D-Link DIR-615 :: Number Of Wireless Devices Accessing Network
Jul 15, 2012
Just upgraded my system. I am using D-Link 615 as access point hardwired LAN to LAN to ActiveTec MI424WR N capable Verizon Fios Wireless Modem/Router. The Fios Router is set up with WPA2 security. Intend on having three 615s as Access Points off of ActiveTec. Have a number of wireless devices accessing the network. Have followed instructions from manual to use 615 as Access Point, disabling UPnP and the DNCP Server function on the 615. My ActiveTec IP address is 192.168.1.1 and I changed the 615 to 192.168.1.50. I can type this IP address in my browser and get to the 615 set-up.
I have tried a couple different options in naming the SSID on the 615 set-up. If I name the SSID on the 615 the same as the ActiveTec router, when I go to Connect to a wireless signal where there is overlap, there are two signals that one can connect to, named the same SSID, the Fios is WPA2 secured and the 615 is not. Shouldn't these all be on one SSID? It seems that I have two different networks (different SSIDs) instead of one (rather than the 615 simply serving as an extension of the Fios router as a wired remote access point) with different security protocols (WPA2 and None). The SSID name almost seems meaningless. If I name the 615 SSID the same as the Fios router SSID or something different, I still have the option of selecting one SSID that is secure and one that isn't. If I try to connect to the SSID name associated with the 615 I can get on without providing a password.How do I make it so that one can walk around and go from one area to the next and seamlessly move to the best signal? I did read to select different sets of channels for each access point.
View 3 Replies
ADVERTISEMENT
Jul 27, 2012
I recently noticed my 'Number of Dynamic DHCP Clients' on Network Settings is always empty. Before, it always registered a list since there are several devices that are connected to our wireless network (laptops, mobile phones, desktops).
View 3 Replies
View Related
Feb 11, 2011
I am currently using a DIR-655 for the home wireless network.DSL into a 2-Wire home portal (not wireless) and ethernet into the DIR-655.I need to connect a number of wired devices in a couple of different rooms. Some streaming HDTV content to other devices in other rooms. I'm thinking of the following:
-DIR-655 routing between the DSL subnet to the internet, the 2.4GHz wireless and a couple of wired devices.
-DAP-1522 routing between the 2.4GHz wireless, 5GHz wireless, and a few wired devices.
-DAP-1522 bridging between the 5GHz wireless and a few wired devices.
All devices will/may need internet access.HDTV content would be between wired devices and only over the 5GHz wireless (no HDTV to/from internet).Is the DAP-1522 the right device(s) for this?
View 2 Replies
View Related
Feb 5, 2012
We have a D-Link DIR655 wireless router on our network. I have purchased two Seagate 1TB network storage units and would like to have one for me and one for my wife. It seems that the router will not support two, because they try to access the same port. How can I plug these two storage units to the router and have access for each of us to one device?
View 2 Replies
View Related
Dec 25, 2012
Am I limited to how many devices can connect to my wireless router 802.11g
View 2 Replies
View Related
May 30, 2011
How do I block a particular IP from accessing my network entirely? I have a hacker with a known IP I want to shut out. I tried creating a DENY inbound filter (with just that IP as the range) but that didn't seem to work. that hacker kept being able to attempt logins.
View 7 Replies
View Related
Aug 22, 2012
If possible I would like to have access to my external hard drive from outside of my network.While in the network my laptop connects to the Hard Drive using the shareport. If I take the laptop with me then I would also have to take the External Drive with me.
View 6 Replies
View Related
Feb 1, 2011
Is there any way to access the router's configuration pages (192.168.0.1) via the Guest wireless network when routing between the zones is disabled?
Here's the story:
I am using my landlords wireless internet, but I administer the router myself. The router is 'upstairs' and i am 'downstairs' and he has his computer plugged into it plus one wireless laptop. He knows nothing about computers and is vulnerable to downloading viruses (and other ****) and I don't want my computers to be on the same 'network' as his.
I had a brilliant idea that since I am 100% wireless, I can make a guest network, put all my computers on that network and disable routing between them. Now all of my computers (some connected through a wireless bridge) can not see his computers at all (perfect!). The only problem now is I can no longer access the router config pages at 192.168.0.1!
Is there any way I can segregate my computers from his and also access the router config? I've tried accessing the WAN IP for the remote admin pages from inside the NAT, but it still blocks it.
View 6 Replies
View Related
May 17, 2011
I recently upgraded from Linksys WRT54G to D-Link DIR-655 firmware version 2.0. All the features are working as advertised however i am having difficulties accessing UPnP services in my network. I have a Samsung 55" internet enabled TV connected to the router and also have few devices that can stream over UPnP to the TV. The option to enable the UPnP is enabled in the router configuration however its not finding devices in the network ... comparing that with Linksys ... all i had to do is enable the UPnP and all my devices discovered each other and started streaming without any issue. What do i need to do in D-Link to enable the UPnP devices ...
