D-Link DIR-655 :: Wireless Devices Keep Getting Disconnected?
Dec 26, 2011
This has been happening for about the last two weeks now. Before we never had any problems. So now all wireless devices keep on getting disconnected almost daily.
I have a laptop, 2 Iphones, an Xbox 360, and a Xoom Tablet that keep getting disconnected. The Desktop, which is directly connected to the router via a cable is fine and never gets dropped.
I tried changing channels, and wireless mode is now G only. Still keep getting dropped.
View 1 Replies
ADVERTISEMENT
May 21, 2012
While playing on Diablo 3 using DIR-615, it will always get disconnected from server after 2 to 20 minutes. The router firmware version is 7.12.
View 4 Replies
View Related
Jan 8, 2009
The setup:
Time Warner Cable Internet Dynamic IP
DIR-655 A3 Firmware 1.21
3 hard wired, fully updated, virus free, windows xp pro machines
The Issue:When only one PC is running or actively being used there is no issue. However, when there is moderate internet usage on a second pc the internet connection will drop (the WAN light on the router stays on as does the ethernet light on the modem) and give this pair of log entries.
View 14 Replies
View Related
Oct 3, 2010
My wired devices can see my wireless devices, and my wireless devices can see my wired devices, but my wireless devices can't see other wireless devices. And by "see", I'm talking about various media servers, like TVersity, PlayOn and Windows Media Center, and by devices, I have two wireless computers, an Xbox, and a DAP-1522 bridge, among others.Is this how the DIR-825 works, or am I missing a setting to allow the wireless devices to see and communicate with each other? Specifically, I'm trying to connect my wireless N Xbox 360 with a wireless N Win 7 Home Pro laptop.
View 2 Replies
View Related
Dec 26, 2011
I have a DIR-655 with the latest firmware 1.35NA. I also with a wireless connection to a Grace internet radio and a DAP 1522 (with the latest firmware 1.31) set up as a bridge with my direct tv box connected . The DIR-655 ip is 192.168.2.1, Grace radio ip is 192.168.2.177, DAP-1522 ip is 192.168.2.3 and Direct TV box ip is 192.168.2.173. My PC is hardwired to the DIR-655. I can ping all devices from my PC, but cant ping the DAP 1522, Direct TV Box or Grace Internet Radio from my IPAD. I have no trouble connecting to the DIR-655 from my Ipad. It only seems to be anything thats connected wireless to the DIR-655 that I cant access from my IPAD. All devices have the same subnet of 255.255.255.0 and gateway of 192.168.2.1.
View 7 Replies
View Related
Mar 24, 2011
I recently went into my router and changed my security settings so that my router is WEP protected. I was having issues with somebody feeding off on my connection and causing problems with my Internet provider. I had changed it to be a secured network before but somehow it became unsecured. So, I set up an admin password and such so nobody else should be able to get into my outer . Anyway, after setting it up to with the WEP, now I cannot access the Internet from any other device except my main PC to which the router is connected.I usually get some sort of error stating that there is "limited on no connectivity" when I try to connect my laptop or Archos Home Tablet device. Yet, is reads that the signal strength is excellent and recognizes my network as existing.
View 7 Replies
View Related
Feb 5, 2012
My Dlink router has been working fine until recently. The only changes I made was to try to put time limits on my kids' devices, through Tools->Schedules and Advanced-> access control. Things worked Ok, but I soon realized I had to reserve each kids' device DHCP number, or so I thought(?) Anyhow, now I seem to have to log into my dlink router weekly as their wireless connection stops each week. Not sure if it affects the non-reserved wireless devices. Not sure what's happening or what I did wrong. Running the following: DIR615 hardware Version B2 Firmware 2.25 Under DHCP Server settings: Enable DHCP server - checked Addrss range 192.168.0.100 to 192.169.0.199 Note - reserved ips in that range Lease time 1440 minutes Always broadcast - checked rest blank NetBIOS type Mixed mode.
View 1 Replies
View Related
Feb 2, 2011
I have a Comcast modem and a DIR-655 router. I finally got them to work together (it took some doing!) and now the router has stopped working with my Roku player and laptop. It still works fine with the desktop that's wired into it.
View 6 Replies
View Related
Jan 5, 2013
Just bought a dir-655, set it up (all though the wizard wasn't working, it kept getting stuck on step 5 of 7) so I just configured everything manually.I'm getting 2.4 MB/s speeds wirelessly.I was expecting much better, my wireless g linksys router did just slightly lower than that. My xbox 360 can't even stream HD without buffering every few mins. It also will just stop, and be unable to see the media for a couple minutes (when doing HD).I have wireless setup as WPA2, and the devices I use wirelessly are N devices. I have the router setup to only use wireless N.
