D-Link DIR-601 :: UT Server Search Causes Reboot?

May 4, 2010

I have a DIR-601 and I'm trying to play the IOQuake3 game Urban Terror (UT). Every time I try to get a list of servers the DIR-601 stops and reboots.What is that? Flood protection? Something else?

View 4 Replies


ADVERTISEMENT

Cisco Routers :: RVS4000 Distribute A Search Domain In Addition To IP Address / DNS Server Information

Feb 29, 2012

I have just installed and configured a new RVS4000 with VPN (currently running firmware V2.0.0.3), and have enabled the DHCP Server service. I wanted to be able to distribute a search domain in addition to the IP address and DNS Server information (as I have done with other devices that include a DHCP Server), but cannot seem to locate where or how I might do that with the RVS4000.

View 4 Replies View Related

D-Link DIR-601 :: 404 Page And Misspelled Url Search Redirects

Mar 4, 2013

Purchased a dlink DIR-601, hardware version B1, currently updated to firmware 2.01NA, internet connection works fine, but any time I visit a page that has 404'd I get redirected to [URL] any misspelled url brings me to url...I can't find options anywhere in the config to turn this feature off, it's annoying and intrusive.

I never saw any type of redirection with the old netgear router I replaced, I've tried turning off advanced DNS, no luck. Seems to me it's a feature built into the router, and so, how do I disable it?

View 3 Replies View Related

D-Link DIR-825 :: 2.05NA Doesn't Work With Any Easy Search Utility

Jul 10, 2011

I tried to upgrade to 2.05NA several times and there always ends up being an issue that support is too sad to give the correct answer to and just puts a consumer thru "jumping thru hoops" and getting nowhere.2.05NA (actually started with 2.03NA) first caused a problem with limiting my upload speed to 1024mb. I happened across the fix on another forum and tried it and it worked. It was the default QoS setting D-Link changed after version 2.02NA and refuses to release a new firmware to fix this for everyone. Why they don't release a new FW that fixes the issue but keeps things promised on the package working is beyond me.  Now, I purchased a D-Link DNS-323 and I finally got drives to fill it some time back. If 2.05NA is loaded, the Easy Search Utility will not connect to the NAS. I have tried the version the NAS came with AND the latest version offered. It will see the NAS upon 1st launch of the latest Easy Search Utility, but it will not connect and then it disappears if you relaunch the utility and won't return until a reboot. Bottom Line: it will not connect with 2.05NA loaded. It works fine with 2.02NA.

What is the setting that D-Link has screwed over here also that is causing this problem? It is pretty sad that their own hardware items won't play well together unless you run old FW. What setting D-Link changed that is making the D-Link DIR-825 not connect to the D-Link DNS-323 NAS when the DIR-825 has 2.05NA loaded. I have a DIR-825 Rev. B1 and a DNS-323 NAS with its latest firmware. I am using 2.02NA on the router since that is the only one that works and is the latest stable release(other than the DHCP reserve issue), no matter what D-Link wants to try to make people think. I won't try their support since they NEVER did give me the fix for the QoS upload issue and when I asked them to put it as a sticky in this forum when I found the answer somewhere else....well, there is no sticky as we all know. I would like to be able to have the DHCP Reserve issue working too, but I would like to connect to my NAS more at this point.

View 6 Replies View Related

Windows XP Server Service Goes Away After Reboot

Dec 7, 2011

I am running Windows XP. The machine used to be on a Domain, but I took it off. Now, when I reboot the machine, the Server service is gone, and I have to get it back buy Uninstalling then Reinstalling Microsoft File and Printer Sharing in the internet connections dialog. Is there some security policy or something that prevent the Server service from running at boot?

View 7 Replies View Related

Client Loses Network Connection With Server After Reboot

Mar 28, 2011

I have a problem with a client/server app: It is a web application that resides in C:inetpubwwwroot (aspx pages) of the server. The client is a Windows app that is installed into Program Files on the clients and when running receives commands from a webservice on the server. When I install it on a PC on our own test environment it communicates with the server perfectly, no matter how many times I re-boot the client, the connection never goes down. When I give the client to someone on a separate domain, they install it and everything is OK. However, once they reboot the PC (Windows XP) the connection to the server fails. The can still ping the server from the PC, they can even see the web service is up and running by typing into a browser but the connection now fails. If I get them to uninstall the client all and re-install, it is fine again. As I say, it is a reboot that breaks it (communication to the web service that is.) My problem is that I am completley blind to the setup on the client-side of those I give it to (I only email it to them, I have only been in the site once). The PC is obviously on a domain (with static ip addresses I assume) but other than that i know nothing. I think it is something similar to the way when you map a drive in Windows and then when you reboot it has lost the connection and you have to re-map it.

View 6 Replies View Related

D-Link DIR-615 :: How To Reboot Router Using A Script

Jan 31, 2010

is there a way how to reboot DIR 615 using some kind of script?From time to time I need to reboot the router

I also have Dlink DNS 323 and somebody discovered a way how to shutdown it down using Wget:

[code]...

View 1 Replies View Related

D-Link DIR-655 :: Schedule A Weekly Reboot With Router?

Sep 10, 2012

Can I schedule a weekly reboot with this router?

View 3 Replies View Related

D-Link DIR-615 :: After Reboot Password Doesn't Work?

Nov 21, 2012

i have a DIR-615 Rev C1, firmware 3.13.

After a reboot my password doesn't work anymore (wich is normal I guess) and  all default passwords dont either. Such as ''Password'' or ''Admin''.

View 1 Replies View Related

D-Link DIR-825 :: Doesn't Recognize IP Address Until Reboot

Jan 22, 2013

I have multiple computers on my network as well as cell phones logging in as wifi. At least once a day I have trouble or another computer has trouble getting on line through my network. I have to unplug my router and replug. Its as if it doesn't recognize the ip address until reboot.

View 1 Replies View Related

Tp-link Router Needs Second Reboot After Disconnecting From Electric Supply?

Aug 21, 2011

I recently installed a tp-link router everthing works ok. The problem is when I turn off my pc and disconnect it and all attached devices (modem, router ect) from the electric supply. When I turn it back on I have no internet connection until I reboot the pc a second time.This problem only occurs when I disconnect the router from the electric supply. If I just shut down without disconnecting then I can turn it on and it connects to the internet without any problem.

View 5 Replies View Related

D-Link DIR-655 :: Starts Infinite Reboot When Wireless Enabled

May 23, 2012

I just recently setup a network in my home and selected the D-Link DIR-655 router to manage traffic. It's not clear to me when this issue first appeared as I've been away so apologies for not having a proper timeline.The router is setup in it's default configuration with only the IP Address being changed due to a conflict with my DSL modem. I don't have any experience with routers and it seemed to be working fine so I didn't mess with it.However, the router goes into what appears to be an endless series of reboots making it completely unusable. This can occur anywhere from immediately upon a cold start power to a few hours into it.I suspected a defective router and since I had been traveling the warranty was of no use so I purchased a brand new router last week which is also a DIR-655. The new router is doing exactly the same thing as the original one.

If I disable the wireless functionality both routers perform flawlessly for extended periods (many days/weeks). As soon as I enable wireless what appears to be warm start reboots begin as mentioned anywhere from immediately to a few hours along.Since I am new to networking in general and routers in particular I thought perhaps am I doing something wrong and hence my post here.The f/w in the new router is 204NA. I don't recall the f/w release of the initial router but I  did update it within the last month to whatever was the most current from D-Link. If it's important to know the f/w release of the initial router I will find it for you.

Two (2) DIR 655 routers appear to enter a state of perpetual warm start reboots whenever wireless functionality is enabled. This begins anywhere from immediately to a few hours after a router cold start.Disabling the wireless functionality completely stabilizes both routers.

View 8 Replies View Related

D-Link DIR-601 :: Router Reboot When Playing Online Games

Sep 29, 2011

I just installed two FPS games.. My router reboot every time those game search for servers list. ( So i can't actually play those games) I have a dir-601 n-150 dlink router. I have successfully played online with another connection. I tried opening some ports, but it didn't work. The firmware is up to date.

View 5 Replies View Related

D-Link DIR-655 :: Scheduled Enabling Of Wireless Seems To Reboot Router

Mar 1, 2012

A few weeks ago I noticed that at 9:00am sharp every morning my internet access dropped, and would come back up four minutes later.

The router is connected to a DSL-526B in bridge mode. My first thought was that the modem was playing up, so I factory reset it and reconfigured it.

I checked my ACLS and didn't see any rules that started or ended at 9:00 am so I just lived with it for a week or so until it got so annoying I contacted my ISP to see if they were resetting anything at 9am.

By accident, I saw that my wireless radio was being enabled aat 9:00am, as it had been for the last 2 years, when I first bought the router. But this problem has only started a few weeks ago.

So I changed the wireless schedule to see if that was really the cause for the reset, and sure enough, whatever time I changed the wireless schedule to, the router rebooted at that time.

I've also factory reset the router; twice; the first time I saved/restored my configuration, the second time I recreated all configuration from scratch.

why enabling the wireless radio resets the router, and why disabling it doesn't, and how to correct this behaviour?

View 14 Replies View Related

D-Link DCS Network Camera :: Schedule A Reboot Of DCS2102?

Oct 17, 2010

Any way to schedule a reboot of a DCS2102?I've got 3 of them here, and they are very good but every now and then they seem to stop writing to the storage.  They haven't frozen cause I can still connect to them via a browser

View 2 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3420 - Need To Reboot Multiple Times A Day?

Jan 5, 2013

Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : Ownit

I am having problems with my TL-MR3420 router, it disconnects WIFI all the time. This occur several times a day and is very annoying.

I have quite recently upgraded to the latest firmware but the problem seem not to have been resolved. It also seem that it is mostly the WIFI service that is the problem. The usage of wired routing is working even when the WIFI is disabled.

View 3 Replies View Related

D-Link DIR-615 :: Reset And Reboot - Lost Security Settings

Jan 8, 2012

I had to reset and reboot. I entered the router ISP and went through the 4 step process then rebooted.

My question/problem is now the router is wide open. How do I find page where I can enable the security settings and lock down the router to the outside world?

View 3 Replies View Related

D-Link DCS Network Camera :: 920 - Crashes / Requires Reboot

Aug 3, 2009

Have 13 DCS-920 Every few days a few random cameras will will hang/become unresponsive at random intervals.  The cameras require that I unplug the cameras before they will respond. When the cameras are unresponsive I cannot access the camera via a web browser, the D-View Cam software, or the setup wizard. This is a problem as they are all mounted in positions requiring a ladder to access.

I have some connected via 802.11g and other hard wired over 10/100 cat-6 Ethernet cable.

View 14 Replies View Related

Cisco Switches :: Linksys SPS208 After Reboot Don't See The Link

Mar 10, 2012

I have a problem with switches SPS208G2. They're conected with SFP module after Linksys SPS224G4 and another swithes. After reboot switches which are conected with SPS208G2 don't see link. However previous switches phisical link status is up show LED, but protocol status is down show command "show interface status". I changed Firmware, it doesn't work, i changed SFP module it doesn't work. Yesterday i got new Firmware ls_sps2xx_bx-10600.ros but no luck. I don't understand what's wrong with switches SPS208G2. I have 500 or 700 switches SPS208G2. They installed different places at city. They don't ping until reboot their or previous switches. Reboot previous switches usually doesn't work, works only physical  reboot or pulling SFP module.

View 1 Replies View Related

D-Link DIR-615 :: Constantly Need To Reboot Router - Losing Internet Connection

Feb 6, 2012

I have 2 computers connected to the router (via cable). The problem is that have to reboot the router several times per day because one or both computers lose their internet connection. This happens regardless if one or two computers are turned on.

Router: DIR-615
Firmware version 4.00
Hardware version: D1
Computer1: Win7 64
Computer2: Win Vista 64

View 15 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3020 - Random SSID After Reboot / Restart?

Apr 1, 2013

Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : HNS/Instanet (Cable Internet)

I am using the Router in 3G/4G mode, with WAN only (PPPOE) enabled. I have set a personal SSID in the Wireless > Wireless Settings > Wireless Network Name field.

I do not see the particular SSID on my computer, instead on every reboot / restart of the device a random SSID is generated. see attached screenshot. I can connect and everything works well, but I have to enter the WPA key after each reboot.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - How To Reboot The Router On Schedule

May 6, 2013

Region : Netherlands
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP :

I have a flaky internet connection, and it drops every few days. I've thus far powercycled my router by unplugging and plugging it back in, which fixes the issue.

I'm traveling soon, and would like to be able to have access to my stuff remotely, even after the connection drops.

I have two ideas:Run a script in Windows 7 which would soft reboot the modem - free, not sure if soft reboot is enough though. If that doesn't work, Get a hardware which would powercycle the router - haven't researched if these are readily available and cheap

Is there a way to schedule a soft reboot of my router using Windows system tools? I'd schedule it to reboot every night.

View 9 Replies View Related

D-Link DCS Network Camera :: DCS-5300 Cameras Will Randomly Reboot

Jun 20, 2011

Have several DCS-5300 cameras (firmware 1.06) and randomly the cameras will reboot.

D-Link says to set to factory default, but that is not physically possible.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: Have To Reboot WDR4300 Router Daily To Keep Vonage

Feb 28, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
ISP : Comcast
TP-LINK WDR4300 750N Dual-Band router issue.

I started having a problem with a VONAGE V-Portal VoIP adapter losing connection to the Vonage server. I Unplugging the adapter and waiting doesn't solve the problem. The only way I can temporarily fix the issue is to reboot my TP-Link router. Once the router is rebooted the adapter can connect to Vonage. After a few hours it loses connection again. I have set the adapter to use a static IP outside of the DHCP reserved pool. This didn't fix the issue.

I have had vonage for many years and this router for the last 10 months and not had a problem until the past two weeks. Nothing only my local network changed. All of my PC's have no problems with internet access during the time that the Vonage adapter gets an Error 004 (lost connectivity). I still have connectivity with my ipod touch and other internet enabled devices as well. I was using 8.8.8.8 as my DNS server in the router DHCP configuration as well as the static value when I tried using a static IP with the V-Portal. I then switched all system to the ISP (Comcast) preferred DNS servers. The problem still exists. The only way to get the Vonage adapter back to running is to reboot the router.

I should mention I have Motorola Cable modem to a TP-LINK WDR4300 750N Dual-Band router. I have two Vonage vportal adapters plugged into the a couple of the LAN ports on the TP-LINK router. One vportal is my roommates, one is mine. Everything has been working fine for the last 6 months and now one or the other Vportal loses communication through the router, but the other vportal doesn't lose connectivity. It only happens to one of them and it varies as to which one will ERROR out.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: WDR 3600 - Connection Drops / Reboot Required

Feb 2, 2013

Region : Germany
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 120820
ISP : German university ISP

I have a big problem with several TP-Link routers (WDR3600, WR1043ND, WR741ND), always with the latest firmware and also with older ones. After a day or so, my internet & network connection will drop all of a sudden and all the routers need a reboot. There is no indication on what provoces these lock-ups. The routers can handle heavy traffic (bittorrent /w 100s of connections) but will stop working when browsing casually. The web-GUI will become unreachable. No pings to the outside are possible anymore, not even to direct IPs (8.8.8.8 for example). No pings to devices in the same network are possible either.

View 7 Replies View Related

Cisco Wireless :: WLC 5508 Reboot Cause Switch Port Link Flap Error Disable

May 29, 2013

After reboot WLC , the switch port was err-disable , the cause is link flap after we reboot 3 times , the switch port link flap err-disable every time? We don't know why the WLC rebboot will cause it , it just normal action on device the WLC version is 7.4.100.0 link switch with access port , no port channel , no portfast.

View 11 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR3600 - Binding Settings Can't Apply Automatically After Router Reboot

Mar 17, 2013

Region : Germany
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :

all my systems are configured under "IP & MAC Binding". Binding is activated globally and all check marks for every ID are set. After i finished my configurations, the "ARP List" status shows, that everything is bound - so far everything is great. The problem appears after a router reboot or after shutting the router down and powering it on again. The "ARP List" then shows only a few of my IDs and their status is unbound. I need to go back to the "Binding Settings" and hit "Save" - after that all my IDs appear in the ARP-List and everything is OK again.

View 3 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR7500 11AC 1500 - Unable To Connect Without A Router Reboot

Apr 16, 2013

Region : UnitedStates
Model : TL-WDR4900
Hardware Version : Not Clear
Firmware Version : 3.13.29 B 130126 R 50426n
ISP : Comcast

1. Any device which is switched off (WiFi turned off) wont be able to connect again without a router reboot. I get a connection timeout error when trying to connect. Happens only when there are more than 3 devices connected. (all my devices are ARP linked to MAC addresses with fixed IP addresses - I thought this would eleminate the problem but not)

2. Streaming videos stop playing after 5 minutes. I have to click on the play button to start the stream again. When I test the internet speed through speedtest.net or speedtest.comcast.net, I get over 40MBPS consistently.

3. The router doesnt recogonize 3TB or above HDDs on either ports

4. As long as all devices connect to one channel (either 5G or 2.4G), the connectivity speed is excellent. The moment a device connects to the other channel, the connection speed fluctuates a lot on both.

View 4 Replies View Related

Google Search Getting Redirected?

Oct 7, 2011

Unsure if this is the correct forum but here goes.....I just installed the Google Chrome and after doing so it has been a hair pulling problem so to say. Now when I do a search with google almost every time it looks like the information site listed I click on it and am redirected to another search and if I try to go back to google search it will not let me off the page. I end up having to close that window and open a new window and research again on google. I open my old internet explorer and the same thing happens there now.

View 2 Replies View Related

How To Search Wifi Password

May 9, 2012

My network name is AKY and I lost my password.

View 1 Replies View Related

How To Search Hidden Ssid

May 4, 2011

I want to search hidden ssid names means non broadcast ssid.

View 2 Replies View Related

Windows 7 - Search Engines Not Working?

Dec 30, 2012

I have windows 7. Search engines worked fine when first used, now all I get are errors, With IE9 and Firefox.

View 1 Replies View Related

Cisco :: Search Interface By Description?

May 23, 2012

We have a lot of 6913's handling our office ports and I'd like to know a simple way to find multiple ports knowing their description.

I'm use to Juniper so if I were looking for the 8 ports for the office's 3190-3199 I would type something similar to:

show | display set | match 319

I know I can use | include with a show run on Cisco but that won't pull the interface just the description.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved