How To Find Network Id Number

The address of my server, as a url, not the IP Address. I already have that, and how to find the number of connections allowed by my provider, which is clearwire.

View 8 Replies View Related

Cisco Wireless :: WAP4410N / Cannot Log Into The WAP To Find The PIN Number

Jan 18, 2011

I am trying to set up a Linksys WAP4410N on our network. We are trying to run it using unrestricted access, but it is requiring a pin number. The prompt I get when trying to connect to the WAP is that the number should be in the original documentation. I can not find the original documentation and I cannot log into the WAP to find the PIN number.

View 1 Replies View Related

Cisco Wireless :: WCS 4.2 - How To Find Serial Number

Feb 8, 2009

We are running WCS 4.2 on linux. I need to find the serial number of the software so I can raise a TAC case. how to find the serial number? I cant see it via the GUI.

View 10 Replies View Related

Routers / Switches :: Find Wifi Number To Add Tablet?

Feb 9, 2012

How can I find my WiFi # to add tablet? I have it on my laptop, Ipod Touch, and don't want to reset # to add the tablet

View 1 Replies View Related

Find The Serial Number Of Lexmark Pro 900 Series Printer?

Dec 13, 2011

i need the address of my pro 900 series printer to install the program for my Sony note pad

View 2 Replies View Related

Can't Find Router Number On Aspire 5750-6493

Jan 14, 2012

Can't find router number on my aspire 5750-6493

View 1 Replies View Related

Linksys Wireless Router :: Wrtter54g2 - Can't Find Pin Number

Oct 25, 2008

my new laptop is asking for pin number: i have a wrtter54g2 v1 router.... can't find pin number

View 9 Replies View Related

Cisco WAN :: How To Find Adsl Line Number From 886VA

Mar 28, 2012

Is there a way to find in a remote branch the adsl line number in a cisco router 886VA.

When giving show controllers vdsl 0

we can see the upload/download speed but there is no information about the line number. We need this information in order to troubleshoot adsl line problems with our ISP's in remote branch offices.

View 3 Replies View Related

Cisco WAN :: Can't Find Maximum Number Of Vrf Supported On 3925E

Aug 1, 2012

I cant find the maximum number of vrf supported on a 3925E ?

View 1 Replies View Related

Cisco Firewall :: Find PIX 515e Serial Number?

Sep 27, 2011

How can I find the serial number at Cisco PIX-515E ?

View 2 Replies View Related

Linksys Wireless Router :: WRT54GS - Cannot Find Version Number

Jul 9, 2007

I am trying to find out what version my router is, all it has on the model number is "WRT54GS" no version number attached to it.

View 8 Replies View Related

Linksys Wireless Router :: E4200 V2 - Find Hardware Version Number?

Nov 28, 2012

In January 2012 I bought a Linksys E4200v2. I am trying to download a firmware version upgrade and it wants to know what hardware version I have. The top of my router (where the model number is displayed), only has E4200. I have looked through my receipts, the box it came in, and anything else I can find to do with the router - they all have the E4200v2. In case the 'v2' portion is for the hardware version, I do not want to download the wrong firmware version and end up with a router that doesn't work

View 4 Replies View Related

Cisco Switching/Routing :: Cannot Find Port Number From MAC Address Using SNMP With 3725

Dec 2, 2012

I'm developing a project where I use the SNMP protocol to discover the network. By discovering the network I mean go through all the routers and switches and retrieve the IP routing table from routers and the forwarding table from switches. With the routers I have no problem. For the switches I need to know for each port the MAC addresses and the Vlans. Basically it's use SNMP to find a port number from a MAC address. To do that i followed this tutorial: [URL]

The problem is that I'm using a Cisco 3725 Router with IOS 12.4 (21) and a NM-16ESW module to work as a Switch and when I use the OID .1.3.6.1.2.1.17 corresponding to the BRIDGE-MIB as it follows:

snmpwalk -v2c -c myrouter 10.1.1.5 .1.3.6.1.2.1.17

it returns:
SNMPv2-SMI::mib-2.17.1.1.0 = Hex-STRING: 00 00 00 00 00 00
SNMPv2-SMI::mib-2.17.1.2.0 = INTEGER: 0
SNMPv2-SMI::mib-2.17.1.3.0 = INTEGER: 4

From this I guess there's no information on the router about Vlans or anything. Other thing is that when I use community string indexing it returns a timeout. My theory is that this version doesn't support indexing but I don't know.

how can I get the Port Number from a MAC address from this "switch" (it's a router working as a switch) using SNMP?

View 2 Replies View Related

Cisco :: Translate Called Number Based On Calling Number?

Mar 26, 2011

I have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.

So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.

View 13 Replies View Related

How To Know The Number Of Routers In The Network

Feb 13, 2013

how to find out the number of routers in the network

View 1 Replies View Related

Network Showing Different Number Of Computers

Mar 4, 2012

At my work when I click on Network it immediately shows a full list of all the computers on the network. There's probably about 100. At home when I click network it takes like 30 seconds to do some scan and show like 3 computers. What's the deal?

View 3 Replies View Related

Maximum Number Of Powerline AV Adapters In One Network

Feb 4, 2011

I'm planning to build a network in a office and I've decided to do that with powerline AV network adapters.I

1. what is the real limit of numbers of powerline AV adapters in one network?

2. what if my neighbours are planning to build their own network and total number of adapters in building exceeds the maximum possible number. How to filter powerline networks from each other?

View 5 Replies View Related

Setting Up A Single Wireless Network Across A Number Of Houses?

Jul 27, 2012

As the title states, I am want to set up a single ADSL connection, using 1 router across 6 apartments. The apartments are 2 floors and from the top they look like this The Router is on Apartment 1. Between apartment 1 and 2, 3 and 4, and 5 and 6 is a normal cement wall. Between 3 and 4 is Cement and stone, so are the outside walls of each house. I was thinking of doing it simple and using 3-4 range extenders such as the Linksys RE1000. From what i searched on the internet, and what the documentation states, the signal will get bottle-necked for the last house due to the RE1000 giving half of the bandwidth. Quote from Linksys FAQ: Quote: 7. Can I add more than one RE1000 to my existing wireless network? Yes. But since the RE1000 only gets half of the wireless signal from your main router or access point, adding multiple range extenders can provide you with even lower signal, thus, giving lesser bandwidth to your wireless computers or devices that you are going to connect to these additional extenders.So, what would be an optimal solution to this? Should I go ahead and install the RE1000's? Is there something better that i can do?

View 5 Replies View Related

D-Link DIR-615 :: Number Of Wireless Devices Accessing Network

Jul 15, 2012

Just upgraded my system. I am using D-Link 615 as access point hardwired LAN to LAN to ActiveTec MI424WR N capable Verizon Fios Wireless Modem/Router. The Fios Router is set up with WPA2 security. Intend on having three 615s as Access Points off of ActiveTec. Have a number of wireless devices accessing the network. Have followed instructions from manual to use 615 as Access Point, disabling UPnP and the DNCP Server function on the 615. My ActiveTec IP address is 192.168.1.1 and I changed the 615 to 192.168.1.50. I can type this IP address in my browser and get to the 615 set-up.

I have tried a couple different options in naming the SSID on the 615 set-up. If I name the SSID on the 615 the same as the ActiveTec router, when I go to Connect to a wireless signal where there is overlap, there are two signals that one can connect to, named the same SSID, the Fios is WPA2 secured and the 615 is not. Shouldn't these all be on one SSID? It seems that I have two different networks (different SSIDs) instead of one (rather than the 615 simply serving as an extension of the Fios router as a wired remote access point) with different security protocols (WPA2 and None). The SSID name almost seems meaningless. If I name the 615 SSID the same as the Fios router SSID or something different, I still have the option of selecting one SSID that is secure and one that isn't. If I try to connect to the SSID name associated with the 615 I can get on without providing a password.How do I make it so that one can walk around and go from one area to the next and seamlessly move to the best signal? I did read to select different sets of channels for each access point.

View 3 Replies View Related

Cabling / Cards :: Can't Find Network Adapters On Network Connections

Aug 13, 2012

i am having a problem with my desktop right now, just recently i re-installed Windows7, a clean format... but then i suddenly noticed that i cant connect to the internet, no network adapters are detected on the Network Connections, its empty i looked at the Device Manager and saw a yellow warning on realtek rtl8139/810x family fast ethernet nic, i download the driver using my laptop (wireless connection)... and installed that driver on my desktop pc then checked the device manager once again, but it still has a yellow warning.i dont know what to do anymore, and at the last screenshot theres this error message: This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system.i have two lan cards, one at the motherboard(not in use) and the other PCI-E lan card (tp-link ) ...im just wondering if that Realtek i just installed is the lan driver for the motherboard?

View 2 Replies View Related

Find The Network Security Key / Wireless Network

Nov 19, 2011

how to find the network security key,wireless network

View 1 Replies View Related

Can't Find NAS On Network

Jan 8, 2013

I am trying to set up a small windows network but am having trouble connecting to my NAS. The set-up is simple: My modem is connected to a wifi router to which notebooks/desktops/smartphones/nas are connected. Internet/network is working fine for wireless and also for computers connected to the router by cable. Assigned IP addresses are in the range of 192.168.0.100 to 192.168.0.199. Now by default the NAS has the address 192.168.1.100. There however it is not available..

View 14 Replies View Related

Find Network Key To Set Up Another Pc?

Jan 5, 2012

how do i find my network key to set up another pc

View 2 Replies View Related

How To Find Wep Network Key

Dec 26, 2011

My xbox is asking me to enter the wep key for network. where can i find that

View 1 Replies View Related

How To Find My Network Key

May 9, 2011

How can I recover the network key for this computer and how can I change it?

View 2 Replies View Related

Cannot Find Own Network But Everyone Else Can?

Jun 22, 2011

So at my workplace I am unable to find/detect and connect to this network that I just had connected to a few days ago. My fellow colleagues are able to connect to it yet I am not. However I know that my wireless adapter is working because I am able to connect to my home network easily, and can detect other work networks in my office building, in which there are at least 15.

View 1 Replies View Related