Connecting To Security-enabled Wireless Network
Jan 22, 2011
My Toshiba laptop running Vista as an operating connects just fine to the wireless network at my house. However, I will soon be house-sitting at a house that also has security-enabled wireless available. I connect just fine at my house, but whenever I put in the password at their house it says that that it cannot connect because of a timeout. I can't figure out what the problem is, because I recently went to the public library that has wifi and got on just fine. why in the world it will not connect to this specific wireless router??
View 7 Replies
ADVERTISEMENT
Jan 19, 2013
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies
View Related
Aug 4, 2011
My wife and I Security Enabled our wireless network several months ago.We recently moved, and after transferring Internet service, we realized we'd lost our passkey.My wife's laptop has, after one failed attempt to connect to the network, refused to even show the network as an available connection.We currently have the router set to broadcast SSID.We have restored factory settings on the router and completely revamped the security setup.We've removed all other networks in the area as optional connections on her computer.We also replaced the ethernet cord to my desktop because the old one started erratically disconnecting.Nothing's worked.My wife's computer is a Dell laptop using Windows Vista.
View 6 Replies
View Related
Dec 11, 2012
i use cisco vpn client software to connect my laptop to my company's network when i at home. using dsl modem.
i wonder if it is technically possible to connect my local printer to dsl router and in such a way establish connection between my laptop and printer?
View 5 Replies
View Related
Feb 1, 2011
We have a standard modem/wireless setup that has worked fine for years. Last month, my sister brought her laptop over and, for some unknown reason, choose "set up a connection or network" and unknowingly changed the setup to a security enabled network. I have no idea why she couldn't just log on without any problem. She has the same modem at her house, and I have no problem logging on at her house. Anyway, it now asks for a password, and she swears she never entered one. I can go online if I plug in an ethernet cord but that means my laptop can only go online at my desk. And I cannot use the internet features on my ipod touch. Is there a way to reset the modem back to a regular unsecured setup?
View 4 Replies
View Related
Feb 9, 2011
I am connecting my laptop to a wireless connection I am at connect to network. and enter network security key. do not know the security key
View 2 Replies
View Related
Feb 17, 2011
I have a new laptop and am trying to connect to the internet at our office. It is asking me for the network security key.
View 2 Replies
View Related
Feb 11, 2011
How do I find my network security key? I am trying to connect my "nooK" to my laptop, but it wants the password to my network. I thought I had it, but the nook won't accept it.
View 3 Replies
View Related
Apr 8, 2011
for example, there are 3 sites, A, B and C. A and B are 1.5 km apart and both are separate LAN(mixture of wireless and wired). C is 35 km apart from A and B. I have to connect A, B and C so that they can communicate with each other. Security is required.
View 8 Replies
View Related
Mar 17, 2013
I have a customer who just bought a pair of N5K and wanted to replace his current HP E3800 as Core. He wants to use the 4 x stacked HP E3800 connect back to the N5K. Will I be able to utilize VPC through a bundled 2 or 4 x 10G (40G) connection (10 or 20G on 1 switch, and 10 or 20G on another switch) from the stacked HP E3800s to the N5548s? I know you can do that with Cisco 3750s.
View 1 Replies
View Related
May 8, 2010
I want to block gtalk on my new cisco 2911 security enabled router.
View 3 Replies
View Related
Feb 14, 2013
am trying to connect my laptop withgalax tab via mobile AP configuration, it give me this error {dhcp is not enabled for wireless network connection}
View 1 Replies
View Related
Apr 30, 2012
ive recently bought a tcl internet enabled tv. I have tried connecting it to the wireless network and it keeps giving me an error that the "connection failed due to timeout".
View 5 Replies
View Related
Jun 15, 2012
I recently entered the realm of wireless networking for my desktops and was able to connect my personal desktop successfully. Unfortunately, the other desktop I really need to make wireless is having difficulties. The computer never shows the message that a new device is discovered/installed. The adapter shows up under hardware devices and functioning properly but this is not the case. I installed the driver from the included CD but when I use Windows to troubleshoot, it says that the driver and adapter aren't working. When trying to set up a new network, I get a grayed-out wireless icon in the system tray and can't proceed. I disabled the firewall and antivirus so I could start over, uninstalling the driver, restarting and installing again.
View 12 Replies
View Related
May 27, 2012
Ever since I bought the E4200 months ago I had no wireless network between my laptops. pc's devices. I discovered now that I do have network (everything cool) when I disable NAT. That is all nice, but I don't have internet then.
View 8 Replies
View Related
Jan 23, 2011
I have a laptop that is running windows 7 premium and a desk top that is running xp pro. The laptop is connected to the internet but the desktop is not. I have them set up in a ethernet network through an RJ-45, and both are connected, but I can't seem to share the laptop's internet connection with the desk top. I've enabled internet sharing with the wireless network, but my desktop still cannot connect.
View 1 Replies
View Related
Apr 9, 2013
I purchased a Linksys EA3500 about two months ago, brought it home and set it up with my DSL provider and everything was great, until sometime last week, and since then my download speeds have just plummeted to basically nothing. I did some troubleshooting but I cannot seem to find what the issue is. I have checked all the cables etc, and I know that it is definitely something with the router itself..My current Speedtest.net speeds are as follows (I am paying for a 5mb connection) with the EA3500.Ping of 15ms Download speed of .67mbps, Upload speed of .60mbps.When I remove the router and hook straight to the DSL modem I get the following results.Pink of 12ms Download speed of 4.89mbps, Upload speed of .60mbps
- I have tried to reset the router both by holding the reset button and through the configuration application.
- I have enabled and disabled wireless to see if that was slowing things down
- I have plugged in my old WRT54G and I get the 12ms, 4.89mbps,.60mbps results on it (so I know its the EA3500)
- I tried putting the computer in the DMZ
- I have changed the ports that the computer is plugged into
- I have disabled and enabled IPV6 on both router and network card
- Firmware version - 1.1.38.134141
View 9 Replies
View Related
Feb 4, 2012
How can i connect to a wireless internet security keys
View 1 Replies
View Related
Aug 20, 2012
I'm trying to connect a new laptop to my wireless router and internet but don't know how to find the security key it asks for
View 1 Replies
View Related
Dec 5, 2012
I have disabled / enabled and unistalled / installed and updated driver software but to no avail.It has been replaced, I have refreshed TCP/IP as per previous instruction found here and it did go a bit further, but now stuck as per below from CCX diagnostics Utility:
[code]...
View 19 Replies
View Related
Jul 21, 2012
I have a HP G62 laptop with windows 7 and a Atheros AR9285 wifi adapter. The Wireless Assistant shows the WLAN as disabled. In the device manager, the adapter is listed as enabled. When I push the F12 key that turns on and off the wireless, the wireless assistant alternates between showing the WLAN as Off or Disabled. I tried disabling the adapter and re-enabling it from the device manager, but the wireless assistant still shows it as disabled.
View 3 Replies
View Related
Mar 1, 2011
I had it working fine up until i decided to install a new harddrive on my xp pro machine. but to the point, when i connect to the 3g card its fine, but if i try to enable the lan at the same time it disconnects my 3g card. my problem isnt how to network two computers, its how to get lan and a usb modem working simultaneously. i have tried to enable ics, then reboot. same results. if i can get the lan to stay on while the 3g card is on i have the rest whooped.it is some kind of setting somewhere. maybe i need to install windows 2003 server or something like that.
View 9 Replies
View Related
Jun 12, 2011
I try to setup a network where both interfaces in my laptop are enabled. One is a wifi interface, the other is LAN. My WIFI is supposed to connect to a router that connects to a modem and the LAN interface is supposed to connect to my other PC.The problem with the configuration occurs when I try to access the internet, my laptop confuses not knowing where it should send the IP packets to the LAN or to the WIFI interface.What is the best solution for accessing the internet from my laptop (I don't care about accessing it from other PC) without change the topology? Should I configure the browser in my laptop so that it access internet through proxy?
View 2 Replies
View Related
Jun 29, 2012
I have upgraded to the new RV042G to take advantage of the gigabit Ethernet speeds and to prepare for when our ISP upgrades our bandwidth. I currently use the RV042 with Protect Link enabled to filter out various categories from our network traffic. I noticed that this feature is not included with the RV042G.
Is this something Cisco will decide to add back in later? In the meantime, how to block content on the network? The basic URL and keyword filter will not meet our needs, since it is much easier to let a service such as Trend Micro manage what is blocked in the categories they offer.
View 2 Replies
View Related
Dec 24, 2011
I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
View 3 Replies
View Related
Jan 1, 2013
When am connecting the wifi connection asking security key what it means?
View 2 Replies
View Related
Jan 4, 2012
Cant find Security Key. Trying to connect new TV to internet.
View 1 Replies
View Related
Oct 29, 2012
Having an issue with a Cisco Linksys E1500 on a home network. The device has a feature to provide a guest wireless network but the guest network can't get to the internet. A wired connection is fine, as is the normal wireless network but not the guest. The cheesy thing is, that it doesn't list an option for what type of wireless security protocol you want on the guest network. I'm assuming that it uses the same security protocol that the normal wireless network uses, but who knowsEspecially weird is that it asks you what password you want on the guest network but then the guest network show to be insecure when you try to connectthought maybe it was something funky with some of my configurations so I went ahead and factory defaulted it and just set it up with an insecure network for both the normal and guest networks. This didn't solve it. The guest network still couldn't get to the internet. In fact, the guest network can't even ping the router.
View 1 Replies
View Related
Jul 6, 2012
I'm finished with formatting my computer to install a clean Windows 7 Ultimate. Then, I connect my PC to the modem I have, to browse the Internet of course. Well, everything runs fine on the first start, let's say I have installed Google Chrome, Microsoft Office, and some other software I still not installed it. And when I restart it and tried to run Google Chrome for example, it said "Google Chrome has stopped working", it's happened to almost every software in my PC, let's say I tried to install VirtualDJ, then the Installer is corrupted, so was the Google Chrome installer and Microsoft Office Installer. Before they are all corrupted, there was a suspicious thing named 'winblmguf.exe' trying to access the Internet through my firewall.
View 6 Replies
View Related
Nov 19, 2011
how to find the network security key,wireless network
View 1 Replies
View Related
Jul 24, 2012
What is the security key for wireless network?
View 1 Replies
View Related
Dec 6, 2012
When i connect to my wireless network,it asking for security key. How can i find security key?
View 1 Replies
View Related
Sep 14, 2011
So I just got a wireless presentation gateway wpg 120 to connect to projector wirelessly. For me to connect to the projector i need to set wireless network to its wireless connection. But if I connect to wpg 120's connection, there is no internet access.Is there any way I can connect to two wireless network or use wpg 120 to connect to internet using it's connection.
View 3 Replies
View Related