View 14 Replies
View Related
Mar 4, 2011
I have two devices in my office which both need to be accessible externally. One is an FTP server (Hermstedt Stingray), the other is a NAS drive (Lacie). I don't have a static IP so have instead configured an account with DYNDNS. My understanding is that by using this method, only one device will be ever be accessible because of the one single dynamic IP. Is this correct? Or is there a way of configuring something somewhere (DYNDNS, router etc) so that both my devices can be accessed externally.
View 3 Replies
View Related
Sep 9, 2012
I have a Netgear modem/router [DGN1000] (192.168.0.x) that serves as a the router for network 1 and also as the internet gateway. I have a Cisco [E4200] (192.168.1.x) router connected to the Netgear modem via the WAN port on the Cisco. This serves as the router for network 2.
DHCP is turned on for both routers. I can access all devices on network 1 using any device o network 2 including the Netgear modem configuration page, but I cant access any device on network 2 from network 1. Is it possible to have access to devices from both networks? [URL]
View 3 Replies
View Related
Sep 27, 2011
I have a single WRT54G v5 that has treated me very well over the years. I have too many devices right now and I'd like to throughput of N, but have failed to find one that is measurably faster or as stable than my current equipment. Most recently I tried a D-Link DGL-4500 and regardless of hours of configuration, research and support I was left with slower-than-expected speeds and dropped connectivity about once a day.
I want to be able to stream media to all 3 BoxeeBox's simultaneously while browsing the internet on a few of my devices and I don't want to have to reboot my router daily or even weekly.
So far I have come to a preliminary conclusion that a solid setup for me would be a ZyXEL ZyWALL USG20 and 2 to 3 Ubiquiti UniFi AP's. While the USG20 does intimidate me, I have several solid network admins that have told me they'll set up the network for me and walk me through it.
View 19 Replies
View Related
Jun 11, 2012
We are using acs version 4.2.0 build 124 on windows server 2003. Our domain controller has been upgraded from 2003 to windows 2008 R2.Now we are facing following error in ACS authentication for accessing our devices.Error: AUTH 06/09/2012 11:55:40 E 1810 3316 0x8f21 External DB [NTAuthenDLL.dll]: Windows authentication FAILED (error 1326L)if we restarted services of ACS server then users get authentiated fine.
View 1 Replies
View Related
Mar 29, 2013
I want to setup a simple VPN to allow users to access the office via the iOS (iPad/iPhone) devices. I assume I do this through:
VPN>IPsec>Basic VPN Setup
BUT, what do I enter for the "Endpoint Information" and "Secure Connection Remote Accessibility"?
View 1 Replies
View Related
Jul 16, 2012
Dir 615, hardware version E4, Firmware version 5.1.Intermittent (95% of the time), problem accessing Google using my Android via wireless. A PC using XP on the same network has no problems. Using the Android on my local library's network I have no problems.Have restored to factory default settings and reconfigured with no improvement.
Modem setup: Setup to connect to another router, UPnP disabled, DHCP server disabled, 802.11 mode -mixed 802.11n & 802.11g (Android connects using 802.11n PC uses 802.11g have forced Android to use 802.11g to no avail), Auto channel scan, (have tried fixed), Channel width 20/40, visible mode.Internet connection Dynamic IP of course it is going out through my other Dlink ADSL 2 modem router. Also disabled QOS engine.
View 9 Replies
View Related
May 17, 2011
This is the configuration I am running:Internet > Cable Modem > Netgear WNDR3700 Router ~~ DAP-1522 > Wired Windows 7 PC + Linux PC + Printer.The Windows 7 and Linus PC's do communicate well to the internet as do any laptops accessing the router wirelessly and any devices wired to the router. That is the good news.
The bad news is that any devices located after the DAP-1522, including the DAP-1522 do not show up on the network map of either the router or any of the wireless laptops. Neither does the Win 7 PC connected through the DAP-1522 show any networked devices, whether through the DAP-1522 or not, even though network discovery is turned on.
Right now the DAP-1522 is set up to function as a bridge and is in "Static IP" mode. I tried changing it to DHCP, but the DAP-1522 will not allow saving that setting, even though it will allow changing it. It just reverts back to "Static IP". The firmware version is 1.31, and the firmware update went well after a workable logon to the admin page was discovered. Also the one-button (WPS) set-up to the router worked as far as allowing an internet connection.
