How To Use Default Connection If VPN Is Disconnected
Sep 18, 2012
I just installed the free vpn client spotflux. The connection works fine, but after I disable the vpn again windows 7 seems to not use my "normal" ethernet connection anymore. I'm pretty sure that it will use that connection if I deinstall spotflux again but how to configure windows to use the normal connection when the vpn is not connected?I've attached a screenshot of the LAN connection settings and the priority list - but still it doesnt seem to work. What am I doing wrong?
View 1 Replies
ADVERTISEMENT
Dec 28, 2012
I had problems connecting to my wireless internet for extended periods of time with my lease expiring almost instantly. Nobody else in my house had trouble connecting, only me. Troubleshooting the connection only showed that the default gateway was not available and failed to allow me to connect despite "fixing" the problem. I attempted the ipconfig/renew, netsh int ip reset reset.log, and netsh winsock reset catalog operations in cmd as an administrator to no avail. Finally, as a last resort, I reset my modem and that finally allowed me to connect although occasionally I would be kicked off the connection and have to restart the modem again. I would still like to know the problem and a possible solution since my friends seem to have a similar problem with their wireless internet.
ipconfig/all before resetting the modem:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersOwner>ipconfig/all
Windows IP Configuration
[code]....
View 5 Replies
View Related
Dec 15, 2012
I am not able to connect my laptop wth router... There is APIPA problem in network.
View 1 Replies
View Related
Feb 11, 2013
Can't connect to the wireless network that is in the next room but I can connect across the street, I keep getting the message that the LAN Media connection is DISCONNECTED on connection 2, the computer trys to RENEW the IP address but can never do it, I have run CMD propmts pconfig/release, ipconfig/renew, ipconfig/all nothing works for my home system yet my laptop is connected my tower is running on the guy across the street.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Celeron(R) CPU 2.93GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 503 Mb
Graphics Card: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller, 64 Mb
Hard Drives: C: Total - 78523 MB, Free - 64075 MB;
Motherboard: ASUSTek Computer INC., Govii
Antivirus: Spy Sweeper with AntiVirus, Updated: Yes, On-Demand Scanner: Disabled
View 1 Replies
View Related
Sep 19, 2012
sometimes the ethernet led is not glowing even if the cable is plugged in. how can i resolve this?
View 1 Replies
View Related
Jul 10, 2012
I have brought a broadband connection from a local ISP called YouBroadband. (I am from India, if you are wondering.) For the first month of my plan, I was having internet connection without any issues. But since 2nd month, I am experiencing a very strange problem. When I turn on my PC and connect to internet by entering my password, I do so without any problem. But after a few mnutes of connectivity, I loose my connection. Even stranger is the fact my Windows 7 Ultimate edition does not recognise this. It still shows connected sign in the notification area. But I am not able browse any more using any browser. to solve the problem, I start network troubleshooting, which in a few seconds shows, resetting 'Local Area Connection 2' and then I am able to log in again. At times this solution also doesn't work. All i can do at that time is shut down my PC, wait a few minutes and restart again. To my extreme dismay, this keeps happening over and over again. I connect, get disconnected, reconnect and again disconnect. This is terribly disturbing and annoying.
I have searched on Google with no success. I tried changing DNS server settings and put Google open DNS address as my preferred DNS server but that didn't solve the problem too.( I received this tip from a friend of mine.) Here's what I get when I type ipconfig/all in Command prompt-Windows IP Configuration[CODE]
View 14 Replies
View Related
Aug 26, 2011
I have a small network, about 35 computers.There is 20 LAN PC computers (they use dns, active directory, dhcp), and there is 10 laptops. They connect on same D-Link wireless router( radius server authentication).After most of laptops is operational(connected on wireless router and on domain ), same two laptops always disconnect, and they can't regain connection . All laptops also get their ip addresses through dhcp.I tried all kind of wireless router configuration, I don't think it is dhcp or dns server problem, remote access policy is also very simple
View 13 Replies
View Related
Sep 5, 2012
Is there any software that will prevent my internet connection from getting disconnected no matter the cause ?
View 5 Replies
View Related
Oct 8, 2011
I have a US Robotics 5462 router and a D-Link DCM-202 cable modem on Comcast. I've had this router for years and initially configured it for wireless access using a Windows XP system (this router requires you to configure it via Ethernet and 192.168.2.1). That computer stopped working last year, so I got a new computer running Windows 7.When I first got this new PC, I could not connect to my router via Ethernet (just like I can't now), but I was still able to connect to the wireless network I had previously set up, so I was satisfied.
A year went by, and last week I was suddenly unable to access my wireless network, so I did a factory reset on the router, erasing my previously configured wireless network and requiring me to connect the router to my computer via Ethernet to reconfigure the router. I tried to do this, but despite all of the correct LEDs being lit on the router, I could not access 192.168.2.1. A little poking around on my control panel revealed that my LAN was being labeled as an "Unidentified Network" and there was "No Internet Access." I tried to make it a private network, but that didn't fix the issue.
I searched around for a while and read some advice to try running ipconfig. When I did that, I saw "Media Disconnected" for my LAN adapter. I've tried a few of the possible solutions already with no luck. With the same computer and the same Ethernet cable directly connected to my modem instead of through the router, I *CAN* get online. That's how I'm connected right now. Also, I have no problem accessing any wi-fi networks.
View 5 Replies
View Related
Jun 29, 2011
I have been searching forums for the last 2 hours and trying to figure out how to make this work. I tried to release/renew and it told me it couldn't and got the media disconnected message. I tried the TCP/IP and Winsock renew and that didn't work either. My internet was working OK and then all the sudden it stopped working. [code]
View 11 Replies
View Related
Apr 12, 2012
I have a laptop - Lenovo E43 in which i tried to connect with wifi, when wireless nework connection is opened, it is showing No wireless networks were found in range. and when IPCONFIGured, Media state...:Media disconnected is displaying under the Ethernet adapter Wireless Network connection.
View 1 Replies
View Related
Nov 21, 2011
I just installed nVidia Nforce drivers for my Asus 750i motherboard, I show I have internet connection, however I can not get windows to pull up a site. TRIED everything reset modem, router, checked all settings. When I pull up the networking system information, it states connection status: disconnected via the Nvdia controll panel. Reset everything back to factory defaults still nothing....IT was working, I intalled I tunes, and then it stopped....I uninstalled Bonjour thinking that it might be the issue....nothing
View 1 Replies
View Related
Jan 25, 2011
I have a 5520 ASA running 8.2(1) and ASDM 6.2(1). The ASA has been running for 223 days without issue. Today it stopped showing real time status on the Device Dashboard from within ASDM. All of the graphs state "Lost connection to Firewall."I try to manually reconnect but it will not. I have tried on a couple different computers and cannot get the monitoring connection to work.It is a very busy firewall and I will have to schedule for a restart (which I was thinking of doing) even though I do not see a memory issue as per snip below. I don't want to restart unless it is the best option.
View 13 Replies
View Related
Dec 10, 2012
Recently our ACS loss connection to AD. Notice following error message (collect from show tech):
Dec 9 00:05:31 OasPrp-Lvl07-ACS01 adclient[24514]: INFO <bg:ageBindings> base.
bind.healing Lost connection to myhqkul990003s.simedarbygroup.com. Running in di
sconnected mode: KDC refused skey: Preauthentication failed
[Code]....
However we manage to restore the connection by reset password of the AD account that used in establish connection between AD and ACS.
View 1 Replies
View Related
Mar 6, 2012
I want to share PC internet (PPPOE connection) on my linksys wireless router (E3000)Problem : When i directly connect internet wire in router, pppoe connection frequently gets disconnected. So what i wanted was to share my pc internet on router.I have two lan card on windows 7 installed PC, 1st lan card is connected to internet cable and i can access internet on pc, second lancard is connected to wireless router. So basically what i want is to share pc internet ( PPPOE ) on wireless router through DHCP connection type.
View 1 Replies
View Related
Jul 3, 2011
I got a hand-me-down laptop the other day. Wireless (WLAN) works fine, but I can not connect via ethernet.
It gives the "Limited or no connectivity" message, even if the ethernet cable is unplugged (no "a cable has been unplugged" message)
The laptop is plugged in to an EWIRE modem/router. Desktop connects fine via ethernet, as does my PlayStation 3 console via wireless. So I don't think it has to do with the modem/router. It's a Compaq from 2005 or so. Windows XP Pro SP3.
System:
Microsoft Windows XP
Media Center Edition
[Code].....
I have a general knowledge of fixing the typical internet connection problem (obtain DNS automatically, repair connection, unplug modem for 20 seconds, etc) but I've never been this stumped before.
View 6 Replies
View Related
Sep 15, 2011
I am using my LAN Connection for file sharing and internet on my Office Pc (Windows XP). I have a wireless external adapter (Alfa) which I use for WAN Connection. But my PC doesn't use the internet from WAN Connection till I disconnect the LAN Cable. I want to use LAN Connection for file sharing and database in the office only and Internet on WAN Connection.
how can I make the WAN Connection as default and to guide the OS to use this while the LAN Cable is still plugged in. I am using AVG Internet Security 2011 & it's firewall.
View 2 Replies
View Related
Jan 22, 2012
My wireless connection keeps dropping. It tells me the default gateway is not available.I have tried to check and do the things told here first but not working have tried to do the driver update . I have a realtek driver, there is no update available for it.I have a 25 mbit connection i barely get 1 mbit.Extremely slow The laptop is running windows 7 .Also i already did all the TCP/IP stack repair options like winsock reset etc.The antivirus i am running is ESET Nod32 version 4 i think .I have attached a xirrus wifi inspector photo if u want to look at it.[CODE]
View 5 Replies
View Related
Aug 24, 2012
the problem is with the wired connection, sometimes I have a good connection and then I will lose the connection to the network and after I run Windows Network Diagnostics it re-establishes the connection and says that the problem is that 'the default gateway is not available'.
View 2 Replies
View Related
Oct 4, 2011
im having a problem with my 2701hgv -e. I connected it to my laptop and I tried to enter the settings of the router but was unable to do so. but when I ran the ipconfig command, there was no default gateway. I tried to press the reset button but nothing happened.
View 4 Replies
View Related
Jan 25, 2012
I have a win 7 netbook that I recently got and for some reason it suddenly cannot keep a connection to the internet. It used to keep a connection before but now I keep getting the error the default gateway is not available about every ten minutes while connected which of course is very frustrating.
I've tried updating all associated drivers but apparently that hasn't changed anything. I've tried restarting the computer and tried different connections. I know its nothing to do with the internet connection I'm trying to connect to as other devices are able to keep a connection with no issue.
View 1 Replies
View Related
Mar 28, 2012
default inactivity connection time out for A3(1.0) So by defult any tcp connection(http or https) will be timed out in an hour. [code]Was this change in the A4(2.0) code or is it still the same? I heard a TAC engg say that default inactivity timeout for http and https are now 5 mins that is 300 seconds.
View 3 Replies
View Related
Aug 28, 2011
I can connect to the internet via wireless just fine, and everything will be hunky-dory for a while. After a while, however (this varies anywhere from a day to a week), there will be a small hiccup on the connection, and then something fails in the Acquiring Network Address stage. My computers will get an IP, but they will not get the default gateway or DNS server.I have tried a plethora of fixes, from simple computer reboots to fiddling with all sorts of settings, and nothing works to reestablish the connection. My father has also tried fixing it, to no avail. I have to go and reset my router, which also interrupts TV service, because it is through AT&T U-Verse. Needless to say, this does not make other people in the household very happy, and I really shouldn't have to be resetting my router every couple of days like that. My PC uses a Netgear WG111v3 adapter and is Windows XP. My laptop has on-board Wifi and is Windows XP Professional.
View 2 Replies
View Related
Mar 31, 2012
'Use Unicasting' is selected by default in the Dynamic IP (DHCP) connection type.I turned it off based upon the router's support text since the router gets an IP address from my cable modem.I don't understand this option at all. I've searched for data on the topic and I can't make sense of it.I think I made the correct selection by un-selecting 'Use Unicasting.'
View 14 Replies
View Related
Jan 6, 2013
I am tring to configure ssh in cisco 4507.After doing so Ican see ssh connection establish from default vlan but getting failed from other vlan.rectify the ssh configuration so that connection estabnlish from any vlan.
View 1 Replies
View Related
Jul 5, 2011
I have a pair of ASA 5550s running Anyconnect Essentials, with multiple connection profiles configured. I would like the login page to the portal to default to our main corporate profile (so the users get NAM and all the policy goodness), but presently it is defaulting to the last profile I created. Is there any way to modify the default connection profile in the drop down list so it always defaults to my preferred profile? It seems like I saw this sometime in the past.
View 2 Replies
View Related
Mar 29, 2012
I've just managed to reset the WRT 300N to default settings and have setup the internet connection etc and home network ... BUT no matter how I've fiddled with the wireless settings I cannot get any of the laptops or mobile phones to connect wireless to the network.The Windows software on the laptops 'finds' the router OK but for some reason the router seems unwilling to supply an IP address.I've checked ALL of the settings that I can think of, and all are correct ... well, all are exactly the same as my old router which worked perfectly.
View 4 Replies
View Related
Jul 16, 2012
I just got a new modem with built in router. and for the first few days i had my internet running pretty perfectly until recently when i just keep getting disconnected from it and then reconnected. i try to troubleshoot; it says that i DONT have a fixed DNS. i am pretty bad at networking.
View 18 Replies
View Related
Aug 20, 2011
My computer keeps getting disconnected from the internet at random times. Every day it happens and resetting my computer works, or waiting about an hour or so. I have a static ipv4, 192.168.1.8 so i can port forward for a game server, and maybe someone else on my network gets the same ip because I don't know how to block people from using the same ip. Linksys router. Not sure what exact but do you need it?
View 10 Replies
View Related
Feb 25, 2013
My wife is using a laptop (wireless) and I am using a custom built PC. We have AT&T DSL I believe its a 6mb connection. Anyways, only sometimes when my wife is surfing the net do we both get disconnected. i have a 2wire Gateway (I thought it was also a modem/router). It doesn't seem to DC us when shes playing like xbox games (windows 8 on the ultrabook)...but when she gets on the internet it does it..but not all the time. I was thinking maybe it was DCing because we were putting to much on the gateway.
Desktop: Using ethernet...custom built PC (previous pc was a HP...same issue)
Ultrabook: HP Envy 4-1115dx (previous laptop was a compaq...same issue)
Gateway: 2Wire 2701 HG-B
View 2 Replies
View Related
Dec 29, 2011
Mine is connected to the router that is in my room, my big brothers pc cannot get a stable connection, when i access the Network and Sharing center, it says Local only and then when i try to repair it goes to local and internet access but then when the troubleshooter finishes it goes back to local only!?
View 1 Replies
View Related
Jan 1, 2013
My dad just had to send his Acer Aspire back to the manufacturer to get the fan replaced. It came back factory reset and would not connect to any internet wired or otherwise. He called me and I asked him to bring it over. I can get it to connect to via Ethernet at my house, however, wireless is a no go. The status bar goes between "no connection available" to showing my network with two bars. When I attempt to connect to my network I get the standard "Window was unable to connect to this network". I currently have another PC, a PS3, a smart phone, and a tablet all connected with no problem (and all at full bars), so I know it's not the router. I ran an ipconfig /all and this is what I got: [code] One thing I did notice is that my IP Routing Enabled was set to NO and when I looked at how to fix that it said to update a registry key.
View 14 Replies
View Related
Jan 27, 2011
I am having problems with my internet connection through my desktop but my laptops are still working. From searching this site it appears to be a media disconnected error. Most of the fixes I have seen have been for laptops but I am having trouble finding fixes for a desktop (ethernet connected). Can somebody attach a link if this has already been coverered (I am sure it has but I just can't find it). I have a Compaq computer running Vista Service Pack 2.
View 15 Replies
View Related
