect my laptop withgalax tab via mobile AP configuration, it give me this error {dhcp is not enabled for wireless network connection}
View 1 Replies
View Related
Apr 30, 2012
ive recently bought a tcl internet enabled tv. I have tried connecting it to the wireless network and it keeps giving me an error that the "connection failed due to timeout".
View 5 Replies
View Related
Aug 4, 2011
My wife and I Security Enabled our wireless network several months ago.We recently moved, and after transferring Internet service, we realized we'd lost our passkey.My wife's laptop has, after one failed attempt to connect to the network, refused to even show the network as an available connection.We currently have the router set to broadcast SSID.We have restored factory settings on the router and completely revamped the security setup.We've removed all other networks in the area as optional connections on her computer.We also replaced the ethernet cord to my desktop because the old one started erratically disconnecting.Nothing's worked.My wife's computer is a Dell laptop using Windows Vista.
View 6 Replies
View Related
May 27, 2012
Ever since I bought the E4200 months ago I had no wireless network between my laptops. pc's devices. I discovered now that I do have network (everything cool) when I disable NAT. That is all nice, but I don't have internet then.
View 8 Replies
View Related
Jan 23, 2011
I have a laptop that is running windows 7 premium and a desk top that is running xp pro. The laptop is connected to the internet but the desktop is not. I have them set up in a ethernet network through an RJ-45, and both are connected, but I can't seem to share the laptop's internet connection with the desk top. I've enabled internet sharing with the wireless network, but my desktop still cannot connect.
View 1 Replies
View Related
Dec 11, 2012
i use cisco vpn client software to connect my laptop to my company's network when i at home. using dsl modem.
i wonder if it is technically possible to connect my local printer to dsl router and in such a way establish connection between my laptop and printer?
View 5 Replies
View Related
Apr 9, 2013
I purchased a Linksys EA3500 about two months ago, brought it home and set it up with my DSL provider and everything was great, until sometime last week, and since then my download speeds have just plummeted to basically nothing. I did some troubleshooting but I cannot seem to find what the issue is. I have checked all the cables etc, and I know that it is definitely something with the router itself..My current Speedtest.net speeds are as follows (I am paying for a 5mb connection) with the EA3500.Ping of 15ms Download speed of .67mbps, Upload speed of .60mbps.When I remove the router and hook straight to the DSL modem I get the following results.Pink of 12ms Download speed of 4.89mbps, Upload speed of .60mbps
- I have tried to reset the router both by holding the reset button and through the configuration application.
- I have enabled and disabled wireless to see if that was slowing things down
- I have plugged in my old WRT54G and I get the 12ms, 4.89mbps,.60mbps results on it (so I know its the EA3500)
- I tried putting the computer in the DMZ
- I have changed the ports that the computer is plugged into
- I have disabled and enabled IPV6 on both router and network card
- Firmware version - 1.1.38.134141
View 9 Replies
View Related
Jun 29, 2012
I have upgraded to the new RV042G to take advantage of the gigabit Ethernet speeds and to prepare for when our ISP upgrades our bandwidth. I currently use the RV042 with Protect Link enabled to filter out various categories from our network traffic. I noticed that this feature is not included with the RV042G.
Is this something Cisco will decide to add back in later? In the meantime, how to block content on the network? The basic URL and keyword filter will not meet our needs, since it is much easier to let a service such as Trend Micro manage what is blocked in the categories they offer.
View 2 Replies
View Related
Aug 2, 2011
I can connect to internet only while wired. my wireless is no longer working. I have a network set up, named with my last name but it does not appear as a network i can connect to in the system tray. Instead there is the name of a network i did not establish (neighbors network??)I cannot connect to that without a security key whihc makes sense. I went into Manage Wireless Networks and mine islisted and marked as connect automatically.
View 1 Replies
View Related
Jun 21, 2011
i have gigabit cards on 3 pc linked by a gigabit router but all machine showing connection speed of only 100mbps
View 6 Replies
View Related
Aug 19, 2012
I have a desktop PC where the only internet connection is via a 'USB mobilebroadband dongle'.I have connected the PC via ethernet cable to the ethernet port on a d-link wifi router (which isn't connected to the internet).I'd like to be able to connect other non-PC devices (eg my mobile phone) to the router via wifi in order to connect to the internet.To do this, I gather that one possible solution is to bridge the LAN (not connected to internet) and dongle (connected to internet) connections.My first problem is that in 'Network Connections', only my USBdongle connection is shown (see pic) - there is no icon for the LAN/ethernet. In device manager, the "Atheros AR5007EG Wireless NetworkAdapter" and "Realtek PCIe FE Family Controller" are both showing without any ?
Other info:I'm running Windows 7 Home Premium 64 on a HP Pavilion All-in-one MS200 desktop.
View 6 Replies
View Related
