At my work when I click on Network it immediately shows a full list of all the computers on the network. There's probably about 100. At home when I click network it takes like 30 seconds to do some scan and show like 3 computers. What's the deal?
View 3 RepliesMy Macbook Pro connects and mom's Windows 7 laptop connects, and (though having done it manually) and my iPhone connects as well. But my Windows 7 desktop and my dad's Windows 7 laptop don't detect the network.
View 3 Replies View RelatedWorkgroup computers are not shown in my network place....
View 1 Replies View RelatedI noticed a TON of random devices showing up in my Network within Windows 7. When I say a ton, I mean 739! I am not computer illiterate, but definitely not a pro. My router is WEP password protected, so I'm not sure on earth is going on here. I thought maybe I had a torrent program open that could be affecting this somehow, but I don't..
View 6 Replies View RelatedCisco 2504 wlc, 1142n ap, windows radius server.
When I click on Network, the only computer that shows up is mine. If I am hardwired then everything shows up (Servers, other workstations). Is this a problem with the radius server or something on the controller?
I have a cisco 5520 running as IPsec concentrator. On the ASDM homepage is shows like 31 VPN connected. But if I go to Monitor > VPN is show only 18. Then if I use SSH using sh crypto command it shows the same number as on the Monitor > VPN sections. I am running 8.3(1) and ASDM 6.3(1).
View 8 Replies View RelatedI have configured the following access-list on routers fa0 interface (i am using 1801)
access-list 111 permit ip any any log
and applied it in "in" direction on Fa0 interface.
Now when i am sending ssh packets to this interface its showing below
*May 14 05:09:00.104: %SEC-6-IPACCESSLOGP: list 111 permitted tcp 172.18.128.2(0) -> 172.18.128.146(0), 1 packet
why its not showing any port number ?
Showing Your firewall has a version number null which is not supported by ASDM 6.2(5). I received this error when trying to run asdm on my asa 5505. I upgraded image and asdm trying different versions. I used many different versions of java all to no avail.
View 4 Replies View RelatedHave another problem with my new rev B router.
I am trying to configure access control rules, but the list of computers (ip addresses and mac addresses) are empty, I have setup all of my devices with static ip's, they are all turned on and all have internet access. None of the systems including the one I am trying to configure the rules with are there, They don't show up in port forwarding either. Any one ever have this problem? I returned and DIR-825 Rev.b for this same problem because i thought it was defective.
I have tried rebooting the router, rebooting each pc and trying different ports on the router itself. There are wireless and wired computers that I am trying to setup but none of them show up. When I try to manually enter them into access control ie. 192.168.0.103 it will only allow me to put one computer in for each rule.
The old rev.A router this one replaced work perfectly fine with the same cables and computers setup the same way.
my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
View 13 Replies View RelatedI have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
what is a network ID number and how do i find it?
View 4 Replies View Relatedhow to find out the number of routers in the network
View 1 Replies View Relatedi'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
View 6 Replies View RelatedHow to find out mobile number network
View 1 Replies View RelatedI'm planning to build a network in a office and I've decided to do that with powerline AV network adapters.I
1. what is the real limit of numbers of powerline AV adapters in one network?
2. what if my neighbours are planning to build their own network and total number of adapters in building exceeds the maximum possible number. How to filter powerline networks from each other?
I can connect to internet only while wired. my wireless is no longer working. I have a network set up, named with my last name but it does not appear as a network i can connect to in the system tray. Instead there is the name of a network i did not establish (neighbors network??)I cannot connect to that without a security key whihc makes sense. I went into Manage Wireless Networks and mine islisted and marked as connect automatically.
View 1 Replies View RelatedAs the title states, I am want to set up a single ADSL connection, using 1 router across 6 apartments. The apartments are 2 floors and from the top they look like this The Router is on Apartment 1. Between apartment 1 and 2, 3 and 4, and 5 and 6 is a normal cement wall. Between 3 and 4 is Cement and stone, so are the outside walls of each house. I was thinking of doing it simple and using 3-4 range extenders such as the Linksys RE1000. From what i searched on the internet, and what the documentation states, the signal will get bottle-necked for the last house due to the RE1000 giving half of the bandwidth. Quote from Linksys FAQ: Quote: 7. Can I add more than one RE1000 to my existing wireless network? Yes. But since the RE1000 only gets half of the wireless signal from your main router or access point, adding multiple range extenders can provide you with even lower signal, thus, giving lesser bandwidth to your wireless computers or devices that you are going to connect to these additional extenders.So, what would be an optimal solution to this? Should I go ahead and install the RE1000's? Is there something better that i can do?
