D-Link DIR-655 :: Blocking Access To Websites Doesn't Seem To Work

Feb 26, 2012

Like others I see on this board, we've got middle- and high-school age kids whose access to FB and other sites needs to be controlled/scheduled.

I thought the DIR-655 was great, in that it has features that, on the face of it, would seem to be ideal for blocking domains and restricting access.

My problem:  I've never been able to get this to work.

I've set up schedules and created lists of domains that I want to limit access to according to the schedules, but the only constraint I've ever gotten to stick is blocking access completely to the router.

*None* of the schedule-based or website-based access controls have ever worked; I'll put the block in place to my daughter's computer's MAC address so she shouldn't be able to get to youtube or facebook, save, bounce the router, but then I go by her room and she's still busily chatting away online to her FB friends.

Based on similar posts I've seen on this forum, this may not be a unique problem.

So in a nutshell, this is what I want to do:

1) Block certain computers (identifiable by MAC address)

2) from being able to get to particular named domains (and any of their sub-domains)

3) according to a schedule that I can create and modify.

My preference would be to do this in the router, but again, responses I've seen here suggest that may not be possible.

View 1 Replies


ADVERTISEMENT

D-Link DIR-615 :: Blocking Not One Specific Website But All Websites?

May 16, 2013

In Setup > Parental Control it is possible to set rules attached to specific website URLs. I want to block access from 1am to 6am.

However these rules only apply to websites URL. Is there a way to apply a rule to ALL websites at once? I tried to enter "*" or "*.*" in website URL field but it doesn't work.

View 1 Replies View Related

D-Link DIR-655 :: Blocking Specific Computers On Lan From Websites?

Apr 28, 2011

Is there a way to block specific computers on the LAN from specific web sites by the domain name? All I can see is that if I put, for example, www.facebook.com, it will be blocked from all computers on the LAN, whereas if I want to block only 192.168.1.3 for example, I have to use the IP address through the Access Control, which is much harder and ****e to some "work around" by the user.

View 3 Replies View Related

Linksys Wireless Router :: URL Blocking Doesn't Work On E4200

Oct 17, 2011

I have the 1.0.03 firmware installed and URL blocking doesn't work.  I assigned the policy to the entire address range and could still access the web site I wanted to block.

View 1 Replies View Related

Cisco Firewall :: 5500 Blocking Skype Application Doesn't Work With ASA CX

May 12, 2013

I'm trying to build different content security scenarios for a potential deployment of ASA5500-X series firewall with CX module and ran into a trivial problem. A simple access policy has been configured to deny Skype. It's as simple as it sounds. To my surprise I don't see that it is being enforced.I have all my pending changes committed, events are now showing with hits, see attached print screens. Tried to start Skype on my PC with the source shown on the print screen it and don't see any effects of this policy.
 
As a side note, I know for sure that other type of filtering does work, i.e. I have configured a deny filter for gambling URL category and it seems to work nicely.

View 3 Replies View Related

D-Link DIR-655 :: Webaccess Filter / Access Control Doesn't Work With 1.35NA

Aug 28, 2011

For some reason I can't get Access Control/Webaccess Filters working on my Dir-655 w/ 1.35NA.  I've tried it with MAC and IP Address without any success.  I've also enabled/disabled/enabled DNS Relay, recreated the rules,  recreated the filters, etc.  Nothing.

View 14 Replies View Related

Cisco Firewall :: RV120W - URL Blocking / Limit Internet Access To 1 Or 2 Specific Websites

Aug 18, 2011

My company has a peer to peer network of 10 personal computers without a server.  Operating systems from Windows XP to Vista.  I've recently installed a Cisco RV120W Wireless-N VPN Firewall.  It's configured in DHCP Server Mode with printers/copiers that have static IPs below the DHCP range.
 
I'm having a problem with certain stations being used for personal networking, shopping, etc. during business hours.  Consequently I would like to limit internet access on these stations.  However, some internet access is required because of online database software that's an integral part of our business.  I've been reading in the Administration Guide about URL Blocking.  Would it be possible to give static IPs to certain stations and then limit their internet access to 1 or 2 specific websites?
 
FYI, I've read about the Trusted Domains and Blocked Keywords but cannot quite understand how to parley this into the solution I need.