What needs to change to allow all the devices to show up on the network maps and maintain internet access? Ultimately, I would like to stabilize the IP's of the major components of the network to make troubleshooting easier. But to do that the devices need to show up on the network maps, particularly of the router, so they can be added to the IP reservation table by selection.
View 2 Replies
View Related
Mar 7, 2013
Region : India
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP : Lexus
I am using tp link router for accessing internet in my laptop and mobile. everything is opening in my laptop but i had few problems when using internet in mobile. im using android mobile. when using play store the images and screen shots of applications are not loading but im able to download. I'm unable to see the images in play store. So I'm thinking that there is something problem in router settings.
View 4 Replies
View Related
Nov 16, 2011
have a home network and access it thru an ATT wireless router. I also have a wireless printer but unable to access it vis the network. I ran ipconfig. I can see ip address for the router, ie, the Ethernet adapter wireless network connections: IP add, Submask, Default, DHCP Class Id. I also see 'Media State....Media Disconnected' Could this affect not having access to the wireless printer?
View 3 Replies
View Related
Jan 7, 2013
Region : NewZealand
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I've plugged in a USB flash drive and enabled shared storage on my TL-WR1043ND router. With "Access shared storage with password" unticked, I can access the share using both my Windows 7 Laptop and Motorola Defy+ (with ES File explorer) and successfully play any Music off of the network share using the Android App, ES File explorer.
If I enable "Access shared storage with password" and attempt to log in using any of the user accounts I've set up on the device, I will be able to access the shares using the credentials on my Windows 7 Machine, but not with my Motorola Defy+, instead I will simply receive "Login failure". I'm Picking it has something to do with the network share type?
View 4 Replies
View Related
Aug 7, 2011
I've got the below setup, have the wrt320 setup as a switch / wifi ap, i'm totally unable to access its management page from pc1 but am able to via pc 3, why is this, how can i get around this? Routing? Also am unable to access pc3's resources from pc1..When i enter the ip of the wrt320 it thinks about it and before it has come up with the user/password screen but it soon dissapears and firefox comes up with a "Unable to connect Firefox can't establish a connection to the server at 192.168.0.2." message.
View 1 Replies
View Related
Jun 13, 2011
I'm the IT Manager for a Small Non-Profit Organization(facilitating build homes, giving education, health care for the poor).All computers are connected to a network through a Linksys E1000 Wifi Router and I would like to access all computers remotely especially when I'm on my site visits or when I'm not in the office. Is there a way for me to join the network even if I'm outside the office.
View 5 Replies
View Related
Jul 27, 2012
As the title states, I am want to set up a single ADSL connection, using 1 router across 6 apartments. The apartments are 2 floors and from the top they look like this The Router is on Apartment 1. Between apartment 1 and 2, 3 and 4, and 5 and 6 is a normal cement wall. Between 3 and 4 is Cement and stone, so are the outside walls of each house. I was thinking of doing it simple and using 3-4 range extenders such as the Linksys RE1000. From what i searched on the internet, and what the documentation states, the signal will get bottle-necked for the last house due to the RE1000 giving half of the bandwidth. Quote from Linksys FAQ: Quote: 7. Can I add more than one RE1000 to my existing wireless network? Yes. But since the RE1000 only gets half of the wireless signal from your main router or access point, adding multiple range extenders can provide you with even lower signal, thus, giving lesser bandwidth to your wireless computers or devices that you are going to connect to these additional extenders.So, what would be an optimal solution to this? Should I go ahead and install the RE1000's? Is there something better that i can do?
View 5 Replies
View Related
Oct 3, 2010
My wired devices can see my wireless devices, and my wireless devices can see my wired devices, but my wireless devices can't see other wireless devices. And by "see", I'm talking about various media servers, like TVersity, PlayOn and Windows Media Center, and by devices, I have two wireless computers, an Xbox, and a DAP-1522 bridge, among others.Is this how the DIR-825 works, or am I missing a setting to allow the wireless devices to see and communicate with each other? Specifically, I'm trying to connect my wireless N Xbox 360 with a wireless N Win 7 Home Pro laptop.
View 2 Replies
View Related
Dec 6, 2011
Any step by step instructions (for the DIR-655) on how to block a PS3 from accessing this router? I know how to log into the router's page and I can get the MAC address of the PS3, but I am clueless from there. I want to block it completely is possible.
View 7 Replies
View Related
Dec 26, 2011
This has been happening for about the last two weeks now. Before we never had any problems. So now all wireless devices keep on getting disconnected almost daily.
I have a laptop, 2 Iphones, an Xbox 360, and a Xoom Tablet that keep getting disconnected. The Desktop, which is directly connected to the router via a cable is fine and never gets dropped.
I tried changing channels, and wireless mode is now G only. Still keep getting dropped.