View 5 Replies View RelatedJust upgraded my system. I am using D-Link 615 as access point hardwired LAN to LAN to ActiveTec MI424WR N capable Verizon Fios Wireless Modem/Router. The Fios Router is set up with WPA2 security. Intend on having three 615s as Access Points off of ActiveTec. Have a number of wireless devices accessing the network. Have followed instructions from manual to use 615 as Access Point, disabling UPnP and the DNCP Server function on the 615. My ActiveTec IP address is 192.168.1.1 and I changed the 615 to 192.168.1.50. I can type this IP address in my browser and get to the 615 set-up.
I have tried a couple different options in naming the SSID on the 615 set-up. If I name the SSID on the 615 the same as the ActiveTec router, when I go to Connect to a wireless signal where there is overlap, there are two signals that one can connect to, named the same SSID, the Fios is WPA2 secured and the 615 is not. Shouldn't these all be on one SSID? It seems that I have two different networks (different SSIDs) instead of one (rather than the 615 simply serving as an extension of the Fios router as a wired remote access point) with different security protocols (WPA2 and None). The SSID name almost seems meaningless. If I name the 615 SSID the same as the Fios router SSID or something different, I still have the option of selecting one SSID that is secure and one that isn't. If I try to connect to the SSID name associated with the 615 I can get on without providing a password.How do I make it so that one can walk around and go from one area to the next and seamlessly move to the best signal? I did read to select different sets of channels for each access point.
i have gigabit cards on 3 pc linked by a gigabit router but all machine showing connection speed of only 100mbps
View 6 Replies View RelatedI have a desktop PC where the only internet connection is via a 'USB mobilebroadband dongle'.I have connected the PC via ethernet cable to the ethernet port on a d-link wifi router (which isn't connected to the internet).I'd like to be able to connect other non-PC devices (eg my mobile phone) to the router via wifi in order to connect to the internet.To do this, I gather that one possible solution is to bridge the LAN (not connected to internet) and dongle (connected to internet) connections.My first problem is that in 'Network Connections', only my USBdongle connection is shown (see pic) - there is no icon for the LAN/ethernet. In device manager, the "Atheros AR5007EG Wireless NetworkAdapter" and "Realtek PCIe FE Family Controller" are both showing without any ?
Other info:I'm running Windows 7 Home Premium 64 on a HP Pavilion All-in-one MS200 desktop.
Couple of weeks ago, I bought a net gear n600 dual band router. It's worked perfectly until last night. The network won't show up on any wireless devices in the house. I have restarted and reset it and my modem which is a westell. Sometimes the computer plugged in to the Internet with the Ethernet cord can connect and sometimes it cannot. What is the next step to figuring this out
View 1 Replies View RelatedI reloaded XP on an old laptop I have, a Toshiba Satellite, and it works fine. Problem is when I try to connect to my wireless network, it comes up as being security protected...and it isn't...and never has been. I have other computers connecting just fine, but I can't seem to figure this one out. I don't have a key to enter as there isn't one! I installed a USB wireless adapter, and it works fine, but I don't want to use the adapter on the laptop.
View 6 Replies View RelatedSome background first. Last night I went trolling around for a solution to an ip address conflict message I receive when I try to go onto Xbox live via a network bridge on my laptop. What I eventually ended up doing was going into my tp-link wireless router settings (not sure of the exact model number as I am not home right now) and reserving two different ip addresses for my laptop and my Xbox using their MAC addresses. It didn't appear to do anything ( now I think possibly because my Xbox needs the same ip as my laptop?). Anyways I tried to go onto Xbox live and it worked at the start (as it always does) and then 30 minutes in, the ip address conflict message came up (usually meaning a disconnect from Xbox live is imminent). But I actually ended up staying online for another 3 hours until the Internet crashed.
Upon further investigation I noticed that my wireless network was not even showing up on my computer, my phone, or any of my roommates computers. I went upstairs to check the wireless router and it was seemingly working correctly (i.e. no flashing lights or anything). Not quite sure what to do. I would go back and change the router settings but I don't think I can without a connection to it.
I have a HP G62 laptop with windows 7 and a Atheros AR9285 wifi adapter. The Wireless Assistant shows the WLAN as disabled. In the device manager, the adapter is listed as enabled. When I push the F12 key that turns on and off the wireless, the wireless assistant alternates between showing the WLAN as Off or Disabled. I tried disabling the adapter and re-enabling it from the device manager, but the wireless assistant still shows it as disabled.
View 3 Replies View RelatedI recently did a clean install of Win 7 64-bit Pro on my workstation. This was previously connected to my DNS (Windows server 2008 R2) which i use to host my files, music etc for my home network. I was previously able to see my network shares in windows explorer (client side) but now I don't. If i go to search box and \server the shared folders will then be displayed in windows explorer under network and i have access to them. I've done a small amount of digging but have so far found nothing to point me in the right direction. So while i have access i would like to be able to point windows media player to my shared music on the server, which i can't do now because I have no way to navigate to that folder. Same with other programs such as outlook, when i want to attach a file to an email i'm not able to navigate to the share. Weird as i have access to the share by search \server?
View 3 Replies View RelatedHave an older laptop running XP Home, Desktop running XP Pro with printer on it. Wireless network setup and doing fine for bidirectional file share and print share from old lappie to desktop. All worked great.Bought a brand new high end laptop with Win 7 (not impressed). Finally got the Win 7 new one to recognize both older computers on the Win 7 computer and was able to access file share and print on the desktop. Thought I was doneNope, now while I can see the old lappie and it can see it in the Win7 computer both directions give me cannot access the drive or specific files even though it "sees" themAll files and disks are set to full share. No password is required or any homegroup is setup on the win 7 system. I've been in the bus. a long time so you know I'm at the end of the rope. All searches through knowledge base and the web have yielded no results to this.I did find an absolute to this in insuring that both systems have the same workgroup. Changed the old lappie to the right name. Made no difference in access (after several reboots). Obviously can't run Easy Transfer with this situation.
Now problem #2. I changed the old lappies workgroup to the same as the Win7 computer in the hopes of fixing this. Made no difference but now I have two iterations my XP laptop in the Win 7 system.When selected, the info for one has the old workgroup and selecting the other shows the new workgroup (matching the Win7 workgroup).Anyway, throwing up my hands in frustration and disgust. Find no way to even dump the old workgroup map listing. Jeez. Sure glad they (M/S) made this better?
I have an XP machine that is unable to see any other computer on the network. I disabled the firewall and I can ping any device on the network with no issue. I have set several other computers to the same workgroup which is mshome. Lastly I have read several other post and tried the ideas there including this one...Finally, let's do the stack repair.TCP/IP stack repair options for use with Windows XP with SP2.
Start, ]R[/B]un, CMD to open a command prompt:
In the command prompt window that opens, type type the following commands:
Note: Type only the text in bold for the following commands.
Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log
Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog
Reboot the machine.That did not seem to work. As I am still in the same situation.
another note. This is the only XP on the network. Everyone else is Windows 7. Also on a side note, the reason I am doing this is to install a printer on this one and allow the other computers to print from it and seeing folders is good also.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Upstairs
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown[code].....
I have a wireless router which works just fine. I can connect my laptop as well as my iPad to it. I also have a hard wire connection that goes to my computer which works just fine. how can I get my computer to see the other computers in the network? They just don't show up even though I have shared enabled. There is only one router, so I thought it might be automatic, but it doesn't seem to be.
View 2 Replies View RelatedI have two identical computers on the same home network (and a couple of others too). My problem is the even though they are connected to the same wireless router and can each see the internet and the printer that online they cannot see each other. When I ping one from the other I get no response though they both receive responses from the router. I can't transfer files etc. It works a while ago but can't seem to get them connected again.
View 9 Replies View RelatedA friend was over with his lap top, since then I'm getting "sam's pc network",instead of my network, I can't seem to disable it, nor can the other devices in the house connect to it, the default is Sam's....
View 1 Replies View Relatedi formatted my pc but after that lan is not showing in network connections
View 1 Replies View RelatedMy attempts to connect me and my girlfriend's laptops together for some LAN gaming with an ethernet cable has had some odd problems, with my LAN connection showing up as an Unidentified, Public Network which I cannot edit in any way whatsoever. I'm at a loss. I've tried setting a static IP and it didn't appear to work at all.The network bridge is to use my laptop as a wireless adaptor for my Xbox.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersCorey>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Corey-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....