Network Showing 100mbps?
Jun 21, 2011i have gigabit cards on 3 pc linked by a gigabit router but all machine showing connection speed of only 100mbps
View 6 Replies
ADVERTISEMENT
100mbps Connection Not Showing Results On Speedtest
Jan 11, 2012I have 100mbps connection but when i took the test at speedtest.net it was so slow i don't understand whats bottle necking my system. When i download games off of steam it downloads its much faster then downing anything from my browser. I know its my network because when i went on steam and changed my download settings to cable and it was fixed.
View 9 Replies View RelatedHome Network :: Get The Most Out Of New 100mbps Virgin Media?
May 11, 2012Virgin Media just upgraded my broadband to 100mbps. My main PC is in a place where unfortunately I cannot hard wire it to ethernet, and also the wifi signal is a bit rubbish - therefore I have been using D-Link Powerline AV Homeplugs DHP-307 200Mbps (N.B. I am fully aware that 200mbps doesn't really mean that through homeplugs, please read on)
Ages ago when my I first set this up my connection speed from Virgin Media was 50mbps and, after installing, I tested it a few times and got about 45mbps, which I was happy with.
However, due to the upgrade I thought I would test it again, and now I'm only gettin about 20-25Mbps. I did some diagnistic checks as follows:
A laptop plugged directly into my router via ethernet got 97 Mbps My laptop sitting next to my PC connected via wifi got 54 Mbps My PC connected via wifi with the ethernet/homeplug disconnected got 26 Mbps (I think my wireless card in the PC and the aeriel are both a bit rubbish though anyway)My PC connected via ethernet homeplug with no wifi got 23 Mbps
What I don't understand is:
1 - In the configuration utility for the homeplugs it says that the link speed for this plug is 96 Mbps, so how come that's not coming through?
2 - Why would it have one time been higher and now not? If it wasn't for point 1 above I might put it down to interference in the elecrical circuits, but I thought that's what the link speed would be showing me
I guess the best option would be to try and get VM to install a proper ethernet port in my study, however I can't imagine how they would do this without running cables through the house, which I don't want, so I'm trying to exhaust other options. I'm happy to ditch the homeplugs if there is something better.
Vista Showing Normal Wireless SSID Plus Showing Second Unidentified Network
Feb 5, 2011my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
View 13 Replies View RelatedOnly Getting 30Mbps From 100Mbps Line?
Dec 26, 2012So i have the virgin 100Mbps package but am only getting about 30 Mbps of this on my computer. I know that we are getting the full speed, as that i have downstairs (directly connected to router) is able to get 100Mbps.The computer that is only getting 30 Mbps is connected to the router (Virgin superhup) through the use of powerline adapters to give me a wired conenction from my room down to the router as we are unable to find a cable long enough to procide a direct connection (without drilling holes through our house and having it hang places)[CODE]
View 6 Replies View RelatedUse 1gbit Converter With A 100Mbps Connection?
Apr 20, 2011Can I use a 1gbit fibre to Ethernet converter with two Cisco 2950 , both 10/100?
View 4 Replies View RelatedNetwork Not Showing Up?
Aug 2, 2011I can connect to internet only while wired. my wireless is no longer working. I have a network set up, named with my last name but it does not appear as a network i can connect to in the system tray. Instead there is the name of a network i did not establish (neighbors network??)I cannot connect to that without a security key whihc makes sense. I went into Manage Wireless Networks and mine islisted and marked as connect automatically.
View 1 Replies View RelatedIncreasing LAN Speed Form 10Mbps To 100Mbps?
Aug 15, 2011My LAN speed was 100 Mbps but now it is 10 Mbps and too slow when I am using internet. So how can i increase the speed to 100 Mbps from 10Mbps?
View 2 Replies View RelatedConnect 10 / 100mbps Media Converter To OC3 Connection?
Feb 9, 2011Can you connect a 10/100mbps media converter to an oc-3 connection?
View 1 Replies View RelatedIncrease Internet Speed Connection To 100mbps?
Aug 9, 2011how to my increase Internet speed connection 100mbps
View 1 Replies View RelatedHow To Get 100mbps Speed In Wireless Data Card
Apr 27, 2012How to get 100mbps speed in wireless data card
View 1 Replies View RelatedD-Link DIR-615 :: Configuration For Pulling Up 100mbps Speed?
Feb 23, 2012I have Broadband 100 from Shaw Cablesystems (100mbps speed).I can only pull 30mbps with the DIR-615. I have tried exchanging it for another one, same issue.Is there some kind of configuration option I'm missing?
View 14 Replies View RelatedCisco WAN :: Is GBIC SFP-10G-LR Compatible With 100Mbps Speeds
Mar 21, 2011Imagine I have from customer side SFP-10G-LR GBIC.Then circuit to be deployed is 1310nm, Metro. My question is, if I will receive 100Mbps from such circuit, is this 10 GBIC compatible with 100Mbps? 10GBASE-LR SFP+ transceiver module for SMF, 1310-nm wavelength, LC duplex connector )
View 3 Replies View RelatedCisco WAN :: 2921 ISR For Routing 100Mbps ISP Internet
Feb 16, 2012It seems that Cisco mentioned, in their data sheet of 2921 ISR, that it can support up to 50Mbps. However, from Google search, it says 2921 can handle 100Mbps with no problem.I am planning on getting 2921 ISR in small office where only ~10 people are connected to it. And we do have two different line of 100Mbps ISP internet line and wish to share them in the office.I am confused why ~$2k router can not support 100Mbps where ~$100 consumer routhers like Linksys has no problem with handling that speed. The reason why I am planning on 2921 is the rich feature like Voip solution (CME) it offeres. I have several remote offices that needs to be connected with Voip phones. and I could go with UC500 series but it seems to me UC500 does not support IP Phone 9900 series.
View 5 Replies View RelatedNo LAN Showing In Network Connections?
Aug 19, 2012I have a desktop PC where the only internet connection is via a 'USB mobilebroadband dongle'.I have connected the PC via ethernet cable to the ethernet port on a d-link wifi router (which isn't connected to the internet).I'd like to be able to connect other non-PC devices (eg my mobile phone) to the router via wifi in order to connect to the internet.To do this, I gather that one possible solution is to bridge the LAN (not connected to internet) and dongle (connected to internet) connections.My first problem is that in 'Network Connections', only my USBdongle connection is shown (see pic) - there is no icon for the LAN/ethernet. In device manager, the "Atheros AR5007EG Wireless NetworkAdapter" and "Realtek PCIe FE Family Controller" are both showing without any ?
Other info:I'm running Windows 7 Home Premium 64 on a HP Pavilion All-in-one MS200 desktop.
Wifi Network Not Showing Up?
Mar 4, 2012Couple of weeks ago, I bought a net gear n600 dual band router. It's worked perfectly until last night. The network won't show up on any wireless devices in the house. I have restarted and reset it and my modem which is a westell. Sometimes the computer plugged in to the Internet with the Ethernet cord can connect and sometimes it cannot. What is the next step to figuring this out
View 1 Replies View RelatedNetwork Is Showing Up As Encrypted?
Sep 23, 2011I reloaded XP on an old laptop I have, a Toshiba Satellite, and it works fine. Problem is when I try to connect to my wireless network, it comes up as being security protected...and it isn't...and never has been. I have other computers connecting just fine, but I can't seem to figure this one out. I don't have a key to enter as there isn't one! I installed a USB wireless adapter, and it works fine, but I don't want to use the adapter on the laptop.
View 6 Replies View RelatedAsus RT-n16 Router - Gigabit Connection Turned Into 100Mbps
Feb 8, 2013I have a PC with a Realtek onboard Ethernet controller, running Windows XP. It's connected to an Asus RT-n16 router loaded with TomatoUSB, via a Cat5e cable. When I set it up a month or two ago, I confirmed that I was getting a Gigabit connection to it--the little network connection icon in the Windows XP taskbar indicated "1.0 Gbps." All well and good. I just happened to check it today, and it now says "100Mbps." Nothing, as far as I know, has changed to the configuration. I went into the Device Manager, and saw that under the driver settings, in "Speed", it was set to "Auto-Negotiate." When I tried setting that to "1.0 Gbps" instead, the network connection icon in XP's taskbar once again indicated "1.0Gbps." As an experiment, I then changed it back to Auto-Negotiate, and once again the taskbar icon read "100Mbps."So I guess I have two questions. 1) Should I leave the driver setting on 1Gbps rather than Auto-Negotiate? (2) Why might the speed have switched from 1Gbps to 100Mbps over the past month if nothing's changed?
View 7 Replies View RelatedRCA DCM315 Modem / 100MBps Charter Cable Install?
Jan 4, 2012I have charter cable coming tomorrow to install cable television and internet. I am using my own modem and router instead of renting one because they dont have any available to meet the install date?Should I just rent one from them and wait or should I just buy a different cable modem. I will be getting the Ultra cable package from charter that has speeds up to 100Mbps download and 5Mbps upload. I would say it is going to run around 60. I have a RCA DCM315 modem and a Linksys WRT54G v6 router with DD-WRT firmware. max up and down speed for the RCA DCM315 modem.
View 1 Replies View RelatedCabling / Cards :: 2 1gbps Lan Adapter Just Connect At 100mbps?
Apr 22, 2011i've connected a laptop with "Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC" to a onboard NIC of Asus M4A89TD Pro wich is "Realtek 8111E Gigabit LAN Controller", which both support 1gbps but they will auto-negotiate at 100mbps.
View 5 Replies View RelatedCisco Wireless :: 4400 - 5500 - Bridge With More Than 100Mbps
Aug 12, 2012We are using Cisco Wireless solution in our network. Using 4400/5500 WLCs and 3500/1130 series APs.
A new requirement has come up and we need to provide connectivity between two buildings (which are within 1 km) using wireless. This link should be able to give >=100Mbps.
As we already have 3500/1130 APs, can a wireless bridge be established using them which can also give >=100Mbps? Can this be done using a WLC based solution? What I mean is: Do I need to have a standalone AP solution or can it be done while both the APs register to WLC? What are the AP models/antennas that can meet my requirement?
Cisco Switching/Routing :: 100Mbps Metro-E With 1841
Jan 18, 2012I have a cisco 1841 running on a 10Mbps Metro-E connection. I recently signed an agreement for a 100Mbps Metro-E. I am wondering if I will need to purchase a new router to support this new connection or will my 1841 be able to handle the traffic.
View 5 Replies View RelatedNetwork Is Not Showing Up On Only Two Windows 7 Computers?
Dec 6, 2012My Macbook Pro connects and mom's Windows 7 laptop connects, and (though having done it manually) and my iPhone connects as well. But my Windows 7 desktop and my dad's Windows 7 laptop don't detect the network.
View 3 Replies View RelatedNetwork Showing Different Number Of Computers
Mar 4, 2012At my work when I click on Network it immediately shows a full list of all the computers on the network. There's probably about 100. At home when I click network it takes like 30 seconds to do some scan and show like 3 computers. What's the deal?
View 3 Replies View RelatedRouter Is On But Wireless Network Is Not Showing Up?
Oct 21, 2011Some background first. Last night I went trolling around for a solution to an ip address conflict message I receive when I try to go onto Xbox live via a network bridge on my laptop. What I eventually ended up doing was going into my tp-link wireless router settings (not sure of the exact model number as I am not home right now) and reserving two different ip addresses for my laptop and my Xbox using their MAC addresses. It didn't appear to do anything ( now I think possibly because my Xbox needs the same ip as my laptop?). Anyways I tried to go onto Xbox live and it worked at the start (as it always does) and then 30 minutes in, the ip address conflict message came up (usually meaning a disconnect from Xbox live is imminent). But I actually ended up staying online for another 3 hours until the Internet crashed.
Upon further investigation I noticed that my wireless network was not even showing up on my computer, my phone, or any of my roommates computers. I went upstairs to check the wireless router and it was seemingly working correctly (i.e. no flashing lights or anything). Not quite sure what to do. I would go back and change the router settings but I don't think I can without a connection to it.
HP G62 - Network Adapter Not Showing As Enabled
Jul 21, 2012I have a HP G62 laptop with windows 7 and a Atheros AR9285 wifi adapter. The Wireless Assistant shows the WLAN as disabled. In the device manager, the adapter is listed as enabled. When I push the F12 key that turns on and off the wireless, the wireless assistant alternates between showing the WLAN as Off or Disabled. I tried disabling the adapter and re-enabling it from the device manager, but the wireless assistant still shows it as disabled.
View 3 Replies View RelatedNetwork Shares Not Showing In Client?
May 18, 2012I recently did a clean install of Win 7 64-bit Pro on my workstation. This was previously connected to my DNS (Windows server 2008 R2) which i use to host my files, music etc for my home network. I was previously able to see my network shares in windows explorer (client side) but now I don't. If i go to search box and \server the shared folders will then be displayed in windows explorer under network and i have access to them. I've done a small amount of digging but have so far found nothing to point me in the right direction. So while i have access i would like to be able to point windows media player to my shared music on the server, which i can't do now because I have no way to navigate to that folder. Same with other programs such as outlook, when i want to attach a file to an email i'm not able to navigate to the share. Weird as i have access to the share by search \server?
View 3 Replies View RelatedXP Computer Showing Up Twice In Windows 7 Network Map?
Aug 15, 2012Have an older laptop running XP Home, Desktop running XP Pro with printer on it. Wireless network setup and doing fine for bidirectional file share and print share from old lappie to desktop. All worked great.Bought a brand new high end laptop with Win 7 (not impressed). Finally got the Win 7 new one to recognize both older computers on the Win 7 computer and was able to access file share and print on the desktop. Thought I was doneNope, now while I can see the old lappie and it can see it in the Win7 computer both directions give me cannot access the drive or specific files even though it "sees" themAll files and disks are set to full share. No password is required or any homegroup is setup on the win 7 system. I've been in the bus. a long time so you know I'm at the end of the rope. All searches through knowledge base and the web have yielded no results to this.I did find an absolute to this in insuring that both systems have the same workgroup. Changed the old lappie to the right name. Made no difference in access (after several reboots). Obviously can't run Easy Transfer with this situation.
Now problem #2. I changed the old lappies workgroup to the same as the Win7 computer in the hopes of fixing this. Made no difference but now I have two iterations my XP laptop in the Win 7 system.When selected, the info for one has the old workgroup and selecting the other shows the new workgroup (matching the Win7 workgroup).Anyway, throwing up my hands in frustration and disgust. Find no way to even dump the old workgroup map listing. Jeez. Sure glad they (M/S) made this better?
Computers Not Showing In My Network Places?
Nov 22, 2012Workgroup computers are not shown in my network place....
View 1 Replies View RelatedLinksys Wireless Router :: E4200 Speed 300mbps Goes To 100mbps
Jun 25, 2012I think i make big mistake to update E4200 firmware from 1.0.00 to 1.0.04.My ISP speed is 300 then i connect pc.Download Speed: 299.22 mbps (37.4 MB/sec transfer rate)Upload Speed: 267.63 mbps (33.5 MB/sec transfer rate)Then connect E4200 With 1.0.00 firmware speed is ~200.But now firmware is 1.0.04 and speed only 100Download Speed: 103.43 mbps (12.9 MB/sec transfer rate)Upload Speed: 101.88 mbps (12.7 MB/sec transfer rate.
View 9 Replies View RelatedCisco WAN :: 2821 - Router Suggestion For Multihoming 100Mbps Internet BGP
Aug 12, 2012I am looking for a simple router recomendation for multihoming dual 100Mbps internet connections with BGP routing. What are the current best practices regarding required resources for the full Internet BGP routing table? We were thinking of specing a 3945 for this application, but is that overkill? The customer has a 2821 that is not in use, I'm thinking this would be too slow for Internet BGP routing combined with the 100Mbps line speed.
View 4 Replies View RelatedCisco Wireless :: How To Enable 100mbps Speed On WLC 2504 With 3600 AP
Sep 13, 2012i have cisco wlc 2504 connected with cisco 3600 ap,now the customer required n bandwidth speed ,but in wlc am not able to enable n bandwidth for ssid.in radio policy of ssid also n bandwidth is not showing,only this bandwidth showing a/g,g,b/g, and all?
View 8 Replies View RelatedRouters / Switches :: Another Network Is Showing And Not Mine?
Feb 12, 2012A friend was over with his lap top, since then I'm getting "sam's pc network",instead of my network, I can't seem to disable it, nor can the other devices in the house connect to it, the default is Sam's....
View 1 Replies View Related