D-Link DIR-615 :: After Reboot Password Doesn't Work?

Nov 21, 2012

i have a DIR-615 Rev C1, firmware 3.13.

After a reboot my password doesn't work anymore (wich is normal I guess) and  all default passwords dont either. Such as ''Password'' or ''Admin''.

View 1 Replies


ADVERTISEMENT

Tp-link 300mbps Wireless :: Tl-wr1043nd Password Protection Of Wifi Doesn't Work

Apr 11, 2013

Region : Netherlands
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :

I installed my brand new TP-Link router and both wired and wireless internet connection work perfectly fine. But when I tried to secure the wifi with a password (I followed the instructions on last page of installation guide) I can not connect to the internet any more. After entering the correct password, both iphone and mac-book simply say "unable to join the network". I selected WPA2-PSK-personal as recommended. For now I switched off the security settings, but I live in a building with many neighbours and they are now consuming most of my bandwidth (apparentlyI am surrounded by illegal downloaders

View 2 Replies View Related

D-Link DIR-825 :: Doesn't Recognize IP Address Until Reboot

Jan 22, 2013

I have multiple computers on my network as well as cell phones logging in as wifi. At least once a day I have trouble or another computer has trouble getting on line through my network. I have to unplug my router and replug. Its as if it doesn't recognize the ip address until reboot.

View 1 Replies View Related

Cisco Wireless :: E1000 - Password Doesn't Work

Dec 26, 2011

reset my Linksys E1000 and now I can't access wifi from my phone as neither my pw or my default ps work.

View 2 Replies View Related

Routers / Switches :: Linksys WRT54GS Doesn't Work With Password?

Mar 5, 2011

I have a linksys wrt54gs wireless router (working fine since last 3 years) which connects to the internet fine if there is no password set. However if i set WEP password to protect the wireless connection, i am not able to connect to the wireless connection. Everytime i enter the passphrase, when trying to connect to the wireless network, it refuses to accept the password. I have tried this with 2 laptops (both running windows 7) and both have same issue.

View 2 Replies View Related

Cisco Routers :: WRVS4400N V2 Default Password Doesn't Work

Aug 6, 2011

I upgraded the firmware for my WRVS4400N v2 to version 2.0.2.1 firmware, now old and default passwords don't work. I have tried resetting it as well, and the default password does not work.

View 1 Replies View Related

Linksys Wireless Router :: E2500 - Blank Username And Admin In Password Doesn't Work

Feb 23, 2013

Blank user name and admin in password doesn't work.  How to reset these ?

View 1 Replies View Related

D-Link DIR-615 :: Doesn't Work In N Mode

May 7, 2011

hardware version D3, FW 4.10 and 4.11 same problem.

i tried with 4 wlan adapters: two of them support 802.11b/g, they always work find no matter which settings. the other two support 802.11b/g/n, as default "n" is enabled, so does DIR-615, both wlan adapters can be connected to DIR-615, they get their LAN-IP, but they can access neither DIR-615(no respone to ping) nor internet. but if i disable "n" mode either in the adapter or in DIR-615, everythin works fine, of course only with 54mbit max.

so what can i do to use the n mode?

View 1 Replies View Related

D-Link DIR-825 :: Wireless Simply Doesn't Work

Aug 10, 2011

The DIR-825 wireless simply doesn't work.  When I called tech support, we cleared some settings and hard-powered the unit on/off and it finally turned on the wireless radio.  A couple weeks later I pull out my laptop to use in the house via wireless and the wireless on the DIR-825 is OFFLINE AGAIN...fallen and it can't get UP.Is anyone having issues with keeping their wireless online?  OK - powered it off for 5 minutes...now the wireless is working. I think changing configuration settings causes the thing to lock up.

View 1 Replies View Related

D-Link DIR-825 :: Shareport Doesn't Work In Windows 8?

Feb 3, 2013

Recently I bought a Windows 8 (64bits) computer, which is now part of my home network, but it has problems with Shareport. The other computers can be easily connected to a USB printer on my DIR-825 (HW B1) router, but the W8 computer refuses to completely install Shareport (both the CD version and the latest download v1.17).  I also tried Shareport-Plus v4.11 (found on the DIR 835 page), which did install correctly, but was still unable to see the USB printer. What can be done? Can D-Link provide a new version of Shareport?

