Wireless Connection Disconnected?
Dec 15, 2012I am not able to connect my laptop wth router... There is APIPA problem in network.
View 1 RepliesI am not able to connect my laptop wth router... There is APIPA problem in network.
View 1 RepliesI want to share PC internet (PPPOE connection) on my linksys wireless router (E3000)Problem : When i directly connect internet wire in router, pppoe connection frequently gets disconnected. So what i wanted was to share my pc internet on router.I have two lan card on windows 7 installed PC, 1st lan card is connected to internet cable and i can access internet on pc, second lancard is connected to wireless router. So basically what i want is to share pc internet ( PPPOE ) on wireless router through DHCP connection type.
View 1 Replies View RelatedI just installed the free vpn client spotflux. The connection works fine, but after I disable the vpn again windows 7 seems to not use my "normal" ethernet connection anymore. I'm pretty sure that it will use that connection if I deinstall spotflux again but how to configure windows to use the normal connection when the vpn is not connected?I've attached a screenshot of the LAN connection settings and the priority list - but still it doesnt seem to work. What am I doing wrong?
View 1 Replies View RelatedCan't connect to the wireless network that is in the next room but I can connect across the street, I keep getting the message that the LAN Media connection is DISCONNECTED on connection 2, the computer trys to RENEW the IP address but can never do it, I have run CMD propmts pconfig/release, ipconfig/renew, ipconfig/all nothing works for my home system yet my laptop is connected my tower is running on the guy across the street.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Celeron(R) CPU 2.93GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 503 Mb
Graphics Card: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller, 64 Mb
Hard Drives: C: Total - 78523 MB, Free - 64075 MB;
Motherboard: ASUSTek Computer INC., Govii
Antivirus: Spy Sweeper with AntiVirus, Updated: Yes, On-Demand Scanner: Disabled
sometimes the ethernet led is not glowing even if the cable is plugged in. how can i resolve this?
View 1 Replies View RelatedI have brought a broadband connection from a local ISP called YouBroadband. (I am from India, if you are wondering.) For the first month of my plan, I was having internet connection without any issues. But since 2nd month, I am experiencing a very strange problem. When I turn on my PC and connect to internet by entering my password, I do so without any problem. But after a few mnutes of connectivity, I loose my connection. Even stranger is the fact my Windows 7 Ultimate edition does not recognise this. It still shows connected sign in the notification area. But I am not able browse any more using any browser. to solve the problem, I start network troubleshooting, which in a few seconds shows, resetting 'Local Area Connection 2' and then I am able to log in again. At times this solution also doesn't work. All i can do at that time is shut down my PC, wait a few minutes and restart again. To my extreme dismay, this keeps happening over and over again. I connect, get disconnected, reconnect and again disconnect. This is terribly disturbing and annoying.
I have searched on Google with no success. I tried changing DNS server settings and put Google open DNS address as my preferred DNS server but that didn't solve the problem too.( I received this tip from a friend of mine.) Here's what I get when I type ipconfig/all in Command prompt-Windows IP Configuration[CODE]
I have a small network, about 35 computers.There is 20 LAN PC computers (they use dns, active directory, dhcp), and there is 10 laptops. They connect on same D-Link wireless router( radius server authentication).After most of laptops is operational(connected on wireless router and on domain ), same two laptops always disconnect, and they can't regain connection . All laptops also get their ip addresses through dhcp.I tried all kind of wireless router configuration, I don't think it is dhcp or dns server problem, remote access policy is also very simple
View 13 Replies View RelatedIs there any software that will prevent my internet connection from getting disconnected no matter the cause ?
View 5 Replies View RelatedI have a US Robotics 5462 router and a D-Link DCM-202 cable modem on Comcast. I've had this router for years and initially configured it for wireless access using a Windows XP system (this router requires you to configure it via Ethernet and 192.168.2.1). That computer stopped working last year, so I got a new computer running Windows 7.When I first got this new PC, I could not connect to my router via Ethernet (just like I can't now), but I was still able to connect to the wireless network I had previously set up, so I was satisfied.