View 1 Replies View Related

D-Link DIR-600 :: Firewall Doesn't Load Some Websites

Jun 26, 2012

I'm using DIR 600 for home use. Recently, I noticed that I have trouble connecting to some websites (Twitpic.com, 4shared.com) which I never had any problems before I used the wireless router. It doesn't exactly block the websites but rather it won't load completely (i.e., with Twitpic, I can load the site but not the images; for 4shared I really can't load the page itself).Initially, I had problems updating JDownloader after installation. I tried using our old Edimax wired router, and the JDownloader update worked flawlessly. I also tried loading Twitpic while connected via LAN, and it also worked properly.I'm assuming the problem lies with the wireless router but when I set it up for use I only tinkered with the WPA/WPA2 security for a password-secured wifi connection at home, and nothing more since I can't understand the other features.

View 5 Replies View Related

D-Link DIR-615 :: Doesn't Work In N Mode

May 7, 2011

hardware version D3, FW 4.10 and 4.11 same problem.

i tried with 4 wlan adapters: two of them support 802.11b/g, they always work find no matter which settings. the other two support 802.11b/g/n, as default "n" is enabled, so does DIR-615, both wlan adapters can be connected to DIR-615, they get their LAN-IP, but they can access neither DIR-615(no respone to ping) nor internet. but if i disable "n" mode either in the adapter or in DIR-615, everythin works fine, of course only with 54mbit max.

so what can i do to use the n mode?

View 1 Replies View Related

Blocking Websites Using Cisco Router 1841?

Feb 1, 2011

Can I configure a cisco router 1841 to block specific sites?

View 4 Replies View Related

Cisco Firewall :: 5510 Blocking All Websites Except Few

Nov 16, 2011

How to block a single website, but I want to do the opposite. I would like to block all website except for a handful of them. Any example configs?

View 3 Replies View Related

WRT54G Blocking Websites With Linksys Router

Sep 20, 2011

My roommate and people he invites over keep downloading torrents from public sites and I've gotten 3 emails from Comcast so far. I've talked to him, but I want to make it impossible for him to be able to download them...

I have a Linksys WRT54G router.

I've made 6 internet access policies in the Access Restrictions settings of my router, but for some reason only the 1st policty works. I had 'torrent' as a keyword on the first policy, and when I googled most popular torrent sites it wouldn't let me... so I took 'torrent' off the keyword list and did my google search, and after I wrote down the 40 most popular public torrent sites, I added torrent back as a keyword for website blocking and saved it, but now it doesn't work for some reason. So at first it worked, then I took it off so I could search using the keyword torrent, then I added it back again and saved it and now it doesn't work.

1st policy works (besides the torrent keyword). I have all my policies enabled, have set ip ranges from 0-254 for all of them, and gave them each a name.

How come only the first policy works, and how come all the keywords in the first policy work except one after I deleted it and then re-added it?

View 3 Replies View Related

D-Link DIR-825 :: Wireless Simply Doesn't Work

Aug 10, 2011

The DIR-825 wireless simply doesn't work.  When I called tech support, we cleared some settings and hard-powered the unit on/off and it finally turned on the wireless radio.  A couple weeks later I pull out my laptop to use in the house via wireless and the wireless on the DIR-825 is OFFLINE AGAIN...fallen and it can't get UP.Is anyone having issues with keeping their wireless online?  OK - powered it off for 5 minutes...now the wireless is working. I think changing configuration settings causes the thing to lock up.

View 1 Replies View Related

D-Link DIR-825 :: Shareport Doesn't Work In Windows 8?

Feb 3, 2013

Recently I bought a Windows 8 (64bits) computer, which is now part of my home network, but it has problems with Shareport. The other computers can be easily connected to a USB printer on my DIR-825 (HW B1) router, but the W8 computer refuses to completely install Shareport (both the CD version and the latest download v1.17).  I also tried Shareport-Plus v4.11 (found on the DIR 835 page), which did install correctly, but was still unable to see the USB printer. What can be done? Can D-Link provide a new version of Shareport?

View 3 Replies View Related

D-Link DCS-930L :: Doesn't Work With WPA Encryption

Dec 25, 2011

I can't get my brand new DCS-930L cam to connect to my network by using the WPA / WPA2 encryption. Works ok wired, with WEP or with no encryption enabled. Red led is on the front. I've tested sw version 1.02, 1.03 and the latest 1.04b03. Same result: WPA doesn't work. I have a Thomson TG789 Gateway/Router as provided by my ISP. All other units in the network works perfectly fine on WPA i.e. PC, Mac, printers, mobile phones etc etc.

View 1 Replies View Related

D-Link DAP-1522 :: AP MODE Doesn't Work?

Jan 6, 2011

I have a DSL router Pirelli PDF A1000G.I have a Linksys e3000 and I have a dap-1522.When I bought a dap-1522 I thought it could do access point in fact i saw many videos in dlinktv before choosing an access point from DIY with mike etc to youtube there are 2 videos one showing bridged mode and another ap mode!Now what happens is this I have upgraded from firmware 1.11 that came as default to 1.21 i connect it wired to my linksys e3000 when it is connected with the ethernet cable wired I can connect to the internet and navigate and open sites and my ps3 can connect to it but my range is not very good only 40%!

Now I bring it downstairs remove the ethernet cable and connect it to the power and then you can connect to it but since it isn't connected to my router which is upstairs i can't access websites neither can I play on my ps3!I don't know does only ap mode works when it is connected to the router wired because what happens is if you don't put ethernet cables in the back of the dap-1522 and just connect it to power then here doewnstairs you can connect to the dap-1522 my signal is like 87% but while I'm connected with my laptop I can't access websites and in the ps3 I can't connect!

and choose  access points there are (4) listed: dap-1522, dap-1160, dap-1353 and dap-2553, I thought of buying dap-1522 because it could support abgn while 1160 only supports g and 1353 only supports n to repeat to signal here downstairs and be a good access point!

View 3 Replies View Related

D-Link DIR-615 :: After Reboot Password Doesn't Work?

Nov 21, 2012

i have a DIR-615 Rev C1, firmware 3.13.

After a reboot my password doesn't work anymore (wich is normal I guess) and  all default passwords dont either. Such as ''Password'' or ''Admin''.

View 1 Replies View Related

D-Link DIR-655 :: Port Forwarding Doesn't Work From LAN PC?

May 12, 2011

Edit I've found a work-around. It's on page 2: [URL]

I'm having this really weird issue with my DIR-655 revB. I have some port forwarding rules set up and externally they work fine. However, if I try connecting to my IP address using those same ports from a computer within my LAN, it won't connect.

Externally, I can ping my WAN address and connect through forwarded ports. No problems. Internally, pinging my WAN address apparently works (just now is the first time that's worked for me), however I can't access any of my computers using the WAN IP and port forwarded ports. I can access them by going directly to their hostnames or LAN IPs.

Things I've tried:

-Disabling/enabling firewalls on all computers involved

-Disabling/enabling QoS engine

-Disabling/enabling DNS relay

-Disabling/enabling Advanced DNS

-Adding custom nameservers from Google and Comodo

-Restarting computers

-Clearing DNS cache (I use a dynamic DNS name which works externally but not internally. This gets the correct IP internally and connecting directly to the IP doesn't work either.)

-Modifying the NAT Endpoint Filtering settings

I have an external DSL modem connected to the router using PPPoE if it matters.

The weird part is that it works externally but I've modified all of the values I can think of in the config with no luck. I upgraded to the DIR-655 from a DIR-615 which had all these settings in it and worked fine (until it started acting up which is why I replaced it).

View 14 Replies View Related

Security / Firewalls :: Cyberoam Not Blocking Https Websites?

Jan 21, 2013

i created a blockyoutube policy , when someone types youtube.com, system tells him he cannot access the website. But when a client types https:// he gains normal access .

View 6 Replies View Related

Cd Doesn't Work And Cannot Get Access To Website For Set Up

Dec 25, 2011

cd doesn`t work and can access web for set up

View 1 Replies View Related

D-Link DIR-655 :: Web Filtering Doesn't Work When Linked To MAC Address

Jan 5, 2011

My DIR-655:
Hardware Version: A4
Product Page: DIR-655

The problem is that Website Filer doesn't work if on STEP 3: SELECT MACHINE of Access Control the machine was selected by MAC address. When the machine was selected by IP everything is fine.The problem is that IP addresses are assigned dynamically, so how to make sure that the policy would be applied to the same machine? 

View 8 Replies View Related

D-Link DIR-825 :: Internet Doesn't Work After Firmware Upgrades

Dec 11, 2011

I just got my DIR 825.  It had 2.02NA Firmware in it. It had a few options that I wanted to use but didn't work. So I thought I would update firmware. I follow the instruction from dlink to install firmware. So I loaded 2.03 and noticed internet connection not working. So then I loaded 2.05 part1 and part2. Still could get internet connection to work but the reason to upgrade the option I wanted worked. So then I loaded 2.06 and still same result. No internet connection. So then I loaded the original firmware back in and internet connection works. Why doesn't the internet work on the other firmware updates. I got the updates from dlink website. I would like to update firmware

View 9 Replies View Related

D-Link DIR-655 :: Website Filter Doesn't Work Anymore

Jan 12, 2012

I had the website filter ON and it was working very well to block a few websites on a schedule. And after a few month, it doesn't work any more. While it is possible that I scewed up the setting , I have tried so many settings.

So:DIR655 fw 1.32NA,hw A3,"Enable access control" is on with the desktop MAC address (used copy this MAC)(I have also tried my laptop MAC),web site filter is set to "deny",the router time is set using NTP dlink server,

View 3 Replies View Related

D-Link DIR-655 - Why Doesn't Port Forwarding Work Correctly

Jul 27, 2012

First off, my router is a D-Link DIR-655, firmware v2.07. I'm trying to port forward port 25565.

My port forward settings are this:

However, when I use this open port checker, it claims that I don't have that port open. It looks like this, without the blurred out parts:

Added note: The way I want to use it is by my IP (xxx.xxx.xxx.154:25565). I have the software installed to do so (I'm using a minecraft server, connecting through minecraft), but I can't enter my IP in the IP address field, it says that it's out of the range of the LAN.

View 2 Replies View Related

D-Link DIR-615 :: Keeps Signal But Won't Access Websites

May 5, 2011

Over the past few months I've noticed that, although my USB adapter picks up a good signal from the router (never less than 65 - 70% signal strength) and stays connected to it I am at times unable to access any websites. It started off happening once or twice a week and could happen for about 5 - 10 minutes at a time but now happens several times a day and can stop me accessing the web even though the USB adapter says that it is still picking up the signal from the router. After a period of time it will just start working again, I don't have to restart the router or anything.I've tried changing the channel to a few different ones after using a utility to see what my neighbours were using but this hasn't made a difference. I'm using a Netgear RangeMax Dual Band Wireless-N USB Adapter. It has the N technology so should work pretty well.The current firmware version is 1.00VG dated 5th May 2009. In the router settings it allows you to search for an update for the firmware however it told me that my current version is the most up to date.

View 7 Replies View Related

Cisco Wireless :: Linksys E4200 Arbitrarily Blocking Websites

Apr 19, 2013

I have a E4200 V1 router.  A website that I have been accessing for years all the sudden no longer works.  If I use my PC and PPTP VPN to another location, I can browse the website fine.  If I remove the router and plug directly into my Comcast internet connection, I can browse the website fine.  If I enable logging on the router, it shows the connection on port 80 just like every other outgoing connection.  Security log shows nothing.  I was on firmware version 1.0.03, upgraded to 1.0.05.  Tried resetting to factory defaults before I updated firmware, and after I updated the firmware.  The website all the sudden just stopped working 2 weeks ago.  I also tried putting my PC as the DMZ IP address and nothing.

View 1 Replies View Related

Linksys Wireless Router :: E1000 Seems To Be Blocking Websites All Of A Sudden?

Oct 29, 2011

I am getting 404 messages but the browser is connecting to the site's server (you can see the little icon for each site in the tabs).  The two sites I have identified that I cannot access are UIowa libraries and Music from Outer Space.

-I have emptied all cache, cookies, etc.

-I have reset the router to factory defaults and updated the firmware

-I can load both sites from other networks, however two different computers using my router fail to load these two sites.Until a couple days ago I was able to access both of these sites regularly, and I haven't installed anything or changed any settings on my computer.The fact that two different computers cannot load these sites seems to indicate that it is a router problem.

View 3 Replies View Related

D-Link DIR-825 :: Blocking Access To Website?

Apr 20, 2013

For the last week, I haven't been able to access my banking web site (Royal Bank in Canada).  It doesn't matter which browser (FireFox, IE, Chrome) or computer (desktop, laptop) or even my cell (on WiFi).It must be the router (DIR-825, HW-B1, FW-2.07NA) since I can connect to the web site fine if I connect straight to the modem.  (Also, if I turn off WiFi on my cell, I can connect to their web site but once I turn WiFi back on, it wont connect).I tried restoring to factory settings but that didn't work.I tried some of the suggestions here: http:[url].....

- Turn off ALL QoS or Disable Traffic Shaping. Advanced/QoS.

- Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.

- Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking

- Ensure devices are set to auto obtain an IP address.

- Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.

- Enable uPnP and Multi-cast Streaming under Advanced/Networking.

View 3 Replies View Related

D-Link DIR-825 :: 2.05NA Doesn't Work With Any Easy Search Utility

Jul 10, 2011

I tried to upgrade to 2.05NA several times and there always ends up being an issue that support is too sad to give the correct answer to and just puts a consumer thru "jumping thru hoops" and getting nowhere.2.05NA (actually started with 2.03NA) first caused a problem with limiting my upload speed to 1024mb. I happened across the fix on another forum and tried it and it worked. It was the default QoS setting D-Link changed after version 2.02NA and refuses to release a new firmware to fix this for everyone. Why they don't release a new FW that fixes the issue but keeps things promised on the package working is beyond me.  Now, I purchased a D-Link DNS-323 and I finally got drives to fill it some time back. If 2.05NA is loaded, the Easy Search Utility will not connect to the NAS. I have tried the version the NAS came with AND the latest version offered. It will see the NAS upon 1st launch of the latest Easy Search Utility, but it will not connect and then it disappears if you relaunch the utility and won't return until a reboot. Bottom Line: it will not connect with 2.05NA loaded. It works fine with 2.02NA.

What is the setting that D-Link has screwed over here also that is causing this problem? It is pretty sad that their own hardware items won't play well together unless you run old FW. What setting D-Link changed that is making the D-Link DIR-825 not connect to the D-Link DNS-323 NAS when the DIR-825 has 2.05NA loaded. I have a DIR-825 Rev. B1 and a DNS-323 NAS with its latest firmware. I am using 2.02NA on the router since that is the only one that works and is the latest stable release(other than the DHCP reserve issue), no matter what D-Link wants to try to make people think. I won't try their support since they NEVER did give me the fix for the QoS upload issue and when I asked them to put it as a sticky in this forum when I found the answer somewhere else....well, there is no sticky as we all know. I would like to be able to have the DHCP Reserve issue working too, but I would like to connect to my NAS more at this point.

View 6 Replies View Related

D-Link DIR-655 :: Virtual Server Settings Doesn't Work Anymore

May 17, 2011

I have several ports opened on my DIR-655 A3, pointing to specific ports on a NAS server i have on my network.

I've already try this:

- Reboot the router

- Erase all Virtual Server Settings and try open only one port

- Re-flash the router with latest European firmware - 1.34b05EU

View 11 Replies View Related

TP-Link 3G/3.75G Router :: MR3420 - Port Forwarding Doesn't Work

Jan 24, 2013

Region : Austria
Model : TL-MR3420
Hardware Version : V2
Firmware Version : TL-MR3420_V2_121206
ISP : 3

I am using a MR3420 V2 together with a E398 modem. The connection works well, but I can't do any port forwarding (virtual server). Using another router (Tiny Dovado) with the same E398 modem works flawlessly to forward ports.

View 14 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3040 Doesn't Work With Windows 7 Machine

Mar 18, 2013

Region : Germany
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP :

Just got TL-MR3040 from amazon, not very happy that it is version 1, they could at least mention it in the description, but whatever...The problem is, i can not make it work with my PC laptop(thinkpad x120e with Windows 7 64 bit). Which means,1 not possible to get into web interface to configure it, and 2 if i configure it with old powerbook (os x 10.4) to share internet from usb stick, i can connect to it's wireless network but it doesn't share internet with my pc laptop,while mac and ipad working perfect...I've try to log in into web interface through the cable, still no luck...Not sure i want to re-install the whole system on my laptop just to see if it will change anything, it works with any other router, and usb sticks...

View 3 Replies View Related

D-Link D-ViewCam :: 3.2 Doesn't Work With More Than Two Cameras Monitored (942-L / 5222-L)

Jul 10, 2012

I have (2) 942-L, and (1) 5222-L on one network.  port forwarding set on router; (942) 192.168.1.3:1024, (942) 192.168.1.4:1025, and (5222) 192.168.1.8:80.  no matter if all 3 are connected to dViewCam, only two will work at a time.  Disconnect any third, and they work fine.  reconnect 3rd, and one disconnects intermittently.  On a side note, if I run a different program on another computer (iMac); i.e. IP Camera Viewer, they all work fine.  I know, I know, but I like DViewCam, because it's the only thing running the PC computer. 

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved