TP-Link Dual-Band Wireless :: WDR 3600 - Connection Drops / Reboot Required

Feb 2, 2013

Region : Germany
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 120820
ISP : German university ISP

I have a big problem with several TP-Link routers (WDR3600, WR1043ND, WR741ND), always with the latest firmware and also with older ones. After a day or so, my internet & network connection will drop all of a sudden and all the routers need a reboot. There is no indication on what provoces these lock-ups. The routers can handle heavy traffic (bittorrent /w 100s of connections) but will stop working when browsing casually. The web-GUI will become unreachable. No pings to the outside are possible anymore, not even to direct IPs (8.8.8.8 for example). No pings to devices in the same network are possible either.

View 7 Replies


ADVERTISEMENT

TP-Link Dual-Band Wireless :: TL-WDR 3600 Firmware Upgrade?

Apr 14, 2013

Region : Canada
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP :

I'm wondering if I can install this version of the firmware: TL-WDR3600_V1_130320

It says: Notes: For TL-WDR3600(UN) V1 What is that (UN) version exactly ?

View 5 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR3600 - Add Password For HD Connected To 3600

May 13, 2013

Region : Ireland
Model : TL-WDR3600
Hardware Version : Not Clear
Firmware Version :
ISP : UPC

how do you add a password for anyone trying to access the hard drive that I have connected to the 3600 via usb. I have guests staying in the house on a regular basis and only want to allow family member to be able to access the hard drive that I have connected to the router.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: Port Forward Through TD-8817 Modem > TL-WDR-3600 Router > PC?

Mar 13, 2013

Region : Ireland
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Smart

I have

A TP-Link TD-8817 Modem with IP Address 192.168.1.1
A TP-Link TL-WDR-3600 Router with IP Address 192.168.0.1
A PC with IP Address 192.168.0.100

I figured out that I can only enter an IP Address with the range 192.168.1.* when port forwarding on the modem, ie I cant enter 192.168.0.100 for the PC.Is there any way of Port Forwarding to the PC?

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR3600 - NAT Loopback Confirmation Required?

Mar 7, 2013

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : not clear
Firmware Version :
ISP : BT

I am thinking of buying a TL-WDR3600, but just need to know the answer to the question below.Can anyone confirm if the TL-WDR3600 supports NAT Loopback functionality?

View 3 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4320 - English Firmware Required

Jan 29, 2013

Region : India
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4320 router
ISP :

Just buy TL-WDR4320 router but its in Chinese language can somebody provide my English Firmware so that i can use this product.

View 3 Replies View Related

TP-Link Dual-Band Wireless :: Have To Reboot WDR4300 Router Daily To Keep Vonage

Feb 28, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
ISP : Comcast
TP-LINK WDR4300 750N Dual-Band router issue.

I started having a problem with a VONAGE V-Portal VoIP adapter losing connection to the Vonage server. I Unplugging the adapter and waiting doesn't solve the problem. The only way I can temporarily fix the issue is to reboot my TP-Link router. Once the router is rebooted the adapter can connect to Vonage. After a few hours it loses connection again. I have set the adapter to use a static IP outside of the DHCP reserved pool. This didn't fix the issue.

I have had vonage for many years and this router for the last 10 months and not had a problem until the past two weeks. Nothing only my local network changed. All of my PC's have no problems with internet access during the time that the Vonage adapter gets an Error 004 (lost connectivity). I still have connectivity with my ipod touch and other internet enabled devices as well. I was using 8.8.8.8 as my DNS server in the router DHCP configuration as well as the static value when I tried using a static IP with the V-Portal. I then switched all system to the ISP (Comcast) preferred DNS servers. The problem still exists. The only way to get the Vonage adapter back to running is to reboot the router.

I should mention I have Motorola Cable modem to a TP-LINK WDR4300 750N Dual-Band router. I have two Vonage vportal adapters plugged into the a couple of the LAN ports on the TP-LINK router. One vportal is my roommates, one is mine. Everything has been working fine for the last 6 months and now one or the other Vportal loses communication through the router, but the other vportal doesn't lose connectivity. It only happens to one of them and it varies as to which one will ERROR out.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR3600 - Binding Settings Can't Apply Automatically After Router Reboot

Mar 17, 2013

Region : Germany
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :

all my systems are configured under "IP & MAC Binding". Binding is activated globally and all check marks for every ID are set. After i finished my configurations, the "ARP List" status shows, that everything is bound - so far everything is great. The problem appears after a router reboot or after shutting the router down and powering it on again. The "ARP List" then shows only a few of my IDs and their status is unbound. I need to go back to the "Binding Settings" and hit "Save" - after that all my IDs appear in the ARP-List and everything is OK again.

View 3 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR7500 11AC 1500 - Unable To Connect Without A Router Reboot

Apr 16, 2013

Region : UnitedStates
Model : TL-WDR4900
Hardware Version : Not Clear
Firmware Version : 3.13.29 B 130126 R 50426n
ISP : Comcast

1. Any device which is switched off (WiFi turned off) wont be able to connect again without a router reboot. I get a connection timeout error when trying to connect. Happens only when there are more than 3 devices connected. (all my devices are ARP linked to MAC addresses with fixed IP addresses - I thought this would eleminate the problem but not)

2. Streaming videos stop playing after 5 minutes. I have to click on the play button to start the stream again. When I test the internet speed through speedtest.net or speedtest.comcast.net, I get over 40MBPS consistently.

3. The router doesnt recogonize 3TB or above HDDs on either ports

4. As long as all devices connect to one channel (either 5G or 2.4G), the connectivity speed is excellent. The moment a device connects to the other channel, the connection speed fluctuates a lot on both.

View 4 Replies View Related

TP-Link Dual-Band Wireless :: WR2543ND Keeps Dropping Connection

Feb 6, 2013

Region : UnitedKingdom
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : v1
ISP : plusnet

I have a WR2543ND router and everyday it drops the wireless connection . all the lights on the router stay on and im still connected to the router but it looses the internet connection . the windows trouble shooter says that it cannot connect to the dns server , I have to reset the router and my computer to get it working again . I Have updated the firmware but still the same

View 10 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 Loses 2.4 Ghz Connection

Dec 10, 2012

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : Comcast

The 5 ghz connects fine for multiple machines however machines on 2.4 simultaneously lose their connection to the internet, sometimes saying it is still connected to the internet when it is not and sometimes losing connection with the router entirely. The 5ghz still works when this happens.

View 14 Replies View Related

Tp-link Dual-band Wireless :: Unable To Connection To Tl-wr2543nd Wifi

Nov 9, 2012

Region : Canada
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.17 Build 120509 Rel.33890n
ISP : shaw

my lenovo 510 running windows 7 has the wirelss router listed in the wireless netowrk connection list but cannot connect to the router. it can connect to other routers without any problem.

View 4 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - PPPOE Connected But No Connection

Jan 9, 2013

Region : Iraq
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : LATEST VERSION UPGRADED
ISP : Newroz Telecom

I purchased TP-link, i want to connect with ADSL modem, i connected successfully through pppoe it shows every ip through lan and wan connected, but it doesn't receive packets / bytes from internet, this is the first problem.the second problem is: i use UPS with TP-Link sometimes my electric power is low just with this tp-link it has problem and refreshing the tp-link

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 / Unable To Have Internet Connection

Jan 23, 2013

Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 121106
ISP : unifi

i just bought this router and upgraded the firmware. but i cant seem to get Internet connection up and running. it says connected but its not. tried both 121106 and 121226 firmware, still the same. when i checked the connection it says DNS server not responding.

View 7 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Always Disconnect Connection / Prompt-up Limited Access

Nov 21, 2012

Region : Singapore
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : starhub

1) Always auto disconnect (limited access),

2) My smart phone Motorola MB860 (android 4.0.4) Can connect but can access internet.

3)Always connect to 2.4GHz ,never see connect to 5GHz.

4)Wireless connection 15-20 Max Mbps Only ,LAN can up to 50 Mbps .

View 9 Replies View Related

Tp-link Dual-band Wireless :: Tl-wdr4900 Unstable Wifi Connection As Well As Bittorrent / P2p Transfers

Apr 26, 2013

Region : Hongkong
Model : TL-WDR4900
Hardware Version : V1
Firmware Version : 3.14.3 Build 130320 Rel.39025n
ISP : PCCW Netvigator

I have upgraded to the latest firmware which solved lots of problems regarding unstable wifi connection as well as BitTorrent / P2P transfers.But I also observed that when my BT is on (Transmission for Mac) at around 50KB/s upload and download, my network latency hikes up from some 30ms to 500ms which affects a lot on web browsing or other apps requiring Internet.My BitTorrent app is showing I am merely making some 20 peers connection so I am not convinced that is an ISP problem but it's more about the router.

View 1 Replies View Related

Linksys Wireless Router :: No Connection To 5GHz Band On E3000 Dual Band?

Apr 14, 2010

I have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.

View 9 Replies View Related

Tp-link Dual-band Wireless :: Wdr4300 Can't Able To Recognize System /all Wifi Clients Lose Connection

Jan 22, 2013

Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : UPC Hungary Ltd.

I can't able to recognize a system - all wifi clients lose connection. When this happens, the ping answer time rech the ~2000 times, then totally lose the connection, the SSID is dissapear - checking with my phone (android - wifi analyzer) and TL-WN822N USB wifi adapter (with the inSSIDer application). Meanwhile the cable clients and the WAN connections works fine, didn't experience anything.If I restart the wifi service with the hardware on/off button, it runs well for some time.This problem appeared when I used the two older official firmware too.

I tried the auto-chanel function width auto channel width, tried to manually set up one of the less interfered channels with both 20MHz and 40MHz channel width, but none of them bring the solution.The intresting thing is, if I change the router with an old D-Link DI-604, the signal is weak, but the wifi connection is stable, with the same TL-WN822N adapter.I tried to guarantee the router, but after two weeks, my reseller said, it looks ok, they - at the TP-Link service - didn't find anything.

View 7 Replies View Related

TP-Link Dual-Band Wireless :: DHCP Not Working For 6 GHz Band?

Apr 2, 2013

Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Centurylink

I'm using a WDR3600 router, and I'm having difficulty with getting internet access on the 5 GHz band. Right now the router is broadcasting in both 2.4 and 5 GHz as two separate APs. The 2.4 GHz band works perfectly fine, but when I connect to the 5 GHz band my device is not assigned an IP address and cannot connect to the internet (or even the router configuration page). Unfortunately, I don't have another device capable of accessing the 5 GHz band, so I can't check to see if the computer is at fault, but both the computer and the router have worked together with no problems before, and this computer has done fine in accessing other 5 GHz bands.

View 1 Replies View Related

Linksys Dual Band Wireless-N USB Adapter - Internet Randomly Drops And Reconnects

Apr 24, 2011

My wireless internet has been acting a bit weird lately. I use a linksys Dual band wireless-N USB adaptor (WUSB600N) to connect to my router, a 2wire 1000sw. I am on windows 7. Recently, the internet has been dropping and reconnecting the connection weirdly; it is apparent in Portal 2 Co-op mode; it says the connection has been lost to the server, and then within 4 seconds, re-joins the server. During that time, the little network icon (the 4 bars in the task bar) says "Identifying."

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Router WDR4300 Would Lock Up Internet (WAN) Connection

Apr 15, 2013

Region : Hongkong
Model : TL-WDR4300
Hardware Version : V1

During long, heavy download streams (such as BT, video streaming) the router WDR4300 would still lock up the internet (WAN) connection for that client. I could still go to the admin web page on that client but no internet activity would occur until either rebooting the router.

View 8 Replies View Related

TP-Link Dual-Band Wireless :: VOIP Dropped Calls Over TP-Link WDR4300

Feb 14, 2013

Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast

I just upgraded my DLink DIR655 to WDR4300. My VOIP service has worked for the last 5 years. But with WDR4300, I'm frequently experiencing dropped calls. The call will be cut off every 20 seconds or so. This is really a deal-killer.

View 7 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 2.4 Ghz Is Not Working

Dec 31, 2012

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : Comcast

I have no problems connecting on a 5 GHz band or wired to the router. However any device connecting on 2.4 Ghz gets barely any bandwidth and drops after running for a short time. I have test numerous devices and have the same issue. What was odd is a device on 5GHz that worked fine had the same issue when connecting on 2.4 GHz which seems to say it is only that band. I have an old router that works fine on 2.4 GHz on channel 1 with all the security settings I used on the 4300.

View 14 Replies View Related

TP-Link Dual-Band Wireless :: NFS Is Very Slow With WDR3600?

Feb 18, 2013

Region : Netherlands
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 130129
ISP :

I've this dualband wireless router since a week.Now I found out, NFS is working very slow (actually NFS is not working at all).I have a Mede8er and a synology NAS server connected to the TP-LINK WDR3600 router.I have movie directories shared on the NAS using NFS.when I go to the NFS locations in my mede8er it takes very long before I can see the NFS mapping.When I connect the Mede8er straight to the Synology NAS server (Cross Cable connection) NFS is working as it should be.So the TP-LINK WDR3600 cannot handle the NFS protocol?

View 2 Replies View Related

TP-Link Dual-Band Wireless :: WDR7500 No Internet On 5 GHz

Mar 29, 2013

Region : UnitedStates
Model : TL-WDR4900
Hardware Version : Not Clear
Firmware Version :
ISP : Comcast

The internet connection works really well on the 2.4GHz connection and when wired. But when Im connected through the 5GHz network, I get no internet.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: Does WNR4300 Support With DD-WRT

Nov 15, 2012

Region : Iraq
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : Newroz Telecom

Can I replace firmawre TP-Link WDR4300 to DD-WRT to use it?, either my TP-link already has VPN,NAT,QOS,..etc like as DD-WRT so does need to replace firmware for better?

Does TP-Link WDR4300 support with DD-wrt? Is it working clearly without any problem?

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Get GMT Not Working

Jan 6, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : latest
ISP : Clear

Get GMT throws an error. I set known good public NTP servers, still get error. Also power cycling or rebooting the router seems to drop manual time settings, as well. I am using WDR4300 as a wireless access point, does that matter? Maybe I don't need time in access mode? It is connected to the Internet and is providing internet access to clients.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - 2.4 GHz Signal

Mar 28, 2013

Region : Venezuela
Model : TL-WDR4300
Hardware Version : Not Clear
Firmware Version :
ISP :

I have an issue with my TL-WDR4300 (regular, internet sharing use, no Open WRT or similar things). It was working well, until one day that my devices only receive the 2.4 GHz signal (no 5 GHz) and then I try to connect to 2.4 GHz and it asks for a password. I put my regular password and it doesn't work. Then I tried to bring it to factory default settings, I push the reset button for 8 seconds as the manual points and then same thing. What could I do?

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WR2543ND / USB External HDD Not Recognized

Mar 30, 2013

Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :

ISP : I have an external HDD that I regularly use in any computer I have access.It's an HDD enclosure 2.5" 3.0 USB, with a 750GB WD HDD inside. I use it in computers with all versions of USB, even in my TV. It doens't require an external power source, and just have 01 input/output, which is a USB port.After plugging it in the router (running with the last available firmware from TP-LINK - 3.13.27 Build 121207), I entered the setup screen of the router, and under USB Settings, pressed RESCAN, but the HDD wasn't recognized.What happens is that when I plug it in the router, the LED in it starts blinking (in normal usage, the LED becomes red for a couple of seconds, and then becomes steadly blue, when it gets connected into a equipment). It is probably a matter of power, as if the router wasn't providing enough power to it when it's plugged.Afterwards, I've made the following tests:

1) Used this External HDD in 3 different equipments (a notebook, a netbook and a TV), with different versions of USB ports. It was recognized and read normally in all of them.

2) I tested a pendrive with the router. After RESCAN, it was shown normally in Storage Sharing page.

3) I have downgraded the firmware to 120509 version, plugged the HDD in the router, and once again, it was an unsuccessful try.

What I can conclude from those tests is that:

1) My External HDD is working normally;

2) The router's USB port is working properly;

3) So, if both are working, it can only be a matter of compatibility between them.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - How To Get Full 450Mbps

Jan 14, 2013

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : plusnet

How do I get the full 450 Mbps out of my router on the status it saying 300Mbps

View 5 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 WDS Bridging Not Working

Nov 21, 2012

Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
Region : Others

I have Enable WDS Bridging and run Survey which detect the other SSID to be joined with the correct MAC address.I had filled the password of my second THOMSON v 585 V7 with the correct Auth Type both routers broadcast on channel 11.But my TP-Link 2543ND cannot made it work.I also disable DHCP and changed my LAN ip to 192.168.1.2 and can access it over my lan.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 / Can't Access Usb Storage

Mar 5, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

The router is working and when I plug in an external drive to usb I can see in the admin tool. It is setup to share without a password. I am using a PC with Vista on it...so I go to RUN and enter [URL] but I get the following message:'Windows cannot access [URL]

View 2 Replies View Related

Tp-link Dual-band Wireless :: Wifi Unstable On Tl-wdr4900?

Apr 3, 2013

Region : Netherlands
Model : TL-WDR4900
Hardware Version : V1
Firmware Version : 121211
ISP :

after changing from a Thomson router with wifi to the TP-link WDR-4900 I find that the wifi is very unstable. The 2.4GHz is operating on the same channel as my previous router (channel 8 - which is the lest busy channel around my house), and none of my neighbours have wifi on the 5GHz band. Almost all devices in my home regularly have to reconnect to the wifi, both on the 2.4GHz as on the 5GHz (tested with more than 8 devices). Almost every 15 minutes I see a "wifi channel disconnected" message, 10 seconds later followed by a "wifi connected" message. the Wifianalyser app on my tablet confirms that the wifi signal drops once in a while to zero. I use the latest stable frmware (I read that there is beta firmware but I don't like to loose warranty). The stability seems to unrelated to the amount of traffic on the wifi network.

Will this be fixed in the next firmware of the TP-WDR-4900 ?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved