Is there a way to block specific computers on the LAN from specific web sites by the domain name? All I can see is that if I put, for example, www.facebook.com, it will be blocked from all computers on the LAN, whereas if I want to block only 192.168.1.3 for example, I have to use the IP address through the Access Control, which is much harder and ****e to some "work around" by the user.
View 3 RepliesIn Setup > Parental Control it is possible to set rules attached to specific website URLs. I want to block access from 1am to 6am.
However these rules only apply to websites URL. Is there a way to apply a rule to ALL websites at once? I tried to enter "*" or "*.*" in website URL field but it doesn't work.
My company has a peer to peer network of 10 personal computers without a server. Operating systems from Windows XP to Vista. I've recently installed a Cisco RV120W Wireless-N VPN Firewall. It's configured in DHCP Server Mode with printers/copiers that have static IPs below the DHCP range.
I'm having a problem with certain stations being used for personal networking, shopping, etc. during business hours. Consequently I would like to limit internet access on these stations. However, some internet access is required because of online database software that's an integral part of our business. I've been reading in the Administration Guide about URL Blocking. Would it be possible to give static IPs to certain stations and then limit their internet access to 1 or 2 specific websites?
FYI, I've read about the Trusted Domains and Blocked Keywords but cannot quite understand how to parley this into the solution I need.
Like others I see on this board, we've got middle- and high-school age kids whose access to FB and other sites needs to be controlled/scheduled.
I thought the DIR-655 was great, in that it has features that, on the face of it, would seem to be ideal for blocking domains and restricting access.
My problem: I've never been able to get this to work.
I've set up schedules and created lists of domains that I want to limit access to according to the schedules, but the only constraint I've ever gotten to stick is blocking access completely to the router.
*None* of the schedule-based or website-based access controls have ever worked; I'll put the block in place to my daughter's computer's MAC address so she shouldn't be able to get to youtube or facebook, save, bounce the router, but then I go by her room and she's still busily chatting away online to her FB friends.
Based on similar posts I've seen on this forum, this may not be a unique problem.
So in a nutshell, this is what I want to do:
1) Block certain computers (identifiable by MAC address)
2) from being able to get to particular named domains (and any of their sub-domains)
3) according to a schedule that I can create and modify.
My preference would be to do this in the router, but again, responses I've seen here suggest that may not be possible.
I have two webites hosted by the same company. Yesterday I thought their server was down. To make a long story short, everyone I talk to can access the sites and I cant my hosting company says its a router problem. I contacted the service provider and reset the router but that didnt fix it. I have 3 computers on this router and none of them work to access the site. I reset the ip config, I've tryed EI and Firefox. I checked the IE diagnostic log but dont know what it means and it says:
0" ?>
<?xml-stylesheet type='text/xsl' href="xpnetdiag.xsl" ?>
<xpnetdiag>
<title>
[code]....
Can I configure a cisco router 1841 to block specific sites?
View 4 Replies View RelatedHow to block a single website, but I want to do the opposite. I would like to block all website except for a handful of them. Any example configs?
View 3 Replies View RelatedMy roommate and people he invites over keep downloading torrents from public sites and I've gotten 3 emails from Comcast so far. I've talked to him, but I want to make it impossible for him to be able to download them...
I have a Linksys WRT54G router.
I've made 6 internet access policies in the Access Restrictions settings of my router, but for some reason only the 1st policty works. I had 'torrent' as a keyword on the first policy, and when I googled most popular torrent sites it wouldn't let me... so I took 'torrent' off the keyword list and did my google search, and after I wrote down the 40 most popular public torrent sites, I added torrent back as a keyword for website blocking and saved it, but now it doesn't work for some reason. So at first it worked, then I took it off so I could search using the keyword torrent, then I added it back again and saved it and now it doesn't work.
1st policy works (besides the torrent keyword). I have all my policies enabled, have set ip ranges from 0-254 for all of them, and gave them each a name.
How come only the first policy works, and how come all the keywords in the first policy work except one after I deleted it and then re-added it?
I hope this question has not been asked here in the past, as I have googled for answers many times..I live in UAE and the ISP here blocks many sites and services which made me do the following:I have a notebook PC running WindowsXP with two connections to the internet.LAN connected to my ISP which is 30mb/sWLAN connected to the internet through DD-WRT router running OpenVPN and the speed is not that fast.hat I do now is that I have to disable my LAN and access the internet through WLAN (VPN) and have to enable LAN again whenever I need to download large files
View 5 Replies View Relatedi created a blockyoutube policy , when someone types youtube.com, system tells him he cannot access the website. But when a client types https:// he gains normal access .
View 6 Replies View RelatedI have a E4200 V1 router. A website that I have been accessing for years all the sudden no longer works. If I use my PC and PPTP VPN to another location, I can browse the website fine. If I remove the router and plug directly into my Comcast internet connection, I can browse the website fine. If I enable logging on the router, it shows the connection on port 80 just like every other outgoing connection. Security log shows nothing. I was on firmware version 1.0.03, upgraded to 1.0.05. Tried resetting to factory defaults before I updated firmware, and after I updated the firmware. The website all the sudden just stopped working 2 weeks ago. I also tried putting my PC as the DMZ IP address and nothing.
View 1 Replies View RelatedI am getting 404 messages but the browser is connecting to the site's server (you can see the little icon for each site in the tabs). The two sites I have identified that I cannot access are UIowa libraries and Music from Outer Space.
-I have emptied all cache, cookies, etc.
-I have reset the router to factory defaults and updated the firmware
-I can load both sites from other networks, however two different computers using my router fail to load these two sites.Until a couple days ago I was able to access both of these sites regularly, and I haven't installed anything or changed any settings on my computer.The fact that two different computers cannot load these sites seems to indicate that it is a router problem.
Is there an easy way to allow specific websites access in cisco router 1841? I am trying to allow a website through access list 102 but not working. I am using access-list 102 permit ip host 192.168.21.20 host www.website.comIf i allow all websites then it works fine.
View 1 Replies View RelatedI currently use the BEFSR41 router (firmware version 1.04.06). Up until about 10 days ago I had no problem accessing websites affiliated with World of Warcraft [URL].But now, I cannot load any of these sites.Also, when I use the Blizzard Launcher for WoW, the news panel does not load. The game itself, though, loads fine.This is definitely a router issue because when I disconnect the router and connect directly through my cable modem, I can access everything with no problems.These are the only sites my router is blocking. I didn't change any settings on my router so I don't know why it's suddenly blocking things. I reset my router and that didn't work.
View 2 Replies View RelatedHow to block Internet Connection during specific time.for example i want to block everyday between 8am to 12nn, then 1pm to 5pm.what are the options and better to achieve this kind of policy??
View 6 Replies View RelatedI am having ASA firewall 5520. I want to block yahoo mail, gmail using regex for particular users only.
View 5 Replies View RelatedPossible to set up access restrictions to Allow only specific websites?
View 1 Replies View RelatedI inherited a Cisco ASA 5505 and am trying to piggy back the device off of an established Network. Here is the basic layout:
192.168.10.1 (Core Router - Handles DHCP/DNS)
192.168.10.9 (ASA 5505 - Piggy backing off of Network)
192.168.40.x (ASA 5505 - VLAN)
I'm able to get onto the Internet without any problems. Devices from the 192.168.10x Network can not ping the inside VLAN1 (192.168.40.x). However, I would like traffic going from the inside VLAN to the Outside VLAN to be blocked, except for 192.168.10.1 and 192.168.10.9. I've tried using ACL's but end up killing my Internet connection. 192.168.10.1 is the default route and is how I get out to the Internet. Is this possible? Essentially, I'm trying to set up a small Network that guests can connect to. The idea is that they can get to the Internet, but that is it. They can't get to internal resources on the 192.168.10.x Network
Here is the config:
ASA Version 8.2(1)
!
hostname ciscoasa
enable password EeCsulrpu.9LalEE encrypted
[Code].....
I want to share one folder in my network but it can be accessed by only specific computers in the workgroup, not all. How I can do that? I want to restrict other computers.
View 2 Replies View RelatedI was wondering if it is possible to share my internet connection to specific computers on my home network. Both my laptop and desktop computer is connected to the same Wi-Fi router (no internet connection). This network connection is mainly used for file sharing. I want to share the mobile internet connection on my laptop with my pc without giving the other computers on my network access to the internet connection and without disconnecting from the home Wi-Fi router. Is this possible and if so how
View 2 Replies View RelatedOne of our servers recently lost its outbout network connectivity. It can ping and communiate with any computer on our LAN, but it can't communicate with anything outside our network. It has a statically asigned IP address, and can ping the default gateway. We haven't changed any settings on the firewall or gateway....
View 1 Replies View RelatedI just installed the E2500 to replace my older router. With my older router I was able to share files between the different computers in my house. All I did was replace the old router with the new one and now they cant share files? I looked through the router settings and cant find anything showing firewall blocking the file and print sharing. why I cant share the files and how to allow the file sharing?
View 1 Replies View RelatedI'm a college student working on a lab involving a Cisco PIX 501 Firewall.
My project involves 1 computer and a firewall. My goal is to use the firewall to allow access to the internet for that computer which uses a static IP 192.168.1.5 and ONLY for that IP address. The firewall is connected to the internet.
I have the computer hooked up to the firewall with the serial and using hyper terminal to enter commands. I think I need to use access lists in order to deny traffic on those ports for those particular hosts. I can't figure out exactly how I need to set it up.
What I need to do is permit internet access for 192.168.1.5 alone. Any other IP should not be able to access the internet.
I tried:
access-list 1 permit tcp host 192.168.1.5 any eq 80
access-group 1 in interface inside
I cannot access the internet using the computer with 192.168.1.5. The goal is to be able to access with that IP and no other.
I have a Linksys WRT54GS router that I have installed dd-wrt on.My household is overloaded with wireless devices, and living in a home of 6, speeds for everyone seem to slow down drastically later at night when everyone is simultaneously connected and streaming media -- whether it be Netflix, YouTube, etc.. My typical speed wired to the router with no other connections is around 25 mb/s down and 1-2 mb/s up.Obviously, it's going to slow to a crawl when we have an iPad, 3 iPod touches, an iPhone, a Wii (playing Netflix) and 4 PCs all connected simultaneously.What I need to do is give my personal computer priority and throttle all other devices. So that I myself will have decent speeds while hampering all of the other household connections. I rely on those speeds for my job and that should have priority over my brother watching music videos on YouTube.
View 1 Replies View RelatedRegion : India
Model : TL-WR740N
Hardware Version : Not Clear
ISP : BSNL BB
I have a BSNL BB connection. When I use the connection directly, without adding TP Link router, all the websites open flawlessly. Once when I connect the wireless router, certain websites for example Yahoomail, pepperfry.com, yepme.com don't open at all. These are just examples, but I'm unable to access many sites which is a bit annoying. But sites such as gmail, youtube, facebook open clean, there are no issues. I didn't make any configuration changes too. I tried it more than three or four times, but there is a restricted access only.
When I connect through my router, GMail, Livejournal, Yahoo and Facebook and some other sites are really slow, especially Google and Livejournal. If I connect directly to the modem, they are fine. I've reset the modem to factory and it's still slow on both my Vista PC connected with a cable and my GF's Macbook on wifi. I clear the cookies regularly, use CCleaner, scanned for adware, viruses. What do I do?
View 14 Replies View RelatedI can't block web sites on my DIR655
View 3 Replies View RelatedTwo weeks ago my DIR-825 stopped connecting to some URLs. I made no changes to the router nor did I add any new software. If I tether my laptop to my smartphone, I connect to those URLs without any problems. I connected my cable modem directly to the laptop and I was able to connect to the URLs also.
View 7 Replies View RelatedI'm unable to open a few websites through the DIR-825. I can connect the PC to the ISP modem and these sites open just fine. It's not a browser problem.
I've updated to the very latest firmware and still have the problem. I've also researched this issue and can't seem to find a work-around for this issue.
I have dlink dir-600 router and I want to block access to website [ URL] for only one PC connect to router. i can either block web access to both PCS connected or block entire web access to one PC.
View 1 Replies View RelatedOver the past few months I've noticed that, although my USB adapter picks up a good signal from the router (never less than 65 - 70% signal strength) and stays connected to it I am at times unable to access any websites. It started off happening once or twice a week and could happen for about 5 - 10 minutes at a time but now happens several times a day and can stop me accessing the web even though the USB adapter says that it is still picking up the signal from the router. After a period of time it will just start working again, I don't have to restart the router or anything.I've tried changing the channel to a few different ones after using a utility to see what my neighbours were using but this hasn't made a difference. I'm using a Netgear RangeMax Dual Band Wireless-N USB Adapter. It has the N technology so should work pretty well.The current firmware version is 1.00VG dated 5th May 2009. In the router settings it allows you to search for an update for the firmware however it told me that my current version is the most up to date.
View 7 Replies View RelatedOn my server I host several websites.Last Monday we got our FttH-connection and I'd set up my D-Link DIR 655 to manage our server and other computers.In the webconfig of my router I set up the Virtual Server for several applications (Telnet - 23, HTTP - 80, HTTPS - 443, FTP - 21, SMTP - 25, POP3 - 110, IMAP - 143 and also ports 20, 22 en 81) redirected to my server's IP address.For these items the private port and the public port of each item is the same port number; the protocol is TCP for these items. I didn't change the options Schedule ("Always") and Inbound Filter ("Allow All").
The DNS of my domains (samendienen.nl and some other domains) is set to my new IP-address.May be I forgot some other settings in my D-Link-router.what I have to do to make my websites reachable?
I have 4 computers using the DIR-615. One of them works just fine (windows 7) the other ones (XP sp3) are very slow, one of which is on the wireless the others are plugged in.
View 3 Replies View Related