View 1 Replies
View Related
Jan 11, 2013
i have a question about accessing shared folders over the WAN-Port of an DIR-615. For your information: both sides of the network (LAN and WAN) are under my control.
On the WAN-side of the network we have a fileserver with shared files. We can ping the server and reach it and the Websites on this server are also reachable from the LAN-side. But if we try to access to the shared folders the request doesn't reach the server. If we change the router there are no more problems and anything works without problems. The Router has default-settings except the network-settings so it works in our network. Does this router block outgoing traffic on ports 135-139 and/or 445? And when yes is there any way to disable this? I can't find it.
View 4 Replies
View Related
May 26, 2011
I recently purchased the dir-655 router, and am impressed by it's speed. I had no problems configuring the router to my liking, and have found that all of my wireless devices communicate with it flawlessly.
However, my main reason for purchasing this router was for the USB port. I had hoped to connect my 2TB external drive and have it accessible by all wireless devices in my home. To my understanding, the USB port relies on the use of the Shareport Utility. I've installed the Shareport Utility to my laptop for wireless access to my media files for streaming.
Here's my problem. How can I access my media on my external HDD connected to the dir-655 with Apple TV2? I've read several options for PS3 users... and they all seem to involve leaving the pc/laptop running. I would ultimately like to bypass the necessity of leaving my laptop on... but if that's not a possibility, I can live with it being left on.
Therefore, is it possible to access the external drive connected to the dir-655 with my Apple TV 2 by using the laptop as a bridge? Can I access the content via Apple TV by using Windows SMB just as I currently do to access media stored on my laptop?
To summarize, I want to have access to the media on my external drive connected to the dir-655 via Apple TV2.
View 1 Replies
View Related
Sep 1, 2012
I have a DIR-615 router. I would like to know if it is possible to block a PS3 from accessing the internet completely, without blocking any other computers/devices. I have access to the router, but not to the PS3 itself.
View 3 Replies
View Related
Dec 26, 2011
I have a DIR-655 with the latest firmware 1.35NA. I also with a wireless connection to a Grace internet radio and a DAP 1522 (with the latest firmware 1.31) set up as a bridge with my direct tv box connected . The DIR-655 ip is 192.168.2.1, Grace radio ip is 192.168.2.177, DAP-1522 ip is 192.168.2.3 and Direct TV box ip is 192.168.2.173. My PC is hardwired to the DIR-655. I can ping all devices from my PC, but cant ping the DAP 1522, Direct TV Box or Grace Internet Radio from my IPAD. I have no trouble connecting to the DIR-655 from my Ipad. It only seems to be anything thats connected wireless to the DIR-655 that I cant access from my IPAD. All devices have the same subnet of 255.255.255.0 and gateway of 192.168.2.1.
View 7 Replies
View Related
Mar 24, 2011
I recently went into my router and changed my security settings so that my router is WEP protected. I was having issues with somebody feeding off on my connection and causing problems with my Internet provider. I had changed it to be a secured network before but somehow it became unsecured. So, I set up an admin password and such so nobody else should be able to get into my outer . Anyway, after setting it up to with the WEP, now I cannot access the Internet from any other device except my main PC to which the router is connected.I usually get some sort of error stating that there is "limited on no connectivity" when I try to connect my laptop or Archos Home Tablet device. Yet, is reads that the signal strength is excellent and recognizes my network as existing.
View 7 Replies
View Related
Feb 5, 2012
My Dlink router has been working fine until recently. The only changes I made was to try to put time limits on my kids' devices, through Tools->Schedules and Advanced-> access control. Things worked Ok, but I soon realized I had to reserve each kids' device DHCP number, or so I thought(?) Anyhow, now I seem to have to log into my dlink router weekly as their wireless connection stops each week. Not sure if it affects the non-reserved wireless devices. Not sure what's happening or what I did wrong. Running the following: DIR615 hardware Version B2 Firmware 2.25 Under DHCP Server settings: Enable DHCP server - checked Addrss range 192.168.0.100 to 192.169.0.199 Note - reserved ips in that range Lease time 1440 minutes Always broadcast - checked rest blank NetBIOS type Mixed mode.
View 1 Replies
View Related
Feb 2, 2011
I have a Comcast modem and a DIR-655 router. I finally got them to work together (it took some doing!) and now the router has stopped working with my Roku player and laptop. It still works fine with the desktop that's wired into it.
View 6 Replies
View Related
Mar 9, 2011
I am wondering if all routers that have a USB port to which network storage can be attached, support the functionality to enable that storage to be accessed from outside the network. If this is true how (in a conceptual sense) can the router be configured to do this and what are the security implications?
View 2 Replies
View Related
