D-Link DIR-615 :: Diablo 3 Always Get Disconnected From Server?
May 21, 2012While playing on Diablo 3 using DIR-615, it will always get disconnected from server after 2 to 20 minutes. The router firmware version is 7.12.
View 4 RepliesWhile playing on Diablo 3 using DIR-615, it will always get disconnected from server after 2 to 20 minutes. The router firmware version is 7.12.
View 4 RepliesMy roommates and I like to play diablo 3 and wow at the same time, but we experience frequent disconnects. If one of the machines is in the DMZ on the router it doesn't disconnect when the other two do. I've turned the router firewall off and this does nothing to work. Can I just forward all the appropriate ports to ALL of the computers?
Router model: FR-300RTR(rebranded d-link)
Router firmware: DD-WRT c24-sp2
Router firewall: off
UPnP: on
dmz: off
manual port forwarding: off
All machines are running windows 7
via one of my friends having an issue with connecting to a variety of games for more than a few mins:When I join a game after about 5 or so minutes of play I get kicked out of the game and it throws this error "Game disconnected: your connection to the server timed out."If I attempt to re join a server the game then throws this error "Game disconnected: could not join server."The only way to play anoter 5 minutes is to restart my computer.Furthermore I have fios and a bigfoot killer 2100 NIC so pleanty of internet speed and low ping.
specs:
CPU: i7-2600k
GPU:2x GTX480
RAM: 16GB corsair vengence
Bigfoot killer2100 NIC
I having problems to conect to the internet after i install my graphics card.. is a asus radeon hd 5670 512mb all the services are on and the dsl cable is conected properly after that a buy a usb network adapter of 300mbps.i install it detects the modems i enter the securyty key properly 3 minutes later of scanning says that failed to conect t wire456 [name of the modem] the computer uses windows xp service pack 3 when i try it on my windows7 ultimate pc it works all ok i remember that later when i install the video card i uninstall some programs maybe i uninstalll some of the drivers but i dont now wich drivers.
View 3 Replies View RelatedThis has been happening for about the last two weeks now. Before we never had any problems. So now all wireless devices keep on getting disconnected almost daily.
I have a laptop, 2 Iphones, an Xbox 360, and a Xoom Tablet that keep getting disconnected. The Desktop, which is directly connected to the router via a cable is fine and never gets dropped.
I tried changing channels, and wireless mode is now G only. Still keep getting dropped.
The setup:
Time Warner Cable Internet Dynamic IP
DIR-655 A3 Firmware 1.21
3 hard wired, fully updated, virus free, windows xp pro machines
The Issue:When only one PC is running or actively being used there is no issue. However, when there is moderate internet usage on a second pc the internet connection will drop (the WAN light on the router stays on as does the ethernet light on the modem) and give this pair of log entries.
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
I just got a new modem with built in router. and for the first few days i had my internet running pretty perfectly until recently when i just keep getting disconnected from it and then reconnected. i try to troubleshoot; it says that i DONT have a fixed DNS. i am pretty bad at networking.
View 18 Replies View RelatedMy computer keeps getting disconnected from the internet at random times. Every day it happens and resetting my computer works, or waiting about an hour or so. I have a static ipv4, 192.168.1.8 so i can port forward for a game server, and maybe someone else on my network gets the same ip because I don't know how to block people from using the same ip. Linksys router. Not sure what exact but do you need it?
View 10 Replies View RelatedMy wife is using a laptop (wireless) and I am using a custom built PC. We have AT&T DSL I believe its a 6mb connection. Anyways, only sometimes when my wife is surfing the net do we both get disconnected. i have a 2wire Gateway (I thought it was also a modem/router). It doesn't seem to DC us when shes playing like xbox games (windows 8 on the ultrabook)...but when she gets on the internet it does it..but not all the time. I was thinking maybe it was DCing because we were putting to much on the gateway.
Desktop: Using ethernet...custom built PC (previous pc was a HP...same issue)
Ultrabook: HP Envy 4-1115dx (previous laptop was a compaq...same issue)
Gateway: 2Wire 2701 HG-B
Mine is connected to the router that is in my room, my big brothers pc cannot get a stable connection, when i access the Network and Sharing center, it says Local only and then when i try to repair it goes to local and internet access but then when the troubleshooter finishes it goes back to local only!?
View 1 Replies View RelatedI run a web server behind a D-Link DIR-655 (Rev B). I have port 80 opened and forwarded to my servers IP and a domain pointed at my external IP. I can access the server without issue using the domain or external IP from outside of my network, but I can only access it via the internal IP from inside my network. Using the domain or the external IP just gives me a timeout error. I had a Linksys router previously and didn't face this issue.
View 3 Replies View RelatedI get the message "dns server isn't responding" several times per day. If i get the message, nothing can get through to the internet (smartphones, laptop, vita, friends smartphones, etc.) If i reset the router, i can access the web again. Or if i wait for 2 minutes.
This is my setup:
Cable modem connects to D-link 615. Laptop is connected with a cable in D-link 615. All my wireless stuff is connected via wireless D-link 615. My cable modem is also connected directly to my ps3. I'm running windows 7 on my laptop.
I'm running a Mac OS X Server on my network. I'd like to use the Server's DNS instead of my ISP's. In the D-Link Router I've set the DNS to the OSX server in the WAN section. Unfortunately it doesn't allow my clients on the network to connect to the internet when I do this.
If I set the DNS on the client to the OS X server it works fine. Or if I set the DNS on the router to my ISP's (or Google's) it works fine too.
Is this a route configuration issue? (And if so, what can I do to fix it?) Or is this an OS X Server issue?
My dad just had to send his Acer Aspire back to the manufacturer to get the fan replaced. It came back factory reset and would not connect to any internet wired or otherwise. He called me and I asked him to bring it over. I can get it to connect to via Ethernet at my house, however, wireless is a no go. The status bar goes between "no connection available" to showing my network with two bars. When I attempt to connect to my network I get the standard "Window was unable to connect to this network". I currently have another PC, a PS3, a smart phone, and a tablet all connected with no problem (and all at full bars), so I know it's not the router. I ran an ipconfig /all and this is what I got: [code] One thing I did notice is that my IP Routing Enabled was set to NO and when I looked at how to fix that it said to update a registry key.
View 14 Replies View RelatedI am having problems with my internet connection through my desktop but my laptops are still working. From searching this site it appears to be a media disconnected error. Most of the fixes I have seen have been for laptops but I am having trouble finding fixes for a desktop (ethernet connected). Can somebody attach a link if this has already been coverered (I am sure it has but I just can't find it). I have a Compaq computer running Vista Service Pack 2.
View 15 Replies View RelatedI have a logitec LAN-WH300ANDGR(not logitech) wireless router, it's been working fine for months. Yesterday I enabled port forwarding, but after that I kept getting disconnected from the internet.I updated the router, but no joy.So I disabled port forwarding but I still get disconnected and now I cannot access my router's webpage [URL] the page will not load.
View 1 Replies View RelatedI was able to connect smoothly to any preferred connections in my area including my own. But now, it doesn't let me connect wirelessly to any of them. Now I typed ipconfig and this is what showed up.
Ethernet adapter Wireless Network Connection:
[code]...
I have just upgraded a laptop to vista, I didn't have any internet connection until I used a dongle to connect, after connection, it downloaded drivers to computer. Wireless now works without the dongle. I have no wired connection as it says "Media Disconnected." If I look in device manager, everything is working fine. I have looked on the net & tried a lot of checking various things but still no connection on lan. This is on an old laptop a advent 7109A. It was working fine on all connections until I upgraded.
View 19 Replies View RelatedI got a new router, a Cisco Linksys EA3500, and everything works fine and no one else in my family notices anything wrong. Everything works and I don't have trouble accessing the internet, but whenever I play a game online it will disconnect me after a while. Sometimes it disconnects me after 5 minutes and sometimes after 30 minutes. I have this problem with every game I play, except for Runescape. The weird thing is that I talk to friends on steam when we are playing and it doesn't get disconnected I can hear them fine, and my internet access bar at the lower right doesn't say I'm disconnected.Streaming and downloading work as well.I tried to port forward and I assumed it would work but I still had the same disconnection problem. I tried to port forward again but this time I used the tool at portforward.com to check if they were forwarded properly and it said your port is not open or not reachable. I tried this with a lot of random ports and it said the same thing.
View 16 Replies View RelatedI have tried everything, port forwarding, switching wires, and resetting my router. NOTHING WORKS! I get disconnected every 15 minutes and i can even send messages to people.
View 1 Replies View RelatedI have been having issues with my wifi for the past one week, I earlier had a NETGEAR router which was 2 years old and keeps getting disconnected. I thought it could be a router problem and bought myself an edimax couple of days ago. This one is much worse, it keeps getting disconnected very 20 mins. I have an iMac, alienwareX51, think pad Lenovo, iPad, iPhone, ps3 and BB.
View 14 Replies View RelatedI randomly get disconnected from the online applications that I'm using.(Msn, skype, online games, etc.)And I'm running this program in the background to check what's going on.As you can see, everything is normal till I get 0 ping for a couple of times, then it immediately goes back to normal till it hits 0 ping again.It's very random, it happens on the 345th hop or 789th etc.I'm on a wi-fi connection but not using wireless modem.The cable's plugged to my computer.
View 14 Replies View Relatedmy internet modem dc quite often i mean sometimes its 1 or 2 hours sometimes its not, so we are planning to switch the modem soon, but before that i found out something strange, its like in order for us to reconnect back to internet we have to reset the modem, heres the thing. after reset, my brother's pc will immediately connects back to teh internet, but mine pc wouldnt, i meanmy skype will work i can tlk to my friends on it and such, but i have to wait for like 5 mins or so to resume back to the net on firefox/ other internet dependent program, just not skype though.
View 1 Replies View Relatedwhen i open up my network connections tab, i see two icons: "Wireless network Connection" and "Local Area Connection"
It clearly says a cable is unplugged, but no cable is unplugged and i am 100% sure of that.
when i type "ipconfig" into command prompt, i see all these things that say "tunnel adapter Local area connection" and it says media disconnected.
how would i go about "Connecting" the media? i am concerned about this issue so much because, even though i can connect to the internet (ip:192.168.1.1) i cannot connect to my printer (ip:192.168.1.4) and when i tracert the printers ip it says "media disconnected" so i know the two errors correlate to one another.
I just installed the free vpn client spotflux. The connection works fine, but after I disable the vpn again windows 7 seems to not use my "normal" ethernet connection anymore. I'm pretty sure that it will use that connection if I deinstall spotflux again but how to configure windows to use the normal connection when the vpn is not connected?I've attached a screenshot of the LAN connection settings and the priority list - but still it doesnt seem to work. What am I doing wrong?
View 1 Replies View RelatedI am not able to connect my laptop wth router... There is APIPA problem in network.
View 1 Replies View RelatedCan't connect to the wireless network that is in the next room but I can connect across the street, I keep getting the message that the LAN Media connection is DISCONNECTED on connection 2, the computer trys to RENEW the IP address but can never do it, I have run CMD propmts pconfig/release, ipconfig/renew, ipconfig/all nothing works for my home system yet my laptop is connected my tower is running on the guy across the street.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Celeron(R) CPU 2.93GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 503 Mb
Graphics Card: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller, 64 Mb
Hard Drives: C: Total - 78523 MB, Free - 64075 MB;
Motherboard: ASUSTek Computer INC., Govii
Antivirus: Spy Sweeper with AntiVirus, Updated: Yes, On-Demand Scanner: Disabled
sometimes the ethernet led is not glowing even if the cable is plugged in. how can i resolve this?
View 1 Replies View RelatedI am looking to the best way to add a link to our File server on our network. We have a win 2008 r2 server set up to share a directory for network storage. The storage server has a static IP and the way we access it now it so go to RUN and input "//servername" and it pops up the directory in Win Explorer. This has worked fine but now we are building an Intranet and I need a way to link the Data Storage on the Intranet site.
View 1 Replies View RelatedOn my server I host several websites.Last Monday we got our FttH-connection and I'd set up my D-Link DIR 655 to manage our server and other computers.In the webconfig of my router I set up the Virtual Server for several applications (Telnet - 23, HTTP - 80, HTTPS - 443, FTP - 21, SMTP - 25, POP3 - 110, IMAP - 143 and also ports 20, 22 en 81) redirected to my server's IP address.For these items the private port and the public port of each item is the same port number; the protocol is TCP for these items. I didn't change the options Schedule ("Always") and Inbound Filter ("Allow All").
The DNS of my domains (samendienen.nl and some other domains) is set to my new IP-address.May be I forgot some other settings in my D-Link-router.what I have to do to make my websites reachable?
Up to this point, all the computers on the network accessed the e-mail server via the Windows name of the PC running the e-mail server. However, one of the PCs will need to access e-mail from the WAN soon as opposed to the LAN, so I switched the server name in Thunderbird (e-mail client) to the actually fully qualified domain name of the server (registered at NO-IP, which redirects to the e-mail server at home).
The problem I am running into is that all the requests sent for IMAP or SMTP are being blocked by the router. That's even though I added port forwarding rules for them. The logs show messages similar to the following:
"Blocked incoming TCP connection request from 216.168.101.68:51291 to 216.168.101.68:143"
It doesn't make a difference if I change the endpoint filtering to "Endpoint Independent" either. Any thoughts of what else I can try? DMZ is not an option.
I have a DIR-601 and I'm trying to play the IOQuake3 game Urban Terror (UT). Every time I try to get a list of servers the DIR-601 stops and reboots.What is that? Flood protection? Something else?
View 4 Replies View Related