A year went by, and last week I was suddenly unable to access my wireless network, so I did a factory reset on the router, erasing my previously configured wireless network and requiring me to connect the router to my computer via Ethernet to reconfigure the router. I tried to do this, but despite all of the correct LEDs being lit on the router, I could not access 192.168.2.1. A little poking around on my control panel revealed that my LAN was being labeled as an "Unidentified Network" and there was "No Internet Access." I tried to make it a private network, but that didn't fix the issue.
I searched around for a while and read some advice to try running ipconfig. When I did that, I saw "Media Disconnected" for my LAN adapter. I've tried a few of the possible solutions already with no luck. With the same computer and the same Ethernet cable directly connected to my modem instead of through the router, I *CAN* get online. That's how I'm connected right now. Also, I have no problem accessing any wi-fi networks.
I have been searching forums for the last 2 hours and trying to figure out how to make this work. I tried to release/renew and it told me it couldn't and got the media disconnected message. I tried the TCP/IP and Winsock renew and that didn't work either. My internet was working OK and then all the sudden it stopped working. [code]
View 11 Replies View RelatedI have a laptop - Lenovo E43 in which i tried to connect with wifi, when wireless nework connection is opened, it is showing No wireless networks were found in range. and when IPCONFIGured, Media state...:Media disconnected is displaying under the Ethernet adapter Wireless Network connection.
View 1 Replies View RelatedI just installed nVidia Nforce drivers for my Asus 750i motherboard, I show I have internet connection, however I can not get windows to pull up a site. TRIED everything reset modem, router, checked all settings. When I pull up the networking system information, it states connection status: disconnected via the Nvdia controll panel. Reset everything back to factory defaults still nothing....IT was working, I intalled I tunes, and then it stopped....I uninstalled Bonjour thinking that it might be the issue....nothing
View 1 Replies View RelatedI have a 5520 ASA running 8.2(1) and ASDM 6.2(1). The ASA has been running for 223 days without issue. Today it stopped showing real time status on the Device Dashboard from within ASDM. All of the graphs state "Lost connection to Firewall."I try to manually reconnect but it will not. I have tried on a couple different computers and cannot get the monitoring connection to work.It is a very busy firewall and I will have to schedule for a restart (which I was thinking of doing) even though I do not see a memory issue as per snip below. I don't want to restart unless it is the best option.
View 13 Replies View RelatedRecently our ACS loss connection to AD. Notice following error message (collect from show tech):
Dec 9 00:05:31 OasPrp-Lvl07-ACS01 adclient[24514]: INFO <bg:ageBindings> base.
bind.healing Lost connection to myhqkul990003s.simedarbygroup.com. Running in di
sconnected mode: KDC refused skey: Preauthentication failed
[Code]....
However we manage to restore the connection by reset password of the AD account that used in establish connection between AD and ACS.
I have a logitec LAN-WH300ANDGR(not logitech) wireless router, it's been working fine for months. Yesterday I enabled port forwarding, but after that I kept getting disconnected from the internet.I updated the router, but no joy.So I disabled port forwarding but I still get disconnected and now I cannot access my router's webpage [URL] the page will not load.
View 1 Replies View RelatedI was able to connect smoothly to any preferred connections in my area including my own. But now, it doesn't let me connect wirelessly to any of them. Now I typed ipconfig and this is what showed up.
Ethernet adapter Wireless Network Connection:
[code]...
I recently did a recovery on my laptop and had to put everything back to factory settings (losing all my music, programs, etc) due to a hard disk issue that I couldn't fix otherwise. After several hours waiting for the process to finish I logged onto my laptop - a toshiba, and realized that my wifi isn't working. The computer says there is an issue with the LAN being disconnected, but my router is communicating fine with other devices. Also, the side switch that turns wifi on and off is lit up (indicating that it is on) despite the fact that Fn + F8 are not responding on my computer. Generally, the laptop cannot detect any wireless devices or routers.I did another system recovery after reading about the issue, and tried turning it on and off, etc, but with no success.
View 1 Replies View RelatedThe LAN adapter is disconnected since I'm not using it lmao. I meant the wifi adapter.So I bought this new laptop, ASUS G46vw but since yesterday I can't connect to the wifi. It connects but it shows as "Limited Connection - No Internet Access". I already went to the wireless adapter power proprieties - Power Management and unchecked the "allow the computer to turn off this device to save power" option. But I still get no internet access. [code]
View 1 Replies View Relatedregarding my wireless card conecting to the internet.
Firstly what happens is I coonect to my hub which is a sky router without a problem, the internet isnt a problem and gaming and so on, but from time to time and sometimes once every 15 mins the wireless icon in the bottom of the screen says it has disconnected then a few seconds later it reconnects this may seem trivial but when i am playing games and surfing the web it gets extremely annoying getting cut off. I have tested this on another router and it is the same problem, so i know its not just one isolated router. stop the wireless connection from disconnecting randomly.
This has been happening for about the last two weeks now. Before we never had any problems. So now all wireless devices keep on getting disconnected almost daily.
I have a laptop, 2 Iphones, an Xbox 360, and a Xoom Tablet that keep getting disconnected. The Desktop, which is directly connected to the router via a cable is fine and never gets dropped.
I tried changing channels, and wireless mode is now G only. Still keep getting dropped.
We have WLC 5508 installed in our premises to which 80 1242AG APs are connected. Few days ago, all the APs all of a sudden disconnected from Controller and rejoined after 12 to 15 hours. when we try to investigate, there was regulatory domain conflict occur. But we didn't understand that those APs were configured with the same config before. How come they got diconnected and now rejoined without changing any configration in WLC?
Logs for both AP and WLC has been attahched here.
If I have the wired cable plugged in to my laptop1 the wireless connection works fine. If I disconnect that wired cable then the wireless connection disconnects as well. I can watch this happening when I have the connection dialogs open showing the connection wizard dialogs.The other computers and printer work as expected without disconnects..I also have three other computers including another laptop connected to a switch and router.Here is the connection schematic:
Key to symbols:
>>>> wireless
------ wired
computer1 xp ---------switch1G--------router1------cable modem1
computer2 Vista---------switch1G-------router1
laptop1 Win7 >>>>>>>>>>>>>>>>>router1
[code]....
I have searched so many threads concerning the problem I am having but have yet to find anything that works.On Sunday my husband changed our router. We have just moved from Sky to Talk Talk. Before the change, my wireless connection was absolutely fine.Now, everything else in the house is working on wireless fine (xBox, my smartphone, hubby's PC) except for my crappy Lenovo N 500 (XP SP3).Here is a copy/paste from my ipconfig /all:[CODE]
View 19 Replies View RelatedI accidently disconnected my wireless adapter, how do i reconnect.
View 1 Replies View RelatedI have a fairly new Inpsiron 14z with windows 8 on it. Everything worked great out of the box, but all of a sudden my wireless stopped working. More specifically, it always says that the wifi is off, and pressing alt+f2 only cycles the bluetooth on and off, not doing anything about the wifi. Maybe I am just missing something stupid, I don't know. Here is my info:
Host Name: OS Name: Microsoft Windows 8OS Version: 6.2.9200 N/A Build 9200OS Manufacturer: Microsoft CorporationOS Configuration: Standalone WorkstationOS Build Type: Multiprocessor
[Code]......
I got 3 windows 7 pc's at home. IP V6 and IP 4 are enabled. I setup my wireless system and it worked 100%. After 3 months I add a LAN cable to two of my PC's. This is when it all started. My internet browsing became very very slow. When i shutdown the one machine it become fast again. I did the following. Pulled the LAN cable and it was still slow. I then put the cable back and disabled the Wi-Fi and it still was very slow. I rested the defaults and restored my old backup and it still slow. Now I can get any access to the internet any more. I the disconnected the netgear router and take a cheap router with only LAN ports and it work 100%. All the above i did with many router and server reboots.
View 1 Replies View RelatedSo earlier today I purchased a new video card, a PNY Nvidia Gtx 560. After installing the drivers through the disc, I ended up getting he BSOD, and my PC just kept on restarting automatically. I fixed that problem, and found out that I should install the drivers for it through their website instead. So, after restarting my PC yet again, I tried using the Internet (Chrome) and found out that I have no Internet connection. Now, I am writing this on my iPad using the same router and modem that my PC is supposed to be using, but I keep on checking my WLAN adapter and it says that it is Not Connected. Now I have tried every forum, every post, EVERYTHING related to this problem and not a single thing fixes it. Also, when I do the ipconfig, everything says Media Disconnected and that's it. PS, I tried unplugging/plugging back in my modem and router PPS, Is it possible that when installing my new gcard and psu that I may have messed up with something internally?
View 14 Replies View RelatedIm using an old tower with XP SP3. Most if not all drivers are up to date.I recently have come home from college where the computer connected to the internet through a cable and i now have to use wireless.I went out and bought a Trendnet TEW-648UB Wireless n adapter, installed it and tried to connect to my home network.It has been going from acquiring network address to no connection every ten seconds then repeating. I am fairly sure that this is not the router because i am on my sisters desktop which is a wireless connection and im on the internet. so far i have:
checked to make sure that WZC is enabled, it is.
tried checking and unchecking the Use Windows to to configure my wireless network settings
enabling and disabling my adapter
reinstalling my adapter
repairing connection
disabling any and all firewalls
ipconfig /release
ipoconfig /renew
netsh int ip reset reset.log
netsh winsock reset catalog
lots of computer restarting
and for good measure i pinged 192.168.4.1 and ping 24.229.54.212 not sure why but kinda frustrated so why not
here's the cmd stuff:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsFrost3>ipconfig[code]....
I am trying to connect to my son's wireless internet with my own laptop. I can't get it to connect - I have tried to "renew IP address" and it doesn't work. I also got a message when I went to Start Run, etc etc "no operation can be performed on Wireless network while is has its media disconnected" I am able to connect to my own wireless internet at home on same laptop.
View 1 Replies View RelatedI'm trying to create an Ad-hoc network for use with my Android phone, however the phone does not discover the network.I've browsed various forums and tried a few things, but with no success.My laptop is able to detect other wireless networks. Wired Ethernet connection works fine.ipconfig /all results are below. The broadcom wireless LAN adapter shows Media Disconnected.I'm running Norton Internet Security and HP Wireless Assistant.
View 1 Replies View RelatedNew E3200 router (a few weeks old).
Using the manual settings under Status/Router and clicking the Disconnect button (by Login Status), the page reloads, and say I am disconnected.
Without any input from me, about 30 seconds later the page reloads and say I am connected.
Clicking disconnect, closing the tab and testing my connection proves that I'm not actually being disconnected at all. I cannot force this router to manually disconnect.
Is this a firmware bug or is there another setting else where that prevents me from manually shutting down my connection?
Edit: Firmware 1.0.04 build 1 Apr 10, 2012
I have a E2000 for a half a year now.We have been on hollyday for 5 days so my routers has been shutdown.Today it happend 3 times that my complete LAN disconnected for no reasonI didn't have any wired or wireless connection.
View 5 Replies View RelatedI bought a WAG160N ADSL2+, I configured it and all the computers can connect to it with wireless. But the problem is sometimes the connection between the wireless adapter and the router will disconnect and I'm not able to connect again (the computer screen in de bottom right corner has a red cross in front of it if you know what I mean). It can take hours before it will be able to connect again. The only way to have the connection back up is to turn off/on the WAG160N. This happens mostly on my machine (windows XP Dlink Dwa-131 adapter and with the adapter that came with the WAG160N) and afterwards on the other machines. Its like the router doesn't want me to connect anymore.
View 3 Replies View Related