View 14 Replies
View Related
Jul 15, 2012
Just upgraded my system. I am using D-Link 615 as access point hardwired LAN to LAN to ActiveTec MI424WR N capable Verizon Fios Wireless Modem/Router. The Fios Router is set up with WPA2 security. Intend on having three 615s as Access Points off of ActiveTec. Have a number of wireless devices accessing the network. Have followed instructions from manual to use 615 as Access Point, disabling UPnP and the DNCP Server function on the 615. My ActiveTec IP address is 192.168.1.1 and I changed the 615 to 192.168.1.50. I can type this IP address in my browser and get to the 615 set-up.
I have tried a couple different options in naming the SSID on the 615 set-up. If I name the SSID on the 615 the same as the ActiveTec router, when I go to Connect to a wireless signal where there is overlap, there are two signals that one can connect to, named the same SSID, the Fios is WPA2 secured and the 615 is not. Shouldn't these all be on one SSID? It seems that I have two different networks (different SSIDs) instead of one (rather than the 615 simply serving as an extension of the Fios router as a wired remote access point) with different security protocols (WPA2 and None). The SSID name almost seems meaningless. If I name the 615 SSID the same as the Fios router SSID or something different, I still have the option of selecting one SSID that is secure and one that isn't. If I try to connect to the SSID name associated with the 615 I can get on without providing a password.How do I make it so that one can walk around and go from one area to the next and seamlessly move to the best signal? I did read to select different sets of channels for each access point.
View 3 Replies
View Related
Jan 19, 2013
Is possible to setup DIR-655 as a Wireless receiver passing the signal to the other devices by ethernet?
View 2 Replies
View Related
Nov 29, 2012
Region : UnitedStates
Model : TD-W8961ND
Hardware Version : V2
Firmware Version :
ISP : ATT
I want to add more users to my home network and I couldn't, at this moment I only can connect 8 devices (12 devices at least) when I try to connect the next one its impossible, but if I take off one of the connected devices then the router allows to connect the new one.How can I connect more than 8 devices to my router ? (wireless)Also, is there any limits with Wireless MAC Address Filter ? because I can't add more than 8 MAC addresses in my old router I could do that.
View 4 Replies
View Related
Mar 23, 2013
Region : Australia
Model : TL-WR941ND
Hardware Version : WR841N v8
Firmware Version : 3.13.27 Build 121101 Rel.38183n
Model : TD-W8968
Hardware Version: TD-W8968 v1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
I have two routers, a TP-Link TD-W8968 (main & connected to ADSL) and a TL-WR841N (client) and I'm trying to get WDS working over them in order to use my PS3/media player etc at the tv.
1) are these 2 pieces of hardware compatible for WDS? Status of both hardware seems to indicate yes
2) if compatible, what am I missing so devices behind the client router can access the internet connection.
View 10 Replies
View Related
Feb 24, 2011
Ive had this 655 for about a year now and it has been rock solid. But, there has been one slight issue.
And and all wireless devices can see each other and all wired devices can see each other....but the wired cant see the wireless and vis versa.
The wireless devices (W7 and Vista laptops) can see the wired devices when they are plugged in. But my phone and Galaxy Tab can only see whatever wireless devices there are (cant be plugged in). Even my wired Samsung TV cant see the shares on the Tab or wireless laptops (and vis versa). So, its certainly not a firewall or OS config issue.
Now, I made sure they are all connecting via the main SSID and not the "isolated" Guest SSID....but its acting like the main SSID is isolated from the wired LAN somehow.
Firmware 1.34. IPs for the wired and wireless devices are all in the 1.2 - 1.50 range.
View 14 Replies
View Related
Jan 28, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1.8
Firmware Version : wr1043nv1_en_3_13_12_up_boot(121210)_UN_beta
ISP : fibertel argentina
The TP-Link managers surely have read the constant complaints about the performance of the WR1043ND, are innumerable and of all kinds, but especially, due to instability.There are two beta versions, but they are very unstable.I beg, TP-Link, keep us informed on the development of the new firmware.When I bought this router, I was hoping a correct performance.
View 3 Replies
View Related
Feb 9, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.00
ISP : Tiscali/Talktalk
I have just bought and setup this router, Wired connection working fine, Problem is no devices seem to connect to wireless, my other PC, phone etc find the router with strong signal, I enter the key but nothing happens. I tried with my phone and stood next to the router and it connected but dropped out when I walked a few feet away.
