Cisco Firewall :: RV120W - URL Blocking / Limit Internet Access To 1 Or 2 Specific Websites

Aug 18, 2011

My company has a peer to peer network of 10 personal computers without a server.  Operating systems from Windows XP to Vista.  I've recently installed a Cisco RV120W Wireless-N VPN Firewall.  It's configured in DHCP Server Mode with printers/copiers that have static IPs below the DHCP range.
I'm having a problem with certain stations being used for personal networking, shopping, etc. during business hours.  Consequently I would like to limit internet access on these stations.  However, some internet access is required because of online database software that's an integral part of our business.  I've been reading in the Administration Guide about URL Blocking.  Would it be possible to give static IPs to certain stations and then limit their internet access to 1 or 2 specific websites?
FYI, I've read about the Trusted Domains and Blocked Keywords but cannot quite understand how to parley this into the solution I need.

View 1 Replies


D-Link DIR-615 :: Blocking Not One Specific Website But All Websites?

May 16, 2013

In Setup > Parental Control it is possible to set rules attached to specific website URLs. I want to block access from 1am to 6am.

However these rules only apply to websites URL. Is there a way to apply a rule to ALL websites at once? I tried to enter "*" or "*.*" in website URL field but it doesn't work.

View 1 Replies View Related

D-Link DIR-655 :: Blocking Specific Computers On Lan From Websites?

Apr 28, 2011

Is there a way to block specific computers on the LAN from specific web sites by the domain name? All I can see is that if I put, for example,, it will be blocked from all computers on the LAN, whereas if I want to block only for example, I have to use the IP address through the Access Control, which is much harder and ****e to some "work around" by the user.

View 3 Replies View Related

Cisco Routers :: Configure RV120W So That Internet Users Can Access Internal Company Websites?

Apr 4, 2012

How does one configure the router so that Internet users can access internal company websites? The only thing that appears is the Cisco router login. Also I need to configure Terminal Services and its not on the list under Service.

View 2 Replies View Related

Cisco Firewall :: 5510 Blocking All Websites Except Few

Nov 16, 2011

How to block a single website, but I want to do the opposite. I would like to block all website except for a handful of them. Any example configs?

View 3 Replies View Related

D-Link DIR-655 :: Blocking Access To Websites Doesn't Seem To Work

Feb 26, 2012

Like others I see on this board, we've got middle- and high-school age kids whose access to FB and other sites needs to be controlled/scheduled.

I thought the DIR-655 was great, in that it has features that, on the face of it, would seem to be ideal for blocking domains and restricting access.

My problem:  I've never been able to get this to work.

I've set up schedules and created lists of domains that I want to limit access to according to the schedules, but the only constraint I've ever gotten to stick is blocking access completely to the router.

*None* of the schedule-based or website-based access controls have ever worked; I'll put the block in place to my daughter's computer's MAC address so she shouldn't be able to get to youtube or facebook, save, bounce the router, but then I go by her room and she's still busily chatting away online to her FB friends.

Based on similar posts I've seen on this forum, this may not be a unique problem.

So in a nutshell, this is what I want to do:

1) Block certain computers (identifiable by MAC address)

2) from being able to get to particular named domains (and any of their sub-domains)

3) according to a schedule that I can create and modify.

My preference would be to do this in the router, but again, responses I've seen here suggest that may not be possible.

View 1 Replies View Related

Cisco WAN :: Router 1841 - Way To Allow Specific Websites Access

Jan 25, 2011

Is there an easy way to allow specific websites access in cisco router 1841? I am trying to allow a website through access list 102 but not working. I am using access-list 102 permit ip host host i allow all websites then it works fine.

View 1 Replies View Related

Cisco Firewall :: 5520 - URL Blocking To Be Applied To Specific Users

Feb 10, 2010

I am having ASA firewall 5520. I want to block yahoo mail, gmail using regex for particular users only.

View 5 Replies View Related

Cisco :: Blocking Internet Connection During Specific Time

Sep 7, 2012

How to block Internet Connection during specific time.for example i want to block everyday between 8am to 12nn, then 1pm to 5pm.what are the options and better to achieve this kind of policy??

View 6 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Set Up Access Restrictions To Allow Only Specific Websites?

Sep 12, 2012

Possible to set up access restrictions to Allow only specific websites?

View 1 Replies View Related

How To Limit Internet Speed For A Specific Computer

Nov 11, 2011

I have five computers in my shop., and I have 2 Mb speed of Internet connection. want to split internet speed equally for every computer.

View 1 Replies View Related

Routers / Switches :: Rate Limit On Specific Port From Specific Range?

Jul 1, 2012

Is it possible to enable an absolute value rate limit using QOS on a HP ProCurve 5406 switch for a particular IP range on a specific port? Is there a way to configure our HP 5406 with an absolute rate limit on "WAN" port for that server's IP range? I would like to limit it to only being capable of sending 1Mbps worth of traffic over the head end at once.Everything in the documentation points towards priority queues, which as far as I can tell, isn't really what I want.Baring accomplishing this goal using rate limiting is there a better way to prevent our services from accidentally saturating this connection?i thimkong about somthing like that:

class ipv4 rate-limit-port-A1
match ip any
policy qos port-a1-ratelimit
class servers-to-be-slowed action rate-limit kbps 1000
interface A1 service-policy port-a1-ratelimit inI'm not sure about this.

View 4 Replies View Related

Linksys Wireless Router :: E3000 Possible To Limit Access For Specific Device (PC) To LAN Only

Dec 31, 2012

Within the Internet Access Policy section of the browser based utility, is it possible to limit access for a specific device (PC) to LAN only (not allow any traffic to external internet)?  I see that you can block internet access for a specific machine, however I didn't know if this was inclusive of LAN as well.If not, is there another way to achieve this via the E3000 or should I be looking for a solution on the specific PC itself? 

View 4 Replies View Related

Cisco Firewall :: Asa 5510 Blocks HTTPS Access To Internet Websites

Jan 20, 2013

I have installed a new ASA5510 with CSC, and everything is working properly except the access to websites using https. All sites/access to them seem to be blocked by the ASA. I have read that this access is by default enabled and I have tried to add configuration to allow https access to the firewall but without success. [code]

View 6 Replies View Related

Cisco Firewall :: Allowing Internet Access Only For Specific Computers On PIX 501?

Jan 8, 2012

I'm a college student working on a lab involving a Cisco PIX 501 Firewall.
My project involves 1 computer and a firewall. My goal is to use the firewall to allow access to the internet for that computer which uses a static IP and ONLY for that IP address. The firewall is connected to the internet.
I have the computer hooked up to the firewall with the serial and using hyper terminal to enter commands. I think I need to use access lists in order to deny traffic on those ports for those particular hosts. I can't figure out exactly how I need to set it up.
What I need to do is permit internet access for alone. Any other IP should not be able to access the internet.
I tried:
access-list 1 permit tcp host any eq 80
access-group 1 in interface inside
I cannot access the internet using the computer with The goal is to be able to access with that IP and no other.

View 6 Replies View Related

Cisco Firewall :: Internet Access Through ASA 5540 For Specific Network Object Group

May 2, 2011

I have a 5540, and i am trying to allow access to internet for an specific network object group, who has inside a bunch of users, who needs direct internet access without any restrictions, i have tried with dynamic NAT, but that configuration ask for a specific IP o a Network range, and is not permitted to configure an  object group as a source
The group is located in LAN zone, so a permission from one zone to another zone is needed i think, but i can allow the internet acess to that group Is there another way to get that , different from NAT ?

View 5 Replies View Related

Cisco Routers :: RV120W - QoS Bandwidth Rate Limit Don't Work

Aug 21, 2011

Buy a router RV120W, and one of the reasons is limit of bandwidth (QoS). I set up a profile of 1-256 kbps limit, and apply it to the only VLAN that is configured, but does not work and can navigate using the full bandwidth of the internet connection. My firmware version is

View 8 Replies View Related

Blocking Websites Using Cisco Router 1841?

Feb 1, 2011

Can I configure a cisco router 1841 to block specific sites?

View 4 Replies View Related

Cannot Connect To Specific Websites

Apr 14, 2011

I have two webites hosted by the same company. Yesterday I thought their server was down. To make a long story short, everyone I talk to can access the sites and I cant my hosting company says its a router problem. I contacted the service provider and reset the router but that didnt fix it. I have 3 computers on this router and none of them work to access the site. I reset the ip config, I've tryed EI and Firefox. I checked the IE diagnostic log but dont know what it means and it says:

0" ?>
<?xml-stylesheet type='text/xsl' href="xpnetdiag.xsl" ?>


View 19 Replies View Related

WRT54G Blocking Websites With Linksys Router

Sep 20, 2011

My roommate and people he invites over keep downloading torrents from public sites and I've gotten 3 emails from Comcast so far. I've talked to him, but I want to make it impossible for him to be able to download them...

I have a Linksys WRT54G router.

I've made 6 internet access policies in the Access Restrictions settings of my router, but for some reason only the 1st policty works. I had 'torrent' as a keyword on the first policy, and when I googled most popular torrent sites it wouldn't let me... so I took 'torrent' off the keyword list and did my google search, and after I wrote down the 40 most popular public torrent sites, I added torrent back as a keyword for website blocking and saved it, but now it doesn't work for some reason. So at first it worked, then I took it off so I could search using the keyword torrent, then I added it back again and saved it and now it doesn't work.

1st policy works (besides the torrent keyword). I have all my policies enabled, have set ip ranges from 0-254 for all of them, and gave them each a name.

How come only the first policy works, and how come all the keywords in the first policy work except one after I deleted it and then re-added it?

View 3 Replies View Related

Specific Connection To Use For Certain Websites Or Services?

Nov 13, 2011

I hope this question has not been asked here in the past, as I have googled for answers many times..I live in UAE and the ISP here blocks many sites and services which made me do the following:I have a notebook PC running WindowsXP with two connections to the internet.LAN connected to my ISP which is 30mb/sWLAN connected to the internet through DD-WRT router running OpenVPN and the speed is not that fast.hat I do now is that I have to disable my LAN and access the internet through WLAN (VPN) and have to enable LAN again whenever I need to download large files

View 5 Replies View Related

Cisco Wireless :: Linksys E4200 Arbitrarily Blocking Websites

Apr 19, 2013

I have a E4200 V1 router.  A website that I have been accessing for years all the sudden no longer works.  If I use my PC and PPTP VPN to another location, I can browse the website fine.  If I remove the router and plug directly into my Comcast internet connection, I can browse the website fine.  If I enable logging on the router, it shows the connection on port 80 just like every other outgoing connection.  Security log shows nothing.  I was on firmware version 1.0.03, upgraded to 1.0.05.  Tried resetting to factory defaults before I updated firmware, and after I updated the firmware.  The website all the sudden just stopped working 2 weeks ago.  I also tried putting my PC as the DMZ IP address and nothing.

View 1 Replies View Related

Security / Firewalls :: Cyberoam Not Blocking Https Websites?

Jan 21, 2013

i created a blockyoutube policy , when someone types, system tells him he cannot access the website. But when a client types https:// he gains normal access .

View 6 Replies View Related

Linksys Wireless Router :: E1000 Seems To Be Blocking Websites All Of A Sudden?

Oct 29, 2011

I am getting 404 messages but the browser is connecting to the site's server (you can see the little icon for each site in the tabs).  The two sites I have identified that I cannot access are UIowa libraries and Music from Outer Space.

-I have emptied all cache, cookies, etc.

-I have reset the router to factory defaults and updated the firmware

-I can load both sites from other networks, however two different computers using my router fail to load these two sites.Until a couple days ago I was able to access both of these sites regularly, and I haven't installed anything or changed any settings on my computer.The fact that two different computers cannot load these sites seems to indicate that it is a router problem.

View 3 Replies View Related

Cisco Routers :: Rv120w VPN Tunnel From Internet / Cannot Access Remote Servers

Feb 23, 2012

I have setup a site-to-site VPN tunnel between 2 sites using CISCO rv120w.Everything works fine; any PC on one site can access all systems on the other site and vice-versa.The issue I have is when I start a VPN connection another site on Internet using IPSecuritas.I can initiate a VPN to site 1 and site 2; but when connected, I can only access servers that are located into the same site I'm connected to; I cannot ping the remote site.The Range of IP addresses on the internet during my tests is (I 'm using a Mac)

-Systems with IP and are bridges
-Systems with IP and are CISCO rv120w

View 4 Replies View Related

Cisco Routers :: RV120W / Configure Bridge Mode For Internet Access?

Jan 1, 2013

We have a RV120W Wireless-N VPN Firewall and we want to configure the router in brigde mode (transparent). Because we have another Firewall, use for filtering and default gateway on the LAN. The ISP provide IP address by DHCP, so we must connect the internet connexion to the WAN interface. But How can we do for connected the RV120W to our firewall? The router mode on the RV120w allows-it to make this configuration?

View 1 Replies View Related

Cisco Firewall :: Cannot Access Certain Websites Behind PIX 501 With 6.2 FW

Oct 9, 2012

I have a PIX 501 with 6.2 FW.  The firewall inside network is connected to a Windows server (Mailserver).  I can get access to most websites on all clients as well as on the server.  However, there are some particular websites, such as that the server and all but one client cannot access.  I get a "cannot display the webpage" in internet explorer.
I have disabled the Windows firewall and AV.  I have also scanned for any malware and no malware was found.
I found on the forums a "fixup protocol dns" solution, but my PIX version does not support it.
Below is my config:
PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100


View 12 Replies View Related

Linksys Wired Router :: BEFSR41 Blocking World Of Warcraft Websites?

Sep 16, 2007

I currently use the BEFSR41 router (firmware version 1.04.06). Up until about 10 days ago I had no problem accessing websites affiliated with World of Warcraft [URL].But now, I cannot load any of these sites.Also, when I use the Blizzard Launcher for WoW, the news panel does not load. The game itself, though, loads fine.This is definitely a router issue because when I disconnect the router and connect directly through my cable modem, I can access everything with no problems.These are the only sites my router is blocking. I didn't change any settings on my router so I don't know why it's suddenly blocking things. I reset my router and that didn't work.

View 2 Replies View Related

Cisco Firewall :: 2800 - Blocking Url Access?

Jan 30, 2012

I wish to block some url that users have access through my LAN
Thats  i wish to block icmp,access towards such sites, i wish to block icmp  because dns will resolve the domain and they can access through ip  address.
what i have in place is a cisco 2800 series routers

View 2 Replies View Related

Cisco Switching/Routing :: ASA 5505 - Blocking Traffic To Specific IP Addresses

Sep 24, 2012

I inherited a Cisco ASA 5505 and am trying to piggy back the device off of an established Network.  Here is the basic layout: (Core Router - Handles DHCP/DNS) (ASA 5505 - Piggy backing off of Network)
192.168.40.x (ASA 5505 - VLAN)
I'm able to get onto the Internet without any problems.  Devices from the 192.168.10x Network can not ping the inside VLAN1 (192.168.40.x).  However, I would like traffic going from the inside VLAN to the Outside VLAN to be blocked, except for and  I've tried using ACL's but end up killing my Internet connection. is the default route and is how I get out to the Internet.  Is this possible?  Essentially, I'm trying to set up a small Network that guests can connect to.  The idea is that they can get to the Internet, but that is it. They can't get to internal resources on the 192.168.10.x Network
Here is the config:
ASA Version 8.2(1)
hostname ciscoasa
enable password EeCsulrpu.9LalEE encrypted


View 5 Replies View Related

Cisco Firewall :: 5510-K8 Why Can't Access Same Websites On Restricted PC

Nov 18, 2012

Has ASA5510-K8 as firewall, has access rules setup for restricted PCs: [code] permitOn those PCs, users can only browse the websites that are in favorites, but some of them are working, some are not.Test on unrestricted PC, websites that can’t be accessed from public PCs can be access on regular PCs , either by address or IP.Checked GPO setting, don’t see anything wrong there.

View 4 Replies View Related

Cisco Firewall :: 2801 Cannot Access External Websites That Use FTP

Dec 26, 2012

I am having an issue where I cannot access certain files on websites. It looks as though the files are accessed via ftp. Could my router be blocking it. I have a Cisco 2801 router acting as a firewall.

View 13 Replies View Related

Cisco Firewall :: Pix 506E - Clients Do Not Access Some Websites?

Feb 27, 2012

I have a problem with PIX 506E that meets the version 6.1, and in an simple computer network equipment seems to behave in strange ways because some web sites do not open or very open slow thereby its operation impracticable. On the other hand other web sites open normally.
Querying the web site of the Cisco, I found several documents discussing the same problem but in a later version ( 7.0 ), not in this version 6.1.
I've tried removing the pix from the network , not the error occurred, again insert pix however tested only with a machine, without the rest of the network and the problem persists

View 13 Replies View Related

Copyrights 2005-15, All rights reserved