View 3 Replies View Related

D-Link DCS-930L :: Doesn't Work With WPA Encryption

Dec 25, 2011

I can't get my brand new DCS-930L cam to connect to my network by using the WPA / WPA2 encryption. Works ok wired, with WEP or with no encryption enabled. Red led is on the front. I've tested sw version 1.02, 1.03 and the latest 1.04b03. Same result: WPA doesn't work. I have a Thomson TG789 Gateway/Router as provided by my ISP. All other units in the network works perfectly fine on WPA i.e. PC, Mac, printers, mobile phones etc etc.

View 1 Replies View Related

D-Link DAP-1522 :: AP MODE Doesn't Work?

Jan 6, 2011

I have a DSL router Pirelli PDF A1000G.I have a Linksys e3000 and I have a dap-1522.When I bought a dap-1522 I thought it could do access point in fact i saw many videos in dlinktv before choosing an access point from DIY with mike etc to youtube there are 2 videos one showing bridged mode and another ap mode!Now what happens is this I have upgraded from firmware 1.11 that came as default to 1.21 i connect it wired to my linksys e3000 when it is connected with the ethernet cable wired I can connect to the internet and navigate and open sites and my ps3 can connect to it but my range is not very good only 40%!

Now I bring it downstairs remove the ethernet cable and connect it to the power and then you can connect to it but since it isn't connected to my router which is upstairs i can't access websites neither can I play on my ps3!I don't know does only ap mode works when it is connected to the router wired because what happens is if you don't put ethernet cables in the back of the dap-1522 and just connect it to power then here doewnstairs you can connect to the dap-1522 my signal is like 87% but while I'm connected with my laptop I can't access websites and in the ps3 I can't connect!

and choose  access points there are (4) listed: dap-1522, dap-1160, dap-1353 and dap-2553, I thought of buying dap-1522 because it could support abgn while 1160 only supports g and 1353 only supports n to repeat to signal here downstairs and be a good access point!

View 3 Replies View Related

D-Link DIR-655 :: Port Forwarding Doesn't Work From LAN PC?

May 12, 2011

Edit I've found a work-around. It's on page 2: [URL]

I'm having this really weird issue with my DIR-655 revB. I have some port forwarding rules set up and externally they work fine. However, if I try connecting to my IP address using those same ports from a computer within my LAN, it won't connect.

Externally, I can ping my WAN address and connect through forwarded ports. No problems. Internally, pinging my WAN address apparently works (just now is the first time that's worked for me), however I can't access any of my computers using the WAN IP and port forwarded ports. I can access them by going directly to their hostnames or LAN IPs.

Things I've tried:

-Disabling/enabling firewalls on all computers involved

-Disabling/enabling QoS engine

-Disabling/enabling DNS relay

-Disabling/enabling Advanced DNS

-Adding custom nameservers from Google and Comodo

-Restarting computers

-Clearing DNS cache (I use a dynamic DNS name which works externally but not internally. This gets the correct IP internally and connecting directly to the IP doesn't work either.)

-Modifying the NAT Endpoint Filtering settings

I have an external DSL modem connected to the router using PPPoE if it matters.

The weird part is that it works externally but I've modified all of the values I can think of in the config with no luck. I upgraded to the DIR-655 from a DIR-615 which had all these settings in it and worked fine (until it started acting up which is why I replaced it).

View 14 Replies View Related

D-Link DIR-655 :: Blocking Access To Websites Doesn't Seem To Work

Feb 26, 2012

Like others I see on this board, we've got middle- and high-school age kids whose access to FB and other sites needs to be controlled/scheduled.

I thought the DIR-655 was great, in that it has features that, on the face of it, would seem to be ideal for blocking domains and restricting access.

My problem:  I've never been able to get this to work.

I've set up schedules and created lists of domains that I want to limit access to according to the schedules, but the only constraint I've ever gotten to stick is blocking access completely to the router.

*None* of the schedule-based or website-based access controls have ever worked; I'll put the block in place to my daughter's computer's MAC address so she shouldn't be able to get to youtube or facebook, save, bounce the router, but then I go by her room and she's still busily chatting away online to her FB friends.

Based on similar posts I've seen on this forum, this may not be a unique problem.

So in a nutshell, this is what I want to do:

1) Block certain computers (identifiable by MAC address)

2) from being able to get to particular named domains (and any of their sub-domains)

3) according to a schedule that I can create and modify.

My preference would be to do this in the router, but again, responses I've seen here suggest that may not be possible.

View 1 Replies View Related

D-Link DIR-655 :: Web Filtering Doesn't Work When Linked To MAC Address

Jan 5, 2011

My DIR-655:
Hardware Version: A4
Product Page: DIR-655

The problem is that Website Filer doesn't work if on STEP 3: SELECT MACHINE of Access Control the machine was selected by MAC address. When the machine was selected by IP everything is fine.The problem is that IP addresses are assigned dynamically, so how to make sure that the policy would be applied to the same machine? 

View 8 Replies View Related

D-Link DIR-825 :: Internet Doesn't Work After Firmware Upgrades

Dec 11, 2011

I just got my DIR 825.  It had 2.02NA Firmware in it. It had a few options that I wanted to use but didn't work. So I thought I would update firmware. I follow the instruction from dlink to install firmware. So I loaded 2.03 and noticed internet connection not working. So then I loaded 2.05 part1 and part2. Still could get internet connection to work but the reason to upgrade the option I wanted worked. So then I loaded 2.06 and still same result. No internet connection. So then I loaded the original firmware back in and internet connection works. Why doesn't the internet work on the other firmware updates. I got the updates from dlink website. I would like to update firmware

View 9 Replies View Related

D-Link DIR-655 :: Website Filter Doesn't Work Anymore

Jan 12, 2012

I had the website filter ON and it was working very well to block a few websites on a schedule. And after a few month, it doesn't work any more. While it is possible that I scewed up the setting , I have tried so many settings.

So:DIR655 fw 1.32NA,hw A3,"Enable access control" is on with the desktop MAC address (used copy this MAC)(I have also tried my laptop MAC),web site filter is set to "deny",the router time is set using NTP dlink server,

View 3 Replies View Related

D-Link DIR-655 - Why Doesn't Port Forwarding Work Correctly

Jul 27, 2012

First off, my router is a D-Link DIR-655, firmware v2.07. I'm trying to port forward port 25565.

My port forward settings are this:

However, when I use this open port checker, it claims that I don't have that port open. It looks like this, without the blurred out parts:

Added note: The way I want to use it is by my IP (xxx.xxx.xxx.154:25565). I have the software installed to do so (I'm using a minecraft server, connecting through minecraft), but I can't enter my IP in the IP address field, it says that it's out of the range of the LAN.

View 2 Replies View Related

D-Link DIR-825 :: 2.05NA Doesn't Work With Any Easy Search Utility

Jul 10, 2011

I tried to upgrade to 2.05NA several times and there always ends up being an issue that support is too sad to give the correct answer to and just puts a consumer thru "jumping thru hoops" and getting nowhere.2.05NA (actually started with 2.03NA) first caused a problem with limiting my upload speed to 1024mb. I happened across the fix on another forum and tried it and it worked. It was the default QoS setting D-Link changed after version 2.02NA and refuses to release a new firmware to fix this for everyone. Why they don't release a new FW that fixes the issue but keeps things promised on the package working is beyond me.  Now, I purchased a D-Link DNS-323 and I finally got drives to fill it some time back. If 2.05NA is loaded, the Easy Search Utility will not connect to the NAS. I have tried the version the NAS came with AND the latest version offered. It will see the NAS upon 1st launch of the latest Easy Search Utility, but it will not connect and then it disappears if you relaunch the utility and won't return until a reboot. Bottom Line: it will not connect with 2.05NA loaded. It works fine with 2.02NA.

What is the setting that D-Link has screwed over here also that is causing this problem? It is pretty sad that their own hardware items won't play well together unless you run old FW. What setting D-Link changed that is making the D-Link DIR-825 not connect to the D-Link DNS-323 NAS when the DIR-825 has 2.05NA loaded. I have a DIR-825 Rev. B1 and a DNS-323 NAS with its latest firmware. I am using 2.02NA on the router since that is the only one that works and is the latest stable release(other than the DHCP reserve issue), no matter what D-Link wants to try to make people think. I won't try their support since they NEVER did give me the fix for the QoS upload issue and when I asked them to put it as a sticky in this forum when I found the answer somewhere else....well, there is no sticky as we all know. I would like to be able to have the DHCP Reserve issue working too, but I would like to connect to my NAS more at this point.

View 6 Replies View Related

D-Link DIR-655 :: Virtual Server Settings Doesn't Work Anymore

May 17, 2011

I have several ports opened on my DIR-655 A3, pointing to specific ports on a NAS server i have on my network.

I've already try this:

- Reboot the router

- Erase all Virtual Server Settings and try open only one port

- Re-flash the router with latest European firmware - 1.34b05EU

View 11 Replies View Related

TP-Link 3G/3.75G Router :: MR3420 - Port Forwarding Doesn't Work

Jan 24, 2013

Region : Austria
Model : TL-MR3420
Hardware Version : V2
Firmware Version : TL-MR3420_V2_121206
ISP : 3

I am using a MR3420 V2 together with a E398 modem. The connection works well, but I can't do any port forwarding (virtual server). Using another router (Tiny Dovado) with the same E398 modem works flawlessly to forward ports.

View 14 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3040 Doesn't Work With Windows 7 Machine

Mar 18, 2013

Region : Germany
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP :

Just got TL-MR3040 from amazon, not very happy that it is version 1, they could at least mention it in the description, but whatever...The problem is, i can not make it work with my PC laptop(thinkpad x120e with Windows 7 64 bit). Which means,1 not possible to get into web interface to configure it, and 2 if i configure it with old powerbook (os x 10.4) to share internet from usb stick, i can connect to it's wireless network but it doesn't share internet with my pc laptop,while mac and ipad working perfect...I've try to log in into web interface through the cable, still no luck...Not sure i want to re-install the whole system on my laptop just to see if it will change anything, it works with any other router, and usb sticks...

View 3 Replies View Related

D-Link D-ViewCam :: 3.2 Doesn't Work With More Than Two Cameras Monitored (942-L / 5222-L)

Jul 10, 2012

I have (2) 942-L, and (1) 5222-L on one network.  port forwarding set on router; (942) 192.168.1.3:1024, (942) 192.168.1.4:1025, and (5222) 192.168.1.8:80.  no matter if all 3 are connected to dViewCam, only two will work at a time.  Disconnect any third, and they work fine.  reconnect 3rd, and one disconnects intermittently.  On a side note, if I run a different program on another computer (iMac); i.e. IP Camera Viewer, they all work fine.  I know, I know, but I like DViewCam, because it's the only thing running the PC computer. 

View 3 Replies View Related

D-Link DCS-930L :: Motion Detection With Email Doesn't Work

Dec 4, 2011

I recently set up two cameras. I had set up one for motion detection and email to a gmail account. It seemed to work fine, but then for some reason the motion detection tab didn't show the room like it did before. It doesn't show any picture or anything like it did before, so I couldn't choose the squares to choose the detection area. This is through mydlink account->camera info->advanced settings, and logging in to the camera remotely.So I switched to the other camera, and got it working as of last week. But now, the motion detection doesn't work anymore? It appears to be related to the username/password for the email account. I can no longer send test emails, it says invalid username/password, though the exact same values worked last week, and I didn't change anything. I tried resetting it, then setting it again, but no luck.

View 5 Replies View Related

TP-Link 3G/3.75G Router :: MR3420 - Works In 3g Only Doesn't Work In 3g Preferred

Dec 24, 2012

Region : India
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : Reliance

I've just set up a MR3420. It works fine in "WAN only" mode and provides access via our ADSL modem. It also works fine in "3G only" mode and provides access via a Reliance Netconnect+ USB modem (a Huawei E150 I think). I updated the firmware to the latest version in order to get it to work with the USB modem.

The problem I have is that when I set it to "3G preferred" it doesn't seem to connect over 3G. I can see it tries to connect but then fails and then WAN takes over. The connect and disconnect options are greyed out on the 3G page so I am unable to manually get it to retry. I've tried leaving it for a long time but it doesn't seem to connect over 3G ever. I've tried setting 3G to connect on demand and connect automatically but both behave the same.

View 3 Replies View Related

D-Link DIR-655 :: Webaccess Filter / Access Control Doesn't Work With 1.35NA

Aug 28, 2011

For some reason I can't get Access Control/Webaccess Filters working on my Dir-655 w/ 1.35NA.  I've tried it with MAC and IP Address without any success.  I've also enabled/disabled/enabled DNS Relay, recreated the rules,  recreated the filters, etc.  Nothing.

View 14 Replies View Related

D-Link DIR-655 :: Can't Connect Roku - Password Does Not Work

Feb 10, 2012

I tried to set it up on a new dir 655 but the password the roku asks for does not work. I have the latest firmware installed. I tried entering my ssid manually and then the key. I did reset everything and try again. Why is my wireless not working? The ethernet port to my desktop is working fine.

View 2 Replies View Related

Internet Disconnects / Need Reboot To Make It Work

Nov 26, 2012

It seems like my internet connection constantly disconnects and I have to restart my computer to get it to work again. I don't think its the internet connection because I've lived in 4 different apartments and this has happened. I'm having to restart my computer at least 4 times a day.Another thing I wanted to add is that it especially happens when I do something that is 'internet intensive' such as youtube or when I am using skype or msn video call.

View 1 Replies View Related

Cisco Routers :: SA500 Not Work And Gets Auto Reboot

May 27, 2013

My IPSEC tunnel regulary doesn't work, and the only way is to reboot the SA520.
 
Is it possible with a batch or something else to auto reboot the SA520 ?

View 1 Replies View Related

Cisco Routers :: RV042 Protectlink Did Not Work After Reboot

May 7, 2012

I have activated Protectlink Web. But today i started to get "router is busy"  in all pages, so we restarted the router. That problem was solved but now the the web Protection is no longer working. It says activated but licence status says waiting.

View 1 Replies View Related

Cisco Routers :: RV220W Needs Daily Reboot To Work

Mar 21, 2013

I recentlydeployed a RV220W and got it mostly working for the environment. One issue: remote users connecting from different locations. I set up QuickVPN to accomodate them, which seems to 'kinda' work. 'Kinda' because I have to reboot the RV220W each day before the clients can connect succesfully. The clients run a mix of WinXP-32, WinVista-32 and Win7-64. All other settings in the QuickVPN client have been verified for each user. They each have the latest verion of QuickVPN and the RV220W firmware is at the latest version. The networks at the remote locations are not numbered the same as the host location.
 
The clients work several times a day, but the RV220W needs to be rebooted every morning. Is this a known problem with a work around? Is there a better solution for VPN access from Vista-32 and Win 7-64?

View 6 Replies View Related

Linksys Wireless Router :: E4200 DCHP Client Table Doesn't Reset After Soft Reboot

Jul 15, 2011

One of the many things that I liked about the e4200 over my olg 54GL was the fact that I could reboot it remotely.   However, I've recently had a few problems that only a full power down would fix.   In addition, I've noticed that the DCHP client table doesn't reset when I do a soft reboot.   Is this intentional?   Is the soft reboot not really a full reboot? Can it be made a real reboot?

View 7 Replies View Related

VPN Doesn't Work Properly?

Jan 11, 2011

I have an problem with VPN connection on notebooks. Sometimes the VPN connection works perfectly, and other times it just doesn't work at all.The Cisco VPN client software is version 5.0.04.0300. Operating system is Windows XP Prof SP2.When the connection fails, the client statistics window shows "Bytes Received: 0".Rebooting the system, has no effect

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved