I have disabled / enabled and unistalled / installed and updated driver software but to no avail.It has been replaced, I have refreshed TCP/IP as per previous instruction found here and it did go a bit further, but now stuck as per below from CCX diagnostics Utility:
[code]...
I had it working fine up until i decided to install a new harddrive on my xp pro machine. but to the point, when i connect to the 3g card its fine, but if i try to enable the lan at the same time it disconnects my 3g card. my problem isnt how to network two computers, its how to get lan and a usb modem working simultaneously. i have tried to enable ics, then reboot. same results. if i can get the lan to stay on while the 3g card is on i have the rest whooped.it is some kind of setting somewhere. maybe i need to install windows 2003 server or something like that.
View 9 Replies View RelatedI have a HP G62 laptop with windows 7 and a Atheros AR9285 wifi adapter. The Wireless Assistant shows the WLAN as disabled. In the device manager, the adapter is listed as enabled. When I push the F12 key that turns on and off the wireless, the wireless assistant alternates between showing the WLAN as Off or Disabled. I tried disabling the adapter and re-enabling it from the device manager, but the wireless assistant still shows it as disabled.
View 3 Replies View RelatedI recently entered the realm of wireless networking for my desktops and was able to connect my personal desktop successfully. Unfortunately, the other desktop I really need to make wireless is having difficulties. The computer never shows the message that a new device is discovered/installed. The adapter shows up under hardware devices and functioning properly but this is not the case. I installed the driver from the included CD but when I use Windows to troubleshoot, it says that the driver and adapter aren't working. When trying to set up a new network, I get a grayed-out wireless icon in the system tray and can't proceed. I disabled the firewall and antivirus so I could start over, uninstalling the driver, restarting and installing again.
View 12 Replies View RelatedI purchased a Linksys EA3500 about two months ago, brought it home and set it up with my DSL provider and everything was great, until sometime last week, and since then my download speeds have just plummeted to basically nothing. I did some troubleshooting but I cannot seem to find what the issue is. I have checked all the cables etc, and I know that it is definitely something with the router itself..My current Speedtest.net speeds are as follows (I am paying for a 5mb connection) with the EA3500.Ping of 15ms Download speed of .67mbps, Upload speed of .60mbps.When I remove the router and hook straight to the DSL modem I get the following results.Pink of 12ms Download speed of 4.89mbps, Upload speed of .60mbps
- I have tried to reset the router both by holding the reset button and through the configuration application.
- I have enabled and disabled wireless to see if that was slowing things down
- I have plugged in my old WRT54G and I get the 12ms, 4.89mbps,.60mbps results on it (so I know its the EA3500)
- I tried putting the computer in the DMZ
- I have changed the ports that the computer is plugged into
- I have disabled and enabled IPV6 on both router and network card
- Firmware version - 1.1.38.134141
Intel wireless adapter card doesn't recognize wireless network - computer says card is ok
View 1 Replies View RelatedI am having a HP Laptop with Windows Vista 64 bit OS. Since today I am having problem with my wireless network adapter card. It is remaining disabled and not getting enabled. I uninstalled the driver as well as disable the card but it is not working. The problem is Quick launch button on HP laptop for wireless card is showing as enabled but my network center shows it as disabled.
View 1 Replies View Relatedcan you use a Mini USB WiFi Wireless Adapter LAN Network Card on a desktop computer
View 4 Replies View RelatedBrand new MSI system using windows 7. we're using a wirless network in the house, and up until today it's been fine. Randomly, Windows is no longer detecting any networks.
I've confirmed there is no prob with the router or signal as I can detect the network in my room and connect to the internet (using a homeplug hardline). I've tried enabling and disabling both the router and wireless card, a system restore (windows made no changes), and when I came to use the windows 7 troubleshooter - it says the device is not enabled?
the DNS error and was able to fix it but I have a new error. I currently use a Motorola SURFboard SB5101 USB Cable modem and am having an issue. I have tried repairing it and I receive a message "TCP/IP is not enabled for this enabled for this connection. Cannot proceed." I currently have 3 LAN or High-speed internet connections that are showing up. Two are the ones I have said earlier and the third is a Intel(R) PRO/100 VE Network Connection #2. All are connected and firewalled but I cannot use the internet.
View 1 Replies View RelatedI recently received the blue screen of death on my labtop so I used the system restore cd and wiped the entire hard drive clean. Afterwards I knew to extract the drivers from the drivers and utilities cd. I extraced the wlan card since this is what has been controlling my wireless at school and everywhere else. The little tower icon doesn't appear in my task box on the bottom of the screen nor is it anywhere where I can enable it. The only place I see the driver is in the add/remove folder in the control panel. Furthermore the blue light doesn't appear when I flip the switch to the on position.
View 3 Replies View RelatedWe purchase a new 3945 router and a NM-1A-T3/E3 card. We would like to use the T3 funcationality so we enabled the command card type t3 1 (slot1), reboot the device.After reboot the sh ip int brief command should show the serial interfaces e.g serial1/0.In this case it doesn't, it shows the Gigi interfaces and ATM1/0 no serial interfaces.I've also tried upgrading to the latest IOS from cisco.
View 2 Replies View Relatedhave purchased Belkin wifi usb adapter dualband N450 and downloaded the driver from included CD, my OS is windows7 starterfter I plug in the adapter, the power ON is litting and wait for a while if will flashing but not. I opened the "NETWORK AND SHARING CENTER" and click the "CHANGE ADAPTER SETTINGS", the Belkin wireless adapter is disabled and had tried enabling it but still it is disable. I uninstalled the driver and the program, I checked in the internet and downloaded the file F9L1101v1_N600.exe and installed. Checked again but still the same problem before, Disabled and tried enabling but to no success.
View 3 Replies View RelatedI have recently started (slowly) upgrading my computer. I have an older desktop, and I'm wanting to eliminate the ethernet cable so I can put my desktop anywhere in the house and not have to worry about running cables. I really can't afford the faster internet at this time and I'm having issues with streaming movies. So I really don't want to lose what speed my internet does have by switching to wireless. The USB adapter is less expensive by a few bucks, but I'm worries it might just stop working randomly, or be slow in comparison to a PCI card. Another issue is with my old motherboard, I only have 2 pci slots and one pci-e slot, I've ordered a new sound card, just installed a video card. So I only have one slot left, and I was wanting to put a TV tuner in that spot.
Should I get the USB (300mbps is what I'm looking at) or should I just get over wanting to put a tv tuner in and just get the card and install it? Just wanting some general advice on what more advanced users think of it. I've seen pci expansions online but that was just way out of my price range, and do not want to have to buy a new motherboard.
Just want to know how to synchronise two wireless interface cards so one will scan while the other will keep he connection with the remote host, the role will be interchanged by the two cards
View 1 Replies View RelatedI wan to buy an wireless adapter for my desk top pc. Which I should choose from PCI card or usb adapter?
View 2 Replies View RelatedI got a different tower to use ,and added my wireless card and external antenna to it , but need setting up the new PC tower to use the wireless card and antenna. How to set up the available connections so that I can use this in my garage too.
View 1 Replies View RelatedCan I make my old XPS 210 wireless internet with either a card or an adapter? If so, which ones.
View 1 Replies View RelatedMy parents own two old Dell Latitude D505 laptops, and they want to use them with their wireless internet. They have one Belkin Wireless G Notebook Network Card (#F5D7010), but when I put it in, it says I have to download the drivers for it, and can't find the drivers. I tried downloading the Belkin Driver, but it still says another driver is missing. My question: Would it be possible to download the driver on my mac, transfer it to the dell with a flash drive and install it? If so, how do I find the right one?
View 1 Replies View Relatedtoday my Belkin 7050 wifi adapter arrived.I went through the install procedure from the cd,and when asked to plug in the adapter,I got the message asking for a notebook card,which I haven't got.It then told me that the drivers aren't installed.The device isn't showing in device manager.I called Belkin support but all the could suggest was that the device was to try it in another computer.I am unable to do this because the communal computer needs administrator rights to install programs etc.
View 10 Replies View RelatedI have a Notebook HP Pavillion DV6 3113sa with Windows 7 64-bit My Broadcom Bluetooth and Wireless Combo Card is not being detected. On device manager> Network adapters I cannot see my the wireless adapter. Realtek PCIe GBE Family controller is in the device manager though. Also I can access internet with an ethernt cable and my phone and other computer can detect my wireless router. The wireless light is also continually orange and will not change. So neither bluetooth or wireless is working. I have down loaded the 2 Broadcom drivers from the HP website but neither fix the problem. However the bluetooth driver says something like 'Driver failed to install because no bluetooth device was found'.
View 3 Replies View RelatedI try to setup a network where both interfaces in my laptop are enabled. One is a wifi interface, the other is LAN. My WIFI is supposed to connect to a router that connects to a modem and the LAN interface is supposed to connect to my other PC.The problem with the configuration occurs when I try to access the internet, my laptop confuses not knowing where it should send the IP packets to the LAN or to the WIFI interface.What is the best solution for accessing the internet from my laptop (I don't care about accessing it from other PC) without change the topology? Should I configure the browser in my laptop so that it access internet through proxy?
View 2 Replies View RelatedMy Toshiba laptop running Vista as an operating connects just fine to the wireless network at my house. However, I will soon be house-sitting at a house that also has security-enabled wireless available. I connect just fine at my house, but whenever I put in the password at their house it says that that it cannot connect because of a timeout. I can't figure out what the problem is, because I recently went to the public library that has wifi and got on just fine. why in the world it will not connect to this specific wireless router??
View 7 Replies View Relatedam trying to connect my laptop withgalax tab via mobile AP configuration, it give me this error {dhcp is not enabled for wireless network connection}
View 1 Replies View Relatedive recently bought a tcl internet enabled tv. I have tried connecting it to the wireless network and it keeps giving me an error that the "connection failed due to timeout".
View 5 Replies View RelatedIs there a minimum distance spec for proximity of an AE1000 wireless adapter card to an E4200 wireless router?
View 1 Replies View RelatedI haven't installed anything new lately, nothing that would affect the wireless, but my wireless suddenly stopped working. My wireless has been working successfully for the past 2 years no problems till now. I have a Dell Latitude E6410 my computer is running Windows 7 32bit. When I open up the DW WLAN Card Utility it says "There are currently no wireless adapters available and enabled. Please enable any available wireless adapters before accessing this configuration utility. I tried reinstalling drivers for the wireless but my computer says "no compatible hardware found".
Also the under the wireless adapters section of Device Manager there isn't an adapter for wireless, but there is an unknown device.
Here's a View at my Device Manager [URL]
I've tried to use computer restart magic but no luck there.
Also, my computer is running on a university network. My roommate's wireless is working fine. Also I've already system restored to a point where I know it was working, no luck...
My wife and I Security Enabled our wireless network several months ago.We recently moved, and after transferring Internet service, we realized we'd lost our passkey.My wife's laptop has, after one failed attempt to connect to the network, refused to even show the network as an available connection.We currently have the router set to broadcast SSID.We have restored factory settings on the router and completely revamped the security setup.We've removed all other networks in the area as optional connections on her computer.We also replaced the ethernet cord to my desktop because the old one started erratically disconnecting.Nothing's worked.My wife's computer is a Dell laptop using Windows Vista.
View 6 Replies View RelatedEver since I bought the E4200 months ago I had no wireless network between my laptops. pc's devices. I discovered now that I do have network (everything cool) when I disable NAT. That is all nice, but I don't have internet then.
View 8 Replies View RelatedI have a laptop that is running windows 7 premium and a desk top that is running xp pro. The laptop is connected to the internet but the desktop is not. I have them set up in a ethernet network through an RJ-45, and both are connected, but I can't seem to share the laptop's internet connection with the desk top. I've enabled internet sharing with the wireless network, but my desktop still cannot connect.
View 1 Replies View RelatedI think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View Relatedi use cisco vpn client software to connect my laptop to my company's network when i at home. using dsl modem.
i wonder if it is technically possible to connect my local printer to dsl router and in such a way establish connection between my laptop and printer?
I have upgraded to the new RV042G to take advantage of the gigabit Ethernet speeds and to prepare for when our ISP upgrades our bandwidth. I currently use the RV042 with Protect Link enabled to filter out various categories from our network traffic. I noticed that this feature is not included with the RV042G.
Is this something Cisco will decide to add back in later? In the meantime, how to block content on the network? The basic URL and keyword filter will not meet our needs, since it is much easier to let a service such as Trend Micro manage what is blocked in the categories they offer.