View 6 Replies
View Related
Jan 9, 2013
I have a DIR-655 that I have been using for a while (b1 revision). and suddenly I noticed my wifi speed fluctuates constantly. My lenovo Y580 sees speed drop to 130 immediately and then it can slowly progress to 1 Mbps until the hardware is all rebooted. Same happens to my Nexus 7, Dell XPS M1530 and to my roku. I have updated to 2.07 (since 2.10 is advised to avoid). And I have attempted changing channels or factory refresh.What Firmware version is currently loaded? 2.07What region are you located?
What ISP Service do you have? Cable or DSL? Cable (link speed independent of internet speed)What ISP Modem do you have? Stand Alone or built in router? Separate Motorola ((link speed independent of modem)What ISP Modem make and model do you have? Does not matter, router issue.If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. Not bridged
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic. Independent of issue, not a factor
Turn off all devices accept for one wired PC while testing. Wired works perfect.Check cable between Modem and Router, swap out to be sure. Cat6 is recommended. Wireless issue.
View 6 Replies
View Related
Sep 27, 2011
I have a single WRT54G v5 that has treated me very well over the years. I have too many devices right now and I'd like to throughput of N, but have failed to find one that is measurably faster or as stable than my current equipment. Most recently I tried a D-Link DGL-4500 and regardless of hours of configuration, research and support I was left with slower-than-expected speeds and dropped connectivity about once a day.
I want to be able to stream media to all 3 BoxeeBox's simultaneously while browsing the internet on a few of my devices and I don't want to have to reboot my router daily or even weekly.
So far I have come to a preliminary conclusion that a solid setup for me would be a ZyXEL ZyWALL USG20 and 2 to 3 Ubiquiti UniFi AP's. While the USG20 does intimidate me, I have several solid network admins that have told me they'll set up the network for me and walk me through it.
View 19 Replies
View Related
Jan 30, 2013
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820
ISP :
Region : UnitedKingdom
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820
ISP : BT Infinity
I am running a Windows Home Server machine called "mserver" that has an IP address supplied via DHCP.There is also a local webserver running on port 8089 that I use to access media from several devices (Android Phone, Blackberry Playbook & HP Touchpad...i.e. not Microsoft).When I had the BT Homehub3 in use I could access the webserver via http://mserver:8089 and it would be loaded on all devices. With the WDR3600 used in place of the Homehub3 it cannot resolve mserver into a local IP address on a non windows device. I can access it via http://192.168.0.xxx:8089 so the route is there.Does the WDR3600 have any local DNS resolution? I repeat the BT HomeHub3 CAN do this, so why can't the TP-LINK?
P.S. I have tried :-
Disabling hardware NAT
Turning off UPNP & Port Forwarding
Restoring to factory default
Disabling all ALG's in security
View 3 Replies
View Related
May 3, 2013
Region : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 22.05.2012
ISP :
I have a TD-W8951ND v5 on the latest firmware.
I recently broke my broadband data cap which surprised me as I had not been using the internet much.
I only have tablet which I switched off having first checked the router to make sure there were no other wireless connections and adding MAC address filtering to be sure no one else was stealing my bandwidth. With just my router connected to the ISP, my ISP has recorded 170MB of downloaded data in 3.5 hours. Switching off the router stops the traffic being recorded (as you would expect), but when switched back on the large data transfers start up again.
I have plugged in an older router (not wireless) and no traffic is generated, so it seems to be the TP-Link router rather than my ISP or ADSL circuit that is at fault.
View 1 Replies
View Related
Mar 31, 2011
I just installed my new DIR-655 yesterday and it went pretty smoothly. However, only my Notebook PC is connecting as 802.11n. All my other devices that are N capable are connection at 802.11g. These devices are XBox 360 Elite with wireless N adapter, 2 wireless N Roku Players, and Lexmark X6570 Printer. Is there some way to get the router to see these devices as N capable short of forcing everything to connect as 802.11n?
View 6 Replies
View Related
Aug 15, 2011
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies
View Related
Oct 11, 2012
All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
View 1 Replies
View Related
Jan 9, 2009
I have disabled all antivirus and firewall services on my PC and I can't get Shareport icon to turn green and recognize my DIR-655 (Hardware Version A4, 1.21 firmware). I've uninstalled the Shareport software twice. I use AVAST (but all services are disabled).The router setting is set to "USB Network" with a 30 second time out. I'm running WinXP SP3, 802.11G only.
View 11 Replies
View Related
Jul 6, 2011
The problem that I'm having is basically that my router isn't giving right ip addresses to my devices. I've tried to connect a wireless printer (HP for doubts) and the router gave a 169.254.XXX.XXX ip address to it. If I unplug/plug the router, the problem is solved. It can also be fixed by using the "reboot device" tool that the router has at the configuration page. But this only works for some hours, so it isn't
Now, it isn't a printer problem. It has also happened with some notebooks, with around 5 to 6, not all of them. I've tried changing channels, resetting the router, changing password, security password type, changing firmware (present is 3.11NA H/W C2), and nothing can fix it.
View 1 Replies
View Related
Jul 11, 2011
i have had a DIR-655 Rev. A router for years now and had no problems connecting my laptop to it well over 150m, the iproducts never got over 65m, i'm OK with that if they just won't but i would like to get there if possible. i went out and picked up a 2nd 655 (rev B) and flashed the bios up to the newest version 2.03NA and went in and mirrored all of the settings from the original router and then replaced the old router with the new one. the old router is not being used at this time though there are plans to use it as an access point later in another part of the house. i have updated the drivers for the wireless N card on my laptop (i can't remember the name of the adapter or the model, i'll provide that when i go home for lunch today). i've tried various settings for security, (i want to use WPA2 only, personal key, AES cipher, channel width 20/40 auto) i've even tried no security and it still won't connect over 65m.
View 14 Replies
View Related
Apr 5, 2012
We can only connect 2 devices at a time. Someone suggested that it may be a setting with my wireless router.
View 2 Replies
View Related
Feb 3, 2013
I have just switched to a new internet provider (UnityMedia in Germany) and they provided me with a CISCO cable modem (EPC3208G) and a 'wireless N 150 Home Router DIR-600' (hardware Bx and firmware 2.13). I had to ring the service desk to complete set up. I was told to connect the LAN cable (from the modem) into LAN number 1 rather than 'internet' (in the router). I was also told to change the router IP address to 192.168.0.2. Thereafter the connection to the internet was established (they also asked me to make some other changes which I can no longer recall). However after the phone call with the D-link service desk I attempted to connect my other internet enabled devices (kindle, internet radio and smartphone) and apart from one other laptop nothing can connect to the internet.
View 5 Replies
View Related
May 21, 2012
I cannot see my synology NAS from my WDTV Live players (or PS3 or Samsung TV) when the NAS connected directly to one of the 4 GbE ports on the 655 using media server (DLNA) protocol. I've moved the NAS to another location on my network and not directly connected to the 655 and all the other media players see it except for the WD that's connected to one of the ports on the back of the 655. As a work-around, I have set the WD player that's connected to the 655 to use network shares instead of DLNA and this seems to work fine. So, there must be something that the 655 is doing wrt the DLNA protocal that is blocking communications.I have the 655 configured as an access point and have turned off DHCP and every other function that could be causing any issues. I've turned UPNP on and off to see if it resolves the problem, and although it seems to have some bearing on the problem, the issue persists. I also have a DIR-645 also configured as an access point (not connected to the 655) and have the synology NAS connected directly to it and it works just fine. All media players can see the NAS except for the one that's connected to the 655.I've been having this issue for some time now and have worked around it by moving the 655 so it wouldn't be an issue. However, I needed the wireless and gigabit switch capability upstairs and am battling this issue once again. I'd really like to keep the 655 and get this working, but it seems as the 655 is the culprit here.
View 5 Replies
View Related
Mar 21, 2012
I am currently having issues with the dhcp function on my DIR-615. The issue is some of my devices are never able to connect unless I set them up with static ip. Some of my devices are sometimes able to connect using DHCP but sometimes need to be set up with a static IP. In the log it says something along the lines of "sent out offer for IP 192.168.0.XXX" but the devices never receives the IP. The firmware says it is up to date. The hardware version is C1. Some of the devices having issues are PC's some are Macbooks and some are iphone and ipods. I'm not sure if it is related but when I look at who is using WAN some of the pc's who are connected to the internet have an ip address of 0.0.0.0.
View 3 Replies
View Related
Nov 12, 2011
I have a logitec LAN-WH300ANDGR(not logitech) wireless router, it's been working fine for months. Yesterday I enabled port forwarding, but after that I kept getting disconnected from the internet.I updated the router, but no joy.So I disabled port forwarding but I still get disconnected and now I cannot access my router's webpage [URL] the page will not load.
View 1 Replies
View Related
Apr 12, 2011
I was able to connect smoothly to any preferred connections in my area including my own. But now, it doesn't let me connect wirelessly to any of them. Now I typed ipconfig and this is what showed up.
Ethernet adapter Wireless Network Connection:
[code]...
View 3 Replies
View Related
Dec 15, 2012
I am not able to connect my laptop wth router... There is APIPA problem in network.
View 1 Replies
View Related
